Perception and reality : meeting Australia’s physical activity guidelines for 12-18 year olds

Governments regularly publish empirically derived minimum physical activity (PA) guidelines for youth, in response to the ongoing trend of youth physical inactivity. The purpose of this investigation was to explore parents’ awareness of the national PA guidelines for youth, and adolescents’ and their parents’ perceptions of adolescent PA, and compare these to self-reported adolescent PA. A total of 115 adolescents (aged 12-14) and their parents completed questionnaire assessments. Parents responded to questions concerning their awareness of the national PA guidelines, and whether they believed their child to be sufficiently active. Adolescents completed the International Physical Activity Questionnaire for Adolescents, and questions concerning their perceived level of PA. Adolescents were deemed sufficiently active if they participated in an average of at least 60 minutes of moderate-to-vigorous PA each day. Overall, 104 (90.4%) adolescents and their parents had complete data sets and were included in the analysis. Of the 45 (43.3%) sufficiently and 59 (56.7%) insufficiently active adolescents, 42 (93%) and 41 (69.5%) respectively believed that they were active enough for good general health. Additionally, 41 (91.1%) parents of active and 44 (74.6%) parents of inactive adolescents either agreed or strongly agreed that their child participates in sufficient PA for good general health. Twenty-four (53.3%) parents of active adolescents were unaware of the national PA guidelines, with 10 (22.2%) neither aware or unaware, and 11 (24.4%) aware. Similar results were found for the parents of inactive adolescents with 31 (52.5%) unaware, 17 (28.8%) neither aware or unaware, and 11 (18.6%) aware. These results suggest that the youth PA guidelines are being inadequately received by both adolescents, and their parents. Opportunities to effectively communicate these guidelines such as embedment in curriculum for adolescents, or the dissemination of materials for parents, should be maximised by appropriate authorities.

Sustainable and affordable housing : a myth or reality

The Australian government has released a draft National Building Framework that will likely tighten the building standard for new houses to meet higher sustainability requirements. There are uncertainties about the impact this could have on the cost of housing and the supply of affordable housing. This paper aims to provide evidence-based conclusions on the possibility of delivering sustainable and affordable housing for low income people. The case studies are gathered from Brisbane and Gold Coast. Case studies are analysed by unpacking the features that were included to meet sustainability and affordability goals for housing. This paper outlines the key factors for their success and also challenges for replication of the projects. The study shows that the key success drivers for delivering sustainable and affordable housing are providing planning incentives, subsidies for increased energy efficiency, supportive regulatory frameworks and appropriate allocation of infrastructure charges. It shows that government can prioritise their resources to support affordable and sustainable housing for low income people.

Integrated multi-professional teams in primary care : rhetoric or reality?

Integrated multi-professional teams are crucial to ongoing health system development and need to be responsive to the increasing demands of health care such as the burgeoning rate of chronic diseases. Integrated multi-professional teams also constitute a fundamental pillar of health service delivery in primary care worldwide. The aim of these teams is to deliver care beyond simple co-location of healthcare providers, through implementing integrated practice together, rather than as a group of independent disciplines. The challenges of developing and implementing integrated multi-professional teams in busy primary care clinical environments is addressed in this paper through a conceptual framework specifically designed for primary care and a case study analysis of examples of teamwork in Australian primary care.

Ultimate load behaviour of box-columns under combined loading of axial compression and torsion

This paper describes a study of the theoretical and experimental behaviour of box-columns of varying b/t ratios under loadings of axial compression and torsion and their combinations. Details of the testing rigs and the testing methods, the results obtained such as the load-deflection curves and the interaction diagrams, and experimental observations regarding the behaviour of box-models and the types of local plastic mechanisms associated with each type of loading are presented. A simplified rigid-plastic analysis is carried out to study the collapse behaviour of box-columns under these loadings, based on the observed plastic mechanisms, and the results are compared with those of experiments.

Ultimate flexural limit states analysis of prestressed concrete sleeper

Railway is one of the most important, reliable and widely used means of transportation, carrying freight, passengers, minerals, grains, etc. Thus, research on railway tracks is extremely important for the development of railway engineering and technologies. The safe operation of a railway track is based on the railway track structure that includes rails, fasteners, pads, sleepers, ballast, subballast and formation. Sleepers are very important components of the entire structure and may be made of timber, concrete, steel or synthetic materials. Concrete sleepers were first installed around the middle of last century and currently are installed in great numbers around the world. Consequently, the design of concrete sleepers has a direct impact on the safe operation of railways. The "permissible stress" method is currently most commonly used to design sleepers. However, the permissible stress principle does not consider the ultimate strength of materials, probabilities of actual loads, and the risks associated with failure, all of which could lead to the conclusion of cost-ineffectiveness and over design of current prestressed concrete sleepers. Recently the limit states design method, which appeared in the last century and has been already applied in the design of buildings, bridges, etc, is proposed as a better method for the design of prestressed concrete sleepers. The limit states design has significant advantages compared to the permissible stress design, such as the utilisation of the full strength of the member, and a rational analysis of the probabilities related to sleeper strength and applied loads. This research aims to apply the ultimate limit states design to the prestressed concrete sleeper, namely to obtain the load factors of both static and dynamic loads for the ultimate limit states design equations. However, the sleepers in rail tracks require different safety levels for different types of tracks, which mean the different types of tracks have different load factors of limit states design equations. Therefore, the core tasks of this research are to find the load factors of the static component and dynamic component of loads on track and the strength reduction factor of the sleeper bending strength for the ultimate limit states design equations for four main types of tracks, i.e., heavy haul, freight, medium speed passenger and high speed passenger tracks. To find those factors, the multiple samples of static loads, dynamic loads and their distributions are needed. In the four types of tracks, the heavy haul track has the measured data from Braeside Line (A heavy haul line in Central Queensland), and the distributions of both static and dynamic loads can be found from these data. The other three types of tracks have no measured data from sites and the experimental data are hardly available. In order to generate the data samples and obtain their distributions, the computer based simulations were employed and assumed the wheel-track impacts as induced by different sizes of wheel flats. A valid simulation package named DTrack was firstly employed to generate the dynamic loads for the freight and medium speed passenger tracks. However, DTrack is only valid for the tracks which carry low or medium speed vehicles. Therefore, a 3-D finite element (FE) model was then established for the wheel-track impact analysis of the high speed track. This FE model has been validated by comparing its simulation results with the DTrack simulation results, and with the results from traditional theoretical calculations based on the case of heavy haul track. Furthermore, the dynamic load data of the high speed track were obtained from the FE model and the distributions of both static and dynamic loads were extracted accordingly. All derived distributions of loads were fitted by appropriate functions. Through extrapolating those distributions, the important parameters of distributions for the static load induced sleeper bending moment and the extreme wheel-rail impact force induced sleeper dynamic bending moments and finally, the load factors, were obtained. Eventually, the load factors were obtained by the limit states design calibration based on reliability analyses with the derived distributions. After that, a sensitivity analysis was performed and the reliability of the achieved limit states design equations was confirmed. It has been found that the limit states design can be effectively applied to railway concrete sleepers. This research significantly contributes to railway engineering and the track safety area. It helps to decrease the failure and risks of track structure and accidents; better determines the load range for existing sleepers in track; better rates the strength of concrete sleepers to support bigger impact and loads on railway track; increases the reliability of the concrete sleepers and hugely saves investments on railway industries. Based on this research, many other bodies of research can be promoted in the future. Firstly, it has been found that the 3-D FE model is suitable for the study of track loadings and track structure vibrations. Secondly, the equations for serviceability and damageability limit states can be developed based on the concepts of limit states design equations of concrete sleepers obtained in this research, which are for the ultimate limit states.

Urban consolidation : reality or fantasy

Urban consolidation has been a policy objective of many local and state governments in Australia for the past decade. Densification of city centres and other identified activity centres is a sensible solution to a plethora of policy objectives including: growth management, housing affordability, housing choice and infrastructure utilisation etc whilst preserving the fabric of existing neighbourhoods. However despite the plethora of supportive policies and ripe redevelopment sites, urban sprawl continues to permeate city fringes and affordable urban densification in the post GFC environment slips into the “too hard” basket. This article discusses current issues facing the development industry, highlighting factors contributing to the disequilibrium between demand and supply in the medium to high density residential markets.

Raising awareness of Australian Aboriginal peoples reality : Embedding Aboriginal knowledge in social work education through the use of field experiences

Effective social work practice with Aboriginal peoples and communities requires knowledge of operational communication skills and practice methods. In addition, there is also a need for practitioners to be aware of the history surrounding white engagement with Aboriginal communities and their cultures. Indeed, the Australian Association of Social Workers (AASW) acknowledges the importance of social workers practising cultural safety. Engendering knowledge of cultural safety for social work students is the opportunity to listen and talk with Aboriginal people who have experienced the destructive impacts of colonisation and the subsequent disruption to family and community. This article discusses the use of field experiences within a Masters of Social Work (Qualifying) Program (MSW) as an educational method aimed at increasing student awareness of contemporary Aboriginal issues and how to practice effectively and within a culturally safe manner.

Paper-based mixed reality sketch augmentation as a conceptual design support tool

This undergraduate student paper explores usage of mixed reality techniques as support tools for conceptual design. A proof-of-concept was developed to illustrate this principle. Using this as an example, a small group of designers was interviewed to determine their views on the use of this technology. These interviews are the main contribution of this paper. Several interesting applications were determined, suggesting possible usage in a wide range of domains. Paper-based sketching, mixed reality and sketch augmentation techniques complement each other, and the combination results in a highly intuitive interface.

From true story to Morning Glory : fantasy and reality in journalism movies

Many movies have been made about journalists, including some of cinema’s all-time classics. Fewer have been made about the process of journalism, however, and fewer still have captured that process in a way which reflects the reality of a hyperactive, stressedout trade that at its best confronts power and risks everything to expose its abuse. Those deemed to come close to that gritty realism regularly feature in those polls of the films journalists themselves think are the best representations of their oft-maligned profession. These are the films in which journalists like to think they see themselves. They are part of the professional mythology of journalistic practice.

Developing health literacy through school based health education : can reality match rhetoric

Recently in Australia, the National Health and Hospitals Reform Commission (2009) and National Preventative Health Taskforce (2009) recommended that one way to strengthen consumer engagement within a health system is to ensure health literacy comprise a core element of the National Curriculum for primary and secondary schooling. However, whilst nationally and internationally schools are mandated to teach health education, there is considerable disjuncture between societies' broad expectations and schools' capacities to deliver programs that promote healthy Jiving (Marks, 2010; Basch, 2010). Given the centrality of literacy education in contemporary schooling (Snyder, 2008), 'health literacy' has been identified as a construct that offers the potential to close this perceived gap (McCuaig, Coore & Hay, 2012; Kickbusch, 2001). To date, there has been limited research asto what a health literacy focused, school based health education curriculum could look like.

Understanding expectations with multiple controllers in an augmented reality videogame

Player experiences and expectations are connected. The presumptions players have about how they control their gameplay interactions may shape the way they play and perceive videogames. A successfully engaging player experience might rest on the way controllers meet players' expectations. We studied player interaction with novel controllers on the Sony PlayStation Wonderbook, an augmented reality (AR) gaming system. Our goal was to understand player expectations regarding game controllers in AR game design. Based on this preliminary study, we propose several interaction guidelines for hybrid input from both augmented reality and physical game controllers

Love hurts: The costly reality of online romance fraud

Online dating and romance scams continue to lure in Australians with figures this week showing people have lost more than A$23 million this year alone, with average individual losses at A$21,000 – three times higher than other types of fraud. The Australian Competition and Consumer Commission (ACCC) set up the Scam Disruption Project in August to help target those it believes have been caught in such scams. Over three months it sent 1,500 letters to potential victims in New South Wales and the Australian Capital Territory. The figures released this week show that 50 people have been scammed, losing a total A$1.7 million – that’s an average of A$34,000 per victim. Almost three quarters of the scams were dating and romance related, which saw it evolve into the number one category of fraud victimisation. Romance scams continue to pose a problem – despite the efforts of the police and ACCC – so why is it that people continue to fall for them?

Improving access to housing for low-income communities in Dhaka: From rhetoric to reality in community participation

The research explores how community participation can address affordable housing problems of the poor in Dhaka. The research, based on extensive interviews, community focus groups and household surveys in different Dhaka slums, identifies the limiting factors to promote community participation in affordable housing creation. In Dhaka housing options for poor are currently limited to affordable shelters in informal settlements. Public housing programs have failed to reach the poor and meet affordability levels due to a number of factors including lack of beneficiary participation. Beneficiary participation, though widely recognized for success in housing initiatives, often deteriorates in process of implementation into mere involvement, not reflecting community needs and aspirations and thus failing to meet its core objectives. This research identified the most significant impediments as well as opportunities to advance participation in their own housing provisions in Dhaka city.

Communication and essentialism: Grounding the shared reality of a social category

Essentialism is an ontological belief that there exists an underlying essence to a category. This article advances and tests in three studies the hypothesis that communication about a social category, and expected or actual mutual validation, promotes essentialism about a social category. In Study 1, people who wrote communications about a social category to their ingroup audiences essentialized it more strongly than those who simply memorized about it. In Study 2, communicators whose messages about a novel social category were more elaborately discussed with a confederate showed a stronger tendency to essentialize it. In Study 3, communicators who elaborately talked about a social category with a naive conversant also essentialized the social category. A meta-analysis of the results supported the hypothesis that communication promotes essentialism. Although essentialism has been discussed primarily in perceptual and cognitive domains, the role of social processes as its antecedent deserves greater attention.