ePortfolio use by university students in Australia: A review of the Australian ePortfolio Project

In October 2008, the Australian Learning and Teaching Council (ALTC) released the final report for the commissioned project ePortfolio use by university students in Australia: Informing excellence in policy and practice. The Australian ePortfolio Project represented the first attempt to examine the breadth and depth of ePortfolio practice in the Australian higher education sector. The research activities included surveys of stakeholder groups in learning and teaching, academic management and human resource management, with respondents representing all Australian universities; a series of focus groups and semi-structured interviews which sought to explore key issues in greater depth; and surveys designed to capture students’ pre-course expectations and their post-course experiences of ePortfolio learning. Further qualitative data was collected through interviews with ‘mature users’ of ePortfolios. Project findings revealed that, while there was a high level of interest in the use of ePortfolios in terms of the potential to help students become reflective learners who were conscious of their personal and professional strengths and weaknesses, the state of play in Australian universities was very fragmented. The project investigation identified four individual, yet interrelated, contexts where strategies may be employed to support and foster effective ePortfolio practice in higher education: government policy, technical standards, academic policy, and learning and teaching. Four scenarios for the future were also presented with the goal of stimulating discussion about opportunities for stakeholder engagement. It is argued that the effective use of ePortfolios requires open dialogue and collaboration between the different stakeholders across this range of contexts.

Addressing issues in sparseness, ecological bias and formulation of the adjacency matrix in Bayesian spatio-temporal analysis of disease counts

The main objective of this PhD was to further develop Bayesian spatio-temporal models (specifically the Conditional Autoregressive (CAR) class of models), for the analysis of sparse disease outcomes such as birth defects. The motivation for the thesis arose from problems encountered when analyzing a large birth defect registry in New South Wales. The specific components and related research objectives of the thesis were developed from gaps in the literature on current formulations of the CAR model, and health service planning requirements. Data from a large probabilistically-linked database from 1990 to 2004, consisting of fields from two separate registries: the Birth Defect Registry (BDR) and Midwives Data Collection (MDC) were used in the analyses in this thesis. The main objective was split into smaller goals. The first goal was to determine how the specification of the neighbourhood weight matrix will affect the smoothing properties of the CAR model, and this is the focus of chapter 6. Secondly, I hoped to evaluate the usefulness of incorporating a zero-inflated Poisson (ZIP) component as well as a shared-component model in terms of modeling a sparse outcome, and this is carried out in chapter 7. The third goal was to identify optimal sampling and sample size schemes designed to select individual level data for a hybrid ecological spatial model, and this is done in chapter 8. Finally, I wanted to put together the earlier improvements to the CAR model, and along with demographic projections, provide forecasts for birth defects at the SLA level. Chapter 9 describes how this is done. For the first objective, I examined a series of neighbourhood weight matrices, and showed how smoothing the relative risk estimates according to similarity by an important covariate (i.e. maternal age) helped improve the model’s ability to recover the underlying risk, as compared to the traditional adjacency (specifically the Queen) method of applying weights. Next, to address the sparseness and excess zeros commonly encountered in the analysis of rare outcomes such as birth defects, I compared a few models, including an extension of the usual Poisson model to encompass excess zeros in the data. This was achieved via a mixture model, which also encompassed the shared component model to improve on the estimation of sparse counts through borrowing strength across a shared component (e.g. latent risk factor/s) with the referent outcome (caesarean section was used in this example). Using the Deviance Information Criteria (DIC), I showed how the proposed model performed better than the usual models, but only when both outcomes shared a strong spatial correlation. The next objective involved identifying the optimal sampling and sample size strategy for incorporating individual-level data with areal covariates in a hybrid study design. I performed extensive simulation studies, evaluating thirteen different sampling schemes along with variations in sample size. This was done in the context of an ecological regression model that incorporated spatial correlation in the outcomes, as well as accommodating both individual and areal measures of covariates. Using the Average Mean Squared Error (AMSE), I showed how a simple random sample of 20% of the SLAs, followed by selecting all cases in the SLAs chosen, along with an equal number of controls, provided the lowest AMSE. The final objective involved combining the improved spatio-temporal CAR model with population (i.e. women) forecasts, to provide 30-year annual estimates of birth defects at the Statistical Local Area (SLA) level in New South Wales, Australia. The projections were illustrated using sixteen different SLAs, representing the various areal measures of socio-economic status and remoteness. A sensitivity analysis of the assumptions used in the projection was also undertaken. By the end of the thesis, I will show how challenges in the spatial analysis of rare diseases such as birth defects can be addressed, by specifically formulating the neighbourhood weight matrix to smooth according to a key covariate (i.e. maternal age), incorporating a ZIP component to model excess zeros in outcomes and borrowing strength from a referent outcome (i.e. caesarean counts). An efficient strategy to sample individual-level data and sample size considerations for rare disease will also be presented. Finally, projections in birth defect categories at the SLA level will be made.

ePortfolio use by university students in Australia: Informing excellence in policy and practice

In mid 2007, the Australian Learning and Teaching Council (ALTC), formerly the Carrick Institute for Learning and Teaching in Higher Education, commissioned an intensive research project to examine the use of ePortfolios by university students in Australia. The project was awarded to a consortium of four universities: Queensland University of Technology as lead institution, The University of Melbourne, University of New England and University of Wollongong.---------- The overarching aim of the research project, which was given the working title of the Australian ePortfolio Project, was to examine the current levels of ePortfolio practice in Australian higher education. The principal project goals sought to provide an overview and analysis of the national and international ePortfolio contexts, document the types of ePortfolios used in Australian higher education, examine the relationship with the National Diploma Supplement project funded by the Federal government, identify any significant issues relating to ePortfolio implementation, and offer guidance about future opportunities for ePortfolio development. The research findings revealed that there was a high level of interest in the use of ePortfolios in the context of higher education, particularly in terms of the potential to help students become reflective learners who are conscious of their personal and professional strengths and weaknesses, as well as to make their existing and developing skills more explicit. There were some good examples of early adoption in different institutions, although this tended to be distributed across the sector. The greatest use of ePortfolios was recorded in coursework programs, rather than in research programs, with implementation generally reflecting subject-specific or program-based activity, as opposed to faculty- or university-wide activity. Accordingly, responsibility for implementation frequently rested with the individual teaching unit, although an alternative centralised model of coordination by ICT services, careers and employment or teaching and learning support was beginning to emerge. The project report concludes with a series of recommendations to guide the process, drawing on the need for open dialogue and effective collaboration between the stakeholders across the range of contexts: government policy, international technical standards, academic policy, and learning and teaching research and practice.

ePortfolio use by university students in Australia : Developing a sustainable community of practice

This report documents Stage Two of the Australian ePortfolio Project (AeP2), to specifically explore the current scope of national and international ePortfolio communities of practice in order to identify the factors that have contributed to their success and sustainability. The study has built on Stage One of the Australian ePortfolio Project (Hallam, Harper, McCowan, Hauville, McAllister, & Creagh, 2008), which outlined the broad range of issues and challenges, as well as significant opportunities, that faced the higher education sector in terms of ePortfolio practice, to determine how the emergent community of ePortfolio researchers and practitioners in Australia might be advanced. ---------- The overarching aims of this project were to focus on building the Australian community of practice through an online forum and further symposium activities. Through the research activities the project sought to generate the following major outcomes: develop a forum within the ALTC Exchange to support an ePortfolio community of practice; develop strategies to encourage interest in and engagement with community of practice activities; develop and promote resources to support the diverse stakeholders in ePortfolio practice; collaborate in the establishment of a cross-sector ePortfolio community of practice; host a second Australian ePortfolio Symposium (AeP2) to disseminate the findings from the Australian ePortfolio Project, to explore innovative practice in ePortfolio use in higher education, to articulate policy developments, and to stimulate discussion on international ePortfolio issues; host an associated trade display as a forum for strengthening the higher education sector’s understanding of the features and functionality of ePortfolio platforms; develop resources to support an ePortfolio symposium model that may be adopted for future events. ----------- The project activities encompassed a survey of stakeholders, a program of semi-structured interviews with community managers and a series of case studies depicting successful ePortfolio communities. The survey of ePortfolio practitioners sought to determine the potential value of an ePortfolio CoP, the preferred focus for and the desired features of such a community, as well as the options for the technical and social architecture of an online forum. Through the semi-structured interviews it was possible to examine current examples of CoP activity, to identify the critical success factors and the challenges faced by individual ePortfolio CoPs, so that the attributes of good practice could be presented. The data collected in the interviews contributed to the development of 14 case studies, which have been beneficial in illustrating the diverse nature of CoPs in Australia and overseas.----------- The report presents a rich picture of national and international ePortfolio communities of practice, with an examination of the factors that have contributed to their success and sustainability.

Up the e-learning curve : ensuring quality online education within an Australian university

The paper describes the implementation of a project within Australian Catholic University designed to launch the Faculties into online education in a manner which ensured quality in all aspects of the teaching-learning experiences of academics and students. Key elements of the strategic approach adopted by the project leaders, including the involvement of a specialist commercial provider of web-based delivery systems as a partner in the project, mechanisms to support the initiative through the first stages, careful choice of the programs offered online, and staff development matched to the emerging needs of those involved in the teaching of courses, are described. Challenges encountered in the implementation process, and the factors which assisted in overcoming these problems are identified. The paper draws upon this experience to raise some important issues relevant to the successful introduction of online education as an integral component of the teaching repertoire of Faculties.

Students’ perceptions, experiences and beliefs about Facebook in subjects at an Australian university

This paper reports on students’ perceptions, experiences and beliefs about the voluntary use of Facebook in Advertising, Law, Nursing and Creative Industries’ subjects at an Australian University. The researchers conducted in-depth interviews with students and the transcriptions were analysed using the constant comparison method. This resulted in a number of emergent themes, of which six are explored in this paper. The findings suggest that students are quite divergent in their responses to academics using Facebook in their subjects. They do not always see its relevance to the subject and are somewhat ambivalent about how it facilitates peer-to-peer relationships or a better relationship with the lecturer. The study also identifies themes relating to cynicism and intrusion into social spaces.

Coordinated research support services at Queensland University of Technology, Australia

Queensland University of Technology (QUT) is a large multidisciplinary university located in Brisbane, Queensland, Australia. QUT is increasing its research focus and is developing its research support services. It has adopted a model of collaboration between the Library, High Performance Computing and Research Support (HPC) and more broadly with Information Technology Services (ITS). Research support services provided by the Library include the provision of information resources and discovery services, bibliographic management software, assistance with publishing (publishing strategies, identifying high impact journals, dealing with publishers and the peer review process), citation analysis and calculating authors’ H Index. Research data management services are being developed by the Library and HPC working in collaboration. The HPC group within ITS supports research computing infrastructure, research development and engagement activities, researcher consultation, high speed computation and data storage systems , 2D/ 3D (immersive) visualisation tools, parallelisation and optimization of research codes, statistics/ data modeling training and support (both qualitative and quantitative) and support for the university’s central Access Grid collaboration facility. Development and engagement activities include participation in research grants and papers, student supervision and internships and the sponsorship, incubation and adoption of new computing technologies for research. ITS also provides other services that support research including ICT training, research infrastructure (networking, data storage, federated access and authorization, virtualization) and corporate systems for research administration. Seminars and workshops are offered to increase awareness and uptake of new and existing services. A series of online surveys on eResearch practices and skills and a number of focus groups was conducted to better inform the development of research support services. Progress towards the provision of research support is described within the context organizational frameworks; resourcing; infrastructure; integration; collaboration; change management; engagement; awareness and skills; new services; and leadership. Challenges to be addressed include the need to redeploy existing operational resources toward new research support services, supporting a rapidly growing research profile across the university, the growing need for the use and support of IT in research programs, finding capacity to address the diverse research support needs across the disciplines, operationalising new research support services following their implementation in project mode, embedding new specialist staff roles, cross-skilling Liaison Librarians, and ensuring continued collaboration between stakeholders.

Academic rigour in science assessment tasks

The critical problem of student disengagement and underachievement in the middle years of schooling (Years 4 . 9) has focussed attention on the quality of educational programs in schools, in Australia and elsewhere. The loss of enthusiasm for science in the middle years is particularly problematic given the growing demand for science professionals. Reshaping middle years programs has included an emphasis on integrating Information and Communication Technologies (ICTs) and improving assessment practices to engage students in higher cognitive processes and enhance academic rigour. Understanding the nature of academic rigour and how to embed it in students. science assessment tasks that incorporate the use of ICTs could enable teachers to optimise the quality of the learning environment. However, academic rigour is not clearly described or defined in the literature and there is little empirical evidence upon which researchers and teachers could draw to enhance understandings. This study used a collective case study design to explore teachers' understandings of academic rigour within science assessment tasks. The research design is based on a conceptual framework that is underpinned by socio-cultural theory. Three methods were used to collect data from six middle years teachers and their students. These methods were a survey, focus group discussion with teachers and a group of students and individual semi-structured interviews with teachers. Findings of the case study revealed six criteria of academic rigour, namely, higher order thinking, alignment, building on prior knowledge, scaffolding, knowledge construction and creativity. Results showed that the middle years teachers held rich understandings of academic rigour that led to effective utilisation of ICTs in science assessment tasks. Findings also indicated that teachers could further enhance their understandings of academic rigour in some aspects of each of the criteria. In particular, this study found that academic rigour could have been further optimised by: promoting more thoughtful discourse and interaction to foster higher order thinking; increasing alignment between curriculum, pedagogy, and assessment, and students. prior knowledge; placing greater emphasis on identifying, activating and building on prior knowledge; better differentiating the level of scaffolding provided and applying it more judiciously; fostering creativity throughout tasks; enhancing teachers‟ content knowledge and pedagogical content knowledge, and providing more in-depth coverage of fewer topics to support knowledge construction. Key contributions of this study are a definition and a model which clarify the nature of academic rigour.

Life in the 'real world': a profile of Queensland University of Technology Library and Information Science graduates.

A graduate destination survey can provide a snap shot in time of a graduate’s career progression and outcome. This paper will present the results of a Queensland University of Technology study exploring the employment outcomes of students who had completed a library and information science course from the Faculty of Information Technology between 2000 and 2008. Seventy-four graduates completed an online questionnaire administered in July 2009. The study found that 90% of the graduates surveyed were working and living in Queensland, with over three quarters living and working in Brisbane. Nearly 70% were working full-time, while only 1.4% indicating that they were unemployed and looking for work. Over 80% of the graduates identified themselves as working in “librarianship”. This study is the first step in understanding the progression and destination of QUT’s library and information science graduates. It is recommended that this survey becomes an ongoing initiative so that the results can be analysed and compared over time.

Performance space to performance place

The focus of this paper questions how the performance place was transformed to a performance space. This major change in distinction holds an ongoing significance to the development of the actors, scenographers, animators, writers and film directors craft within current digitally mediated and interactive performance environments. As part of this discussion this paper traces the crucial seed of the revolution that transformed modern scenographic practice from the droll of the romantic realism of the Victorian stage to the open potential of the performance environment of today. This is achieved through close readings on the practical work of Edward Gordon Craig and Adolphe Appia as well as the scenographic discussions of Chris Baugh.