Comparison of the gate drive parameter space for driving power MOSFETs using conventional and cascode configurations

Conventional voltage driven gate drive circuits utilise a resistor to control the switching speed of power MOS-FETs. The gate resistance is adjusted to provide controlled rate of change of load current and voltage. The cascode gate drive configuration has been proposed as an alternative to the conventional resistor-fed gate drive circuit. While cascode drive is broadly understood in the literature the switching characteristics of this topology are not well documented. This paper explores, through both simulation and experimentation, the gate drive parameter space of the cascode gate drive configuration and provides a comparison to the switching characteristics of conventional gate drive.

Making climate change manageable : how accounting constructs new power-knowledge regimes

This paper examines the modern power of accounting to permeate new spheres and create new objects by examining how climate change becomes a new category for accounting’s attention. It outlines the socio-political problem space where accounting and climate change connect by tracing the emergence of the UK’s Climate Change Act (2008) to a specifically modern calculating attitude described here as ‘managing by the numbers’. It suggests the intersection of accounting and climate change was made possible by accounting’s role in tying disciplinary subjectivities and objectivities together whilst operating simultaneously at the level of individuals, organisations and government. Such that when faced with new unknowns we revert to previous ways of managing we have come to know and experienced throughout our formative years in schools, hospitals, firms and government departments. In this way, accounting’s emergence in the domain of managing climate change implies a transformation that cannot be explained merely as a practical response to a global warming problem, but rather as an example of a new power-knowledge regime that makes possible the management and control of a new organisational phenomenon called climate change.

A hybrid maximum power point tracking for partially shaded photovoltaic systems in the tropics

Partial shading and rapidly changing irradiance conditions significantly impact on the performance of photovoltaic (PV) systems. These impacts are particularly severe in tropical regions where the climatic conditions result in very large and rapid changes in irradiance. In this paper, a hybrid maximum power point (MPP) tracking (MPPT) technique for PV systems operating under partially shaded conditions witapid irradiance change is proposed. It combines a conventional MPPT and an artificial neural network (ANN)-based MPPT. A low cost method is proposed to predict the global MPP region when expensive irradiance sensors are not available or are not justifiable for cost reasons. It samples the operating point on the stairs of I–V curve and uses a combination of the measured current value at each stair to predict the global MPP region. The conventional MPPT is then used to search within the classified region to get the global MPP. The effectiveness of the proposed MPPT is demonstrated using both simulations and an experimental setup. Experimental comparisons with four existing MPPTs are performed. The results show that the proposed MPPT produces more energy than the other techniques and can effectively track the global MPP with a fast tracking speed under various shading patterns.

Probabilistic power system contingency analysis considering wind

This thesis was a step forward in developing probabilistic assessment of power system response to faults subject to intermittent generation by renewable energy. It has investigated the wind power fluctuation effect on power system stability, and the developed fast estimation process has demonstrated the feasibility for real-time implementation. A better balance between power network security and efficiency can be achieved based on this research outcome.

Health communication: A pilot study comparing perceptions of women with and without high functioning autism spectrum disorder

Research indicates significant health disparities for individuals with autism. Insight into characteristic sensory, cognitive, communication, social, emotional, and behavioural challenges that may influence health communication for patients with autism is vital to address potential disparities. Women with high functioning autism spectrum disorder (ASD) may have specific healthcare needs, and are likely to independently represent themselves and others in healthcare. A pilot study compared perceptions of healthcare experiences for women with and without ASD using on-line survey based on characteristics of ASD likely to influence healthcare. Fifty-eight adult female participants (32 with ASD diagnosis, 26 without ASD diagnosis) were recruited on-line from autism support organisations. Perceptions measured included self-reporting of pain and symptoms, healthcare seeking behaviours, the influence of emotional distress, sensory and social anxiety, maternity experiences, and the influence of autistic status disclosure. Results partially support the hypothesis that ASD women experience greater healthcare challenges. Women with ASD reported greater challenges in healthcare anxiety, communication under emotional distress, anxiety relating to waiting rooms, support during pregnancy, and communication during childbirth. Self-disclosure of diagnostic status and lack of ASD awareness by healthcare providers rated as highly problematic. Results offer detailed insight into healthcare communication and disparities for women with ASD.

Battery energy storage systems to improve power system frequency response

Battery energy storage systems (BESS) are becoming feasible to provide system frequency support due to recent developments in technologies and plummeting cost. Adequate response of these devices becomes critical as the penetration of the renewable energy sources increases in the power system. This paper proposes effective use of BESS to improve system frequency performance. The optimal capacity and the operation scheme of BESS for frequency regulation are obtained using two staged optimization process. Furthermore, the effectiveness of BESS for improving the system frequency response is verified using dynamic simulations.

Wireless Power Transfer (WPT) for electric vehicles (EVs) - present and future trends

100 year old gasoline engine technology vehicles have now become one of the major contributors of greenhouse gases. Plug-in Electric Vehicles (PEVs) have been proposed to achieve environmental friendly transportation. Even though the PEV usage is currently increasing, a technology breakthrough would be required to overcome battery related drawbacks. Although battery technology is evolving, drawbacks inherited with batteries such as; cost, size, weight, slower charging characteristic and low energy density would still be dominating constrains for development of EVs. Furthermore, PEVs have not been accepted as preferred choice by many consumers due to charging related issues. To address battery related limitations, the concept of dynamic Wireless Power Transfer (WPT) enabled EVs have been proposed in which EV is being charged while it is in motion. WPT enabled infrastructure has to be employed to achieve dynamic EV charging concept. The weight of the battery pack can be reduced as the required energy storage is lower if the vehicle can be powered wirelessly while driving. Stationary WPT charging where EV is charged wirelessly when it is stopped, is simpler than dynamic WPT in terms of design complexity. However, stationary WPT does not increase vehicle range compared to wired-PEVs. State-of-art WPT technology for future transportation is discussed in this chapter. Analysis of the WPT system and its performance indices are introduced. Modelling the WPT system using different methods such as equivalent circuit theory, two port network theory and coupled mode theory is described illustrating their own merits in Sect. 2.3. Both stationary and dynamic WPT for EV applications are illustrated in Sect. 2.4. Design challenges and optimization directions are analysed in Sect. 2.5. Adaptive tuning techniques such as adaptive impedance matching and frequency tuning are also discussed. A case study for optimizing resonator design is presented in Sect. 2.6. Achievements by the research community is introduced highlighting directions for future research.

An efficiency optimization scheme for bidirectional inductive power transfer systems

Unidirectional inductive power transfer (UIPT) systems allow loads to consume power while bidirectional IPT (BIPT) systems are more suitable for loads requiring two way power flow such as vehicle to grid (V2G) applications with electric vehicles (EVs). Many attempts have been made to improve the performance of BIPT systems. In a typical BIPT system, the output power is control using the pickup converter phase shift angle (PSA) while the primary converter regulates the input current. This paper proposes an optimized phase shift modulation strategy to minimize the coil losses of a series – series (SS) compensated BIPT system. In addition, a comprehensive study on the impact of power converters on the overall efficiency of the system is also presented. A closed loop controller is proposed to optimize the overall efficiency of the BIPT system. Theoretical results are presented in comparison to both simulations and measurements of a 0.5 kW prototype to show the benefits of the proposed concept. Results convincingly demonstrate the applicability of the proposed system offering high efficiency over a wide range of output power.

Stability synthesis of power hardware-in-the-loop (PHIL) simulation

A virtual power system can be interfaced with a physical system to form a power hardware-in-the-loop (PHIL) simulation. In this scheme, the virtual system can be simulated in a fast parallel processor to provide near real-time outputs, which then can be interfaced to a physical hardware that is called the hardware under test (HuT). Stable operation of the entire system, while maintaining acceptable accuracy, is the main challenge of a PHIL simulation. In this paper, after an extended stability analysis for voltage and current type interfaces, some guidelines are provided to have a stable PHIL simulation. The presented analysis have been evaluated by performing several experimental tests using a Real Time Digital Simulator (RTDS™) and a voltage source converter (VSC). The practical test results are consistent with the proposed analysis.

Student perceptions: Improving the educational experiences of high school students on the autism spectrum

Listening to and reflecting on the voices and personal stories of adolescent students with an autism spectrum disorder (ASD) is critically important to developing more inclusive approaches to their education. This article considers the experiences of nine adolescents with an ASD on their inclusive education in a large urban secondary school in Australia. These educational experiences were mapped onto four themes emanating from a similar study by Humphrey and Lewis from the United Kingdom. The results from both studies suggest that although students with ASD are having positive and enabling educational experiences, a number of common inhibitors continue to prevent them from taking full advantage of their schooling. By listening to the voices of students with ASD, specific enablers and inhibitors to promoting successful educational experiences are identified, and recommendations for practice are put forward to better support the education not only of students with ASD but all students.

The spectrum of HIV-1 related cancers in South Africa

Despite the high prevalence of infection by the Human Immunodeficiency Virus (HIV) in South Africa, information on its association with cancer is sparse. Our study was carried out to examine the relationship between HIV and a number of cancer types or sites that are common in South Africa. A total of 4,883 subjects, presenting with a cancer or cardiovascular disease at the 3 tertiary referral hospitals in Johannesburg, were interviewed and had blood tested for HIV. Odds ratios associated with HIV infection were calculated by using unconditional logistic regression models for 16 major cancer types where data was available for 50 or more patients. In the comparison group, the prevalence of HIV infection was 8.3% in males and 9.1% in females. Significant excess risks associated with HIV infection were found for Kaposi's sarcoma (OR=21.9, 95% CI=12.5–38.6), non-Hodgkin lymphoma (OR=5.0, 95%CI=2.7–9.5), vulval cancer (OR=4.8, 95%CI=1.9–12.2) and cervical cancer (OR=1.6, 95%CI=1.1–2.3) but not for any of the other major cancer types examined, including Hodgkin disease, multiple myeloma and lung cancer. In Johannesburg, South Africa, HIV infection was associated with significantly increased risks of Kaposi's sarcoma, non-Hodgkin lymphoma and cancers of the cervix and the vulva. The relative risks for Kaposi's sarcoma and non-Hodgkin lymphoma associated with HIV infection were substantially lower than those found in the West.