Using mobile technology and augmented reality to increase data reliability for environmental assessment

Climate change and land use pressures are making environmental monitoring increasingly important. As environmental health is degrading at an alarming rate, ecologists have tried to tackle the problem by monitoring the composition and condition of environment. However, traditional monitoring methods using experts are manual and expensive; to address this issue government organisations designed a simpler and faster surrogate-based assessment technique for consultants, landholders and ordinary citizens. However, it remains complex, subjective and error prone. This makes collected data difficult to interpret and compare. In this paper we describe a work-in-progress mobile application designed to address these shortcomings through the use of augmented reality and multimedia smartphone technology.

Towards configuring the Internet for social development in the Philippines

The Internet is one of the most significant information and communication technologies to emerge during the end of the last century. It created new and effective means by which individuals and groups communicate. These advances led to marked institutional changes most notably in the realm of commercial exchange: it did not only provide the high-speed communication infrastructure to business enterprises; it also opened them to the global consumer base where they could market their products and services. Commercial interests gradually dominated Internet technology over the past several years and have been a factor in the increase of its user population and enhancement of infrastructure. Such commercial interests fitted comfortably within the structures of the Philippine government. As revealed in the study, state policies and programs make use of Internet technology as an enabler of commercial institutional reforms using traditional economic measures. Yet, despite efforts to maximize the Internet as an enabler for market-driven economic growth, the accrued benefits are yet to come about; it is largely present only in major urban areas and accessible to a small number of social groups. The failure of the Internet’s developmental capability can be traced back to the government’s wholesale adoption of commercial-centered discourse. The Internet’s developmental gains (i.e. instrumental, communicative and emancipatory) and features, which were always there since its inception, have been visibly left out in favor of its commercial value. By employing synchronic and diachronic analysis, it can be shown that the Internet can be a vital technology in promoting genuine social development in the Philippines. In general, the object is to realize a social environment of towards a more inclusive and participatory application of Internet technology, equally aware of the caveats or risks the technology may pose. It is argued further that there is a need for continued social scientific research regarding the social as and developmental implications of Internet technology at local level structures, such social sectors, specific communities and organizations. On the meta-level, such approach employed in this research can be a modest attempt in increasing the calculus of hope especially among the marginalized Filipino sectors, with the use of information and communications technologies. This emerging field of study—tentatively called Progressive Informatics—must emanate from the more enlightened social sectors, namely: the non-government, academic and locally-based organizations.

Re-use of domain knowledge to provide confidence for adoption of off-site manufacturing for construction in Australia

Many construction industry decision-makers believe there is a lack of off-site manufacture (OSM) adoption for non-residential construction in Australia. Identification of construction business process was considered imperative in order to assist decision-makers to increase OSM utilisation. The premise that domain knowledge can be re-used to provide an intervention point in the construction process led a team of researchers to construct simple base-line process models for the complete construction process, segmented into six phases. Sixteen domain knowledge industry experts were asked to review the construction phase base-line models to answer the question “Where in the process illustrated by this base-line model phase is an OSM task?”. Through an iterative and generative process a number of off-site manufacture intervention points were identified and integrated into the process models. The re-use of industry expert domain knowledge provided suggestions for new ways to do basic tasks thus facilitating changes to current practice. It is expected that implementation of the new processes will lead to systemic industry change and thus a growth in productivity due to increased adoption of OSM.

A boy and his toys : technology and gadgetry in the James Bond films

This chapter provides an indepth examination of the history of product placement in the James Bond film series, specifically focusing on the emergence of technology and gadgetry in the series and the impact this had on the number and types of products that were placed in the films.

e-Technology v t-Engagement : a snapshot of Australia's digital economy readiness

Before e-Technology’s effects on users can be accurately measured, those users must be fully engaged with the relevant systems and services. That is they must be able to function as part of the digital economy. The paper refers to this ‘user functionality’ as t-Engagement. Not all users are t-Engaged and in many instances achieving t-Engagement will require assistance from external sources. This paper identifies the current state of Australia’s regional digital economy readiness and highlights the role of Local Government Authorities (‘LGAs’) in enabling t-Engagement. The paper analyses responses to the 2012 BTA, NBN and Digital Economy Survey by LGA and other regional organizations within Australia. The paper’s particular focus is on the level of use by Local Government Authorities of federal, state and other programs designed to enable t-Engagement. The analysis confirms the role of LGAs in enabling t-Engagement and in promoting Australia’s digital economy. The paper concludes by reinforcing the need to ensure ongoing meaningful federal and State support of regional initiatives, as well as identifying issues requiring specific attention.

Visioning technology-based simulated learning environments in the social work curriculum

This report, prepared by QUT Social Work and Human Services, in collaboration with key sector stakeholders, identifies the current and potentially expanded uses of Simulated Learning Environments (SLE) as part of the Health Workforce Australia (HWA) National Project. An expert Reference Group guided the project, facilitated the data collection, and provided feedback and support on the findings and broad recommendations.

A snapshot of radiation therapy techniques and technology in Queensland : an aid to mapping undergraduate curriculum

Introduction: Undergraduate students studying the Bachelor of Radiation Therapy at Queensland University of Technology (QUT) attend clinical placements in a number of department sites across Queensland. To ensure that the curriculum prepares students for the most common treatments and current techniques in use in these departments, a curriculum matching exercise was performed. Methods: A cross-sectional census was performed on a pre-determined “Snapshot” date in 2012. This was undertaken by the clinical education staff in each department who used a standardized proforma to count the number of patients as well as prescription, equipment, and technique data for a list of tumour site categories. This information was combined into aggregate anonymized data. Results: All 12 Queensland radiation therapy clinical sites participated in the Snapshot data collection exercise to produce a comprehensive overview of clinical practice on the chosen day. A total of 59 different tumour sites were treated on the chosen day and as expected the most common treatment sites were prostate and breast, comprising 46% of patients treated. Data analysis also indicated that intensity-modulated radiotherapy (IMRT) use is relatively high with 19.6% of patients receiving IMRT treatment on the chosen day. Both IMRT and image-guided radiotherapy (IGRT) indications matched recommendations from the evidence. Conclusion: The Snapshot method proved to be a feasible and efficient method of gathering useful

Assessment of real-time networks and timing for process bus applications

Widespread adoption by electricity utilities of Non-Conventional Instrument Transformers, such as optical or capacitive transducers, has been limited due to the lack of a standardised interface and multi-vendor interoperability. Low power analogue interfaces are being replaced by IEC 61850 9 2 and IEC 61869 9 digital interfaces that use Ethernet networks for communication. These ‘process bus’ connections achieve significant cost savings by simplifying connections between switchyard and control rooms; however the in-service performance when these standards are employed is largely unknown. The performance of real-time Ethernet networks and time synchronisation was assessed using a scale model of a substation automation system. The test bed was constructed from commercially available timing and protection equipment supplied by a range of vendors. Test protocols have been developed to thoroughly evaluate the performance of Ethernet networks and network based time synchronisation. The suitability of IEEE Std 1588 Precision Time Protocol (PTP) as a synchronising system for sampled values was tested in the steady state and under transient conditions. Similarly, the performance of hardened Ethernet switches designed for substation use was assessed under a range of network operating conditions. This paper presents test methods that use a precision Ethernet capture card to accurately measure PTP and network performance. These methods can be used for product selection and to assess ongoing system performance as substations age. Key findings on the behaviour of multi-function process bus networks are presented. System level tests were performed using a Real Time Digital Simulator and transformer protection relay with sampled value and Generic Object Oriented Substation Events (GOOSE) capability. These include the interactions between sampled values, PTP and GOOSE messages. Our research has demonstrated that several protocols can be used on a shared process bus, even with very high network loads. This should provide confidence that this technology is suitable for transmission substations.

Principals, Teachers, and Student's Perception of the Information and Communication Technology in Kuwait Secondary Schools (Rhetoric and reality)

ICT integration has been advocated to provide opportunities to improve students’ achievement and engagement through transforming the educational setting. A valuable tool that contributes in enhancing and developing students’ cognitive skills for lifelong learning, ICT integration has introduced a new educational philosophy, shifting the role of students into a more central position in the pedagogical processes. Kuwait, as with many other countries, has recently planned ICT integration to develop its citizen’s capacities. This study sought to capture the principals’, teachers’, and students’ perceptions of ICT integration in pedagogical activities, as well as how ICT is being used for learning and teaching activities in three ICT leading Kuwaiti secondary schools. Interviews with principals, teachers, and students were conducted, along with an open-ended questionnaire for the teachers, researcher observations, and document analysis. The findings revealed that ICT integration in Kuwait needed to be reinforced to accomplish the ICT integration objectives. A call for further support for teachers, and a reconsideration of the ICT integration strategies were also recommended.

Innovative Leadership by School Principals : embedding Information Communication and Technology in Kuwaiti Schools

Kuwait is an oil rich country planning for a future that is not dependent on exploiting natural resources. A major policy initiative has been the introduction of Information Communication and Technology (ICT) to schools. However, contextual issues and teacher capabilities in the use of ICT have limited the success of this initiative. The study examines the leadership strategies of two secondary school principals whose schools have achieved this goal. The case study draws on intensive data collected through interviews of the principals, and teachers supported by document analysis and observations. Analysis was guided by theoretical perspectives drawn from the literature which identified a range of strategies used by the principals to manage change. The principals of Schools A and B employed three key strategies to maximise the impact on the teaching staff incorporating ICT into their teaching and learning practices. These strategies were: (a) encouragement for teaching staff to implement ICT in their teaching; (b) support to meet the material and human needs of teaching staff using ICT; and (c) provision of instructions and guidance for teaching staff in how and why such behaviours and practices should be performed. The outcome of this study proposes an innovative change leadership model that informs emerging countries, which are also undergoing major change related to ICT. However, the study also revealed limitations in the implementation of ICT in the classroom and provides insights into further strategies that principals need to adopt.

Higher degree research at Australian Universities : Responding to diversity in engineering and information technology

BACKGROUND There is increasing enrolment of international students in the Engineering and Information Technology disciplines and anecdotal evidence of a need for additional understanding and support for these students and their supervisors due to differences both in academic and social cultures. While there is a growing literature on supervisory styles and guidelines on effective supervision, there is little on discipline-specific, cross-cultural supervision responding to the growing diversity. In this paper, we report findings from a study of Engineering and Information technology Higher Degree Research (HDR)students and supervision in three Australian universities. PURPOSE The aim was to assess perceptions of students and supervisors of factors influencing success that are particular to international or culturally and linguistically diverse (CaLD) HDR students in Engineering and Information technology. DESIGN/METHOD Online survey and qualitative data was collected from international and CaLD HDR students and supervisors at the three universities. Bayesian network analysis, inferential statistics, and qualitative analysis provided the main findings. RESULTS Survey results indicate that both students and supervisors are positive about their experiences, and do not see language or culture as particularly problematic. The survey results also reveal strong consistency between the perceptions of students and supervisors on most factors influencing success. Qualitative analysis of critical supervision incidents has provided rich data that could help improve support services. CONCLUSIONS In contrast with anecdotal evidence, HDR completion data from the three universities reveal that international students, on average, complete in shorter time periods than domestic students. The analysis suggests that success is linked to a complex set of factors involving the student, supervision, the institution and broader community.

Feasibility of using telecommunications technology in a Cardiac-Diabetes Self-Management Program

Background: Evidence demonstrates self-management programs are an effective approach to assist patients with chronic diseases such as type 2 diabetes or cardiac conditions to modify their lifestyle for better managing their conditions. Using information technology (IT) has great potential to support self-management programs and assist patients to fulfill their goals in managing their conditions more efficiently and effectively. Examples of different types of technology used in self-management programs that have limited research support include: text messages, telephone followup, web-based programs, and other internet-assisted education. But little is known about the applicability and feasiability of different forms of technology for patients with chronic diseases such as those with type 2 diabetes and critical cardiac conditions. Furthermore, although there is some evidence of the benefits of using IT in supporting self-management programs, further research on the use of IT in such programs is recommended. Objective: To develop and pilot test an integrated Cardiac- Diabetes Self-Management Program (CDSMP) incorporating telephone and text-message follow-up. Methods: A pilot study using randomised controlled trial is conducted in the coronary care unit (CCU) in a Brisbane metropolitan hospital in Australia to collect data on patients with type 2 diabetes admitted to CCU. The main outcomes included self-efficacy levels, knowledge, and quality of life. Results: Initial results reveal that patients with diabetes admitted to the CCU in the experimental group did improve their self-efficacy, and knowledge levels. Acknowledgements: This Project is funded by QUT Early Career Researcher Research Grant

ICT in vocational education and training: a view of information and communication technology in vocational education in New Zealand

This report looks at opportunities in relation to what is either already available or starting to take off in Information and Communication Technology (ICT). ICT focuses on the entire system of information, communication, processes and knowledge within an organisation. It focuses on how technology can be implemented to serve the information and communication needs of people and organisations. An ICT system involves a combination of work practices, information, people and a range of technologies and applications organised to make the business or organisation fully functional and efficient, and to accomplish goals in an organisation. Our focus is on vocational, workbased education in New Zealand. It is not about eLearning, although we briefly touch on the topic. We provide a background on vocational education in New Zealand, cover what we consider to be key trends impacting workbased, vocational education and training (VET), and offer practical suggestions for leveraging better value from ICT initiatives across the main activities of an Industry Training Organisation (ITO). We use a learning value chain approach to demonstrate the main functions ITOs engage in and also use this approach as the basis for developing and prioritising an ICT strategy. Much of what we consider in this report is applicable to the wider tertiary education sector as it relates to life-long learning. We consider ICT as an enabler that: a) connects education businesses (all types including tertiary education institutions) to learners, their career decisions and their learning, and as well, b) enables those same businesses to run more efficiently. We suggest that these two sets of activities are considered as interconnected parts of the same education or training business ICT strategy.

Leveraging R&D Investment for the Australian Built Environment : Industry Report

The overarching goal of this project is to better match funding strategies to industry needs to maximise the benefits of R&D to Australia’s infrastructure and building industry. Project partners are: Queensland Department of Public Works; Queensland Transport and Main Roads; Western Australian Department of Treasury and Finance; John Holland; Queensland University of Technology; Swinburne University of Technology; and VTT Technical Research Centre of Finland (Prof Göran Roos). This project has been endorsed by the Australian Built Environment Industry Innovation Council (BEIIC) with Council member Prof Catherin Bull serving on this project’s Steering Committee. This project seeks to: (i) maximise the value of R&D investment in this sector through improved understanding of future industry research needs; and (ii) address the perceived problem of a disproportionately low R&D investment in this sector, relative to the size and national importance of the sector. This research will develop new theory built on open innovation, dynamic capabilities and absorptive capacity theories in the context of strategic foresighting and roadmapping activities. Four project phases have been designed to address this research: 1: Audit and analysis of R&D investment in the Australian built environment since 1990 - access publically available data relating to R&D investments across Australia from public and private organisations to understand past trends. 2: Examine diffusion mechanisms of research and innovation and its impact on public and private organisations – investigate specific R&D investments to determine the process of realising research support, direction-setting, project engagement, impacts and pathways to adoption. 3: Develop a strategic roadmap for the future of this critical Australian industry - assess the likely future landscapes that R&D investment will both respond to and anticipate. 4: Develop policy to maximise the value of R&D investments to public and private organisations – through translating project learnings into policy guidelines.

The emerging role of the Board of Directors in enterprise business technology governance

In an increasingly business technology (BT) dependent world, the impact of the extraordinary changes brought about by the nexus of mobile and cloud technologies, social media and big data is increasingly being felt in the board room. As leaders of enterprises of every type and size, board directors can no longer afford to ignore, delegate or avoid BT-related decisions. Competitive, financial and reputational risk is increased if boards fail to recognize their role in governing technology as an asset and in removing barriers to improving enterprise business technology governance (EBTG). Directors’ awareness of the need for EBTG is increasing. However, industry research shows that board level willingness to rectify the gap between awareness and action is very low or non-existent. This literature review-based research identifies barriers to EBTG effectiveness. It provides a practical starting point for board analysis. We offer four outcomes that boards might focus on to ensure the organizations they govern are not left behind by those led by the upcoming new breed of technology-savvy leaders. Most extant research looks backward for examples, examining data pre-2010, the time when a tipping point in the personal and business use of multimedia and mobile-internet devices significantly deepened the impacts of the identified nexus technology forces, and began rapidly changing the way many businesses engage with their customers, employees and stakeholders. We situate our work amidst these nexus forces, discuss the board’s role in EBTG in this context, and modernize current definitions of enterprise technology governance. The primary limitation faced is the lack of scholarly research relating to EBTG in the rapidly changing digital economy. Although we have used recent (2011 - 2013) industry surveys, the volume of these surveys and congruence across them is significant in terms of levels of increased awareness and calls for increased board attention and competency in EBTG and strategic information use. Where possible we have used scholarly research to illustrate or discuss industry findings.