Perceptions of visibility and conspicuity of biomotion clothing configurations for road workers at road work sites

Aims: This study determined whether the visibility benefits of positioning retroreflective strips in biological motion configurations were evident at real world road worker sites. Methods: 20 visually normal drivers (M=40.3 years) participated in this study that was conducted at two road work sites (one suburban and one freeway) on two separate nights. At each site, four road workers walked in place wearing one of four different clothing options: a) standard road worker night vest, b) standard night vest plus retroreflective strips on thighs, c) standard night vest plus retroreflective strips on ankles and knees, d) standard night vest plus retroreflective strips on eight moveable joints (full biomotion). Participants seated in stationary vehicles at three different distances (80m, 160m, 240m) rated the relative conspicuity of the four road workers using a series of a standardized visibility and ranking scales. Results: Adding retroreflective strips in the full biomotion configuration to the standard night vest significantly (p<0.001) enhanced perceptions of road worker visibility compared to the standard vest alone, or in combination with thigh retroreflective markings. These visibility benefits were evident at all distances and at both sites. Retroreflective markings at the ankles and knees also provided visibility benefits compared to the standard vest, however, the full biomotion configuration was significantly better than all of the other configurations. Conclusions: These data provide the first evidence that the benefits of biomotion retroreflective markings that have been previously demonstrated under laboratory and closed- and open-road conditions are also evident at real work sites.

The case for ICT work-integrated learning from graduates in the workplace

An online survey of recent ICT graduates in the workplace was carried out as part of a recent project funded by the Australian Learning and Teaching Council. The survey was concerned with the ICT curriculum in relation to workplace job requirements and university preparation for these requirements. The survey contained quantitative and qualitative components and findings from the former have been published (Koppi et al., 2009). This paper reports on a quantitative comparison of responses from graduates who had workplace experience and those who did not, and a qualitative analysis of text responses from all ICT graduates to open-ended questions concerning the curriculum and their perceived university preparation for the workplace. The overwhelming response from ICT graduates in the workplace was for more industry related learning. These industry relationships included industry involvement, workplace learning and business experience, up-to-date teaching and technologies, practical applications, and real-world activities. A closer relationship of academia and industry was strongly advocated by ICT graduates in the workplace.

How do the learning outcomes of students compare in units with different levels of practical work? A comparative study about the relation between Problem-­Based Learning and assessment approaches

The literature supporting the notion that active, student-centered learning is superior to passive, teacher-centered instruction is encyclopedic (Bonwell & Eison, 1991; Bruning, Schraw, & Ronning, 1999; Haile, 1997a, 1997b, 1998; Johnson, Johnson, & Smith, 1999). Previous action research demonstrated that introducing a learning activity in class improved the learning outcomes of students (Mejias, 2010). People acquire knowledge and skills through practice and reflection, not by watching and listening to others telling them how to do something. In this context, this project aims to find more insights about the level of interactivity in the curriculum a class should have and its alignment with assessment so the intended learning outcomes (ILOs) are achieved. In this project, interactivity is implemented in the form of problem- based learning (PBL). I present the argument that a more continuous formative feedback when implemented with the correct amount of PBL stimulates student engagement bringing enormous benefits to student learning. Different levels of practical work (PBL) were implemented together with two different assessment approaches in two subjects. The outcomes were measured using qualitative and quantitative data to evaluate the levels of student engagement and satisfaction in the terms of ILOs.

3D anthropometry : from the ergonomist's perspective

Since the availability of 3D full body scanners and the associated software systems for operations with large point clouds, 3D anthropometry has been marketed as a breakthrough and milestone in ergonomic design. The assumptions made by the representatives of the 3D paradigm need to be critically reviewed though. 3D anthropometry has advantages as well as shortfalls, which need to be carefully considered. While it is apparent that the measurement of a full body point cloud allows for easier storage of raw data and improves quality control, the difficulties in calculation of standardized measurements from the point cloud are widely underestimated. Early studies that made use of 3D point clouds to derive anthropometric dimensions have shown unacceptable deviations from the standardized results measured manually. While 3D human point clouds provide a valuable tool to replicate specific single persons for further virtual studies, or personalize garment, their use in ergonomic design must be critically assessed. Ergonomic, volumetric problems are defined by their 2-dimensional boundary or one dimensional sections. A 1D/2D approach is therefore sufficient to solve an ergonomic design problem. As a consequence, all modern 3D human manikins are defined by the underlying anthropometric girths (2D) and lengths/widths (1D), which can be measured efficiently using manual techniques. Traditionally, Ergonomists have taken a statistical approach to design for generalized percentiles of the population rather than for a single user. The underlying method is based on the distribution function of meaningful single and two-dimensional anthropometric variables. Compared to these variables, the distribution of human volume has no ergonomic relevance. On the other hand, if volume is to be seen as a two-dimensional integral or distribution function of length and girth, the calculation of combined percentiles – a common ergonomic requirement - is undefined. Consequently, we suggest to critically review the cost and use of 3D anthropometry. We also recommend making proper use of widely available single and 2-dimensional anthropometric data in ergonomic design.

Design for manufacturing : a review and case study

Design for Manufacturing (DFM) is a highly integral methodology in product development, starting from the concept development phase, with the aim of improving manufacturing productivity. It is used to reduce manufacturing costs in complex production environments, while maintaining product quality. While Design for Assembly (DFA) is focusing on elimination or combination of parts with other components, which in most cases relates to performing a function and manufacture operation in a simpler way, DFM is following a more holistic approach. Common consideration for DFM are standard components, manufacturing tool inventory and capability, materials compatibility with production process, part handling, logistics, tool wear and process optimization, quality control complexity or Poka-Yoke design. During DFM, the considerable background work required for the conceptual phase is compensated for by a shortening of later development phases. Current DFM projects normally apply an iterative step-by-step approach and eventually transfer to the developer team. The study is introducing a new, knowledge based approach to DFM, eliminating steps of DFM, and showing implications on the work process. Furthermore, a concurrent engineering process via transparent interface between the manufacturing engineering and product development systems is brought forward.

Improved design rules for hollow flange sections subject to lateral distortional buckling

The LiteSteel Beam (LSB) is a new hollow flange section with a unique geometry consisting of torsionally rigid rectangular hollow flanges and a relatively slender web. It is subjected to lateral distortional buckling when used as flexural members, which reduces its member moment capacity. An investigation into the flexural behaviour of LSBs using experiments and numerical analyses led to the development of new design rules for LSBs subject to lateral distortional buckling. However, the comparison of moment capacity results with the new design rules showed that they were conservative for some LSB sections while slightly unconservative for others due to the effects of section geometry. It is also unknown whether these design rules are applicable to other hollow flange sections such as hollow flange beams (HFB). This paper presents the details of a study into the lateral distortional buckling behaviour of hollow flange sections such as LSBs, HFBs and their variations. A geometrical parameter defined as the ratio of flange torsional rigidity to the major axis flexural rigidity of the web (GJf/EIxweb) was found to be a critical parameter in evaluating the lateral distortional buckling behaviour and moment capacities of hollow flange sections. New design rules were therefore developed by using a member slenderness parameter modified by K, where K is a function of GJf/EIxweb. The new design rules based on the modified slenderness parameter were found to be accurate in calculating the moment capacities of not only LSBs and HFBs, but also other types of hollow flange sections.

Genetic evidence for the vital function of osterix in cementogenesis

To date, attempts to regenerate a complete tooth, including the critical periodontal tissues associated with the tooth root, have not been successful. Controversy still exists regarding the origin of the cell source for cellular cementum (epithelial or mesenchymal). This disagreement may be partially due to a lack of understanding of the events leading to the initiation and development of the tooth roots and supportive tissues, such as the cementum. Osterix (OSX) is a transcriptional factor essential for osteogenesis, but its role in cementogenesis has not been addressed. In the present study, we first documented a close relationship between the temporal- and spatial-expression pattern of OSX and the formation of cellular cementum. We then generated 3.6 Col 1-OSX transgenic mice, which displayed accelerated cementum formation vs. WT controls. Importantly, the conditional deletion of OSX in the mesenchymal cells with two different Cre systems (the 2.3 kb Col 1 and an inducible CAG-CreER) led to a sharp reduction in cellular cementum formation (including the cementum mass and mineral deposition rate) and gene expression of dentin matrix protein 1 (DMP1) by cementocytes. However, the deletion of the OSX gene after cellular cementum formed did not alter the properties of the mature cementum as evaluated by backscattered SEM and resin-cast SEM. Transient transfection of Osx in the cementoblasts in vitro significantly inhibited cell proliferation and increased cell differentiation and mineralization. Taken together, these data support 1) the mesenchymal origin of cellular cementum (from PDL progenitor cells); 2) the vital role of OSX in controlling the formation of cellular cementum; and 3) the limited remodeling of cellular cementum in adult mice.

Profiling work motivation of project workers

The purpose of this study is to understand the constructs of work motivation in project-based organizations. We first juxtapose work motivation in traditional and project-based organizations to put forward an operational definition of work motivation for our study. We then present the research methodology where we profile work motivation as perceived by project workers using principal component analysis. We obtain a five factor structure of work motivation. Finally, we discuss these results by putting them within the project management perspective and suggest managerial implications.

The Influence of work motivation on project success : towards a framework

The purpose of this paper is to suggest a framework to study the influence of 'Work motivation' on 'Project success' from a team members' perspective. Results from a literature review of 1345 articles on ' Project success' and 1063 articles of 'Work motivation' appearing in peer-reviewed journals between 1985 and 2005 are presented. We then propose a framework to study the impact of 'Work motivation' on 'Project success' by incorporating the key constructs pertaining to these variables derived from the literature review.

Profiling work motivation of project workers

The purpose of this study is to understand the constructs of work motivation in project—based organizations. We first juxtapose work motivation in traditional and project—based organizations to put forward an operational definition of work motivation for our study. We then present the research methodology where we profile work motivation as perceived by project workers using principal component analysis. We obtain a five factor structure of work motivation. Finally, we discuss these results by putting them within the project management perspective and suggest managerial implications.

The relation between work motivation and project management success : an empirical investigation

The content and context of work significantly influences an employees’ satisfaction. While managers see work motivation as a tool to engage the employees so that they perform better, academicians value work motivation for its contribution to human behaviour. Though the relationship between employee motivation and project success has been extensively covered in the literature, more research focusing on the nature of job design on project success may have been wanting. We address this gap through this study. The present study contributes to the extant literature by suggesting an operational framework of work motivation for project—based organizations. We are also advancing the conceptual understanding of this variable by understanding how the different facets of work motivation have a differing impact of the various parameters of project performance. A survey instrument using standardized scales of work motivation and project success was used. 199 project workers from various industries completed the survey. We first ‘operationalized’ the definition of work motivation for the purpose of our study through a principal component analysis of work motivation items. We obtained a five factor structure that had items pertaining to employee development, work climate, goal clarity, and job security. We then performed a Pearson’s correlation analysis which revealed moderate to significant relationship between project outcomes ad work climate; project outcomes & employee development. In order to establish a causality between work motivation and project management success, we employed linear regression analysis. The results show that work climate is a significant predictor of client satisfaction, while it moderately influences the project quality. Further, bringing in objectivity to project work is important for a successful implementation.

Work motivation as a determinant of organizational and professional commitment in case of temporary organizations : theoretical perspectives

The purpose of this paper is to present a theoretical framework to investigate the relationship between work motivation, organizational commitment, and professional commitment in temporary organizations. Through a review of theory, we contend that work motivation has two major patterns- internal motivation (that includes intrinsic, need-based, and self-deterministic theories), and external motivation (that includes cognitive or process-based theories of motivation) through which it has been investigated. We also subsume the nature of employee commitment to be of three types- affective, continuance, and normative. This commitment may either be towards organization or profession. A literature review reveals that the characteristics of the temporary organization - specifically tenure, and task - regulate the relationship between work motivation, and organizational commitment, and professional commitment. Relevant propositions are presented.

Work-integrated learning as a component of the capstone experience in undergraduate law

There is currently little guidance in the Australian literature in relation to how to design an effective capstone experience. As a result, universities often fail to provide students with a genuine culminating experience in the final year of their degree. This paper will consider the key objectives of capstone experiences – closure and transition – and will examine how these objectives can be met by a work-integrated learning (WIL) experience. This paper presents an argument for the inclusion of WIL as a component of a capstone experience. WIL is consistent with capstone objectives in focusing on the transition to professional practice. However, the capacity of WIL to meet all of the objectives of capstones may be limited. The paper posits that while WIL should be considered as a potential component of a capstone experience, educators should ensure that WIL is not equated with a capstone experience unless it is carefully designed to ensure that all the objectives of capstones are met.

Mothers of young children with special health care needs : maternal well-being and engagement in work

This thesis reports research focused on the well-being and employment experiences of mothers who have a child with special health care needs. Data are drawn from Growing Up in Australia: The Longitudinal Study of Australian Children (LSAC). This is a public access database. The thesis uses the social ecological theory of Bronfenbrenner (1984) and the work of Zubrick et al. (2000) on human and social capital to inform the conceptual framework developed for the research. Four studies are reported. LSAC has a nationally representative sample of Australian children and their families. The study is tracking the development of 10,000 children, with data collected every two years, from 2004 to 2018. This thesis uses data from the Kindergarten Cohort of LSAC. The 4,983 children in the Kindergarten Cohort were aged 4 years at recruitment into the study in 2004. The analyses in this thesis use child and family data from Wave 1 (2004) and Wave 2 (2006) for a subsample of the children who are identified as having special health needs. This identification is based on a short screening questionnaire included in the Parent 1 Interview at each wave of the data collection. It is the children who are identified as having special health care needs which can be broadly defined as chronic health conditions or developmental difficulties. However, it is the well-being and employment experiences of the mothers of these children that are the primary focus in three of the four studies reported in this thesis.