Scoping work integrated learning purposes, practices and issues

A range of terms is used in Australian higher education institutions to describe learning approaches and teaching models that provide students with opportunities to engage in learning connected to the world of work. The umbrella term currently being used widely is Work Integrated Learning (WIL). The common aim of approaches captured under the term WIL is to integrate discipline specific knowledge learnt in university setting with that learnt in the practice of work through purposefully designed curriculum. In endeavours to extend WIL opportunities for students, universities are currently exploring authentic learning experiences, both within and outside of university settings. Some universities describe these approaches as ‘real world learning’ or ‘professional learning’. Others refer to ‘social engagement’ with the community and focus on building social capital and citizenship through curriculum design that enables students to engage with the professions through a range of learning experiences. This chapter discusses the context for, the scope, purposes, characteristics and effectiveness of WIL across Australian universities as derived from a national scoping study. This study, undertaken in response to a high level of interest in WIL, involved data collection from academic and professional staff, and students at nearly all Australian universities. Participants in the study consistently reported the benefits, especially in relation to the student learning experience. Responses highlight the importance of strong partnerships between stakeholders to facilitate effective learning outcomes and a range of issues that shape the quality of approaches and models being adopted, in promoting professional learning.

Work integrated learning for life : encouraging agentic engagement

In a rapidly changing world where new work patterns impact on our health, relationships and social fabric, it is critical that we reconsider the role universities could or should play in helping students prepare for the complexities of the 21st century. Efforts to respond to economic imperatives such as the skills shortage have seen a rush to embed work integrated and career development learning in the curriculum as well as a strengthening of the discourse that the university’s role is primarily to produce industry ready or ‘oven ready and self basting’ graduates (Atkins, 1999). This narrow focus on ‘giving industry what industry wants’ (Patrick, Peach & Pocknee, 2009) ignores the importance of helping students develop the types of skills and dispositions they will need. To enable students to thrive not just survive socially and economically in a radically unknowable world, where knowledge becomes obsolete, we need to be ready to develop new futures (Barnett, 2004). This paper considers the concept of ‘work’, the role it plays in our lives, and our aspirations to build sustainable, socially connected communities. We revisit the assumptions underlying the employability argument (Atkins, 1999) in the light of changing notions of work (Hagel, Seely Brown & Davison, 2010), and the need for higher education to contribute to a better and more sustainable society (Pocock, 2003). Specifically we present initiatives developed from work integrated learning (WIL) programs in the United Kingdom and Australia, where WIL programs are framed within the broader context of real world and life-wide curriculum (Jackson, 2010), and where transferable skills and elements of work-related learning programs prepare students for less certain job futures. Such approaches encourage students to take an agentic role (Billett & Pavlova, 2005) in selecting their work possibilities to develop resilience and capabilities to deal with new and challenging situations, assisting students to become who they want to be not just what they want to be. The theoretical and operational implications and challenges of shaping real world and life-wide curriculum will be investigated in more depth in the next phase of this research.

The WIL (Work Integrated Learning) report : a national scoping study [Final Report]

This report provides an account of the first large-scale scoping study of work integrated learning (WIL) in contemporary Australian higher education. The explicit aim of the project was to identify issues and map a broad and growing picture of WIL across Australia and to identify ways of improving the student learning experience in relation to WIL. The project was undertaken in response to high levels of interest in WIL, which is seen by universities both as a valid pedagogy and as a means to respond to demands by employers for work-ready graduates, and demands by students for employable knowledge and skills. Over a period of eight months of rapid data collection, 35 universities and almost 600 participants contributed to the project. Participants consistently reported the positive benefits of WIL and provided evidence of commitment and innovative practice in relation to enhancing student learning experiences. Participants provided evidence of strong partnerships between stakeholders and highlighted the importance of these relationships in facilitating effective learning outcomes for students. They also identified a range of issues and challenges that face the sector in growing WIL opportunities; these issues and challenges will shape the quality of WIL experiences. While the majority of comments focused on issues involved in ensuring quality placements, it was recognised that placements are just one way to ensure the integration of work with learning. Also, the WIL experience is highly contextualised and impacted by the expectations of students, employers, the professions, the university and government policy.

Natural convection and heat transfer in attics subject to periodic thermal forcing

The heat transfer through the attics of buildings under realistic thermal forcing has been considered in this study. A periodic temperature boundary condition is applied on the sloping walls of the attic to show the basic flow features in the attic space over diurnal cycles. The numerical results reveal that, during the daytime heating stage, the flow in the attic space is stratified; whereas at the night-time cooling stage, the flow becomes unstable. A symmetrical solution is seen for relatively low Rayleigh numbers. However, as the Ra gradually increases, a transition occurs at a critical value of Ra. Above this critical value, an asymmetrical solution exhibiting a pitchfork bifurcation arises at the night-time. It is also found that the calculated heat transfer rate at the night-time cooling stage is much higher than that during the daytime heating stage.

Scaling of free convection heat transfer in a triangular cavity for Pr>1

Unsteady natural convection inside a triangular cavity subject to a non-instantaneous heating on the inclined walls in the form of an imposed temperature which increases linearly up to a prescribed steady value over a prescribed time is reported. The development of the flow from start-up to a steady-state has been described based on scaling analyses and direct numerical simulations. The ramp temperature has been chosen in such a way that the boundary layer is reached a quasi-steady mode before the growth of the temperature is completed. In this mode the thermal boundary layer at first grows in thickness, then contracts with increasing time. However, if the imposed wall temperature growth period is sufficiently short, the boundary layer develops differently. It is seen that the shape of many houses are isosceles triangular cross-section. The heat transfer process through the roof of the attic-shaped space should be well understood. Because, in the building energy, one of the most important objectives for design and construction of houses is to provide thermal comfort for occupants. Moreover, in the present energy-conscious society it is also a requirement for houses to be energy efficient, i.e. the energy consumption for heating or air-conditioning houses must be minimized.

A review of natural convection and heat transfer in attic-shaped space

This paper presents a review of studies on natural convection heat transfer in the triangular enclosure namely, in attic-shaped space. Much research activity has been devoted to this topic over the last three decades with a view to providing thermal comfort to the occupants in attic-shaped buildings and to minimising the energy costs associated with heating and air-conditioning. Two basic thermal boundary conditions of attic are considered to represent hot and cold climates or day and night time. This paper also reports on a significant number of studies which have been performed recently on other topics related to the attic space, for example, attics subject to localized heating and attics filled with porous media.

Ensuring student success : the role of support services in improving the quality of the student learning experience

This paper is based on the premise that universities have an obligation to provide adequate student support services, such as learning assistance (that is, assistance with academic writing and other study skills) and that in order to be effective such services must be responsive to the wider policy and social implications of student attrition and retention. The paper outlines briefly some of the factors that have influenced the development of learning assistance practices in Australia and America. This is followed by an account of experiences at one Australian metropolitan university where learning assistance service provision shifted from a decentralised, faculty-based model to a centralised model of service delivery. This shift was in response to concerns about lack of quality and consistency in a support model dependent upon faculty resources yet a follow up study identified other problems in the centralised delivery of learning assistance services. These problems, clustered under the heading contextualised versus decontextualised learning assistance, include the relevance of generic learning assistance services to students struggling with specific course related demands; the apparent tensions between challenging students and assisting students at risk of failure; and variations in the level of collaboration between learning advisers and academic staff in supporting students in the learning environment. These problems are analysed using the theoretical modelling derived from the tools made available through cultural historical activity theory and expansive visibilisation (Engeström & Miettinen, 1999).