Automated power semiconductor switching performance feature extraction from experimental double-pulse waveform data

Double-pulse tests are commonly used as a method for assessing the switching performance of power semiconductor switches in a clamped inductive switching application. Data generated from these tests are typically in the form of sampled waveform data captured using an oscilloscope. In cases where it is of interest to explore a multi-dimensional parameter space and corresponding result space it is necessary to reduce the data into key performance metrics via feature extraction. This paper presents techniques for the extraction of switching performance metrics from sampled double-pulse waveform data. The reported techniques are applied to experimental data from characterisation of a cascode gate drive circuit applied to power MOSFETs.

Uneducated : play becomes artwork, artwork becomes play

Over the past twenty years the contemporary art world has seen a significant shift in the modes and structures of connection between work and its audiences. This shift is termed by Irit Rogoff, amongst others, as an ‘educational turn’. The turn has been described as the eruption of discussions and investigations, inside and outside of institutions, that interrupt the presumed power hierarchies and bureaucratised systems of both art and education. This essay was written to accompany artist/curator Kym Maxwell's exhibition project, 'Uneducated', exploring these ideas. It was held at the Counihan Gallery in Melbourne, 2014.

Comparison of the gate drive parameter space for driving power MOSFETs using conventional and cascode configurations

Conventional voltage driven gate drive circuits utilise a resistor to control the switching speed of power MOS-FETs. The gate resistance is adjusted to provide controlled rate of change of load current and voltage. The cascode gate drive configuration has been proposed as an alternative to the conventional resistor-fed gate drive circuit. While cascode drive is broadly understood in the literature the switching characteristics of this topology are not well documented. This paper explores, through both simulation and experimentation, the gate drive parameter space of the cascode gate drive configuration and provides a comparison to the switching characteristics of conventional gate drive.

New pleasures and old dangers: reinventing male sex work

Understandings of male sex workers (MSWs) shift with technological, conceptual, and social changes. Research has historically constructed MSWs as psychologically unstable, desperate, or destitute victims and their clients as socially deviant perverts. These perceptions, however, are no longer supported by contemporary research and changing societal perceptions of the sex industry, challenging how we understand and describe “escorts.” The changing understandings of sexuality and the increasing power of the Internet are both important forces behind recent changes in the structure and organization of MSWs. The growth in the visibility and reach of escorts has created opportunities to form an occupational account of MSWs that better accounts for the dynamic and diverse nature of the MSW experience in the early 21st century. Recent changes in the structure and organization of male sex work have provided visibility to the increasingly diverse geographical distribution of MSW, the commodification of race and racialized desire, new populations of heterosexual men and women as clients, and the successful dissemination of safer sexual messages to MSWs through online channels. This article provides a broad overview of the literature on MSWs, concentrating its focus on studies that have emerged over the past 20 years and identifying areas for future research.

Making climate change manageable : how accounting constructs new power-knowledge regimes

This paper examines the modern power of accounting to permeate new spheres and create new objects by examining how climate change becomes a new category for accounting’s attention. It outlines the socio-political problem space where accounting and climate change connect by tracing the emergence of the UK’s Climate Change Act (2008) to a specifically modern calculating attitude described here as ‘managing by the numbers’. It suggests the intersection of accounting and climate change was made possible by accounting’s role in tying disciplinary subjectivities and objectivities together whilst operating simultaneously at the level of individuals, organisations and government. Such that when faced with new unknowns we revert to previous ways of managing we have come to know and experienced throughout our formative years in schools, hospitals, firms and government departments. In this way, accounting’s emergence in the domain of managing climate change implies a transformation that cannot be explained merely as a practical response to a global warming problem, but rather as an example of a new power-knowledge regime that makes possible the management and control of a new organisational phenomenon called climate change.

Government grants - an abrogation or management of risks?

New public management (NPFM), with its hands-on, private sector-style performance measurement, output control, parsimonious use of resources, disaggreation of public sector units and greater competition in the public sector, has significantly affected charitable and nonprofit organisations delivering community services (Hood, 1991; Dunleavy, 1994; George & Wilding, 2002). The literature indicates that nonprofit organisations under NPM believe they are doing more for less: while administration is increasing, core costs are not being met; their dependence on government funding comes at the expense of other funding strategies; and there are concerns about proportionality and power asymmetries in the relationship (Kerr & Savelsberg, 2001; Powell & Dalton, 2011; Smith, 2002, p. 175; Morris, 1999, 2000a). Government agencies are under increased pressure to do more with less, demonstrate value for money, measure social outcomes, not merely outputs and minimise political risk (Grant, 2008; McGreogor-Lowndes, 2008). Government-community service organisation relationships are often viewed as 'uneasy alliances' characterised by the pressures that come with the parties' differing roles and expectations and the pressures that come with the parties' differing roles and expectations and the pressurs of funding and security (Productivity Commission, 2010, p. 308; McGregor-Lowndes, 2008, p. 45; Morris, 200a). Significant community services are now delivered to citizens through such relationships, often to the most disadvantaged in the community, and it is important for this to be achieved with equity, efficiently and effectively. On one level, the welfare state was seen as a 'risk management system' for the poor, with the state mitigating the risks of sickness, job loss and old age (Giddens, 1999) with the subsequent neoliberalist outlook shifting this risk back to households (Hacker, 2006). At the core of this risk shift are written contracts. Vincent-Jones (1999,2006) has mapped how NPM is characterised by the use of written contracts for all manner of relations; e.g., relgulation of dealings between government agencies, between individual citizens and the state, and the creation of quais-markets of service providers and infrastructure partners. We take this lens of contracts to examine where risk falls in relation to the outsourcing of community services. First we examine the concept of risk. We consider how risk might be managed and apportioned between governments and community serivce organisations (CSOs) in grant agreements, which are quasiy-market transactions at best. This is informed by insights from the law and economics literature. Then, standard grant agreements covering several years in two jurisdictions - Australia and the United Kingdom - are analysed, to establish the risk allocation between government and CSOs. This is placed in the context of the reform agenda in both jurisdictions. In Australia this context is th enonprofit reforms built around the creation of a national charities regulator, and red tape reduction. In the United Kingdom, the backdrop is the THird Way agenda with its compacts, succeed by Big Society in a climate of austerity. These 'case studies' inform a discussion about who is best placed to bear and manage the risks of community service provision on behalf of government. We conclude by identifying the lessons to be learned from our analysis and possible pathways for further scholarship.

Effects of pupil center shift on ocular aberrations

Purpose: To investigate effects of pupil shifts, occurring with changes in luminance and accommodation stimuli, on refraction components and higher-order aberrations. Method: Participants were young and older groups (n=20, 22±2 years, age range 18–25 years; n=19, 49±4 years, 45–58 years). Aberrations/refractions at 4 mm and 3 mm diameters were compared between centered and decentered pupils for low (background 0.01cd/m², 0D), and high (6100cd/m², 4D or 6D) stimuli. Decentration was the difference between pupil centers for low and high stimuli. Clinical important changes with decentration were: M ±0.50D or ±0.25D, J180 and J45 ±0.25D or ±0.125D, HORMS ±0.05m, C(3, 1) ±0.05m, C(4, 0) ±0.05m. Results: Because of small pupil shifts in most participants (mean 0.26mm), there were few important changes in most refraction components and higher-order aberration terms. However, M changed by >0.25 D for a third of participants with 4mm pupils. When determining refractions from 2nd-6th order aberration coefficients, the more stringent criteria gave 76/ 534 (14%) possible important changes. Some participants had large pupil shifts with considerable aberration changes. Comparisons at the high stimulus were possible for only 11 participants because of small pupils. When refractions were determined from 2nd order aberration coefficients only, there were only 35 (7%) important changes for the more stringent criteria. Conclusion: Usually pupil shifts with changes in stimulus conditions have little influence on aberrations, but they can with high shifts. The number of aberrations orders that are considered as contributing to refraction influences the proportion of cases that might be considered clinically important.

WikiLeaks : The Napster of Secrets?

WikiLeaks has become a global phenomenon, and its founder and spokesman Julian Assange an international celebrity (or terrorist, depending on one’s perspective). But perhaps this focus on Assange and his website is as misplaced as the attacks against Napster and its founders were a decade ago: WikiLeaks itself only marks a new phase in a continuing shift in the balance of power between states and citizens, much as Napster helped to undermine the control of major music labels over the music industry. If the history of music filesharing is any guide, no level of punitive action against WikiLeaks and its supporters is going to re-contain the information WikiLeaks has set loose.

A hybrid maximum power point tracking for partially shaded photovoltaic systems in the tropics

Partial shading and rapidly changing irradiance conditions significantly impact on the performance of photovoltaic (PV) systems. These impacts are particularly severe in tropical regions where the climatic conditions result in very large and rapid changes in irradiance. In this paper, a hybrid maximum power point (MPP) tracking (MPPT) technique for PV systems operating under partially shaded conditions witapid irradiance change is proposed. It combines a conventional MPPT and an artificial neural network (ANN)-based MPPT. A low cost method is proposed to predict the global MPP region when expensive irradiance sensors are not available or are not justifiable for cost reasons. It samples the operating point on the stairs of I–V curve and uses a combination of the measured current value at each stair to predict the global MPP region. The conventional MPPT is then used to search within the classified region to get the global MPP. The effectiveness of the proposed MPPT is demonstrated using both simulations and an experimental setup. Experimental comparisons with four existing MPPTs are performed. The results show that the proposed MPPT produces more energy than the other techniques and can effectively track the global MPP with a fast tracking speed under various shading patterns.

Probabilistic power system contingency analysis considering wind

This thesis was a step forward in developing probabilistic assessment of power system response to faults subject to intermittent generation by renewable energy. It has investigated the wind power fluctuation effect on power system stability, and the developed fast estimation process has demonstrated the feasibility for real-time implementation. A better balance between power network security and efficiency can be achieved based on this research outcome.

Battery energy storage systems to improve power system frequency response

Battery energy storage systems (BESS) are becoming feasible to provide system frequency support due to recent developments in technologies and plummeting cost. Adequate response of these devices becomes critical as the penetration of the renewable energy sources increases in the power system. This paper proposes effective use of BESS to improve system frequency performance. The optimal capacity and the operation scheme of BESS for frequency regulation are obtained using two staged optimization process. Furthermore, the effectiveness of BESS for improving the system frequency response is verified using dynamic simulations.

Wireless Power Transfer (WPT) for electric vehicles (EVs) - present and future trends

100 year old gasoline engine technology vehicles have now become one of the major contributors of greenhouse gases. Plug-in Electric Vehicles (PEVs) have been proposed to achieve environmental friendly transportation. Even though the PEV usage is currently increasing, a technology breakthrough would be required to overcome battery related drawbacks. Although battery technology is evolving, drawbacks inherited with batteries such as; cost, size, weight, slower charging characteristic and low energy density would still be dominating constrains for development of EVs. Furthermore, PEVs have not been accepted as preferred choice by many consumers due to charging related issues. To address battery related limitations, the concept of dynamic Wireless Power Transfer (WPT) enabled EVs have been proposed in which EV is being charged while it is in motion. WPT enabled infrastructure has to be employed to achieve dynamic EV charging concept. The weight of the battery pack can be reduced as the required energy storage is lower if the vehicle can be powered wirelessly while driving. Stationary WPT charging where EV is charged wirelessly when it is stopped, is simpler than dynamic WPT in terms of design complexity. However, stationary WPT does not increase vehicle range compared to wired-PEVs. State-of-art WPT technology for future transportation is discussed in this chapter. Analysis of the WPT system and its performance indices are introduced. Modelling the WPT system using different methods such as equivalent circuit theory, two port network theory and coupled mode theory is described illustrating their own merits in Sect. 2.3. Both stationary and dynamic WPT for EV applications are illustrated in Sect. 2.4. Design challenges and optimization directions are analysed in Sect. 2.5. Adaptive tuning techniques such as adaptive impedance matching and frequency tuning are also discussed. A case study for optimizing resonator design is presented in Sect. 2.6. Achievements by the research community is introduced highlighting directions for future research.

Stability synthesis of power hardware-in-the-loop (PHIL) simulation

A virtual power system can be interfaced with a physical system to form a power hardware-in-the-loop (PHIL) simulation. In this scheme, the virtual system can be simulated in a fast parallel processor to provide near real-time outputs, which then can be interfaced to a physical hardware that is called the hardware under test (HuT). Stable operation of the entire system, while maintaining acceptable accuracy, is the main challenge of a PHIL simulation. In this paper, after an extended stability analysis for voltage and current type interfaces, some guidelines are provided to have a stable PHIL simulation. The presented analysis have been evaluated by performing several experimental tests using a Real Time Digital Simulator (RTDS™) and a voltage source converter (VSC). The practical test results are consistent with the proposed analysis.