731 resultados para Collaborative development
Resumo:
The development of chlamydial vaccines continues to be a major challenge for researchers. While acute infections are the main target of vaccine development groups, Chlamydia is well known for its ability to establish chronic or persistent infections in its host. To date, little effort has focussed specifically on the challenges of vaccines to successfully combat the chronic or persistent phase of the disease and yet this will be a necessary aspect of any fully successful chlamydial vaccine. This short review specifically examines the phenomenon of chlamydial persistence and the unique challenges that this brings to vaccine development.
Resumo:
Rivers and water are valuable natural resources for human life, environment and national development. Recognition of water resources as national heritage will contribute towards more long term sustainable property development. Waterfront development is already a well-established phenomenon internationally. In Malaysia, as the economy began to change in 1980s, so did the land uses along many of the river and waterfront locations. The pressures of new technology coupled with an urban population growth and urbanization began to force a transition from water dependent industry to a variety of non-water dependent developments such as apartments, offices, and retail shopping areas. Residential waterfront development has taken advantage of available land and water amenities and incorporated as a feature or “selling point” of the development. It has been found that wide views of water add an average of 59% to the value of waterfront property, as well as providing attractive landscaping and better property neighborhoods respectively. Development of waterfront lands in Malaysia occurred with limited federal, state, or municipal planning guidance; resulting in cost aspects like flooding and pollution. Although some waterfront development projects continue to remain profitable with a maintained successful public access component, many have not. This paper provides a brief introduction to the research project to address this issue, which is currently on-going.
Resumo:
Modern Engineering Asset Management (EAM) requires the accurate assessment of current and the prediction of future asset health condition. Appropriate mathematical models that are capable of estimating times to failures and the probability of failures in the future are essential in EAM. In most real-life situations, the lifetime of an engineering asset is influenced and/or indicated by different factors that are termed as covariates. Hazard prediction with covariates is an elemental notion in the reliability theory to estimate the tendency of an engineering asset failing instantaneously beyond the current time assumed that it has already survived up to the current time. A number of statistical covariate-based hazard models have been developed. However, none of them has explicitly incorporated both external and internal covariates into one model. This paper introduces a novel covariate-based hazard model to address this concern. This model is named as Explicit Hazard Model (EHM). Both the semi-parametric and non-parametric forms of this model are presented in the paper. The major purpose of this paper is to illustrate the theoretical development of EHM. Due to page limitation, a case study with the reliability field data is presented in the applications part of this study.
Resumo:
This book reports the outcomes of an investigation into discovering the qualitatively different ways that students experience Problem-based learning (PBL)in virtual space. PBL is increasingly being used in many fields including engineering education. At the same time, many engineering education providers are turning to online distance education. Unfortunately there is a dearth of research into what constitutes an effective learning experience for adult learners who undertake PBL instruction through online distance education. Data were collected from a course which adopted the PBL strategy and was delivered entirely in virtual space. Students were asked to respond to open-ended questions designed to elicit their learning experiences. Data were analysed using the phenomenographic approach. Five qualitatively different ways of experiencing PBL in virtual space were discovered. Results indicate that the design of students' online learning experience was responsible for making students aware of deeper ways of experienceing PBL in virtual space. The outcomes imply that pedagogical strategies can be devised for shifting students' focus as they engage in virtual PBL.
Resumo:
Professional drivers and safety Within the industrialised world, work-related crashes are the most common cause of work-related death, injury and reduced productivity (Charbotel et al., 2001; Toscano and Windau, 1994). Likewise in Australia, road crashes are the most common cause of work-related fatalities, injuries and absence from work (Haworth et al., 2000), with the average time lost being greater than any other workplace claim (Stewart-Bogle, 1999). There are obvious costs related to work crashes such as vehicle and property repair costs. There are also many hidden expenses including third party costs, workers compensation, medical costs, rehabilitation, customer-related costs, increased insurance premiums, administrative costs, legal fees and loss of productivity (Collingwood, 1997; Haworth et al, 2000).
Resumo:
Campus Kindergarten is a community-based centre for early childhood education and care located on campus at the University of Queensland (UQ) in Brisbane, Australia. Being located within this diverse community has presented many opportunities for Campus Kindergarten. It is creating and embracing possibilities that has formed the basis for ongoing projects for children and teachers involving research and investigation. In 2002 Campus Kindergarten embarked on a collaborative project with the Art Museum bringing together these two departments within the university community.
Resumo:
Background: The reasons that a patient has to start treatment, their “Cues to Action”, are important for determining subsequent health behaviours. Cues to action are an explicit component of the Health Belief Model of CPAP acceptance adherence. At present there is no scale available to measure this construct for individuals with Obstructive Sleep Apnoea (OSA). This paper aims to develop, validate and describe responding patterns within an OSA patient sample to the Cues to CPAP Use Questionnaire (CCUQ).----- Method: Participants were 63 adult patients diagnosed with OSA who had never tried CPAP when initially recruited. The CCUQ was completed at one month after being prescribed CPAP.----- Results: Exploratory factor analysis (EFA) showed a three factor structure of the 9-item CCUQ, with “Health Cues”, “Partner Cues” and “Health Professional Cues” subscales accounting for 59.91% of the total variance. The CCUQ demonstrated modest internal consistency and split-half reliability. The questionnaire is brief and user-friendly, with readability at a 7th grade level. The most frequently endorsed cues for starting CPAP were Health Professional Cues (prompting by the sleep physician) and Health Cues such as tiredness and concern about health outcomes.----- Conclusions: This study validates a measure of an important motivational component of the Health Belief Model. Health Professional Cues and internal Health Cues were reported to be the most important prompts to commence CPAP by this patient sample.
Resumo:
The human lens comprises two distinct regions in which the refractive index changes at different rates. The periphery contains a rapidly increasing refractive index gradient, which becomes steeper with age. The inner region contains a shallow gradient, which flattens with age, due to formation of a central plateau, of RI = 1.418, which reaches a maximum size of 7.0 × 3.05 mm around age 60 years. Formation of the plateau can be attributed to compression of fibre cells generated in prenatal life. Present in prenatal but not in postnatal fibre cells, γ-crystallin may play a role in limiting nuclear cell compression.
Resumo:
It is important to detect and treat malnutrition in hospital patients so as to improve clinical outcome and reduce hospital stay. The aim of this study was to develop and validate a nutrition screening tool with a simple and quick scoring system for acute hospital patients in Singapore. In this study, 818 newly admitted patients aged above 18 years old were screened using five parameters that contribute to the risk of malnutrition. A dietitian blinded to the nutrition screening score assessed the same patients using the reference standard, Subjective Global Assessment (SGA) within 48 hours. The sensitivity and specificity were established using the Receiver Operator Characteristics (ROC) curve and the best cutoff scores determined. The nutrition parameter with the largest Area Under the ROC Curve (AUC) was chosen as the final screening tool, which was named 3-Minute Nutrition Screening (3-MinNS). The combination of the parameters weight loss, intake and muscle wastage (3-MinNS), gave the largest AUC when compared with SGA. Using 3-MinNS, the best cutoff point to identify malnourished patients is three (sensitivity 86%, specificity 83%). The cutoff score to identify subjects at risk of severe malnutrition is five (sensitivity 93%, specificity 86%). 3-Minute Nutrition Screening is a valid, simple and rapid tool to identify patients at risk of malnutrition in Singapore acute hospital patients. It is able to differentiate patients at risk of moderate malnutrition and severe malnutrition for prioritization and management purposes.
Resumo:
Heart disease is attributed as the highest cause of death in the world. Although this could be alleviated by heart transplantation, there is a chronic shortage of donor hearts and so mechanical solutions are being considered. Currently, many Ventricular Assist Devices (VADs) are being developed worldwide in an effort to increase life expectancy and quality of life for end stage heart failure patients. Current pre-clinical testing methods for VADs involve laboratory testing using Mock Circulation Loops (MCLs), and in vivo testing in animal models. The research and development of highly accurate MCLs is vital to the continuous improvement of VAD performance. The first objective of this study was to develop and validate a mathematical model of a MCL. This model could then be used in the design and construction of a variable compliance chamber to improve the performance of an existing MCL as well as form the basis for a new miniaturised MCL. An extensive review of literature was carried out on MCLs and mathematical modelling of their function. A mathematical model of a MCL was then created in the MATLAB/SIMULINK environment. This model included variable features such as resistance, fluid inertia and volumes (resulting from the pipe lengths and diameters); compliance of Windkessel chambers, atria and ventricles; density of both fluid and compressed air applied to the system; gravitational effects on vertical columns of fluid; and accurately modelled actuators controlling the ventricle contraction. This model was then validated using the physical properties and pressure and flow traces produced from a previously developed MCL. A variable compliance chamber was designed to reproduce parameters determined by the mathematical model. The function of the variability was achieved by controlling the transmural pressure across a diaphragm to alter the compliance of the system. An initial prototype was tested in a previously developed MCL, and a variable level of arterial compliance was successfully produced; however, the complete range of compliance values required for accurate physiological representation was not able to be produced with this initial design. The mathematical model was then used to design a smaller physical mock circulation loop, with the tubing sizes adjusted to produce accurate pressure and flow traces whilst having an appropriate frequency response characteristic. The development of the mathematical model greatly assisted the general design of an in vitro cardiovascular device test rig, while the variable compliance chamber allowed simple and real-time manipulation of MCL compliance to allow accurate transition between a variety of physiological conditions. The newly developed MCL produced an accurate design of a mechanical representation of the human circulatory system for in vitro cardiovascular device testing and education purposes. The continued improvement of VAD test rigs is essential if VAD design is to improve, and hence improve quality of life and life expectancy for heart failure patients.
Resumo:
The construction industry is known to be an important contributor towards the gross domestic product of many countries. Moreover, the health of the construction industry is positively correlated to the economic growth of a country and in many economies public sector clients account for a major share of construction works. Given this strength, it is important for public sector clients to initiate innovations aimed at the betterment of the industry. In this context, concern about sustainable development has been a major driver of some innovative initiatives in construction industries worldwide. Furthermore, the Government of Hong Kong regards both sustainability and community development as important criteria when planning and procuring construction projects. This paper is based on a case study of a public sector development project in Hong Kong, and presents the salient features of the procurement and contractual systems adopted in the project, which foster sustainability and community development. The reported interim findings are based on a preliminary document analysis that is part of an ongoing longitudinal case study into the project. The document analysis takes a three-pronged approach in terms of how the procurement and contractual systems foster economic, environmental and social sustainability, and sums up their impact on the community as a whole.
Resumo:
Objectives: Recovery is an emerging movement in mental health. Evidence for recovery-based approaches is not well developed and approaches to implement recovery-oriented services are not well articulated. The collaborative recovery model (CRM) is presented as a model that assists clinicians to use evidence-based skills with consumers, in a manner consistent with the recovery movement. A current 5 year multisite Australian study to evaluate the effectiveness of CRM is briefly described. Conclusion: The collaborative recovery model puts into practice several aspects of policy regarding recovery-oriented services, using evidence-based practices to assist individuals who have chronic or recurring mental disorders (CRMD). It is argued that this model provides an integrative framework combining (i) evidence-based practice; (ii) manageable and modularized competencies relevant to case management and psychosocial rehabilitation contexts; and (iii) recognition of the subjective experiences of consumers.
Resumo:
The explosive growth of the World-Wide-Web and the emergence of ecommerce are the major two factors that have led to the development of recommender systems (Resnick and Varian, 1997). The main task of recommender systems is to learn from users and recommend items (e.g. information, products or books) that match the users’ personal preferences. Recommender systems have been an active research area for more than a decade. Many different techniques and systems with distinct strengths have been developed to generate better quality recommendations. One of the main factors that affect recommenders’ recommendation quality is the amount of information resources that are available to the recommenders. The main feature of the recommender systems is their ability to make personalised recommendations for different individuals. However, for many ecommerce sites, it is difficult for them to obtain sufficient knowledge about their users. Hence, the recommendations they provided to their users are often poor and not personalised. This information insufficiency problem is commonly referred to as the cold-start problem. Most existing research on recommender systems focus on developing techniques to better utilise the available information resources to achieve better recommendation quality. However, while the amount of available data and information remains insufficient, these techniques can only provide limited improvements to the overall recommendation quality. In this thesis, a novel and intuitive approach towards improving recommendation quality and alleviating the cold-start problem is attempted. This approach is enriching the information resources. It can be easily observed that when there is sufficient information and knowledge base to support recommendation making, even the simplest recommender systems can outperform the sophisticated ones with limited information resources. Two possible strategies are suggested in this thesis to achieve the proposed information enrichment for recommenders: • The first strategy suggests that information resources can be enriched by considering other information or data facets. Specifically, a taxonomy-based recommender, Hybrid Taxonomy Recommender (HTR), is presented in this thesis. HTR exploits the relationship between users’ taxonomic preferences and item preferences from the combination of the widely available product taxonomic information and the existing user rating data, and it then utilises this taxonomic preference to item preference relation to generate high quality recommendations. • The second strategy suggests that information resources can be enriched simply by obtaining information resources from other parties. In this thesis, a distributed recommender framework, Ecommerce-oriented Distributed Recommender System (EDRS), is proposed. The proposed EDRS allows multiple recommenders from different parties (i.e. organisations or ecommerce sites) to share recommendations and information resources with each other in order to improve their recommendation quality. Based on the results obtained from the experiments conducted in this thesis, the proposed systems and techniques have achieved great improvement in both making quality recommendations and alleviating the cold-start problem.