Comparison of Body Composition Assessment Methods in Breast Cancer Survivors

Purpose/Objectives: To examine and compare the reliability of four body composition methods commonly used in assessing breast cancer survivors. Design: Cross-sectional. Setting: A rehabilitation facility at a university-based comprehensive cancer center in the southeastern United States. Sample: 14 breast cancer survivors aged 40-71 years. Methods: Body fat (BF) percentage was estimated via bioelectric impedance analysis (BIA), air displacement plethysmography (ADP), and skinfold thickness (SKF) using both three- and seven-site algorithms, where reliability of the methods was evaluated by conducting two tests for each method (test 1 and test 2), one immediately after the other. An analysis of variance was used to compare the results of BF percentage among the four methods. Intraclass correlation coefficient (ICC) was used to test the reliability of each method. Main Research Variable: BF percentage. Findings: Significant differences in BF percentage were observed between BIA and all other methods (three-site SKF, p < 0.001; seven-site SKF, p < 0.001; ADP, p = 0.002). No significant differences (p > 0.05) in BF percentage between three-site SKF, seven-site SKF, and ADP were observed. ICCs between test 1 and test 2 for each method were BIA = 1, ADP = 0.98, three-site SKF = 0.99, and seven-site SKF = 0.94. Conclusions: ADP and both SKF methods produce similar estimates of BF percentage in all participants, whereas BIA overestimated BF percentage relative to the other measures. Caution is recommended when using BIA as the body composition method for breast cancer survivors who have completed treatment but are still undergoing adjuvant hormonal therapy. Implications for Nursing: Measurements of body composition can be implemented very easily as part of usual care and should serve as an objective outcome measure for interventions designed to promote healthy behaviors among breast cancer survivors. - See more at: https://onf.ons.org/onf/38/4/comparison-body-composition-assessment-methods-breast-cancer-survivors#sthash.5djfTS1Q.dpuf

Effectiveness of two forms of grouted reinforced confinement methods to hollow concrete masonry panels

This paper presents a study on the effectiveness of two forms of reinforced grout confining systems for hollow concrete block masonry. The systems considered are: (1) a layer of grout directly confining the unreinforced masonry, and (2) a layer of grout indirectly confining the unreinforced masonry through block shells. The study involves experimental testing and finite-element (FE) modeling of six diagonally loaded masonry panels containing the two confining systems. The failure mode, the ultimate load, and the load-deformation behaviors of the diagonally loaded panels were successfully simulated using the finite-element model. In-plane shear strength and stiffness of the masonry thus determined are used to evaluate some selected models of the confined masonry shear including the strut-and-tie model reported in the literature. The evaluated strut width is compared with the prediction of the FE model and then extended for rational prediction of the strength of confined masonry shear walls.

Focusing on what counts: Using exploratory focus groups to enhance the development of an electronic survey in a mixed-methods research design

This paper describes the use of exploratory focus groups to inform the development of a survey instrument in a sequential phase mixed methods study investigating differences in secondary students’ career choice capability. Five focus groups were conducted with 23 year 10 students in the state of New South Wales (NSW), Australia. Analysis of the focus group data informed the design of the instrument for the second phase of the research project: a large-scale cross-sectional survey. In this paper, we discuss the benefits of using sequential phase mixed method approaches when inquiring into complex phenomena such as human capability.

How European public sector agencies innovate: The use of bottom-up, policy-dependent and knowledge-scanning innovation methods

Factor and cluster analysis are used to identify different methods that public sector agencies in Europeuse to innovate, based on data from a 2010 survey of 3273 agencies. The analyses identify three types ofinnovative agencies: bottom-up, knowledge-scanning, and policy-dependent. The distribution of bottom-up agencies across European countries is positively correlated with average per capita incomes while thedistribution of knowledge-scanning agencies is negatively correlated with income. In contrast, there isno consistent pattern by country in the distribution of policy-dependent agencies. Regression resultsthat control for agency characteristics find that innovation methods are significantly correlated with thebeneficial outcomes of innovation, with bottom-up and knowledge-scanning agencies out-performingpolicy-dependent agencies.

Evolution of self-reporting methods for identifying discrete emotions in science classrooms

Emotion researchers have grappled with challenging methodological issues in capturing emotions of participants in naturalistic settings such as school or university classrooms. Self-reporting methods have been used frequently, yet these methods are inadequate when used alone. We argue that the self-reporting methods of emotion diaries and cogenerative dialogues can be helpful in identifying in-the-moment emotions when used in conjunction with the microanalysis of video recordings of classroom events. We trace the evolution of our use of innovative self-reporting methods through three cases from our research projects, and propose new directions for our ongoing development and application of these methods in both school and university classrooms.

Choosing appropriate contract methods for design-build projects

For design-build (DB) projects, owners normally use lump sum and Guaranteed Maximum Price (GMP) as the major contract payment provisions. However, there was a lack of empirical studies to compare the project performance within different contract types and investigate how different project characteristics affect the owners’ selection of contract arrangement. Project information from Design-build Institute of America (DBIA) database was collected to reveal the statistical relationship between different project characteristics and contract types and to compare project performance between lump sum and GMP contract. The results show that lump sum is still the most frequently used contract method for DB projects, especially in the public sector. However, projects using GMP contract are more likely to have less schedule delay and cost overrun as compared to those with lump sum contract. The chi-square tests of cross tabulations reveal that project type, owner type, and procurement method affect the selection of contract types significantly. Civil infrastructure rather than industrial engineering project tends to use lump sum more frequently; and qualification-oriented contractor selection process resorts to GMP more often compared with cost-oriented process. The findings of this research contribute to the current body of knowledge concerning the effect of associated project characteristics on contract type selection. Overall, the results of this study provide empirical evidence from real DB projects that can be used by owners to select appropriate contract types and eventually improve future project performance.

Bayesian computational methods for spatial analysis of images

This thesis introduces a new way of using prior information in a spatial model and develops scalable algorithms for fitting this model to large imaging datasets. These methods are employed for image-guided radiation therapy and satellite based classification of land use and water quality. This study has utilized a pre-computation step to achieve a hundredfold improvement in the elapsed runtime for model fitting. This makes it much more feasible to apply these models to real-world problems, and enables full Bayesian inference for images with a million or more pixels.

Bitboard methods for games

Bitboards allow the efficient encoding of games for computer play and the application of fast bitwiseparallel algorithms for common game-related operations. This article describes: (1) a selection of bitboard techniques including an introduction to bitboards and bitwise operations; (2) a classification scheme that distinguishes filter, query and update methods, and; (3) a sampling of bitboard algorithms for a range of games other than chess, with notes on their performance and practical application.

Comparison of visual inspection and structural-health monitoring as bridge condition assessment methods

This paper presents the results of a research project aimed at examining the capabilities and challenges of two distinct but not mutually exclusive approaches to in-service bridge assessment: visual inspection and installed monitoring systems. In this study, the intended functionality of both approaches was evaluated on its ability to identify potential structural damage and to provide decision-making support. Inspection and monitoring are compared in terms of their functional performance, cost, and barriers (real and perceived) to implementation. Both methods have strengths and weaknesses across the metrics analyzed, and it is likely that a hybrid evaluation technique that adopts both approaches will optimize efficiency of condition assessment and ultimately lead to better decision making.

Agent-based simulation as a component of mixed methods in entrepreneurship research

As a new research method supplementing the existing qualitative and quantitative approaches, agent-based modelling and simulation (ABMS) may fit well within the entrepreneurship field because the core concepts and basic premises of entrepreneurship coincide with the characteristics of ABMS (McKelvey, 2004; Yang & Chandra, 2013). Agent-based simulation is a simulation method based on agent-based models. The agentbased models are composed of heterogeneous agents and their behavioural rules. By repeatedly carrying out agent-based simulations on a computer, the simulations reproduce each agent’s behaviour, their interactive process, and the emerging macroscopic phenomenon according to the flow of time. Using agent-based simulations, researchers may investigate temporal or dynamic effects of each agent’s behaviours.

Wrapped optoelectronic devices and methods for making same

In various embodiments, optoelectronic devices are described herein. The optoelectronic device may include an optoelectronic cell arranged so as to wrap around a central axis wherein the cell includes a first conductive layer, a semi-conductive layer disposed over and in electrical communication with the first conductive layer, and a second conductive layer disposed over and in electrical communication with the semi-conductive layer. In various embodiments, methods for making optoelectronic devices are described herein. The methods may include forming an optoelectronic cell while flat and wrapping the optoelectronic cell around a central axis. The optoelectronic devices may be photovoltaic devices. Alternatively, the optoelectronic devices may be organic light emitting diodes.

Anatomy of a trending topic : Methods for the visualisation of retweet chains [Anatomie eines Trending Topics: Methoden zur Visualisierung von Retweet-Ketten]

Twitter and other social networking sites play an ever more present role in the spread of current events. The dynamics of information dissemination through digital network structures are still relatively unexplored, however. At what time an issue is taken up by whom? Who forwards a message when to whom else? What role do individual communication participants, existing digital communities or the technical foundations of each network platform play in the spread of news? In this chapter we discuss, using the example of a video on a current sociopolitical issue in Australia that was shared on Twitter, a number of new methods for the dynamic visualisation and analysis of communication processes. Our method combines temporal and spatial analytical approaches and provides new insights into the spread of news in digital networks. [Social media dienen immer häufger als Disseminationsmechanismen für Medieninhalte. Auf Twitter ermöglicht besonders die Retweet-Funktion den schnellen und weitläufgen Transfer von Nachrichten. In diesem Beitrag etablieren neue methodische Ansätze zur Erfassung, Visualisierung und Analyse von Retweet-Ketten. Insbesondere heben wir hervor, wie bestehende Netzwerkanalysemethoden ergänzt werden können, um den Ablauf der Weiterleitung sowohl temporal als auch spatial zu erfassen. Unsere Fallstudie demonstriert die verbreitung des videoclips einer am 9. Oktober 2012 spontan gehaltenen Wutrede der australischen Premierministerin Julia Gillard, in der sie Oppositionsführer Tony Abbott als Frauenhasser brandmarkte. Durch die Erfassung von Hintergrunddaten zu den jeweiligen NutzerInnen, die sich an der Weiterleitung des Videoclips beteiligten, erstellen wir ein detailliertes Bild des Disseminationsablaufs im vorliegenden Fall. So lassen sich die wichtigsten AkteurInnen und der Ablauf der Weiterleitung darstellen und analysieren. Daraus entstehen Einblicke in die allgemeinen verbreitungsmuster von Nachrichten auf Twitter].

Stochastic linear multistep methods for the simulation of chemical kinetics

In this paper, we introduce the Stochastic Adams-Bashforth (SAB) and Stochastic Adams-Moulton (SAM) methods as an extension of the tau-leaping framework to past information. Using the theta-trapezoidal tau-leap method of weak order two as a starting procedure, we show that the k-step SAB method with k >= 3 is order three in the mean and correlation, while a predictor-corrector implementation of the SAM method is weak order three in the mean but only order one in the correlation. These convergence results have been derived analytically for linear problems and successfully tested numerically for both linear and non-linear systems. A series of additional examples have been implemented in order to demonstrate the efficacy of this approach.

Kits and methods for diagnosis, screening, treatment and disease monitoring [WO 2015048852 A1]

Disclosed are methods for detecting the presence of a carcinoma or an increased likelihood that a carcinoma is present in a subject. More particularly, the present invention discloses methods for diagnosis, screening, treatment and monitoring of carcinomas associated with aberrant DNA methylation of the MED15 promoter region

Using Bourdieu in education research: Theory and methods

This workshop will snapshot Bourdieu's sociology. In recognition of Bourdieu's work as a powerful theoretical instrument to speculate the reproduction of social orders and cultural values, the workshop will firstly discuss the core concepts of habitus, capital, and field – the foundational triad of Bourdieu's sociology. Although Bourdieu's original work was built on some quantitative studies, his sociology has been largely qualitatively used in education research. Different from the bulk of extant research, the workshop will secondly showcase some quantitative and mixed methods research that uses a Bourdieusian framework. Mindful of such a framework helping understand social practice at a macro level, the workshop will then make an attempt to think through the macro and the micro by weaving together Bourdieu's sociology with Garfinkel's ethnomethodology. The workshop will conclude with some reflections and communications in terms of how to better realise the full value of Bourdieu in education research.