Innovation

Innovation can be defined broadly to include the development and uptake of new technology, the introduction of new products, the utilisation of new market opportunities and the implementation of new business processes including new forms of work organisation or management structures and approaches. Innovation, or the commercial application of new knowledge, is of increasing importance to economic competitiveness given the growth in production and trade in high technology industries and knowledge intensive service sectors such as business services (Edquist, Hommen and McKelvey 2001). An important field of innovation in modern economies is associated with the rapid development and application of information and communications technologies (ICTs). ICTs constitute an increasing share of value added, growth and employment and also impact on employment and productivity in other industry sectors. The structural transformation of modern economies associated with ICTs has led to an increase in the importance of information and knowledge resources (rather than physical capital) as inputs or factors of production. Technology and product innovations are often given central attention in innovation research, however, organisational and managerial changes have been recognised as critical. Over the last two decades, understandings of the nature and process of innovation have advanced significantly. In the 1950s and 1960s, there was a view that innovation resulted from basic research, or in essence that scientific research acted as a 'push' for innovation. As such there was a great deal of emphasis on formal research and development, undertaken either by governments or research and development units within business organisations. Radical innovations involving new products and new technological trajectories were thought to derive from basic research (Freeman 1995).

Building eResearch Services, Capabilities and Capacity

The Queensland University of Technology (QUT) is known for several flagship eResearch centres. It also has a number of mature, centralised research support services that address a several of areas of eResearch. The university has openly stated its aspiration to be an institution with a strongly embedded eResearch capability and to this end it has expressed the desire to establish a university-wide eResearch support service. However, articulating this desire is much easier than realising it. During 2008 QUT undertook a major review into eResearch that made recommendations on the development of university-wide eResearch support service and the building of eResearch capabilities and capacity throughout the university. The results of this review were reported last year at this conference. In 2009, QUT is progressing a second, follow-on project – Building eResearch Support Capability and Capacity. It has been designed to build upon existing strengths in HPC, repositories, data management, and the delivery of integrated skills for eresearch. The purpose of this presentation is to give an update on QUT’s journey, one year on from its first major report into eResearch. It will outline how the university is approaching this challenge, the current work being carried out and the strategies being employed. We will also discuss the lessons learned.

Modelling sustainable and optimal solutions for building services integration in early architectural design : confronting the software and professional interoperability deficit

Decisions made in the earliest stage of architectural design have the greatest impact on the construction, lifecycle cost and environmental footprint of buildings. Yet the building services, one of the largest contributors to cost, complexity, and environmental impact, are rarely considered as an influence on the design at this crucial stage. In order for efficient and environmentally sensitive built environment outcomes to be achieved, a closer collaboration between architects and services engineers is required at the outset of projects. However, in practice, there are a variety of obstacles impeding this transition towards an integrated design approach. This paper firstly presents a critical review of the existing barriers to multidisciplinary design. It then examines current examples of best practice in the building industry to highlight the collaborative strategies being employed and their benefits to the design process. Finally, it discusses a case study project to identify directions for further research.

Developing a culture of enquiry to sustain evidence-based practice

Evidence-based practice (EBP) is having a significant effect on the health service environment. It constructs a language that bridges the healthcare disciplines and the clinical and managerial components of health services. Most experienced clinicians in nursing, medicine and allied health now recognise that the contemporary healthcare environment calls for our practice to be justified by sound, credible evidence. There is pressure on all clinicians to accommodate innovation, while at the same time ensuring their practice is effective, safe and efficient (Forbes & Griffiths 2002). Consequently, EBP in healthcare is having a profound effect on nursing and the way we think about nursing. There are many available models for research utilisation that are dependent on organisational strategies for change. This chapter describes the relationship between organisation and culture, and explores the notion of cultural change; that is, developing a culture of inquiry that can sustain evidence-based practice. We begin this chapter with a clear conception of what we mean by EBP and what we mean by ‘culture’.

Preliminary review of over-regulation in Australian financial services

This article examines a preliminary review and the limited evidence of over-regulation in Australian financial services. The 1997 Wallis Report and the CLERP 6 paper resulted in the amendments to Ch 7 of the Corporations Act 2001 (Cth) by the Financial Services Reform Act. Nearly a decade later the system based upon 'one-size fits all' dual track regime and a consistent licensing regime has greatly increased the costs of compliance. In the area of enforcement there has not been a dramatic change to the effective techniques applied by ASIC over other agencies such as APRA. In particular there are clear economic arguments, as well as international experiences which state that a single financial services regulator is more effective than the multi-layered approach adopted in Australia. Finally, in the superannuation area of financial services, which is worth A$800 billion there is unnecessary dual licensing and duplicated regulation with little evidence of any consumer-member benefit but at a much greater cost

The impact of distributional preferences on (experimental) markets for expert services

Theory predicts that efficiency prevails on credence goods markets if customers are able to verify which quality they receive from an expert seller. In a series of experiments with endogenous prices we observe that verifiability fails to result in efficient provision behaviour and leads to very similar results as a setting without verifiability. Some sellers always provide appropriate treatment even if own money maximization calls for over- or undertreatment. Overall our endogenous-price-results suggests that both inequality aversion and a taste for efficiency play an important role for experts’ provision behaviour. We contrast the implications of those two motivations theoretically and discriminate between them empirically using a fixed-price design. We then classify experimental experts according to their provision behaviour.

Book review : "Community engagement in contemporary legal education : Pro Bono, Clinical legal education and services learning"

The result of a forum on community engagement held in November 2008 at Bond University, Community Engagement in Contemporary Legal Education is a compilation of papers presented at the forum by academics and professionals throughout Australia. Although found initially to be a topic of legal interest, it was not until the reviewer came across the Council of Australian Law Deans (CALD) “Standards for Australian Law Schools” (adopted 17 November 20093) then the full importance and potential of this book was revealed. Clause 2.2.4 of the CALD Standards recognises the importance of “experiential learning opportunities” for law students and cites examples such as clinical programs, internships, practical experience and pro-bono work. Clause 2.3.3 acknowledges the need to develop professional ethics and again cites pro-bono obligations as an example. Clause 9.6.2 encourages interaction of law schools with the profession and the community and again, pro-bono community service is identified as one method of doing so. Yet nowhere in the document are there any uniform standards or binding obligations that law schools must commit to. In the current climate where the importance of practical experience is continually emphasised and student numbers exceed the number of available paid legal positions, there should be more focus on the details of how these commitments should be converted to be included in a law school’s curriculum.

Coordinated research support services at Queensland University of Technology, Australia

Queensland University of Technology (QUT) is a large multidisciplinary university located in Brisbane, Queensland, Australia. QUT is increasing its research focus and is developing its research support services. It has adopted a model of collaboration between the Library, High Performance Computing and Research Support (HPC) and more broadly with Information Technology Services (ITS). Research support services provided by the Library include the provision of information resources and discovery services, bibliographic management software, assistance with publishing (publishing strategies, identifying high impact journals, dealing with publishers and the peer review process), citation analysis and calculating authors’ H Index. Research data management services are being developed by the Library and HPC working in collaboration. The HPC group within ITS supports research computing infrastructure, research development and engagement activities, researcher consultation, high speed computation and data storage systems , 2D/ 3D (immersive) visualisation tools, parallelisation and optimization of research codes, statistics/ data modeling training and support (both qualitative and quantitative) and support for the university’s central Access Grid collaboration facility. Development and engagement activities include participation in research grants and papers, student supervision and internships and the sponsorship, incubation and adoption of new computing technologies for research. ITS also provides other services that support research including ICT training, research infrastructure (networking, data storage, federated access and authorization, virtualization) and corporate systems for research administration. Seminars and workshops are offered to increase awareness and uptake of new and existing services. A series of online surveys on eResearch practices and skills and a number of focus groups was conducted to better inform the development of research support services. Progress towards the provision of research support is described within the context organizational frameworks; resourcing; infrastructure; integration; collaboration; change management; engagement; awareness and skills; new services; and leadership. Challenges to be addressed include the need to redeploy existing operational resources toward new research support services, supporting a rapidly growing research profile across the university, the growing need for the use and support of IT in research programs, finding capacity to address the diverse research support needs across the disciplines, operationalising new research support services following their implementation in project mode, embedding new specialist staff roles, cross-skilling Liaison Librarians, and ensuring continued collaboration between stakeholders.

Combining the parts to make the whole : integrated child and family services in Queensland

Over the past decade, the promotion of 'integrated child and family services' has emerged as a strong and consistent theme within Australian early childhood policy. Fuelling this trend is the belief that integrated service provision is more responsive to holistic family needs, offering better support to parents and thereby promoting better outcomes for young children. Adding further strength is the prevention and early intervention literature, and suggested social and economic benefits of 'effective' early years services and supports. States and territories are introducing new integrated child and family service models and Reflections is continuing to profile these. In this edition, we look at directions and new service models in Queensland, in particular, the new Early Years Centre service model.

Promoting child protection : early childhood education and care services playing their part

Over recent years, there has been a shift in government social policy in Australia toward interest and investment in family support, prevention and early intervention. Central to this new approach to supporting families and promoting better outcomes for children is the development of a continuum of services able to respond to different and changing family needs. This continuum or integrated service system seeks to better connect key human services, such as health, child care, education and family support. This paper explores the role of early childhood education and care (ECEC) services in promoting child protection and strengthening the safety and wellbeing of children.

Sourcing business and software services

With the advancement of Service-Oriented Architecture in the technical and business domain, the management & engineering of services requires a thorough and systematic understanding of the service lifecycle for both business and software services. However, while service-oriented approaches acknowledge the importance of the service ecosystem, service lifecycle models are typically internally focused, paying limited attention to processes related to offering services to or using services from other actors. In this paper, we address this need by discussing the relations between a comprehensive service lifecycle approach for service management & engineering and the sourcing & purchasing of services. In particular we pay attention to the similarities and differences between sourcing business and software services, the alignment between service management & engineering and sourcing & purchasing, the role of sourcing in the transformation of an organization towards a service-oriented paradigm, the role of architectural approaches to sourcing in this transformation, and the sourcing of specific services at different levels of granularity.

Detection and prevention of distributed denial of services attacks by collaborative effort of software agents, first prototype implementation

Distributed Denial of Services DDoS, attacks has become one of the biggest threats for resources over Internet. Purpose of these attacks is to make servers deny from providing services to legitimate users. These attacks are also used for occupying media bandwidth. Currently intrusion detection systems can just detect the attacks but cannot prevent / track the location of intruders. Some schemes also prevent the attacks by simply discarding attack packets, which saves victim from attack, but still network bandwidth is wasted. In our opinion, DDoS requires a distributed solution to save wastage of resources. The paper, presents a system that helps us not only in detecting such attacks but also helps in tracing and blocking (to save the bandwidth as well) the multiple intruders using Intelligent Software Agents. The system gives dynamic response and can be integrated with the existing network defense systems without disturbing existing Internet model. We have implemented an agent based networking monitoring system in this regard.

Predicting active material utilisation in LiFePO4 electrodes using a multi-scale mathematical model

A mathematical model is developed to simulate the discharge of a LiFePO4 cathode. This model contains 3 size scales, which match with experimental observations present in the literature on the multi-scale nature of LiFePO4 material. A shrinking-core is used on the smallest scale to represent the phase-transition of LiFePO4 during discharge. The model is then validated against existing experimental data and this validated model is then used to investigate parameters that influence active material utilisation. Specifically the size and composition of agglomerates of LiFePO4 crystals is discussed, and we investigate and quantify the relative effects that the ionic and electronic conductivities within the oxide have on oxide utilisation. We find that agglomerates of crystals can be tolerated under low discharge rates. The role of the electrolyte in limiting (cathodic) discharge is also discussed, and we show that electrolyte transport does limit performance at high discharge rates, confirming the conclusions of recent literature.