Biodiesel production from non-edible beauty leaf (Calophyllum Inophyllum) oil : process optimization using response surface methodology (RSM)

In recent years, the beauty leaf plant (Calophyllum Inophyllum) is being considered as a potential 2nd generation biodiesel source due to high seed oil content, high fruit production rate, simple cultivation and ability to grow in a wide range of climate conditions. However, however, due to the high free fatty acid (FFA) content in this oil, the potential of this biodiesel feedstock is still unrealized, and little research has been undertaken on it. In this study, transesterification of beauty leaf oil to produce biodiesel has been investigated. A two-step biodiesel conversion method consisting of acid catalysed pre-esterification and alkali catalysed transesterification has been utilized. The three main factors that drive the biodiesel (fatty acid methyl ester (FAME)) conversion from vegetable oil (triglycerides) were studied using response surface methodology (RSM) based on a Box-Behnken experimental design. The factors considered in this study were catalyst concentration, methanol to oil molar ratio and reaction temperature. Linear and full quadratic regression models were developed to predict FFA and FAME concentration and to optimize the reaction conditions. The significance of these factors and their interaction in both stages was determined using analysis of variance (ANOVA). The reaction conditions for the largest reduction in FFA concentration for acid catalysed pre-esterification was 30:1 methanol to oil molar ratio, 10% (w/w) sulfuric acid catalyst loading and 75 °C reaction temperature. In the alkali catalysed transesterification process 7.5:1 methanol to oil molar ratio, 1% (w/w) sodium methoxide catalyst loading and 55 °C reaction temperature were found to result in the highest FAME conversion. The good agreement between model outputs and experimental results demonstrated that this methodology may be useful for industrial process optimization for biodiesel production from beauty leaf oil and possibly other industrial processes as well.

Female genital cutting : An overview of Australian legal principles, ethical controversies, and medical, legal and social challenges

Female genital cutting (also often called female genital mutilation, or female circumcision) is a cultural practice that originated thousands of years ago. Female genital cutting has various forms, some of which are more invasive than others, but all of which produce health, legal and social consequences for those involved. Due to patterns of immigration in Australia, especially since the 1990s, there are women in Australia who have experienced female genital cutting. There may be some families, or some parents, who still hold a cultural commitment to female genital cutting. As a result, female genital cutting presents complex legal, ethical, medical and social challenges in contemporary Australian society. Medical practitioners and other health and welfare workers may encounter women who have experienced genital cutting and who require treatment for its sequelae. Currently, legislative frameworks for female genital cutting vary across states and territories, including the penalties for conducting it, and for removing a child for the purpose of conducting it outside Australia. This presentation provides an overview of the history, nature and consequences of the various forms of female genital cutting, and of the major Australian legal principles, ethical controversies, and medical, legal and social challenges in this field.

Advance Care Planning in palliative care : a systematic literature review of the contextual factors influencing its uptake 2008-2012

Background: Advance Care Planning is an iterative process of discussion, decision-making and documentation about end-of-life care. Advance Care Planning is highly relevant in palliative care due to intersecting clinical needs. To enhance the implementation of Advance Care Planning, the contextual factors influencing its uptake need to be better understood. Aim: To identify the contextual factors influencing the uptake of Advance Care Planning in palliative care as published between January 2008 and December 2012. Methods: Databases were systematically searched for studies about Advance Care Planning in palliative care published between January 2008 and December 2012. This yielded 27 eligible studies, which were appraised using National Institute of Health and Care Excellence Quality Appraisal Checklists. Iterative thematic synthesis was used to group results. Results: Factors associated with greater uptake included older age, a college degree, a diagnosis of cancer, greater functional impairment, being white, greater understanding of poor prognosis and receiving or working in specialist palliative care. Barriers included having non-malignant diagnoses, having dependent children, being African American, and uncertainty about Advance Care Planning and its legal status. Individuals’ previous illness experiences, preferences and attitudes also influenced their participation. Conclusion: Factors influencing the uptake of Advance Care Planning in palliative care are complex and multifaceted reflecting the diverse and often competing needs of patients, health professionals, legislature and health systems. Large population-based studies of palliative care patients are required to develop the sound theoretical and empirical foundation needed to improve uptake of Advance Care Planning in this setting.

Detecting approximate clones in business process model repositories

Empirical evidence shows that repositories of business process models used in industrial practice contain significant amounts of duplication. This duplication arises for example when the repository covers multiple variants of the same processes or due to copy-pasting. Previous work has addressed the problem of efficiently retrieving exact clones that can be refactored into shared subprocess models. This article studies the broader problem of approximate clone detection in process models. The article proposes techniques for detecting clusters of approximate clones based on two well-known clustering algorithms: DBSCAN and Hi- erarchical Agglomerative Clustering (HAC). The article also defines a measure of standardizability of an approximate clone cluster, meaning the potential benefit of replacing the approximate clones with a single standardized subprocess. Experiments show that both techniques, in conjunction with the proposed standardizability measure, accurately retrieve clusters of approximate clones that originate from copy-pasting followed by independent modifications to the copied fragments. Additional experiments show that both techniques produce clusters that match those produced by human subjects and that are perceived to be standardizable.

Occupational Health and Safety, Courts and Crime: the legal construction of occupational health and safety offences in Victoria

This book reports on an empirically-based study of the manner in which the Magistrates' Courts in Victoria, construct occupational health and safety (OHS) issues when hearing prosecutions for offences under the Victorian OHS legislation. Prosecution has always been a controversial element in the enforcement armoury of OHS regulators, but at the same time it has long been argued that the low level of fines imposed by courts has had an important chilling effect on the OHS inspectorate's enforcement approaches, and on the impact of OHS legislation. Using a range of empirical research methods, including three samples of OHS prosecutions carried out in the Victorian Magistrates' Courts, Professor Johnstone shows how courts, inspectors, prosecutors and defence counsel are involved in filtering or reshaping OHS issues during the prosecution process, both pre-trial and in court. He argues that OHS offences are constructed by focusing on "events", in most cases incidents resulting in injury or death. This "event-focus" ensures that the attention of the parties is drawn to the details of the incident, and away from the broader context of the event. During the court-based sentencing process defence counsel is able to adopt a range of techniques which isolate the incident from its micro and macro contexts, thereby individualising and decontextualising the incident.

Lawyers behaving badly in mediations : lessons for legal educators

This article will discuss some real life case examples of what will be termed “lawyers behaving badly” where it will be argued that legal representatives have not performed as effectively as they could have in mediation settings. These instances of “lawyer misbehaviour” will be grouped under several broad headings: the Process Thwarter, the Zealous Adversarial Advocate, the Misguided Advisor, the Distributive Bargainer, the Passive Advocate, and the Legal Takeover. Reflecting on these situations will provide guidance to legal educators as to the specific areas of dispute resolution knowledge and skills that future lawyers need to learn and develop.

Patterns of boardroom discussions around the accountability process in a nonprofit organisation

This chapter sets out to identify patterns at play in boardroom discussions around the design and adoption of an accountability system in a nonprofit organisation. To this end, it contributes to the scarce literature showing the backstage of management accounting systems (Berry, 2005), investment policy determining (Kreander, Beattie & McPhail, 2009; Kreander, McPhail & Molyneaux, 2004) and financial planning strategizing (Parker, 2004) or budgeting (Irvine 2005). The paucity of publications is due to issues raised by confidentiality preventing attendance at those meetings (Irvine, 2003), Irvine & Gaffikin, 2006). However, often, the implementation of a new control technology occurs over a long period of time that might exceed the duration of a research project (Quattrone & Hopper, 2001, 2005). Recent trends consisting of having research funded by grants from private institutions or charities have tended to reduce the length of such undertakings to a few months or rarely more than a couple of years (Parker, 2013);

Natural convection due to differential heating of inclined walls and heat source placed on bottom wall of an attic shaped space

Numerical investigation of free convection heat transfer in an attic shaped enclosure with differentially heated two inclined walls and filled with air is performed in this study. The left inclined surface is uniformly heated whereas the right inclined surface is uniformly cooled. There is a heat source placed on the right side of the bottom surface. Rest of the bottom surface is kept as adiabatic. Finite volume based commercial software ANSYS 15 (Fluent) is used to solve the governing equations. Dependency of various flow parameters of fluid flow and heat transfer is analyzed including Rayleigh number, Ra ranging from 103 to 106, heater size from 0.2 to 0.6, heater position from 0.3 to 0.7 and aspect ratio from 0.2 to 1.0 with a fixed Prandtl number of 0.72. Outcomes have been reported in terms of temperature and stream function contours and local Nusselt number for various Ra, heater size, heater position, and aspect ratio. Grid sensitivity analysis is performed and numerically obtained results have been compared with those results available in the literature and found good agreement.

Process engineering aspects of plasmid-based biopharmaceuticals production : tackling the threatening vaccine shortages to prevent global pandemics

Infectious diseases such as SARS, influenza and bird flu have the potential to cause global pandemics; a key intervention will be vaccination. Hence, it is imperative to have in place the capacity to create vaccines against new diseases in the shortest time possible. In 2004, The Institute of Medicine asserted that the world is tottering on the verge of a colossal influenza outbreak. The institute stated that, inadequate production system for influenza vaccines is a major obstruction in the preparation towards influenza outbreaks. Because of production issues, the vaccine industry is facing financial and technological bottlenecks: In October 2004, the FDA was caught off guard by the shortage of flu vaccine, caused by a contamination in a US-based plant (Chiron Corporation), one of the only two suppliers of US flu vaccine. Due to difficulties in production and long processing times, the bulk of the world's vaccine production comes from very small number of companies compared to the number of companies producing drugs. Conventional vaccines are made of attenuated or modified forms of viruses. Relatively high and continuous doses are administered when a non-viable vaccine is used and the overall protective immunity obtained is ephemeral. The safety concerns of viral vaccines have propelled interest in creating a viable replacement that would be more effective and safer to use.

Evidence-based business process management: Using digital opportunities to drive organizational innovation

Process improvement and innovation are risky endeavors, like swimming in unknown waters. In this chapter, I will discuss how process innovation through BPM can benefit from Research-as-a-Service, that is, from the application of research concepts in the processes of BPM projects. A further subject will be how innovations can be converted from confidence-based to evidence-based models due to affordances of digital infrastructures such as large-scale enterprise soft-ware or social media. I will introduce the relevant concepts, provide illustrations for digital capabilities that allow for innovation, and share a number of key takeaway lessons for how organizations can innovate on the basis of digital opportunities and principles of evidence-based BPM: the foundation of all process decisions in facts rather than fiction.

Prediction of shrinkage and porosity during drying: Considering both material properties and process conditions

Drying of food materials offers a significant increase in the shelf life of food materials, along with the modification of quality attributes due to simultaneous heat and mass transfer. Shrinkage and variations in porosity are the common micro and microstructural changes that take place during the drying of mostly the food materials. Although extensive research has been carried out on the prediction of shrinkage and porosity over the time of drying, no single model exists which consider both material properties and process condition in the same model. In this study, an attempt has been made to develop and validate shrinkage and porosity models of food materials during drying considering both process parameters and sample properties. The stored energy within the sample, elastic potential energy, glass transition temperature and physical properties of the sample such as initial porosity, particle density, bulk density and moisture content have been taken into consideration. Physical properties and validation have been made by using a universal testing machine ( Instron 2kN), a profilometer (Nanovea) and a pycnometer. Apart from these, COMSOL Multiphysics 4.4 has been used to solve heat and mass transfer physics. Results obtained from models of shrinkage and porosity is quite consistent with the experimental data. Successful implementation of these models would ensure the use of optimum energy in the course of drying and better quality retention of dried foods.

Advance care planning in stroke: Influence of time on engagement in the process

Purpose Individuals who experience stroke have a higher likelihood of subsequent stroke events, making it imperative to plan for future medical care. In the event of a further serious health event, engaging in the process of advanced care planning (ACP) can help family members and health care professionals (HCPs) make medical decisions for individuals who have lost the capacity to do so. Few studies have explored the views and experiences of patients with stroke about discussing their wishes and preferences for future medical events, and the extent to which stroke HCPs engage in conversations around planning for such events. In this study, we sought to understand how the process of ACP unfolded between HCPs and patients post-stroke. Patients and methods Using grounded theory (GT) methodology, we engaged in direct observation of HCP and patient interactions on an acute stroke unit and two stroke rehabilitation units. Using semi-structured interviews, 14 patients and four HCPs were interviewed directly about the ACP process. Results We found that open and continual ACP conversations were not taking place, patients experienced an apparent lack of urgency to engage in ACP, and HCPs were uncomfortable initiating ACP conversations due to the sensitive nature of the topic. Conclusion In this study, we identified lack of engagement in ACP post-stroke, attributable to patient and HCP factors. This encourages us to look further into the process of ACP in order to develop open communication between the patient with stroke, their families, and stroke HCPs.

Plain packaging for the Pacific Rim: The Trans-Pacific Partnership and tobacco control

Big Tobacco has been engaged in a dark, shadowy plot and conspiracy to hijack the Trans-Pacific Partnership Agreement (TPP) and undermine tobacco control measures – such as graphic health warnings and the plain packaging of tobacco products... In the context of this heavy lobbying by Big Tobacco and its proxies, this chapter provides an analysis of the debate over trade, tobacco, and the TPP. This discussion is necessarily focused on the negotiations of the free trade agreement – the shadowy conflicts before the finalisation of the text. This chapter contends that the trade negotiations threaten hard-won gains in public health – including international developments such as the WHO Framework Convention on Tobacco Control, and domestic measures, such as graphic health warnings and the plain packaging of tobacco products. It maintains that there is a need for regional trade agreements to respect the primacy of the WHO Framework Convention on Tobacco Control. There is a need both to provide for an open and transparent process regarding such trade negotiations, as well as a due and proper respect for public health in terms of substantive obligations. Part I focuses on the debate over the intellectual property chapter of the TPP, within the broader context of domestic litigation against Australia’s plain tobacco packaging regime and associated WTO disputes. Part II examines the investment chapter of the TPP, taking account of ongoing investment disputes concerning tobacco control and the declared approaches of Australia and New Zealand to investor-state dispute settlement. Part III looks at the discussion as to whether there should be specific text on tobacco control in the TPP, and, if so, what should be its nature and content. This chapter concludes that the plain packaging of tobacco products – and other best practices in tobacco control – should be adopted by members of the Pacific Rim.

Evaluating and predicting overall process risk using event logs

Companies standardise and automate their business processes in order to improve process eff ciency and minimise operational risks. However, it is di fficult to eliminate all process risks during the process design stage due to the fact that processes often run in complex and changeable environments and rely on human resources. Timely identification of process risks is crucial in order to insure the achievement of process goals. Business processes are often supported by information systems that record information about their executions in event logs. In this article we present an approach and a supporting tool for the evaluation of the overall process risk and for the prediction of process outcomes based on the analysis of information recorded in event logs. It can help managers evaluate the overall risk exposure of their business processes, track the evolution of overall process risk, identify changes and predict process outcomes based on the current value of overall process risk. The approach was implemented and validated using synthetic event logs and through a case study with a real event log.

On the growth process of Cu2ZnSn(S,Se)4 absorber layer formed by selenizing Cu–ZnS–SnS precursors and its photovoltaic performance

Sputtering and subsequent sulfurization(orselenization)is one of the methods that have been extensively employed to fabricate Cu2ZnSn(S,Se)4 (CZTSSe) thin films. However, there are limited reports on the effect of precursor stacking order of the sputtered source materials on the properties of the synthesized CZTSSe films. In this work,the morphology and crystallization process of the CZTSSe films which were prepared by selenizing Cu–ZnS–SnS precursor layers with different stacking sequences and the adhesion property between the as-synthesized CZTSSe layer and Mosubstrate have been thoroughly investigated. It has been found that the growth of CZTSSe material and the morphology of the film strongly depend on the location of Culayer in the precursor film. The formation of CZTSSe starts from the diffusion of Cu–Se to Sn(S,Se)layert o form Cu–Sn–(S,Se) compound,followed by the reaction with Zn(S,Se). The investigation of themorphology of the CZTSSe films has shown that large grains are formed in the film with the precursor stacking order of Mo/SnS/ZnS/Cu,which is attributed to a bottom-to-top growth mechanism. In contrast, the film made from a precursor with a stacking sequence of Mo/ZnS/ SnS/Cu is mainly consisted of small grains due to a top-to-bottom growth mechanism. The best CZTSSe solar cell with energy conversion efficiency of3.35%has been achieved with the selenized Mo/ZnS/ SnS/Cu film, which is attributed to a good contact between the absorber layer and the Mosubstrate.