Collaborative academic/practitioner research in project management : theory and models

Purpose – The purpose of this paper is to provide of a review of the theory and models underlying project management (PM) research degrees that encourage reflective learning. Design/methodology/approach – Review of the literature and reflection on the practice of being actively involved in conducting and supervising academic research and disseminating academic output. The paper argues the case for the potential usefulness of reflective academic research to PM practitioners. It also highlights theoretical drivers of and barriers to reflective academic research by PM practitioners. Findings – A reflective learning approach to research can drive practical results though it requires a great deal of commitment and support by both academic and industry partners. Practical implications – This paper suggests how PM practitioners can engage in academic research that has practical outcomes and how to be more effective at disseminating these research outcomes. Originality/value – Advanced academic degrees, in particular those completed by PM practitioners, can validate a valuable source of innovative ideas and approaches that should be more quickly absorbed into the PM profession’s sources of knowledge. The value of this paper is to critically review and facilitate a reduced adaptation time for implementation of useful reflective academic research to industry.

Reflections around artefacts : using a deliberative approach to teaching reflective practices in fashion studies

While requiring students to think reflectively is a desirable teaching goal, it is often fraught with complexity and is sometimes poorly implemented in higher education. In this paper, we describe an approach to academic reflective practices that fitted a design subject in fashion education and was perceived as effective in enhancing student learning outcomes. In many design-based disciplines, it is essential to evaluate, through a reflective lens, the quality of tangible design outcomes - referred to here as artefacts. Fashion studio based practice (unlike many other theory based disciplines)requires an artefact to be viewed in order to initiate the reflective process. This reflection is not solely limited to reflective writing; the reflection happens through sight, touch and other non-traditional approaches. Fashion students were asked to reflect before, during and after the development of an artefact. Through a variety of media, a review of the first garment prototype - called a Sample Review - occurred. The reflective practices of students during the Sample Review provided a valuable insight into their own learning, as well as a valid assessment indicator for the lecturer. It also mirrored industry practices for design evaluation. We believe that this deliberative approach, characterised by artefact-prompted reflection, has wide applicability across undergraduate courses in a variety of discipline areas.

Like our page : using Facebook to support first year students in their transition to higher education

Facebook is approaching ubiquity in the social habits and practice of many students. However, its use in higher education has been criticised (Maranto & Barton, 2010) because it can remove or blur academic boundaries. Despite these concerns, there is strong potential to use Facebook to support new students to communicate and interact with each other (Cheung, Chiu, & Lee, 2010). This paper shows how Facebook can be used by teaching staff to communicate more effectively with students. Further, it shows how it can provide a way to represent and include beginning students’ thoughts, opinions and feedback as an element of the learning design and responsive feed-forward into lectures and tutorial activities. We demonstrate how an embedded social media strategy can be used to complement and enhance the first year curriculum experience by functioning as a transition device for student support and activating Kift’s (2009) organising principles for first year curriculum design.

Integration of medical images to the teaching of systematic pathology : an evaluation of relevance

A sound knowledge of pathological disease processes is required for professional practice within health professions. The project described in this paper reviewed the resources currently available for the delivery of systematic pathology tutorials. Additional complementary resources were developed and the inclusion of these additional learning resources in practical tutorial sessions was evaluated for their impact on student learning. Student evaluation of the learning resources was undertaken across one semester with two different cohorts of health profession students using questionnaires and focus group discussion. Both cohorts reported an enhancement to their understanding of pathological disease processes through the use of the additional resources. Results indicate student perception of the value of the resources correlates with staff perception and is independent of prior experiences.

New organisational leadership capabilities : transitional engineer the new designer?

Traditionally, design has been centred within the manufacturing and production areas of companies and or as a styling afterthought. Increasingly, design is viewed as a vital and important strategic business resource (Dell’Era, Marchesi & Verganti, 2010) and consequently companies worldwide look to design to help them innovate, differentiate and compete in the global marketplace. The role of the professional designer is evolving to a point where they are needed to work beyond being a specialist in the manufacturing and aesthetics of an artefact (Wrigley & Bucolo, 2011). This paper challenges the values held by academics and industry regarding the traditional role of designers in business. It investigates the emerging transitional engineering framework and puts forward a proposal for the next generation designer in the future era of design. Questions surrounding how designers will develop these new skills and how the Authors’ new framework of design led innovation can contribute to the future of design will be presented. This research is needed to better equip future designers to have a more central role in business.

A framework for determining the authenticity of assessment tasks : applied to an example in law

Authentic assessment tasks enhance engagement, retention and the aspirations of students. This paper explores the discipline-generic features of authentic assessment, which reflect what students need to achieve in the real world. Some assessment tasks are more authentic than others and this paper designs a proposed framework supported by the literature that aids unit co-ordinators to determine the level of authenticity of an assessment task. The framework is applied to three summative assessment tasks, that is, tutorial participation, advocacy exercise and problem-based exam, in a law unit. The level of authenticity of the assessment tasks is compared and opportunities to improve authenticity are identified.

Embedding environmental sustainability in the undergraduate chemistry curriculum : a case study

In spite of increasing attention devoted to the importance of embedding sustainability in university curricula, few Australian universities include specific green chemistry units, and there is no mention of green or sustainable chemistry concepts in the majority of units. In this paper, an argument is posited that all universities should embed sustainable chemistry within all Chemistry courses because it is the morally correct stance to minimise the harm of climate change. Attitudes of chemistry lecturers towards integrating sustainability into their teaching have been probed and it was found, using an established model, that personal environmental perspectives are critical to their attitude. Importantly, academic staff whose research has an environmental component were more likely to incorporate sustainability into their teaching while others struggled to find ways to do so even when they believed it to be important. This paper will recommend that resources are required to assist academic staff without a green chemistry research program to incorporate sustainability into their teaching and several suggestions are provided.

Sociocultural affordances of online peer engagement

University learning increasingly includes online learning experiences embedded within teaching with the dual policy intentions of increasing flexibility and learner engagement. In this research project, three university lecturers from different teaching contexts selected technologies for online learning to enhance learner engagement by encouraging peer learning. A sociocultural view of learning was used to conceptualise the technological and social affordances that might enable student peer participation and engagement. The research explored the question: “What are the benefits and barriers experienced by students engaging in online peer collaboration?” Students reported benefits including a sense of belonging that enhanced motivation, and professional identity. This article also reports on some of the challenges for students and University academics when engaging in online learning communities.

Understanding preconditions for digital school transformation

While over the past decade many Australian schools have come to understand the transformative potential of digitally-rich teaching and learning, traditional models of schooling continue to dominate. Even with significant investment in the area, both in terms of digital resourcing and teacher professional development, innovation has generally only occurred in individual classrooms or ‘pockets’ in schools. This article discusses three interdependent conditions which need to exist as a foundation in order to facilitate the opportunity for transformation from traditional to digitally-rich ways of working in primary, middle and secondary schools or colleges. Distributed and transformational leadership approaches are critiqued with core elements identified which facilitate change. The establishment of a vision is identified and discussed as a fundamental driver and rudder for school transformation. The importance of creating and maintaining urgency to compel a school community to adopt and embed change is unpacked. This report concludes with a synthesis of the three preconditions and recommendations for proponents of digital school transformation.

‘Teachers flipping out’ beyond the online lecture : maximising the educational potential of video

While video is recognised as an important medium for teaching and learning in the digital age, many video resources are not as effective as they might be, because they do not adequately exploit the strengths of the medium. Presented here are some case studies of video learning resources produced for various courses in a university environment. This ongoing project attempts to identify pedagogic strategies for the use of video; learning situations in which video has the most efficacy; and what production techniques can be employed to make effective video learning resources.

Developing a culture of peer review of teaching through a distributive leadership approach

Teaching is a core function of higher education and must be effective if it is to provide students with learning experiences that are stimulating, challenging and rewarding Obtaining feedback on teaching is indispensable to enhancing the quality of learning design, facilitating personal and/or professional development and maximising student learning outcomes. Peer review of teaching has the potential to improve the quality of teaching at tertiary level, by encouraging critical reflection on teaching, innovation in teaching practice and scholarship of teaching at all academic levels. However, embedding peer review within the culture of teaching and learning is a significant challenge that requires sustained commitment from senior leadership as well as those in leadership roles within local contexts.

Teaching and assessing ethics and social responsibility in undergraduate science : a position paper

Institutional graduate capabilities and discipline threshold learning outcomes require science students to demonstrate ethical conduct and social responsibility. However, neither the teaching nor the assessment of these concepts is straightforward. Australian chemistry academics participated in a workshop in 2013 to discuss and develop teaching and assessment in these areas and this paper reports on the outcomes of that workshop. Controversial issues discussed included: How broad is the mandate of the teacher, how should the boundaries between personal values and ethics be drawn, and how can ethics be assessed without moral judgement? In this position paper, I argue for a deep engagement with ethics and social justice, achieved through case studies and assessed against criteria that require discussion and debate. Strategies to effectively assess science students’ understanding of ethics and social responsibility are detailed.

STEM education for sustainable development : a sociotechnical analysis

It is debated that for sustainable STEM education and knowledge investment, human centered learning design approach is critical and important. Sustainability in this context is enduring maintenance of technological trajectories for productive economical and social interactions by demonstrating life critical scenarios through life critical system development and life experiences. Technology influences way of life and the learning and teaching process. Social software application development is more than learning of how to program a software application and extracting information from the Internet. Hence, our research challenge is, how do we attract learners to STEM social software application development? Our realisation processes begin with comparing Science and Technology education in developed (e.g., Australia) and developing (e.g., Sri Lanka) countries with distinction on final year undergraduates’ industry ready training programmes. Principal components analysis was performed to separate patterns of important factors. To measure behavioural intention of perceived usefulness and attitudes of the training, the measurement model was analysed to test its validity and reliability using partial least square (PLS) analysis of structural equation modelling (SEM). Our observation is that the relationship is more complex than we argue for. Our initial conclusions were that life critical system development and life experience trajectories as determinant factors while technological influences were unavoidable. A further investigation should involve correlations between human centered learning design approach and economical development in the long run.