Effects of acute multi-nutrient supplementation on rugby union match performance and recovery

Aim: To determine the effects of an acute multi-nutrient supplement on physiological, performance and recovery responses to intermittent-sprint running and muscular damage during rugby union matches. Methods: Using a randomised, double-blind, cross-over design, twelve male rugby union players ingested either 75 g of a comprehensive multi-nutrient supplement (SUPP), [Musashi] or 1 g of a taste and carbohydrate matched placebo (PL) for 5 days pre-competition. Competitive rugby union game running performance was then measured using 1 Hz GPS data (SPI10, SPI elite, GPSports), in addition to associated blood draws, vertical jump assessments and ratings of perceived muscular soreness (MS) pre, immediately post and 24 h post-competition. Baseline (BL) GPS data was collected during six competition rounds preceding data collection. Results: No significant differences were observed between supplement conditions for all game running, vertical jump, and ratings of perceived muscular soreness. However, effect size analysis indicated SUPP ingestion increased 1st half very high intensity running (VHIR) mean speed (d = 0.93) and 2nd half relative distance (m/min) (d = 0.97). Further, moderate increases in 2nd half VHIR distance (d = 0.73), VHIR m/min (d = 0.70) and VHIR mean speed (d = 0.56) in SUPP condition were also apparent. Moreover, SUPP demonstrated significant increases in 2nd half dist m/min, total game dist m/min and total game HIR m/min compared with BL data (P < 0.05). Further, large ES increases in VHIR time (d = 0.88) and moderate increases in 2nd half HIR m/min (d = 0.65) and 2nd half VHIR m/min (d = 0.74) were observed between SUPP and BL. Post-game aspartate aminotransferase (AST) (d = 1.16) and creatine kinase (CK) (d = 0.97) measures demonstrated increased ES values with SUPP, while AST and CK values correlated with 2nd half VHIR distance (r = −0.71 and r = −0.76 respectively). Elevated c-reactive protein (CRP) was observed post-game in both conditions, however was significantly blunted with SUPP (P = 0.05). Additionally, pre-game (d = 0.98) and post-game (d = 0.96) increases in cortisol (CORT) were apparent with SUPP. No differences were apparent between conditions for pH, lactate, glucose, HCO3, vertical jump assessments and MS (P > 0.05). Conclusion: These findings suggest SUPP may assist in the maintenance of VHIR speeds and distances covered during rugby union games, possibly via the buffering qualities of SUPP ingredients (i.e. caffeine, creatine, bicarbonate). While the mechanisms for these findings are unclear, the similar pH between conditions despite additional VHIR during SUPP may support this conclusion. Finally, correlations between increased work completed at very high intensities and muscular degradation in SUPP conditions, may mask any anti-catabolic properties of supplementation.

Planning for transit system reliability using productive performance and risk assessment

Urban transit system performance may be quantified and assessed using transit capacity and productive capacity for planning, design and operational management. Bunker (4) defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures transit task performed over distance. Transit productiveness (p-km/h) captures transit work performed over time. This paper applies productive performance with risk assessment to quantify transit system reliability. Theory is developed to monetize transit segment reliability risk on the basis of demonstration Annual Reliability Event rates by transit facility type, segment productiveness, and unit-event severity. A comparative example of peak hour performance of a transit sub-system containing bus-on-street, busway, and rail components in Brisbane, Australia demonstrates through practical application the importance of valuing reliability. Comparison reveals the highest risk segments to be long, highly productive on street bus segments followed by busway (BRT) segments and then rail segments. A transit reliability risk reduction treatment example demonstrates that benefits can be significant and should be incorporated into project evaluation in addition to those of regular travel time savings, reduced emissions and safety improvements. Reliability can be used to identify high risk components of the transit system and draw comparisons between modes both in planning and operations settings, and value improvement scenarios in a project evaluation setting. The methodology can also be applied to inform daily transit system operational management.

Planning for transit system reliability using productive performance and risk assessment

Urban transit system performance may be quantified and assessed using transit capacity and productive capacity for planning, design and operational management. Bunker (4) defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures transit task performed over distance. Transit productiveness (p-km/h) captures transit work performed over time. This paper applies productive performance with risk assessment to quantify transit system reliability. Theory is developed to monetize transit segment reliability risk on the basis of demonstration Annual Reliability Event rates by transit facility type, segment productiveness, and unit-event severity. A comparative example of peak hour performance of a transit sub-system containing bus-on-street, busway, and rail components in Brisbane, Australia demonstrates through practical application the importance of valuing reliability. Comparison reveals the highest risk segments to be long, highly productive on street bus segments followed by busway (BRT) segments and then rail segments. A transit reliability risk reduction treatment example demonstrates that benefits can be significant and should be incorporated into project evaluation in addition to those of regular travel time savings, reduced emissions and safety improvements. Reliability can be used to identify high risk components of the transit system and draw comparisons between modes both in planning and operations settings, and value improvement scenarios in a project evaluation setting. The methodology can also be applied to inform daily transit system operational management.

Assessing performance and capability in the work place : focusing on essential skills and knowledge in student work placements

The determination of performance standards and assessment practices in regard to student work placements is an essential and important task. Inappropriate, inadequate, or excessively complex assessment tasks can influence levels of student engagement and the quality of learning outcomes. Critical to determining appropriate standards and assessment tasks is an understanding and knowledge of key elements of the learning environment and the extent to which opportunities are provided for students to engage in critical reflection and judgement of their own performance in the contexts of the work environment. This paper focuses on the development of essential skills and knowledge (capabilities) that provide evidence of learning in work placements by describing an approach taken in the science and technology disciplines. Assessment matrices are presented to illustrate a method of assessment for use within the context of the learning environment centred on work placements in science and technology. This study contributes to the debate on the meaning of professional capability, performance standards and assessment practices in work placement programs by providing evidence of an approach that can be adapted by other programs to achieve similar benefits. The approach may also be valuable to other learning contexts where capability and performance are being judged in situations that are outside a controlled teaching and learning environment i.e. in other life-wide learning contexts.

Academic wage structure by gender : the roles of peer review, performance, and market forces

We focus on understanding the role of productivity in determining wage structure differences between men and women in academia. The data arise from a pay-equity study carried out in a single Midwestern U.S. university over the 1996–7 academic year. Econometric results confirm that external market forces exert influence over both male and female salary. But peer review ratings play a significant role in male but not female earnings determination, with similar results for objective measures of research, teaching and service.

Assessing performance and capability in work placements

As universities worldwide begin to appreciate the value of authentic learning experiences, so they struggle with methods of assessing the outcomes from such experiences. This chapter describes the application of an assessment matrix developed by Queensland University of Technology (QUT) in Australia, to the assessment requirements and practices relating to work integrated learning at the University of Surrey in the UK. Despite the very different institutional contexts and independent way in which the assessment regimes have developed, it was found that the values and outcomes being assessed and the methods used to assess them were similar. The most important feature of assessing work integrated learning experiences is fitness for purpose; hence the learning objectives and assessment of outcomes for a WIL experience must be explicitly aligned to this objective.

Effect of recovery modality on 4-hour repeated treadmill running performance and changes in physiological variables

The purpose of this study was to compare the effectiveness of three different recovery modalities - active (ACT), passive (PAS) and contrast temperature water immersion (CTW) - on the performance of repeated treadmill running, lactate concentration and pH. Fourteen males performed two pairs of treadmill runs to exhaustion at 120% and 90% of peak running speed (PRS) over a 4-hour period. ACT, PAS or CTW was performed for 15-min after the first pair of treadmill runs. ACT consisted of running at 40% PRS, PAS consisted of standing stationary and CTW consisted of alternating between 60-s cold (10°C) and 120-s hot (42°C) water immersion. Run times were converted to time to cover set distance using critical power. Type of recovery modality did not have a significant effect on change in time to cover 400 m (Mean±SD; ACT 2.7±3.6 s, PAS 2.9±4.2 s, CTW 4.2±6.9 s), 1000 m (ACT 2.2±4.0 s, PAS 4.8±8.6 s, CTW 2.1±7.2 s) or 5000 m (ACT 1.4±29.0 s, PAS 16.7±58.5 s, CTW 11.7±33.0 s). Post exercise blood lactate concentration was lower in ACT and CTW compared with PAS. Participants reported an increased perception of recovery in the CTW compared with ACT and PAS. Blood pH was not significantly influenced by recovery modality. Data suggest both ACT and CTW reduce lactate accumulation after high intensity running, but high intensity treadmill running performance is returned to baseline 4-hours after the initial exercise bout regardless of the recovery strategy employed.

Community night patrols in the Northern Territory : toward an improved performance and reporting framework

This Technical and Background Paper summarises the results of a Australian Government Attorney-General’s Department’s funded project. The project aimed to clarify the contribution of the community night patrol program in the Northern Territory (NT) to improving the community safety of Indigenous communities. The paper recommends an improved framework for monitoring performance and reporting. Community night patrols or similar services operate in many other areas of Australia and internationally. The paper concludes that the core business of community night patrols is (non-crisis) crime prevention not defacto policing. It also concludes that an unrecognised outcome of patrols is capturing and sharing local knowledge about community safety issues and solutions. Over time, community night patrols should focus on working with other services to reduce the need for repeat assistance to persons at risk and for risky incidents. The recently released Northern Territory Emergency Response Evaluation Report (2011) confirmed that communities and service providers surveyed largely support night patrols, but better data is required to more comprehensively assess their performance.

Weibo, framing, and media practices in China

This study uses frames analysis to investigate online discourses and processes of political deliberation on China’s weibo (microblog) service. It offers a comparative analysis of competing discourses surrounding the case of Wang Yue, a toddler who was ran over by two motor vehicles in Foshan, following which eighteen people passed by and ignored her plight. The study aims to understand how weibo facilitate its users to express their differences and deliberate disagreements with each other. The study found that Internet users are rational in the sense that they do not simply lean towards a dichotomised choice of ‘pro-’ or ‘anti-’ official discourse, but they are able to negotiate their moral choices by considering a wide range of social and political factors in such an emotional and morally controversial incident.

On Presence, Collective Performance and Assumptions of Causality

The ways we assume, observe and model “presence” and its effects are the focus in this paper. Entities with selectively shared presences are the basis of any collective, and of attributions (such as “humorous”, “efficient” or “intelligent”). The subtleties of any joint presence can markedly influence potentials, perceptions and performance of the collective as demonstrated when a humorous tale is counterpoised with disciplined thought. Disciplines build on presences assumed known or knowable while fluid and interpretable presences pervade humor. Explorations in this paper allow considerations of collectives, causality and the philosophy of computing. Economics has long considered issues of collective action in ways circumscribed by assumptions about the presence of economic entities. Such entities are deemed rational but they are clearly not intelligent. To reach its potential, collective intelligence research needs more adequate considerations of alternate presences and their impacts.

Next generation filmmaking and media arts in the Australian curriculum

Media education has been included as a mandatory component of the Arts within the new Australian national curriculum, which purports to set out a framework that encompasses core knowledge, understanding and skills critical to twenty-first century learning. This will position Australia as the only country to require media education as a compulsory aspect of Arts education and one of the first to implement a sequenced national media education curriculum from pre-school to year 12. A broad framework has been outlined for what the Media Arts curriculum will encompass and in this article we investigate the extent to which this framework is likely to provide media educators the opportunity to broaden the scope of established media education to effectively educate students about the ever-changing nature of media ecologies. The article outlines significant shifts occurring in the film and television industries to identify the types of knowledge students may need to understand these changes. This is followed by an analysis of existing state-based media curricula offered at years 11 and 12 in Australia to demonstrate that the concepts of institutions and audiences are not currently approached in ways that reflect contemporary media ecologies.

The role of the ethnic enclave in facilitating immigrant business performance and social integration

Chinese immigrant entrepreneurs, known the world over for their successful business practices (Kee, 1994), tend to start businesses within their ethnic enclave. But in a move away from multiculturalism, host countries increasingly fear that immigration and asylum pose a threat to social integration resulting in a lack of social cohesion and a plethora of government programs (Cheong, Edwards, Goulbourne & Solomos, 2007). For many immigrant entrepreneurs, the EE is an integral part of their social and cultural context and the location where ethnic resources reside (Logan, Alba & Stults, 2003). Immigrant entrepreneurs can harness the networks for labor and customers through various ties in their EE (Portes and Zhou, 1996). Yang, Ho and Chang (2010) illustrate in their paper that the Chinese immigrant entrepreneurs (IE) were able to utilize ethnic network resources as their social capital in order to reduce transaction costs and thus enhance business performance. Tilly (1990) explains that immigrants’ reliance on such networks for business or other information minimizes the socioeconomic hardships they would experience in host countries (Raijman & Tienda, 2000). Acquiring jobs in ethnic businesses and establishing businesses within an EE may facilitate migrants’ social integration into the host country (Tian & Shan, 1999). Although an EE has distinct economic advantages for immigrant entrepreneurs, Sequeira and Rasheed (2006: 367) argue that ‘Exclusive reliance on strong ties within the immigrant enclave has a negative effect on growth outside the enclave community.’ Similarly, Drori, Honig and Ginsberg (2010: 20) also propose that ‘The greater the reliance of transnational entrepreneurs on ethnic (versus societal) embedded resources and network structure, the narrower their possibilities of expanding the scope of their business.’ This research asks, ‘What is the role of the ethnic enclave in facilitating immigrant business growth and social integration? This project has the following important aims: A1 To better understand the role of IE, in particular Chinese IE in the Australian economy A2 To investigate the role of the EE in facilitating or inhibiting immigrant business performance A3 To understand how locating their firm inside or outside of the EE will affect the IE’s embeddedness in co-ethnic and nonco-ethnic networks and social integration A4 To understand how an IE’s social network affects business performance and social integration

Mobile phones and media use in Madang province of Papua New Guinea

A mobile phone service was not available to the majority of the population in Papua New Guinea (PNG) until mid-2007. Since that time, commercial competition has been introduced into the mobile telecommunication sector and coverage has spread across many parts of the country. While the focus of this article is on mobile phones, the research has also explored media access and media usage more generally. Analysis in this article adopts the 'circuit of culture' model developed by du Gay et al. (1997). The article is based on data from a survey conducted in 2009 in eight rural villages in Madang Province. The research occurred during the primary stages of mobile phone adoption in these places, providing a rare opportunity to gauge early adoption behaviour and attitudes.

Performance and gaseous and particle emissions from a liquefied petroleum gas (LPG) fumigated compression ignition engine

In this study, an LPG fumigation system was fitted to a Euro III compression ignition (CI) engine to explore its impact on performance, and gaseous and particulate emissions. LPG was introduced to the intake air stream (as a secondary fuel) by using a low pressure fuel injector situated upstream of the turbocharger. LPG substitutions were test mode dependent, but varied in the range of 14-29% by energy. The engine was tested over a 5 point test cycle using ultra low sulphur diesel (ULSD), and a low and high LPG substitution at each test mode. The results show that LPG fumigation coerces the combustion into pre-mixed mode, as increases in the peak combustion pressure (and the rate of pressure rise) were observed in most tests. The emissions results show decreases in nitric oxide (NO) and particulate matter (PM2.5) emissions; however, very significant increases in carbon monoxide (CO) and hydrocarbon (HC) emissions were observed. A more detailed investigation of the particulate emissions showed that the number of particles emitted was reduced with LPG fumigation at all test settings – apart from mode 6 of the ECE R49 test cycle. Furthermore, the particles emitted generally had a slightly larger median diameter with LPG fumigation, and had a smaller semi-volatile fraction relative to ULSD. Overall, the results show that with some modifications, LPG fumigation systems could be used to extend ULSD supplies without adversely impacting on engine performance and emissions.

Fire performance and design of load bearing light gauge steel frame wall systems exposed to realistic design fires

This paper presents the fire performance results of light gauge steel frame (LSF) walls lined with single and double plasterboards, and externally insulated with rock fibre insulation as obtained using a finite element analysis based parametric study. A validated numerical model was used to study the influence of various fire curves developed for a range of compartment characteristics. Data from the parametric study was utilized to develop a simplified method to predict the fire resistance ratings of LSF walls exposed to realistic design fire curves. Further, this paper also presents the details of suitable fire design rules based on current cold-formed steel standards and the modifications proposed by previous researchers. Of these the recently developed design rules by Gunalan and Mahendran [1] were investigated to determine their applicability to predict the axial compression strengths and fire resistance ratings (FRR) of LSF walls exposed to realistic design fires. Finally, the stud failure times obtained from fire design rules and finite element studies were compared for LSF walls lined with single and double plasterboards, and externally insulated with rock fibres under realistic design fire curves.