The STRATIFY tool and clinical judgment were poor predictors of falling in an acute hospital setting

Objective: To compare the effectiveness of the STRATIFY falls tool with nurses’ clinical judgments in predicting patient falls. Study Design and Setting: A prospective cohort study was conducted among the inpatients of an acute tertiary hospital. Participants were patients over 65 years of age admitted to any hospital unit. Sensitivity, specificity, and positive predictive value (PPV) and negative predictive values (NPV) of the instrument and nurses’ clinical judgments in predicting falls were calculated. Results: Seven hundred and eighty-eight patients were screened and followed up during the study period. The fall prevalence was 9.2%. Of the 335 patients classified as being ‘‘at risk’’ for falling using the STRATIFY tool, 59 (17.6%) did sustain a fall (sensitivity50.82, specificity50.61, PPV50.18, NPV50.97). Nurses judged that 501 patients were at risk of falling and, of these, 60 (12.0%) fell (sensitivity50.84, specificity50.38, PPV50.12, NPV50.96). The STRATIFY tool correctly identified significantly more patients as either fallers or nonfallers than the nurses (P50.027). Conclusion: Considering the poor specificity and high rates of false-positive results for both the STRATIFY tool and nurses’ clinical judgments, we conclude that neither of these approaches are useful for screening of falls in acute hospital settings.

The use of online counselling within an Australian secondary school setting: a practitioner’s viewpoint

This paper proposes that the provision of online counselling services for young people accessed through their local school website has the potential to assist students with mental health issues as well as increasing their help seeking behaviours. It stems from the work of the authors who trialled an online counselling service within one Australian secondary school. In Australia, online counselling with the adult population is now an accepted part of the provision of mental health services. Online provision of mental health information for young people is also well accepted. However, online counselling for young people is provided by only a few community organisations such as Kids Help Line within Australia. School based counselling services which are integral to most secondary schools in Australia, seem slow to provide this service in spite of initial interest and enthusiasm by individual school counsellors. This discussion is the product of reflection on the potential benefits of this trial with a consideration of relevant research of the issues raised. It highlights the need for further research into the use of computer mediated communication in the provision of counselling within a school setting.

Nurse-determined assessment of cardiac output. Comparing a non-invasive cardiac output device and pulmonary artery catheter: a prospective observational study.

Background The accurate measurement of Cardiac output (CO) is vital in guiding the treatment of critically ill patients. Invasive or minimally invasive measurement of CO is not without inherent risks to the patient. Skilled Intensive Care Unit (ICU) nursing staff are in an ideal position to assess changes in CO following therapeutic measures. The USCOM (Ultrasonic Cardiac Output Monitor) device is a non-invasive CO monitor whose clinical utility and ease of use requires testing. Objectives To compare cardiac output measurement using a non-invasive ultrasonic device (USCOM) operated by a non-echocardiograhically trained ICU Registered Nurse (RN), with the conventional pulmonary artery catheter (PAC) using both thermodilution and Fick methods. Design Prospective observational study. Setting and participants Between April 2006 and March 2007, we evaluated 30 spontaneously breathing patients requiring PAC for assessment of heart failure and/or pulmonary hypertension at a tertiary level cardiothoracic hospital. Methods SCOM CO was compared with thermodilution measurements via PAC and CO estimated using a modified Fick equation. This catheter was inserted by a medical officer, and all USCOM measurements by a senior ICU nurse. Mean values, bias and precision, and mean percentage difference between measures were determined to compare methods. The Intra-Class Correlation statistic was also used to assess agreement. The USCOM time to measure was recorded to assess the learning curve for USCOM use performed by an ICU RN and a line of best fit demonstrated to describe the operator learning curve. Results In 24 of 30 (80%) patients studied, CO measures were obtained. In 6 of 30 (20%) patients, an adequate USCOM signal was not achieved. The mean difference (±standard deviation) between USCOM and PAC, USCOM and Fick, and Fick and PAC CO were small, −0.34 ± 0.52 L/min, −0.33 ± 0.90 L/min and −0.25 ± 0.63 L/min respectively across a range of outputs from 2.6 L/min to 7.2 L/min. The percent limits of agreement (LOA) for all measures were −34.6% to 17.8% for USCOM and PAC, −49.8% to 34.1% for USCOM and Fick and −36.4% to 23.7% for PAC and Fick. Signal acquisition time reduced on average by 0.6 min per measure to less than 10 min at the end of the study. Conclusions In 80% of our cohort, USCOM, PAC and Fick measures of CO all showed clinically acceptable agreement and the learning curve for operation of the non-invasive USCOM device by an ICU RN was found to be satisfactorily short. Further work is required in patients receiving positive pressure ventilation.

The S.T.A.B. Trial - Standardised Testing of Artificial Blood. A comparative study of various products that may be used as artificial blood for high fidelity simulation training in the critical care setting

Aim: In the current climate of medical education, there is an ever-increasing demand for and emphasis on simulation as both a teaching and training tool. The objective of our study was to compare the realism and practicality of a number of artificial blood products that could be used for high-fidelity simulation. Method: A literature and internet search was performed and 15 artificial blood products were identified from a variety of sources. One product was excluded due to its potential toxicity risks. Five observers, blinded to the products, performed two assessments on each product using an evaluation tool with 14 predefined criteria including color, consistency, clotting, and staining potential to manikin skin and clothing. Each criterion was rated using a five-point Likert scale. The products were left for 24 hours, both refrigerated and at room temperature, and then reassessed. Statistical analysis was performed to identify the most suitable products, and both inter- and intra-rater variability were examined. Results: Three products scored consistently well with all five assessors, with one product in particular scoring well in almost every criterion. This highest-rated product had a mean rating of 3.6 of 5.0 (95% posterior Interval 3.4-3.7). Inter-rater variability was minor with average ratings varying from 3.0 to 3.4 between the highest and lowest scorer. Intrarater variability was negligible with good agreement between first and second rating as per weighted kappa scores (K = 0.67). Conclusion: The most realistic and practical form of artificial blood identified was a commercial product called KD151 Flowing Blood Syrup. It was found to be not only realistic in appearance but practical in terms of storage and stain removal.

Open Specification for BIM : Sydney Opera House Case Study

Executive Summary The objective of this report was to use the Sydney Opera House as a case study of the application of Building Information Modelling (BIM). The Sydney opera House is a complex, large building with very irregular building configuration, that makes it a challenging test. A number of key concerns are evident at SOH: • the building structure is complex, and building service systems - already the major cost of ongoing maintenance - are undergoing technology change, with new computer based services becoming increasingly important. • the current “documentation” of the facility is comprised of several independent systems, some overlapping and is inadequate to service current and future services required • the building has reached a milestone age in terms of the condition and maintainability of key public areas and service systems, functionality of spaces and longer term strategic management. • many business functions such as space or event management require up-to-date information of the facility that are currently inadequately delivered, expensive and time consuming to update and deliver to customers. • major building upgrades are being planned that will put considerable strain on existing Facilities Portfolio services, and their capacity to manage them effectively While some of these concerns are unique to the House, many will be common to larger commercial and institutional portfolios. The work described here supported a complementary task which sought to identify if a building information model – an integrated building database – could be created, that would support asset & facility management functions (see Sydney Opera House – FM Exemplar Project, Report Number: 2005-001-C-4 Building Information Modelling for FM at Sydney Opera House), a business strategy that has been well demonstrated. The development of the BIMSS - Open Specification for BIM has been surprisingly straightforward. The lack of technical difficulties in converting the House’s existing conventions and standards to the new model based environment can be related to three key factors: • SOH Facilities Portfolio – the internal group responsible for asset and facility management - have already well established building and documentation policies in place. The setting and adherence to well thought out operational standards has been based on the need to create an environment that is understood by all users and that addresses the major business needs of the House. • The second factor is the nature of the IFC Model Specification used to define the BIM protocol. The IFC standard is based on building practice and nomenclature, widely used in the construction industries across the globe. For example the nomenclature of building parts – eg ifcWall, corresponds to our normal terminology, but extends the traditional drawing environment currently used for design and documentation. This demonstrates that the international IFC model accurately represents local practice for building data representation and management. • a BIM environment sets up opportunities for innovative processes that can exploit the rich data in the model and improve services and functions for the House: for example several high-level processes have been identified that could benefit from standardized Building Information Models such as maintenance processes using engineering data, business processes using scheduling, venue access, security data and benchmarking processes using building performance data. The new technology matches business needs for current and new services. The adoption of IFC compliant applications opens the way forward for shared building model collaboration and new processes, a significant new focus of the BIM standards. In summary, SOH current building standards have been successfully drafted for a BIM environment and are confidently expected to be fully developed when BIM is adopted operationally by SOH. These BIM standards and their application to the Opera House are intended as a template for other organisations to adopt for the own procurement and facility management activities. Appendices provide an overview of the IFC Integrated Object Model and an understanding IFC Model Data.

Discussion Paper : Proposed CDIO Standard 13 - Internationalisation and Mobility

The benefits and growing need for international transparency in engineering qualifications, simple cross-credit processes, international dual awards and mechanisms to encourage student mobility, are receiving much attention around the world at present. In response, there are a number of global initiatives now looking at how these issues may be addressed, particularly in Europe, North America and Australia. CDIO has adopted 12 Standards as guiding principles for program reform and evaluation. The 12 CDIO Standards address program philosophy curriculum development, design-build experiences and workspaces, new methods of teaching and learning, faculty/academic development, and assessment and evaluation. However, none of the Standards address international qualifications nor student mobility. This discussion paper presents the underpinning case for introducing the 13th CDIO Standard, Internationalization and Mobility.

Identifying influences of driving behaviour : could the Australian work driving setting be unique?

Work-related driving safety is an emerging concern for Australian and overseas organisations. An in depth investigation was undertaken into a group of fleet drivers’ attitudes regarding what personal and environment factors have the greatest impact upon driving behaviours. A number of new and unique factors not previously identified were found including: vehicle features, vehicle ownership, road conditions, weather, etc. The major findings of the study are discussed in regards to practical solutions to improve fleet safety.

The new world of work and employment: fitness workers and what they want from the employment relationship

This paper reports on an empirically based study of the Queensland (Australia) health and fitness industry over 15 years (1993 -2008). This study traces the development of the new occupation of fitness instructor in a service industry which has evolved si nce the 1980s and is embedded in values of consumption and individualism. It is the new world of work. The data from the 1993 study was historically significant, capturing the conditions o f employment in an unregulated setting prior to the introduction of the first industrial a ward in that industry in 1994. Fitness workers bargained directly with employers over all a spects of the employment relationship without the constraints of industrial regulation or the presence of trade unions. The substantive outcomes of the employment relationship were a direct reflection of m anagerial prerogative and worker orientation and preference, and did not reflect the rewards and outcomes traditionally found in Australian workplaces. While the focus of the 1993 research was on exploring the employment relationship in a deregulated environment, an unusual phenomenon was identified: fitness workers happily trading-off what would be considere d standard working conditions for the opportunity to work (‘take the stage’). Since then, several streams of literature have evolved providing a new context for understanding this phenomenon in the fitness industry, including: the sociology of the body (Shilling 1993; Turner 1996); emotional (Hochschild 1984) and aesthetic labour (Warhurst et al 2000); the so cial relations of production and space (Lefebvre 1991; Moss 1995); body history (Helps 2007); the sociology of consumption (Saunders 1988; Baudrillard 1998; Ritzer 2004); and work identity (Du Gay 1996; Strangleman 2004). The 2008 survey instrument replicated the 1993 study but was additionally informed b y the new literature. Surveys were sent to 310 commercial fitness centres and 4,800 fitness workers across Queensland. Worker orientation appears unchanged, and industry working conditions still seem atypical despite regulation si nce 1994. We argue that for many fitness workers the goal is to gain access to the fitness centre economy. For this they are willing to trade-off standard conditions of employment, and exchange traditional employm ent rewards for m ore intrinsic psycho-social rewards gained the through e xp o sure of their physical capital (Bourdieu 1984) o r bo dily prowess to the adoration o f their gazing clients. Building on the tradition of emotional labour and aesthetic labour, this study introduces the concept of ocularcentric labour: a state in which labour’s quest for the psychosocial rewards gained from their own body image shapes the employment relationship. With ocularcentric labour the p sycho-social rewards have greater value for the worker than ‘hard’, core conditions of employment, and are a significant factor in bargaining and outcomes, often substituting fo r direct earnings. The wo rkforce profile (young, female, casual) and their expectations (psycho-social rewards of ado ration and celebrity) challenge traditional trade unions in terms of what they can deliver, given the fitness workers’ willingness to trade-off minimum conditions, hard-won by unions.

Setting limits to teacher responsibility

The purpose of this article is to raise some concerns over ongoing changes to the nature and scope of the teaching profession. Teaching is a responsible profession, and teachers have always been charged with the job of turning out the next generation of citizens—educated, healthy in mind, and healthy in body. The question is: how far should this responsibility extend? Just what should schools be responsible for? This article proposes some limits to teacher responsibility.

Contemporary behavioural influences in an organisational setting and implications for intervention development

Professional drivers and safety Within the industrialised world, work-related crashes are the most common cause of work-related death, injury and reduced productivity (Charbotel et al., 2001; Toscano and Windau, 1994). Likewise in Australia, road crashes are the most common cause of work-related fatalities, injuries and absence from work (Haworth et al., 2000), with the average time lost being greater than any other workplace claim (Stewart-Bogle, 1999). There are obvious costs related to work crashes such as vehicle and property repair costs. There are also many hidden expenses including third party costs, workers compensation, medical costs, rehabilitation, customer-related costs, increased insurance premiums, administrative costs, legal fees and loss of productivity (Collingwood, 1997; Haworth et al, 2000).

A grounded theory study of nursing students’ experiences in the off-campus clinical setting

Poor workplace relations are an issue of concern in many workplaces and this phenomenon is not restricted to the nursing profession. The issue of workplace violence in nursing is well documented and there are an increasing number of studies which have investigated the notion of horizontal violence amongst graduate nurses. The impact that poor workplace relations has on the development of a professional identity by nursing students in the off-campus clinical setting is significant in light of the current global shortage of nurses. There is a dearth of knowledge in understanding how Australian undergraduate nursing students experience the off-campus clinical setting and subsequently develop a professional identity as a nurse. Therefore the aim of this study was to discover and describe the phenomena in order to develop a substantive theory that explains the experiences of the undergraduate nursing students in a regional setting. Constructivist grounded theory methods were utilised in the conduct of the study. A sample of 29 participants was recruited permitting the formulation of a substantive theory regarding the development of a professional identity in nursing students. This substantive theory contributes knowledge relevant to the undergraduate nursing students, nurse educators, nursing workforce planners, and the tertiary educational institutions offering nursing. This is achieved through discovering, describing and explaining the phenomenon of ‘anxiety’ which the nursing students experience as a result of the interrelationship and interactions of tradition bearing, staff and student performance. These interactions intersect to form expectations of where the student fits within the hierarchy of the facility and the nursing profession in general. An understanding of the issues associated with tradition bearing, staff performance, and student performance and the impact that the interaction of these conditions has upon the student’s developing professional identity as a nurse is necessary to allow for the implementation of corrective strategies.

Enhancing the standard operating range of a placido disk videokeratoscope for corneal surface estimation

Abstract—Corneal topography estimation that is based on the Placido disk principle relies on good quality of precorneal tear film and sufficiently wide eyelid (palpebral) aperture to avoid reflections from eyelashes. However, in practice, these conditions are not always fulfilled resulting in missing regions, smaller corneal coverage, and subsequently poorer estimates of corneal topography. Our aim was to enhance the standard operating range of a Placido disk videokeratoscope to obtain reliable corneal topography estimates in patients with poor tear film quality, such as encountered in those diagnosed with dry eye, and with narrower palpebral apertures as in the case of Asian subjects. This was achieved by incorporating in the instrument’s own topography estimation algorithm an image processing technique that comprises a polar-domain adaptive filter and amorphological closing operator. The experimental results from measurements of test surfaces and real corneas showed that the incorporation of the proposed technique results in better estimates of corneal topography, and, in many cases, to a significant increase in the estimated coverage area making such an enhanced videokeratoscope a better tool for clinicians.

National guidelines for digital modelling

These National Guidelines and Case Studies for Digital Modelling are the outcomes from one of a number of Building Information Modelling (BIM)-related projects undertaken by the CRC for Construction Innovation. Since the CRC opened its doors in 2001, the industry has seen a rapid increase in interest in BIM, and widening adoption. These guidelines and case studies are thus very timely, as the industry moves to model-based working and starts to share models in a new context called integrated practice. Governments, both federal and state, and in New Zealand are starting to outline the role they might take, so that in contrast to the adoption of 2D CAD in the early 90s, we ensure that a national, industry-wide benefit results from this new paradigm of working. Section 1 of the guidelines give us an overview of BIM: how it affects our current mode of working, what we need to do to move to fully collaborative model-based facility development. The role of open standards such as IFC is described as a mechanism to support new processes, and make the extensive design and construction information available to asset operators and managers. Digital collaboration modes, types of models, levels of detail, object properties and model management complete this section. It will be relevant for owners, managers and project leaders as well as direct users of BIM. Section 2 provides recommendations and guides for key areas of model creation and development, and the move to simulation and performance measurement. These are the more practical parts of the guidelines developed for design professionals, BIM managers, technical staff and ‘in the field’ workers. The guidelines are supported by six case studies including a summary of lessons learnt about implementing BIM in Australian building projects. A key aspect of these publications is the identification of a number of important industry actions: the need for BIM-compatible product information and a national context for classifying product data; the need for an industry agreement and setting process-for-process definition; and finally, the need to ensure a national standard for sharing data between all of the participants in the facility-development process.

National guidelines for digital modelling : case studies

These National Guidelines and Case Studies for Digital Modelling are the outcomes from one of a number of Building Information Modelling (BIM)-related projects undertaken by the CRC for Construction Innovation. Since the CRC opened its doors in 2001, the industry has seen a rapid increase in interest in BIM, and widening adoption. These guidelines and case studies are thus very timely, as the industry moves to model-based working and starts to share models in a new context called integrated practice. Governments, both federal and state, and in New Zealand are starting to outline the role they might take, so that in contrast to the adoption of 2D CAD in the early 90s, we ensure that a national, industry-wide benefit results from this new paradigm of working. Section 1 of the guidelines give us an overview of BIM: how it affects our current mode of working, what we need to do to move to fully collaborative model-based facility development. The role of open standards such as IFC is described as a mechanism to support new processes, and make the extensive design and construction information available to asset operators and managers. Digital collaboration modes, types of models, levels of detail, object properties and model management complete this section. It will be relevant for owners, managers and project leaders as well as direct users of BIM. Section 2 provides recommendations and guides for key areas of model creation and development, and the move to simulation and performance measurement. These are the more practical parts of the guidelines developed for design professionals, BIM managers, technical staff and ‘in the field’ workers. The guidelines are supported by six case studies including a summary of lessons learnt about implementing BIM in Australian building projects. A key aspect of these publications is the identification of a number of important industry actions: the need for BIMcompatible product information and a national context for classifying product data; the need for an industry agreement and setting process-for-process definition; and finally, the need to ensure a national standard for sharing data between all of the participants in the facility-development process.