The influence of architecture on degradation and tissue ingrowth into three-dimensional poly(lactic-co-glycolic acid) scaffolds in vitro and in vivo

The in vitro and in vivo degradation properties of poly(lactic-co-glycolic acid) (PLGA) scaffolds produced by two different technologies - thermally induced phase separation (TIPS), and solvent casting and particulate leaching (SCPL) were compared. Over 6 weeks, in vitro degradation produced changes in SCPL scaffold dimension, mass, internal architecture and mechanical properties. TIPS scaffolds produced far less changes in these parameters providing significant advantages over SCPL. In vivo results were based on a microsurgically created arteriovenous (AV) loop sandwiched between two TIPS scaffolds placed in a polycarbonate chamber under rat groin skin. Histologically, a predominant foreign body giant cell response and reduced vascularity was evident in tissue ingrowth between 2 and 8 weeks in TIPS scaffolds. Tissue death occurred at 8 weeks in the smallest pores. Morphometric comparison of TIPS and SCPL scaffolds indicated slightly better tissue ingrowth but greater loss of scaffold structure in SCPL scaffolds. Although advantageous in vitro, large surface area:volume ratios and varying pore sizes in PLGA TIPS scaffolds mean that effective in vivo (AV loop) utilization will only be achieved if the foreign body response can be significantly reduced so as to allow successful vascularisation, and hence sustained tissue growth, in pores less than 300 μm. © 2005 Elsevier Ltd. All rights reserved.

Learning Landscapes 2.0: Adaptable educational environments

This project has blended two streams of enquiry: temporary and transportable construction technology, and flexible blended-learning environments. It seeks to develop prototypes for a series of environments suited for the activities of learning (future-proofed schools), as practiced in the twenty first century. The research utilises techniques of: historic survey, case study, first-hand observation, and architectural design (as research). The design comprises three major components: The determinate landscape: in-situ concrete ‘plate’ that is permanent. The indeterminate landscape: a kit of pre-fabricated 2-D panels assembled in a unique manner at each site to suit the client and context; manufactured to the principles of design-for-disassembly. The stations: pre-fabricated packages of highly-serviced space connected through the determinate landscape. This project was submitted to the ‘Future Proofing Schools’ competition (professional category) in October 2011. The competition was part of a research project supported under the Australian Research Council’s Linkage Grant funding scheme (project LP0991146).

Brisbane Airport Atelier : Team Delta

This architectural and urban design project was conducted as part of the Brisbane Airport Corporations master-planning Atelier, run in conjunction with City Lab. This creation and innovation event brought together approximately 80 designers, associated professionals, and both local and state government representatives to research concepts for future development and planning of the Brisbane airport site. The Team Delta research project explored the development of a new precinct cluster around the existing international terminal building; with a view of reinforcing the sense of place and arrival. The development zone explores the options of developing a subtropical character through landscape elements such as open plazas, tourist attractions, links to existing adjacent waterways, and localised rapid transport options. The proposal tests the possibilities of developing a cultural hub in conjunction with transport infrastructure and the airport terminal(s).

Place and displacement : southeast Queensland architecture

The "vernacular" housing tradition of southeast Queensland is easily identifiable. Its history is more complex. This study seeks to challenge two popular conceptions of the "Queenslander" history by showing that they actually provide contradictory explanations. The aim is to produce a more complex account of local architecture and its historical explanation so that both its past and its present practices can be better understood as a distinctly subtropical idiom. This discussion shows that such practices may respond to common concerns but that are also ever-changing.

Seeing a hard country : Lawrence’s Australian landscape

In 1944 Australian author Eleanor Dark wrote that Australia is a hard country for an outsider to see, citing, in evidence, the writing of the “strange, foreign-looking little man with the beard” -- the self-described by D. H. Lawrence. According to Dark, Lawrence was bewildered by Australia because what his eyes saw was not what they were accustomed to seeing. Kangaroo, she wrote, suggests one long, tormented effort to see. Lawrence appears, for Dark, to be half-blind, struggling, and irritated almost beyond belief with his visit to New South Wales. Eleanor Dark wrote this critique in 1944, long after Lawrence’s 1922 visit, but for her, as for other Australian writers, Kangaroo continued to register as an important book, even if the content rankled. Katharine Susannah Prichard and Christina Stead, both advocates in general of Lawrence, likewise rejected the tenor of Kangaroo, although Lawrence would not have been worried about the response. In 1929 he referred to his irritation with Australia in letters to P.R. “Inky” Stephensen, the Australian nationalist and publisher, and he does not seem to have changed his opinions since writing Kangaroo. Yet the novel continued to be significant for Australian writers, even if as a provocation. My discussion traces the responses of the women authors to Kangaroo, and refers to Lawrence’s letters to Stephensen, as a way of emphasizing this significance, seen especially in relation to ideas about ‘seeing’ and the Australian landscape.

'Dripping sweat: sub-tropical spaces in recent Brisbane fiction'

This paper considers the literary landscape of contemporary Brisbane and pays particular attention to the relationship between sub-tropical spaces (homes, streets, and clubs) and local writing. ‘Dripping Sweat’ proposes that within the new urban cool of Brisbane’s cultural life there is nostalgia for the sub-tropical environment that continues to intrude on contemporary fiction. The paper considers the architecture of both public and private spaces and discusses how the literary imagination re-designs contemporary Brisbane with a selective appropriation of environmental settings.

Entertainment architecture : constructing a framework for the creation of an emerging transmedia form

This thesis investigates the radically uncertain formal, business, and industrial environment of current entertainment creators. It researches how a novel communication technology, the Internet, leads to novel entertainment forms, how these lead to novel kinds of businesses that lead to novel industries; and in what way established entertainment forms, businesses, and industries are part of that process. This last aspect is addressed by focusing on one exemplary es-tablished form: movies. Using a transdisciplinary approach and a combination of historical analysis, industry interviews, and an innovative mode of ‘immersive’ textual analysis, a coherent and comprehensive conceptual framework for the creation of and re-search into a specific emerging entertainment form is proposed. That form, products based on it, and the conceptual framework describing it are all re-ferred to as Entertainment Architecture (‘entarch,’ for short). The thesis charac-terises this novel form as Internet-native transmedia entertainment, meaning it fully utilises the unique communicative characteristics of the Internet, and is spread across media. The thesis isolates four constitutive elements within Entertainment Architec-ture: story, play, ‘dance,’ and ‘glue.’ That is, entarch tells a story; offers playful interaction; invites social interaction between producer and consumer, and amongst consumers (‘dance’); and all components of it can be spread across many media, but are so well interconnected and mutually dependent that they are perceived as one product instead of many (‘glue’). This sets entarch apart from current media franchises like Star Wars or Halo, which are perceived as many products spread across many media. Entarch thus embraces the commu-nicative behaviour of Internet-native consumers instead of forcing them to de-sist from it, it harnesses the strengths of various media while avoiding some of their weaknesses, and it can sustain viable businesses. The entarch framework is an innovative contribution to scholarship that al-lows researchers to investigate this emerging entertainment form in a structured way. The thesis demonstrates this by using it to survey business models appro-priate to the entarch environment. The framework can also be used by enter-tainment creators — exemplified in the thesis by moviemakers — to delimit the room for manoeuvre available to them in a changing environment.

Measuring the realization of benefits from enterprise architecture management

Enterprise architecture management (EAM) has become an intensively discussed approach to manage enterprise transformations. While many organizations employ EAM, a notable insecurity about the value of EAM remains. In this paper, we propose a model to measure the realization of benefits from EAM. We identify EAM success factors and EAM benefits through a comprehensive literature review and eleven explorative expert interviews. Based on our findings, we integrate the EAM success factors and benefits with the established DeLone & McLean IS success model resulting in a model that explains the realization of EAM benefits. This model aids organizations as a benchmark and framework for identifying and assessing the setup of their EAM initiatives and whether and how EAM benefits are materialized. We see our model also as a first step to gain insights in and start a discussion on the theory of EAM benefit realization.

Realizing benefits from enterprise architecture : a measurement model

Enterprise architecture (EA) management has become an intensively discussed approach to manage enterprise transformations. Despite the popularity and potential of EA, both researchers and practitioners lament a lack of knowledge about the realization of benefits from EA. To determine the benefits from EA, we explore the various dimensions of EA benefit realization and report on the development of a validated and robust measurement instrument. In this paper, we test the reliability and construct validity of the EA benefit realization model (EABRM), which we have designed based on the DeLone & McLean IS success model and findings from exploratory interviews. A confirmatory factor analysis confirms the existence of an impact of five distinct and individually important dimensions on the benefits derived from EA: EA artefact quality, EA infrastructure quality, EA service quality, EA culture, and EA use. The analysis presented in this paper shows that the EA benefit realization model is an instrument that demonstrates strong reliability and validity.

Porous scaffold architecture guides tissue formation

Critical-sized bone defect regeneration is a remaining clinical concern. Numerous scaffold-based strategies are currently being investigated to enable in vivo bone defect healing. However, a deeper understanding of how a scaffold influences the tissue formation process and how this compares to endogenous bone formation or to regular fracture healing is missing. It is hypothesized that the porous scaffold architecture can serve as a guiding substrate to enable the formation of a structured fibrous network as a prerequirement for later bone formation. An ovine, tibial, 30-mm critical-sized defect is used as a model system to better understand the effect of the scaffold architecture on cell organization, fibrous tissue, and mineralized tissue formation mechanisms in vivo. Tissue regeneration patterns within two geometrically distinct macroscopic regions of a specific scaffold design, the scaffold wall and the endosteal cavity, are compared with tissue formation in an empty defect (negative control) and with cortical bone (positive control). Histology, backscattered electron imaging, scanning small-angle X-ray scattering, and nanoindentation are used to assess the morphology of fibrous and mineralized tissue, to measure the average mineral particle thickness and the degree of alignment, and to map the local elastic indentation modulus. The scaffold proves to function as a guiding substrate to the tissue formation process. It enables the arrangement of a structured fibrous tissue across the entire defect, which acts as a secondary supporting network for cells. Mineralization can then initiate along the fibrous network, resulting in bone ingrowth into a critical-sized defect, although not in complete bridging of the defect. The fibrous network morphology, which in turn is guided by the scaffold architecture, influences the microstructure of the newly formed bone. These results allow a deeper understanding of the mode of mineral tissue formation and the way this is influenced by the scaffold architecture. Copyright © 2012 American Society for Bone and Mineral Research.

Speed enforcement in Australia : a changing policy landscape shaped by public opinion

- Speeding and crash involvement in Australia - Speed management in Australia - Jurisdictional differences - National Road Safety Strategy (2011-2020) - Auditor-General reviews of speed camera programs - The role of public opinion/feedback - Implications for speed management

Anisotropy of articular cartilage reflects the ECM gradient architecture : Hough-Radon Transform Analysis

Tissue-specific extracellular matrix (ECM) is known to be an ideal bioscaffold to inspire the future of regenerative medicine. It holds the secret of how nature has developed such an organization of molecules into a unique functional complexity. This work exploited an innovative image processing algorithm and high resolution microscopy associated with mechanical analysis to establish a correlation between the gradient organization of cartiligous ECM and its anisotropic biomechanical response. This was hypothesized to be a reliable determinant that can elucidate how microarchitecture interrelates with biomechanical properties. Hough-Radon transform of the ECM cross-section images revealed its conformational variation from tangential interface down to subchondral region. As the orientation varied layer by layer, the anisotropic mechanical response deviated relatively. Although, results were in good agreement (Kendall's tau-b > 90%), there were evidences proposing that alignment of the fibrous network, specifically in middle zone, is not as random as it was previously thought.

Australian Learning and Teaching Council, Learning and Teaching Academic Standards Statement for Architecture

The development of the Learning and Teaching Academic Standards Statement for Architecture (the Statement) centred on requirements for the Master of Architecture and proceeded alongside similar developments in the building and construction discipline under the guidance and support of the Australian Deans of Built Environment and Design (ADBED). Through their representation of Australian architecture programs, ADBED have provided high-level leadership for the Learning and Teaching Academic Standards Project in Architecture (LTAS Architecture). The threshold learning outcomes (TLOs), the description of the nature and extent of the discipline, and accompanying notes were developed through wide consultation with the discipline and profession nationally. They have been considered and debated by ADBED on a number of occasions and have, in their fi nal form, been strongly endorsed by the Deans. ADBED formed the core of the Architecture Reference Group (chaired by an ADBED member) that drew together representatives of every peak organisation for the profession and discipline in Australia. The views of the architectural education community and profession have been provided both through individual submissions and the voices of a number of peak bodies. Over two hundred individuals from the practising profession, the academic workforce and the student cohort have worked together to build consensus about the capabilities expected of a graduate of an Australian Master of Architecture degree. It was critical from the outset that the Statement should embrace the wisdom of the greater ‘tribe’, should ensure that graduates of the Australian Master of Architecture were eligible for professional registration and, at the same time, should allow for scope and diversity in the shape of Australian architectural education. A consultation strategy adopted by the Discipline Scholar involved meetings and workshops in Perth, Melbourne, Sydney, Canberra and Brisbane. Stakeholders from all jurisdictions and most universities participated in the early phases of consultation through a series of workshops that concluded late in October 2010. The Draft Architecture Standards Statement was formed from these early meetings and consultation in respect of that document continued through early 2011. This publication represents the outcomes of work to establish an agreed standards statement for the Master of Architecture. Significant further work remains to ensure the alignment of professional accreditation and recognition procedures with emerging regulatory frameworks cascading from the establishment of the Tertiary Education Quality and Standards Agency (TEQSA). The Australian architecture community hopes that mechanisms can be found to integrate TEQSA’s quality assurance purpose with well-established and understood systems of professional accreditation to ensure the good standing of Australian architectural education into the future. The work to build renewed and integrated quality assurance processes and to foster the interests of this project will continue, for at least the next eighteen months, under the auspices of Australian Learning and Teaching Council (ALTC)-funded Architecture Discipline Network (ADN), led by ADBED and Queensland University of Technology. The Discipline Scholar gratefully acknowledges the generous contributions given by those in stakeholder communities to the formulation of the Statement. Professional and academic colleagues have travelled and gathered to shape the Standards Statement. Debate has been vigorous and spirited and the Statement is rich with the purpose, critical thinking and good judgement of the Australian architectural education community. The commitments made to the processes that have produced this Statement reflect a deep and abiding interest by the constituency in architectural education. This commitment bodes well for the vibrancy and productivity of the emergent Architecture Discipline Network (ADN). Endorsement, in writing, was received from the Australian Institute of Architects National Education Committee (AIA NEC): The National Education Committee (NEC) of the Australian Institute of Architects thank you for your work thus far in developing the Learning and Teaching Academic Standards for Architecture In particular, we acknowledge your close consultation with the NEC on the project along with a comprehensive cross-section of the professional and academic communities in architecture. The TLOs with the nuanced levels of capacities – to identify, develop, explain, demonstrate etc – are described at an appropriate level to be understood as minimum expectations for a Master of Architecture graduate. The Architects Accreditation Council of Australia (AACA) has noted: There is a clear correlation between the current processes for accreditation and what may be the procedures in the future following the current review. The requirement of the outcomes as outlined in the draft paper to demonstrate capability is an appropriate way of expressing the measure of whether the learning outcomes have been achieved. The measure of capability as described in the outcome statements is enhanced with explanatory descriptions in the accompanying notes.

This landscape before me

Poem