Evaluation of intra- and extra-epithelial secretory IgA in chlamydial infections

IgA is an important mucosal antibody that can neutralize mucosal pathogens by either preventing attachment to epithelia (immune exclusion) or alternatively inhibit intraepithelial replication following transcytosis by the polymeric immunoglobulin receptor (pIgR). Chlamydia trachomatis is a major human pathogen that initially targets the endocervical or urethral epithelium in women and men, respectively. As both tissues contain abundant SIgA we assessed the protection afforded by IgA targeting different chlamydial antigens expressed during the extra and intraepithelial stages of infection. We developed an in vitro model utilizing polarizing cells expressing the murine pIgR together with antigen-specific mouse IgA, and an in vivo model utilizing pIgR-/- mice. SIgA targeting the extraepithelial chlamydial antigen, the major outer membrane protein (MOMP), significantly reduced infection in vitro by 24 % and in vivo by 44 %. Conversely, pIgR-mediated delivery of IgA targeting the intraepithelial inclusion membrane protein A (IncA) bound to the inclusion but did not reduce infection in vitro or in vivo. Similarly, intraepithelial IgA targeting the secreted protease Chlamydia protease-like activity factor (CPAF) also failed to reduce infection. Together, these data suggest the importance of pIgR-mediated delivery of IgA targeting extra but not intraepithelial chlamydial antigens for protection against a genital tract infection.

Catalytic activity evaluation of industrial Pd/C catalyst via gray-box dynamic modeling and simulation of hydropurification reactor

In this paper, dynamic modeling and simulation of the hydropurification reactor in a purified terephthalic acid production plant has been investigated by gray-box technique to evaluate the catalytic activity of palladium supported on carbon (0.5 wt.% Pd/C) catalyst. The reaction kinetics and catalyst deactivation trend have been modeled by employing artificial neural network (ANN). The network output has been incorporated with the reactor first principle model (FPM). The simulation results reveal that the gray-box model (FPM and ANN) is about 32 percent more accurate than FPM. The model demonstrates that the catalyst is deactivated after eleven months. Moreover, the catalyst lifetime decreases about two and half months in case of 7 percent increase of reactor feed flowrate. It is predicted that 10 percent enhancement of hydrogen flowrate promotes catalyst lifetime at the amount of one month. Additionally, the enhancement of 4-carboxybenzaldehyde concentration in the reactor feed improves CO and benzoic acid synthesis. CO is a poison to the catalyst, and benzoic acid might affect the product quality. The model can be applied into actual working plants to analyze the Pd/C catalyst efficient functioning and the catalytic reactor performance.

Performance evaluation of cloud-based parallel computing

As computational models in fields such as medicine and engineering get more refined, resource requirements are increased. In a first instance, these needs have been satisfied using parallel computing and HPC clusters. However, such systems are often costly and lack flexibility. HPC users are therefore tempted to move to elastic HPC using cloud services. One difficulty in making this transition is that HPC and cloud systems are different, and performance may vary. The purpose of this study is to evaluate cloud services as a means to minimise both cost and computation time for large-scale simulations, and to identify which system properties have the most significant impact on performance. Our simulation results show that, while the performance of Virtual CPU (VCPU) is satisfactory, network throughput may lead to difficulties.

Evaluation framework to assess benefits and harms of bone-anchored prosthesis

Bone-anchored prostheses are increasingly acknowledged as viable alternative method of attachment of artificial limb compared to socket-suspended prostheses. To date, a few osseointegration fixations are commercially available. Several devices are at different stages of development particularly in Europe and the US. Clearly, the current momentum experienced worldwide is creating a need for a standardized evaluation framework to assess the benefits and safety of each procedure.

Evaluation of the performance of a dengue outbreak detection tool for China

An outbreak detection and response system, using time series moving percentile method based on historical data, in China has been used for identifying dengue fever outbreaks since 2008. For dengue fever outbreaks reported from 2009 to 2012, this system achieved a sensitivity of 100%, a specificity of 99.8% and a median time to detection of 3 days, which indicated that the system was a useful decision tool for dengue fever control and risk-management programs in China.

The role of affect in consumer evaluation of health care services

Health care services are typically consumed out of necessity, typically to recover from illness. While the consumption of health care services can be emotional given that consumers experience fear, hope, relief, and joy, surprisingly, there is little research on the role of consumer affect in health care consumption. We propose that consumer affect is a heuristic cue that drives evaluation of health care services. Drawing from cognitive appraisal theory and affect-as-information theory, this article tests a research model (N = 492) that investigates consumer affect resulting from service performance on subsequent service outcomes.

Empirical evaluation of the travel time reliability indicators: A case study for Brisbane corridor under recurrent and non-recurrent conditions

This research quantifies traffic congestion and travel time reliability with case study on a major arterial road in Brisbane. The focus is on the analysis of impact of incidents (e.g., road accidents) on travel time reliability. Real traffic (Bluetooth) and incident records from Coronation Drive, Brisbane are utilized for the study. The findings include significant impact of incidents on traffic congestion and travel time reliability. The knowledge gained is useful in various applications such as traveler information systems, and cost-benefit analysis of various strategies to reduce the traffic incidents and its' impacts.

Outcome evaluation framework for the Queensland Alcohol Ignition Interlock Program. Report to Queensland Department of Transport and Main Roads (TMR 3814)

The Queensland Department of Transport and Main Roads (TMR) required an evaluation framework for the Queensland Alcohol Ignition Interlock Program (AIIP). The objective of this project was to develop a framework to evaluate the AIIP in terms of its effect on road safety outcomes.

Evaluation of ANPR trials for traffic policing in Queensland. Report to the Queensland Police Service, State Traffic Support Branch

In response to the Travelsafe Committee Report No. 51 – report on the inquiry into Automatic Plate Recognition Technology – it was recommended that the Queensland Police Service continue to trial the deployment of ANPR technology for traffic enforcement work and to evaluate the road safety impacts and operational effectiveness of the technology. As such, the purpose of this report is to provide an independent evaluation of a trial of ANPR that was conducted by a project team within the State Traffic Support Branch of the Queensland Police Service (QPS) and provide recommendations as to the applicability and usability of the technology for use throughout Queensland...

Evaluation of internal navigation sensor suites for underground mining vehicle navigation

This paper describes a series of trials that were done at an underground mine in New South Wales, Australia. Experimental results are presented from the data obtained during the field trials and suitable sensor suites for an autonomous mining vehicle navigation system are evaluated.

The Lymphedema Evaluation in Gynecological cancer Study (LEGS): Design of a prospective, longitudinal, cohort study

Background The Lymphoedema Evaluation in Gynecological cancer Study (LEGS) was a longitudinal, observational, cohort study prospectively evaluating the incidence and risk factors of lower-limb lymphedema after treatment for gynecological cancer. Here we describe the study protocol and characteristics of the sample. Methods Women with a newly diagnosed gynecological cancer between June 1, 2008 and February 28, 2011, aged 18 years or older, and treated at one of six hospitals in Queensland, Australia, were eligible. Lymphedema was assessed by circumference measurements, bioimpedance spectroscopy, and self-reported swelling. LEGS incorporated a cohort of patients requiring surgery for benign gynecological conditions for comparison purposes. Data were collected prior to surgery and at regular intervals thereafter up to 2-years post-diagnosis. Results 546 women participated (408 cancer, 138 benign), with a 24-month retention rate of 78%. Clinical and treatment characteristics of participants were similar to the Queensland gynecological cancer population, except for a higher proportion of early-stage cervical cancers recruited to LEGS compared with Queensland proportions (89% versus 55%, respectively). Discussion Few imbalances were observed between participants with complete and incomplete follow-up data. The prospective design and collection of objective and patient-reported outcome data will allow comprehensive assessment of incidence and risk factors of lower-limb lymphedema.

Where to after Drink Rite: An evaluation of opportunities for police and community promotion of an anti-drink driving message in the licensed venue setting. Report to the National Drug Strategy Law Enforcement Funding Committee

Estimating the prevalence of drink driving is a difficult task. Self‐reported drink driving indicates that drink driving is far more common than official statistics suggest. In order to promote a responsible attitude towards alcohol consumption and drink driving within the Queensland community, the Queensland Police Service, Queensland Health and Queensland Transport developed the ‘Drink Rite’ program (Queensland Police Service information sheet, 2009). However, the feasibility of the program is now in doubt as the National Health and Medical Research Council’s guidelines for alcohol consumption changed in 2009 to state “For healthy men and women, drinking no more than four standard drinks on a single occasion reduces the risk of alcohol‐related injury arising from that occasion” (NHMRC Publication, 2009, p. 51). As such, adhering to the NHMRC guidelines places restrictions on how the existing Drink Rite program can be operated (i.e. by reducing the number of standard drinks provided to participants from eight to four). It is arguable that a reduction in the number of alcoholic drinks provided to participants in the program will result in a large reduction in observed BAC readings. This, in turn, will lead to a potential loss of message content when discussing the variation in the effects of alcohol.

Driving simulator evaluation of the failure of an audio in-vehicle warning for railway level crossings

It is impracticable to upgrade the 18,900 Australian passive crossings as such crossings are often located in remote areas, where power is lacking and with low road and rail traffic. The rail industry is interested in developing innovative in-vehicle technology interventions to warn motorists of approaching trains directly in their vehicles. The objective of this study was therefore to evaluate the benefits of the introduction of such technology. We evaluated the changes in driver performance once the technology is enabled and functioning correctly, as well as the effects of an unsafe failure of the technology? We conducted a driving simulator study where participants (N=15) were familiarised with an in-vehicle audio warning for an extended period. After being familiarised with the system, the technology started failing, and we tested the reaction of drivers with a train approaching. This study has shown that with the traditional passive crossings with RX2 signage, the majority of drivers complied (70%) and looked for trains on both sides of the rail track. With the introduction of the in-vehicle audio message, drivers did not approach crossings faster, did not reduce their safety margins and did not reduce their gaze towards the rail tracks. However participants’ compliance at the stop sign decreased by 16.5% with the technology installed in the vehicle. The effect of the failure of the in-vehicle audio warning technology showed that most participants did not experience difficulties in detecting the approaching train even though they did not receive any warning message. This showed that participants were still actively looking for trains with the system in their vehicle. However, two participants did not stop and one decided to beat the train when they did not receive the audio message, suggesting potential human factors issues to be considered with such technology.

Evaluation of cooperative exploration strategies using full system simulation

This paper compares different state-of-the-art exploration strategies for teams of mobile robots exploring an unknown environment. The goal is to help in determining a best strategy for a given multi-robot scenario and optimization target. Experiments are done in a 2D-simulation environment with 5 robots that are equipped with a horizontal laser range finder. Required components like SLAM, path planning and obstacle avoidance of every robot are included in a full-system simulation. To evaluate different strategies the time to finish exploration, the number of measurements that have been integrated into the map and the development in size of the explored area over time are used. The results of extensive test runs on three environments with different characteristics show that simple strategies can perform fairly well in many situations but specialized strategies can improve performance with regards to their targeted evaluation measure.

Analysis and evaluation of use of the V1 and South East Freeway Bicycleway post completion of Stage C of the V1

Executive Summary: Completion of the Veloway 1 (V1) will provide a dedicated and safe route for cyclists between the Brisbane CBD and the Gateway Motorway off-ramp at Eight Mile Plains alongside the South East Motorway. The V1 is being delivered in stages and when completed will provide a dedicated 3m wide cycleway 17km in length. Two stages (D and E) remain to be constructed to complete the V1. Major trip attractors along the V1 include the Mater, Princes Alexandra and Greenslopes Hospitals, two campuses of Griffith University, Garden City shopping centre and the Australian Tax Office. This report assesses the available evidence on the impacts on cycling behaviour of the recently completed V1 Stage C. The data sources informing this review include three intercept surveys, motion activated traffic cameras and travel time surveys on the V1 and adjoining South East Freeway Bikeway (SEFB), Strava app data, and cyclist crash data along Logan Road. The key findings from the evidence are that the completed V1 Stage C has: a Attracted cyclists from Holland Park, Holland Park West, Mt Gravatt and southern parts of Tarragindi onto the V1 Stage C. b Reduced the crash exposure of pedestrians to cyclists by attracting higher speed cyclists off the adjoining SEFB onto the cycling dedicated V1 Stage C. c Reduced the potential crash exposure of cyclists to motor vehicles by attracting cyclists off Logan Road on to the V1. d Provided travel time benefits to cyclists and reduced road crossings (eight down to two). e Predominantly attracted adults commuting alone to and from work and university. The evidence shows that the two traffic crossings across Birdwood Road (required as a temporary measure until the V1 is completed) negate much of the travel time gains of the V1 Stage C compared to the adjoining SEFB for southbound cyclists. Many cyclists accessing the V1 Stage C from the south are cycling in high-volume vehicular traffic lanes to reduce their travel time along Birdwood Road, but in the process are increasing their exposure to crashes with motor vehicles. Based on these findings this report recommends that TMR: a. Continue with plans to complete the V1 Veloway b. Undertake an engineering feasibility assessment to determine the viability of constructing a section of the V1 Stage E from the intersection Weller and Birdwood Roads over Marshall Road and along Bapaume Road on the western side of the Motorway to the intersection of Bapaume and Sterculia Roads. c. In the interim, improve signage and Birdwood Road crossing points for cyclists accessing and egressing the southern end of the V1 Stage C. d. Work with Brisbane City Council to identify the safest and most practical bicycle facilities to facilitate cycle travel between Logan Road and the V1 south of Birdwood Road. e. Improve the awareness of the V1 Stage C through signage for cyclists approaching from the north with the aim of providing a better understanding of the route of the V1 to the south. f. Refine the use of motion activated traffic cameras to improve the capture rate of useable images and obtain an ongoing collection over time of V1 usage data. g. Undertake discussions with Strava, Inc. to refine the presentation of Strava data to improve visual understanding of maps showing before and after cycle route volumes along and on roads leading to the V1.