Mapping, monitoring, and modelling of hazardous waste sites

Management of the industrial nations' hazardous waste is a current and exponentially increasing, global threatening situation. Improved environmental information must be obtained and managed concerning the current status, temporal dynamics and potential future status of these critical sites. To test the application of spatial environmental techniques to the problem of hazardous waste sites, as Superfund (CERCLA) test site was chosen in an industrial/urban valley experiencing severe TCE, PCE, and CTC ground water contamination. A paradigm is presented for investigating spatial/environmental tools available for the mapping, monitoring and modelling of the environment and its toxic contaminated plumes. This model incorporates a range of technical issues concerning the collection of data as augmented by remotely sensed tools, the format and storage of data utilizing geographic information systems, and the analysis and modelling of environment through the use of advance GIS analysis algorithms and geophysic models of hydrologic transport including statistical surface generation. This spatial based approach is evaluated against the current government/industry standards of operations. Advantages and lessons learned of the spatial approach are discussed.

Protecting web 2.0 services from botnet exploitations

Recently, botnet, a network of compromised computers, has been recognized as the biggest threat to the Internet. The bots in a botnet communicate with the botnet owner via a communication channel called Command and Control (C & C) channel. There are three main C & C channels: Internet Relay Chat (IRC), Peer-to-Peer (P2P) and web-based protocols. By exploiting the flexibility of the Web 2.0 technology, the web-based botnet has reached a new level of sophistication. In August 2009, such botnet was found on Twitter, one of the most popular Web 2.0 services. In this paper, we will describe a new type of botnet that uses Web 2.0 service as a C & C channel and a temporary storage for their stolen information. We will then propose a novel approach to thwart this type of attack. Our method applies a unique identifier of the computer, an encryption algorithm with session keys and a CAPTCHA verification.

Development of Mobile Web App "ESP" for DeepBlue to interrogate how an audience is thinking

DeepBlue is much more than just an orchestra. Their innovative approach to audience engagement led it to develop ESP, their Electronic Show Programme web app which allows for real-time (synchronous) and delayed (asynchronous) audience interaction, customer feedback and research. The show itself is driven invisibly by a music technology operating system (currently QUT's Yodel) that allows them to adapt to a wide range of performance venues and varied types of presentation. DeepBlue's community engagement program has enabled over 5,500 young musicians and community choristers to participate in professional productions, it is also a cornerstone of DeepBlue's successful business model. You can view the ESP mobile web app at m.deepblue.net.au if you view this and only the landing page is active, there is not a show taking place or imminent. ESP prototype has already been used for 18 months. Imagine knowing what your audience really thinks – in real time so you can track their feelings and thoughts through the show. This tool has been developed and used by the performing group DeepBlue since late 2012 in Australia and Asia (even translated into Vietnamese). It has mostly superseded DeepBlue's SMS realtime communication during a show. It enables an event presenter or performance group to take the pulse of an audience through a series of targeted questions that can be anonymous or attributed. This will help build better, long-lasting, and more meaningful relationships with groups and individuals in the community. This can take place on a tablet, mobile phone or future platforms. There are three organisations trialling it so far.

Living City 2013 Workshop

Living City 2013 Workshop, as part of a school term’s design-based curriculum connected to the KGSC/QUT Design Excellence Program and run from 11 February – 1 May, 2013, was essentially a three-day place-based urban design immersion workshop program for 25 Year 11 Visual Art and Design Students and 2 Teachers from Kelvin Grove State College (KGSC) held at both Queensland University of Technology (QUT) Gardens Point Campus and The Edge, State Library of Queensland. Mentored by 4 design professionals, 2 tertiary design academics, 2 public artists, and 12 QUT tertiary design students, the workshop explored youth-inspired public space design solutions for the active Brisbane City Council redevelopment site of Queens Wharf Road precinct. As well as the face-to-face workshops, for Living City 2013, an interactive web environment was introduced to enable students to connect with each other and program mentors throughout the course of the program. The workshop, framed within notions of ecological, economic, social and cultural sustainability, aimed to raise awareness of the layered complexity and perspectives involved in the design of shared city spaces and to encourage young people to voice their own concerns as future citizens about the shape and direction of their city. The program commenced with an introductory student briefing by stakeholders and mentors at KGSC on 11 February, an introduction to site appraisal and site visit held at QUT and Queens Wharf Road on 20 February, and a follow up site analysis session on 6 March. Day 1 Workshop on April 17 at the Edge, State Library of Queensland, as part of the Design Minds partnership (http://designminds.org.au/kelvin-grove-state-college-excellence-in-art-design/), focused on mentoring team development of a concept design for a range of selected sites. Two workshops on April 22 and 23 at QUT, to develop these designs and presentation schemes, followed this. The workshop program culminated in a visual presentation of concept design ideas and discussion with a public audience in the Ideas Gallery on The Deck, King George Square during the Brisbane City Council City Centre Master Plan Ideas Fiesta on 1 May, 2013, as referenced in the Ideas Fiesta Wrap-up Report (http://www.brisbane.qld.gov.au/planning-building/planning-guidelines-tools/city-centre-master-plan/city-centre-master-plan-ideas-fiesta). Students were introduced to design methodology, team thinking strategies, the scope of design practices and professions, presentation skills and post-secondary pathways, while participating teachers acquired content and design learning strategies transferable in many other contexts. The program was fully documented on the Living City website (http://www.livingcity.net.au/LC2013x/index.html) and has been recognised by the Brisbane City Council Youth Strategy 2014-2019 as a best practice model for making Brisbane a well-designed, subtropical city.

Web crippling tests of hollow flange channel beams – end one flange and interior one flange load cases

LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. The LSBs were commonly used as floor joists and bearers with web openings in residential, industrial and commercial buildings. Due to the unique geometry of LSBs, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSBs. Many research studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear and combined actions. However, to date, no investigation has been conducted into the web crippling behaviour and strength of LSB sections. Hence detailed experimental studies were conducted to investigate the web crippling behaviour and strengths of LSBs under EOF (End One Flange) and IOF (Interior One Flange) load cases. A total of 26 web crippling tests was conducted and the results were compared with current AS/NZS 4600 design rules. This comparison showed that AS/NZS 4600 (SA, 2005) design rules are very conservative for LSB sections under EOF and IOF load cases. Suitable design equations have been proposed to determine the web crippling capacity of LSBs based on experimental results. This paper presents the details of this experimental study on the web crippling behaviour and strengths of LiteSteel beams under EOF and IOF load cases.

Web crippling tests of hollow flange channel beams : ETF AND ITF load cases

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel Beam (LSB) subject to web crippling actions (ETF and ITF). Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear actions and combined actions. To date, however, no investigation has been conducted into the web crippling behaviour and strength of LSB sections under ETF and ITF load conditions. Hence experimental studies were conducted to assess the web crippling behaviour and strengths of LSBs. Twenty eight web crippling tests were conducted and the results were compared with the current AS/NZS 4600[1] and AISI S100 [2]design equations. Comparison of the ultimate web crippling capacities from tests showed that AS/NZS 4600[1] and AISI S100 [2] design equations are unconservative for LSB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs. Suitable design rules were also developed under the DSM format.

Pushing cultural competence boundaries in nutrition and dietetics training

A health workforce ready for safe practice is a government priority, and particularly critical to support indigenous communities closing ‘the gap’. Increased pressure exists on dietetic training programs for quality placements, with fewer opportunities for immersion in Aboriginal and Torres Strait Islander communities to demonstrate cultural competence. In 2012, Queensland University of Technology established a partnership with Apunipima Cape York Health Council with 56 weeks of dietetic placement for 8 students provided to achieve these aims. Clinical practice in Community Public Health Nutrition (CPHN) was structured in a standard 6 week placement, with Individual Case Management (ICM) and Foodservice Management (FSM) integrated across 8 weeks (4 each), with an additional 2 weeks ICM prior in a metropolitan indigenous health service. Students transitioned from urban to rural then remote sites, with new web-based technologies used for support. Strong learning opportunities were provided, with CPHN projects in antenatal and child health, FSM on standardisation of procedures in a 22 bed health facility, and ICM exposing students to a variety of cases via hospital in/outpatients, general clinics and remote community outreach. Supervisor focus group evaluation was positive, with CPHN and FSM enhancing capacity of service. Student focus group evaluation revealed placements exceeded expectations, with rating high, and strong confidence in cultural competence described. Students debriefed final and third year cohorts on their experiences, with increased awareness and enthusiasm for work with indigenous communities indicated by groups. With the success of this partnership, placements are continuing 2013, and new boundaries in dietetic training established.

Using a smartphone application for customer-centric banking

The banking industry is under pressure. In order to compete, banks should adapt to concentrating on the specific customer needs, following an outside-in perspective. This paper presents the design of a business model for banks that considers this development by providing flexible and comprehensive support for retail banking clients. It is demonstrated that the identification of customer processes and the consequent alignment of banking services to those processes implies great potential to increase customer retention in banking. It will be shown that information technology – especially smartphones – can serve as an interface between customer and suppliers to enable an alignment of offerings to customer processes. This approach enables the integration of banks into their customers’ lifestyle, creating emotional value added, improving the personal relationship and the customers’ affiliation with the bank. The paper presents the design of such a customer-process-centric smartphone application and derives success factors for implementation.

Framework of a process laboratory for the operational control of service processes

Service processes such as financial advice, booking a business trip or conducting a consulting project have emerged as units of analysis of high interest for the business process and service management communities in practice and academia. While the transactional nature of production processes is relatively well understood and deployed, the less predictable and highly interactive nature of service processes still lacks in many areas appropriate methodological grounding. This paper proposes a framework of a process laboratory as a new IT artefact in order to facilitate the holistic analysis and simulation of such service processes. Using financial services as an example, it will be shown how such a process laboratory can be used to reduce the complexity of service process analysis and facilitate operational service process control.

Using Web 2.0 to improve software quality

Social media tools are starting to become mainstream and those working in the software development industry are often ahead of the game in terms of using current technological innovations to improve their work. With the advent of outsourcing and distributed teams the software industry is ideally placed to take advantage of social media technologies, tools and environments. This paper looks at how social media is being used by early adopters within the software development industry. Current tools and trends in social media tool use are described and critiqued: what works and what doesn't. We use industrial case studies from platform development, commercial application development and government contexts which provide a clear picture of the emergent state of the art. These real world experiences are then used to show how working collaboratively in geographically dispersed teams, enabled by social media, can enhance and improve the development experience.

Measuring Online user engagement : the limitations of Web analytics

The ability to identify and assess user engagement with transmedia productions is vital to the success of individual projects and the sustainability of this mode of media production as a whole. It is essential that industry players have access to tools and methodologies that offer the most complete and accurate picture of how audiences/users engage with their productions and which assets generate the most valuable returns of investment. Drawing upon research conducted with Hoodlum Entertainment, a Brisbane-based transmedia producer, this chapter outlines an initial assessment of the way engagement tends to be understood, why standard web analytics tools are ill-suited to measuring it, how a customised tool could offer solutions, and why this question of measuring engagement is so vital to the future of transmedia as a sustainable industry.

The effect of preferential sampling on sampling variance

We examine some variations of standard probability designs that preferentially sample sites based on how easy they are to access. Preferential sampling designs deliver unbiased estimates of mean and sampling variance and will ease the burden of data collection but at what cost to our design efficiency? Preferential sampling has the potential to either increase or decrease sampling variance depending on the application. We carry out a simulation study to gauge what effect it will have when sampling Soil Organic Carbon (SOC) values in a large agricultural region in south-eastern Australia. Preferential sampling in this region can reduce the distance to travel by up to 16%. Our study is based on a dataset of predicted SOC values produced from a datamining exercise. We consider three designs and two ways to determine ease of access. The overall conclusion is that sampling performance deteriorates as the strength of preferential sampling increases, due to the fact the regions of high SOC are harder to access. So our designs are inadvertently targeting regions of low SOC value. The good news, however, is that Generalised Random Tessellation Stratification (GRTS) sampling designs are not as badly affected as others and GRTS remains an efficient design compared to competitors.

The QUT innovation space : a trans-disciplinary learning environment for entrepreneurship education : final report

In the current climate of global economic volatility, there are increasing calls for training in enterprising skills and entrepreneurship to underpin the systemic innovation required for even medium-term business sustainability. The skills long-recognised as the essential for entrepreneurship now appear on the list of employability skills demanded by industry. The QUT Innovation Space (QIS) was an experiment aimed at delivering entrepreneurship education (EE), as an extra-curricular platform across the university, to the undergraduate students of an Australian higher education institute. It was an ambitious project that built on overseas models of EE studied during an Australian Learning and Teaching Council (ALTC) Teaching Fellowship (Collet, 2011) and implemented those approaches across an institute. Such EE approaches have not been attempted in an Australian university. The project tested resonance not only with the student population, from the perspective of what worked and what didn’t work, but also with every level of university operations. Such information is needed to inform the development of EE in the Australian university landscape. The QIS comprised a physical co-working space, virtual sites (web, Twitter and Facebook) and a network of entrepreneurial mentors, colleagues, and students. All facets of the QIS enabled connection between like-minded individuals that underpins the momentum needed for a project of this nature. The QIS became an innovation community within QUT. This report serves two purposes. First, as an account of the QIS project and its evolution, the report serves to identify the student demand for skills and training as well as barriers and facilitators of the activities that promote EE in an Australian university context. Second, the report serves as a how-to manual, in the tradition of many tomes on EE, outlining the QIS activities that worked as well as those that failed. The activities represent one measure of QIS outcomes and are described herein to facilitate implementation in other institutes. The QIS initially aimed to adopt an incubation model for training in EE. The ‘learning by doing’ model for new venture creation is a highly successful and high profile training approach commonly found in overseas contexts. However, the greatest demand of the QUT student population was not for incubation and progression of a developed entrepreneurial intent, but rather for training that instilled enterprising skills in the individual. These two scenarios require different training approaches (Fayolle and Gailly, 2008). The activities of the QIS evolved to meet that student demand. In addressing enterprising skills, the QIS developed the antecedents of entrepreneurialism (i.e., entrepreneurial attitudes, motivation and behaviours) including high-level skills around risk-taking, effective communication, opportunity recognition and action-orientation. In focusing on the would-be entrepreneur and not on the (initial) idea per se, the QIS also fostered entrepreneurial outcomes that would never have gained entry to the rigid stage-gated incubation model proposed for the original QIS framework. Important lessons learned from the project for development of an innovation community include the need to: 1. Evaluate the context of the type of EE program to be delivered and the student demand for the skills training (as noted above). 2. Create a community that builds on three dimensions: a physical space, a virtual environment and a network of mentors and partners. 3. Supplement the community with external partnerships that aid in delivery of skills training materials. 4. Ensure discovery of the community through the use of external IT services to deliver advertising and networking outlets. 5. Manage unrealistic student expectations of billion dollar products. 6. Continuously renew and rebuild simple activities to maintain student engagement. 7. Accommodate the non-university end-user group within the community. 8. Recognise and address the skills bottlenecks that serve as barriers to concept progression; in this case, externally provided IT and programming skills. 9. Use available on-line and published resources rather than engage in constructing project-specific resources that quickly become obsolete. 10. Avoid perceptions of faculty ownership and operate in an increasingly competitive environment. 11. Recognise that the continuum between creativity/innovation and entrepreneurship is complex, non-linear and requires different training regimes during the different phases of the pipeline. One small entity, such as the QIS, cannot address them all. The QIS successfully designed, implemented and delivered activities that included events, workshops, seminars and services to QUT students in the extra-curricular space. That the QIS project can be considered successful derives directly from the outcomes. First, the QIS project changed the lives of emerging QUT student entrepreneurs. Also, the QIS activities developed enterprising skills in students who did not necessarily have a business proposition, at the time. Second, successful outcomes of the QIS project are evidenced as the embedding of most, perhaps all, of the QIS activities in a new Chancellery-sponsored initiative: the Leadership Development and Innovation Program hosted by QUT Student Support Services. During the course of the QIS project, the Brisbane-based innovation ecosystem underwent substantial change. From a dearth of opportunities for the entrepreneurially inclined, there is now a plethora of entities that cater for a diversity of innovation-related activities. While the QIS evolved with the landscape, the demand endpoint of the QIS activities still highlights a gap in the local and national innovation ecosystems. The freedom to experiment and to fail is not catered for by the many new entities seeking to build viable businesses on the back of the innovation push. The onus of teaching the enterprising skills, which are the employability skills now demanded by industry, remains the domain of the higher education sector.

Social engineering in social networking sites : how good becomes evil

Social Engineering (ES) is now considered the great security threat to people and organizations. Ever since the existence of human beings, fraudulent and deceptive people have used social engineering tricks and tactics to trick victims into obeying them. There are a number of social engineering techniques that are used in information technology to compromise security defences and attack people or organizations such as phishing, identity theft, spamming, impersonation, and spaying. Recently, researchers have suggested that social networking sites (SNSs) are the most common source and best breeding grounds for exploiting the vulnerabilities of people and launching a variety of social engineering based attacks. However, the literature shows a lack of information about what types of social engineering threats exist on SNSs. This study is part of a project that attempts to predict a persons’ vulnerability to SE based on demographic factors. In this paper, we demonstrate the different types of social engineering based attacks that exist on SNSs, the purposes of these attacks, reasons why people fell (or did not fall) for these attacks, based on users’ opinions. A qualitative questionnaire-based survey was conducted to collect and analyse people’s experiences with social engineering tricks, deceptions, or attacks on SNSs.

Social engineering in social networking sites : the art of impersonation

Social networking sites (SNSs), with their large number of users and large information base, seem to be the perfect breeding ground for exploiting the vulnerabilities of people, who are considered the weakest link in security. Deceiving, persuading, or influencing people to provide information or to perform an action that will benefit the attacker is known as “social engineering.” Fraudulent and deceptive people use social engineering traps and tactics through SNSs to trick users into obeying them, accepting threats, and falling victim to various crimes such as phishing, sexual abuse, financial abuse, identity theft, and physical crime. Although organizations, researchers, and practitioners recognize the serious risks of social engineering, there is a severe lack of understanding and control of such threats. This may be partly due to the complexity of human behaviors in approaching, accepting, and failing to recognize social engineering tricks. This research aims to investigate the impact of source characteristics on users’ susceptibility to social engineering victimization in SNSs, particularly Facebook. Using grounded theory method, we develop a model that explains what and how source characteristics influence Facebook users to judge the attacker as credible.