Active and reactive power control of synchronous generator for the realization of a virtual power plant

This paper presents a novel power control strategy that decouples the active and reactive power for a synchronous generator connected to a power network. The proposed control paradigm considers the capacitance of the transmission line along with its resistance and reactance as-well. Moreover the proposed controller takes into account all cases of R-X relationships, thus allowing it to function in Virtual Power Plant (VPP) structures which operate at both medium voltage (MV) and low voltage (LV) levels. The independent control of active and reactive power is achieved through rotational transformations of the terminal voltages and currents at the synchronous generator's output. This paper details the control technique by first presenting the mathematical and electrical network analysis of the methodology and then successfully implementing the control using MATLAB-SIMULINK simulation.

Comparison of self-reported driving behaviours and experiences of immediate-uptake and delayed-uptake licence holders

The objective of this paper was to explore experiences of ‘immediate-uptake’ (intermediate licensure at age 17-18 years, n = 928) and ‘delayed-uptake’ (intermediate licensure at age 19-20 years, n = 158) driver’s licence holders in the Australian state of Queensland. In Queensland, the graduated driver licence program applies to all novices irrespective of age. Drivers who obtained a Provisional 1 (intermediate) (P1) licence completed a survey exploring pre-Licence and Learner experiences, including the Behaviour of Young Novice Drivers Scale (BYNDS). Six months later, 351 drivers from this sample (n = 300 immediate-uptake) completed a survey exploring P1 driving. Delayed-uptake Learners reported significantly more difficulty gaining driving practice, which appeared to be associated with significantly greater engagement in unsupervised driving during the Learner period. Whilst a larger proportion of delayed-uptake novices, particularly males, reported the use of more active punishment avoidance strategies (avoiding Police, talking themselves out of a ticket) in the P1 phase, there was no significant difference in the BYNDS scores in the Learner and P1 phases according to licence-uptake category. Delayed-uptake novices report more difficulty meeting GDL requirements and place themselves at increased risk by driving unsupervised during the Learner licence phase. Additional efforts such as mentoring programs which can support the delayed-uptake Learner in meeting their GDL obligations merit further consideration to allow this novice group to gain the full benefits of the GDL program and to reduce their risk of harm in the short-term.

e-Technology v t-Engagement : a snapshot of Australia's digital economy readiness

Before e-Technology’s effects on users can be accurately measured, those users must be fully engaged with the relevant systems and services. That is they must be able to function as part of the digital economy. The paper refers to this ‘user functionality’ as t-Engagement. Not all users are t-Engaged and in many instances achieving t-Engagement will require assistance from external sources. This paper identifies the current state of Australia’s regional digital economy readiness and highlights the role of Local Government Authorities (‘LGAs’) in enabling t-Engagement. The paper analyses responses to the 2012 BTA, NBN and Digital Economy Survey by LGA and other regional organizations within Australia. The paper’s particular focus is on the level of use by Local Government Authorities of federal, state and other programs designed to enable t-Engagement. The analysis confirms the role of LGAs in enabling t-Engagement and in promoting Australia’s digital economy. The paper concludes by reinforcing the need to ensure ongoing meaningful federal and State support of regional initiatives, as well as identifying issues requiring specific attention.

A model for enhancing assessment and teaching practice at the coalface : Insights from a Fellow-In-Residence engagement program

Australian universities are currently engaging with new governmental policies and regulations that require them to demonstrate enhanced quality and accountability in teaching and research. The development of national academic standards for learning outcomes in higher education is one such instance of this drive for excellence. These discipline-specific standards articulate the minimum, or Threshold Learning Outcomes, to be addressed by higher education institutions so that graduating students can demonstrate their achievement to their institutions, accreditation agencies, and industry recruiters. This impacts not only on the design of Engineering courses (with particular emphasis on pedagogy and assessment), but also on the preparation of academics to engage with these standards and implement them in their day-to-day teaching practice on a micro level. This imperative for enhanced quality and accountability in teaching is also significant at a meso level, for according to the Australian Bureau of Statistics, about 25 per cent of teachers in Australian universities are aged 55 and above and more than 54 per cent are aged 45 and above (ABS, 2006). A number of institutions have undertaken recruitment drives to regenerate and enrich their academic workforce by appointing capacity-building research professors and increasing the numbers of early- and mid-career academics. This nationally driven agenda for quality and accountability in teaching permeates also the micro level of engineering education, since the demand for enhanced academic standards and learning outcomes requires both a strong advocacy for a shift to an authentic, collaborative, outcomes-focused education and the mechanisms to support academics in transforming their professional thinking and practice. Outcomes-focused education means giving greater attention to the ways in which the curriculum design, pedagogy, assessment approaches and teaching activities can most effectively make a positive, verifiable difference to students’ learning. Such education is authentic when it is couched firmly in the realities of learning environments, student and academic staff characteristics, and trustworthy educational research. That education will be richer and more efficient when staff works collaboratively, contributing their knowledge, experience and skills to achieve learning outcomes based on agreed objectives. We know that the school or departmental levels of universities are the most effective loci of changes in approaches to teaching and learning practices in higher education (Knight & Trowler, 2000). Heads of Schools are being increasingly entrusted with more responsibilities - in addition to setting strategic directions and managing the operational and sometimes financial aspects of their school, they are also expected to lead the development and delivery of the teaching, research and other academic activities. Guiding and mentoring individuals and groups of academics is one critical aspect of the Head of School’s role. Yet they do not always have the resources or support to help them mentor staff, especially the more junior academics. In summary, the international trend in undergraduate engineering course accreditation towards the demonstration of attainment of graduate attributes poses new challenges in addressing academic staff development needs and the assessment of learning. This paper will give some insights into the conceptual design, implementation and empirical effectiveness to date, of a Fellow-In-Residence Engagement (FIRE) program. The program is proposed as a model for achieving better engagement of academics with contemporary issues and effectively enhancing their teaching and assessment practices. It will also report on the program’s collaborative approach to working with Heads of Schools to better support academics, especially early-career ones, by utilizing formal and informal mentoring. Further, the paper will discuss possible factors that may assist the achievement of the intended outcomes of such a model, and will examine its contributions to engendering an outcomes-focussed thinking in engineering education.

Sociocultural affordances of online peer engagement

University learning increasingly includes online learning experiences embedded within teaching with the dual policy intentions of increasing flexibility and learner engagement. In this research project, three university lecturers from different teaching contexts selected technologies for online learning to enhance learner engagement by encouraging peer learning. A sociocultural view of learning was used to conceptualise the technological and social affordances that might enable student peer participation and engagement. The research explored the question: “What are the benefits and barriers experienced by students engaging in online peer collaboration?” Students reported benefits including a sense of belonging that enhanced motivation, and professional identity. This article also reports on some of the challenges for students and University academics when engaging in online learning communities.

Designing a new robust on-line secondary path modeling technique for feedforward active noise control systems

Several approaches have been introduced in the literature for active noise control (ANC) systems. Since the filtered-x least-mean-square (FxLMS) algorithm appears to be the best choice as a controller filter, researchers tend to improve performance of ANC systems by enhancing and modifying this algorithm. This paper proposes a new version of the FxLMS algorithm, as a first novelty. In many ANC applications, an on-line secondary path modeling method using white noise as a training signal is required to ensure convergence of the system. As a second novelty, this paper proposes a new approach for on-line secondary path modeling on the basis of a new variable-step-size (VSS) LMS algorithm in feed forward ANC systems. The proposed algorithm is designed so that the noise injection is stopped at the optimum point when the modeling accuracy is sufficient. In this approach, a sudden change in the secondary path during operation makes the algorithm reactivate injection of the white noise to re-adjust the secondary path estimate. Comparative simulation results shown in this paper indicate the effectiveness of the proposed approach in reducing both narrow-band and broad-band noise. In addition, the proposed ANC system is robust against sudden changes of the secondary path model.

A self-tuning feedforward active noise control system

This paper proposes a self-tuning feedforward active noise control (ANC) system with online secondary path modeling. The step-size parameters of the controller and modeling filters have crucial rule on the system performance. In literature, these parameters are adjusted by trial-and-error. In other words, they are manually initialized before system starting, which require performing extensive experiments to ensure the convergence of the system. Hence there is no guarantee that the system could perform well under different situations. In the proposed method, the appropriate values for the step-sizes are obtained automatically. Computer simulation results indicate the effectiveness of the proposed method.

An efficient online secondary path estimation for feedback active noise control systems

In practical cases for active noise control (ANC), the secondary path has usually a time varying behavior. For these cases, an online secondary path modeling method that uses a white noise as a training signal is required to ensure convergence of the system. The modeling accuracy and the convergence rate are increased when a white noise with a larger variance is used. However, the larger variance increases the residual noise, which decreases performance of the system and additionally causes instability problem to feedback structures. A sudden change in the secondary path leads to divergence of the online secondary path modeling filter. To overcome these problems, this paper proposes a new approach for online secondary path modeling in feedback ANC systems. The proposed algorithm uses the advantages of white noise with larger variance to model the secondary path, but the injection is stopped at the optimum point to increase performance of the algorithm and to prevent the instability effect of the white noise. In this approach, instead of continuous injection of the white noise, a sudden change in secondary path during the operation makes the algorithm to reactivate injection of the white noise to correct the secondary path estimation. In addition, the proposed method models the secondary path without the need of using off-line estimation of the secondary path. Considering the above features increases the convergence rate and modeling accuracy, which results in a high system performance. Computer simulation results shown in this paper indicate effectiveness of the proposed method.

Making more sustainable urban environments by responding to neurodiversity in later life

The ageing population is increasing worldwide, as are a range of chronic diseases, conditions, and physical and cognitive disabilities associated with later life. The older population is also neurologically diverse, with unique and specific challenges around mobility and engagement with the urban environment. Older people tend to interact less with cities and neighbourhoods, putting them at risk of further illnesses and co-morbidities associated with being less physically and socially active. Empirical evidence has shown that reduced access to healthcare services, health-related resources and social interaction opportunities is associated with increases in morbidity and premature mortality. While it is crucial to respond to the needs of this ageing population, there is insufficient evidence for interventions regarding their experiences of public space from the vantage point of neurodiversity. This paper provides a conceptual and methodological framework to investigate relationships between the sensory and cognitive abilities of older people, and their use and negotiation of the urban environment. The paper will refer to a case example of the city of Logan, an urban area in Queensland, Australia, where current urban development provides opportunities for the design of spaces that take experiences of neurodiversity into account. The framework will inform the development of principles for urban design for increasingly neurologically diverse populations.

‘The health-location connection’: using GIS and social media on smartphones to track engagement with the Local urban environment for work, recreation, and physical activity

A technologically innovative study was undertaken across two suburbs in Brisbane, Australia, to assess socioeconomic differences in women's use of the local environment for work, recreation, and physical activity. Mothers from high and low socioeconomic suburbs were instructed to continue with usual daily routines, and to use mobile phone applications (Facebook Places, Twitter, and Foursquare) on their mobile phones to ‘check-in’ at each location and destination they reached during a one-week period. These smartphone applications are able to track travel logistics via built-in geographical information systems (GIS), which record participants’ points of latitude and longitude at each destination they reach. Location data were downloaded to Google Earth and excel for analysis. Women provided additional qualitative data via text regarding the reasons and social contexts of their travel. We analysed 2183 ‘check-ins’ for 54 women in this pilot study to gain quantitative, qualitative, and spatial data on human-environment interactions. Data was gathered on distances travelled, mode of transport, reason for travel, social context of travel, and categorised in terms of physical activity type – walking, running, sports, gym, cycling, or playing in the park. We found that the women in both suburbs had similar daily routines with the exception of physical activity. We identified 15% of ‘check-ins’ in the lower socioeconomic group as qualifying for the physical activity category, compared with 23% in the higher socioeconomic group. This was explained by more daily walking for transport (1.7kms to 0.2kms) and less car travel each week (28.km to 48.4kms) in the higher socioeconomic suburb. We ascertained insights regarding the socio-cultural influences on these differences via additional qualitative data. We discuss the benefits and limitations of using new technologies and Google Earth with implications for informing future physical and social aspects of urban design, and health promotion in socioeconomically diverse cities.

Good practice for safeguarding student learning engagement in higher education institutions : Final Report 2012

The project 'Good practice for safeguarding student learning engagement in higher education institutions' commenced in late 2010 as a Competitive Grant with funding provided by the Australian Learning and Teaching Council. The project is now overseen by the Office for Learning and Teaching within the Australian Department of Industry, Innovation, Science, Research and Tertiary Education. The project was completed in December 2012. The project was lead by QUT and comprised of the project team: Professor Karen Nelson, (project leader), Ms Tracy Creagh, (project manager) and Adjunct Professor John Clarke. Commencing in late 2010 the project invited a total of eight institutions across Australia and New Zealand (including QUT) who had either: existing programs and activities that monitored student learning engagement (MSLE); were in the early stages of implementing MSLE programs, or; who were piloting MSLE activities. As well, the project involved an advisory group and project evaluator comprising of academic and professional staff across two additional universities.

A variable step-size FxLMS algorithm for feedforward active noise control systems based on a new online secondary path modelling technique

Several approaches have been introduced in literature for active noise control (ANC) systems. Since FxLMS algorithm appears to be the best choice as a controller filter, researchers tend to improve performance of ANC systems by enhancing and modifying this algorithm. This paper proposes a new version of FxLMS algorithm. In many ANC applications an online secondary path modelling method using a white noise as a training signal is required to ensure convergence of the system. This paper also proposes a new approach for online secondary path modelling in feedfoward ANC systems. The proposed algorithm stops injection of the white noise at the optimum point and reactivate the injection during the operation, if needed, to maintain performance of the system. Benefiting new version of FxLMS algorithm and not continually injection of white noise makes the system more desirable and improves the noise attenuation performance. Comparative simulation results indicate effectiveness of the proposed approach.

A new online secondary path modelling method for feedforward active noise control systems

An online secondary path modelling method using a white noise as a training signal is required in many applications of active noise control (ANC) to ensure convergence of the system. Not continually injection of white noise during system operation makes the system more desirable. The purposes of the proposed method are two folds: controlling white noise by preventing continually injection, and benefiting white noise with a larger variance. The modelling accuracy and the convergence rate increase when a white noise with larger variance is used, however larger the variance increases the residual noise, which decreases performance of the system. This paper proposes a new approach for online secondary path modelling in feedfoward ANC systems. The proposed algorithm uses the advantages of the white noise with larger variance to model the secondary path, but the injection is stopped at the optimum point to increase performance of the system. Comparative simulation results shown in this paper indicate effectiveness of the proposed approach in controlling active noise.

Strategies for gaining and maintaining academic support for the institutional open access repository

The impact of research can be measured by use or citation count. The more widely available that research outputs are; the more likely they are to be used, and the higher the impact. Making the author-manuscript version of research outputs freely available via the institutional repository greatly increases the availability of research outputs and can increase the impact. QUT ePrints, the open access institutional repository of research outputs at Queensland University of Technology (QUT), Australia, was established in 2003 and is managed by the QUT Library. The repository now contains over 39,000 records. More than 21,000 of these records have full-text copies attached as result of continuous effort to maintain momentum and encourage academic engagement. The full-text deposit rate has continued to increase over time and, in 2012 (August, at the time of writing), 88% of the records for works published in 2012 provide access to a full-text copy. Achieving success has required a long term approach to collaboration, open access advocacy, repository promotion, support for the deposit process, and ongoing system development. This paper discusses the various approaches adopted by QUT Library, in collaboration with other areas of the University, to achieve success. Approaches include mainstreaming the repository via having it report to the University Research and Innovation Committee; regular provision of deposit rate data to faculties; championing key academic supporters; and holding promotional competitions and events such as during Open Access Week. Support and training is provided via regular deposit workshops with academics and faculty research support groups and via the provision of online self-help information. Recent system developments have included the integration of citation data (from Scopus and Web of Science) and the development of a statistical reporting system which incentivise engagement.