Robot control of a 3,500 tonne mining machine

The mining industry is highly suitable for the application of robotics and automation technology since the work is arduous, dangerous and often repetitive. This paper describes the development of an automation system for a physically large and complex field robotic system - a 3,500 tonne mining machine (a dragline). The major components of the system are discussed with a particular emphasis on the machine/operator interface. A very important aspect of this system is that it must work cooperatively with a human operator, seamlessly passing the control back and forth in order to achieve the main aim - increased productivity.

3D reconfigurable autopilot flight system for both general aviation and unmanned aerial systems

This research project investigated and designed a modular architecture for a 3D Reconfigurable Autopilot Flight System that could be used to control actuators in both manned and unmanned aircraft. The system is based on a CAN Bus interface and allows seamless control of different types of actuators. During the course of the research the differences and similarities of autopilots for fixed-wing general aviation aircraft and unmanned aircraft were analysed focusing on the actuator interfaces. This project suggests that software and hardware used in commercial-of-the-shelf avionics could be used in manned and unmanned aviation.

The messaging kettle: Prototyping connection over a distance between adult children and older parents

A prototype "messaging kettle" is described. The connected kettle aims to foster communication and engagement with an older friend or relative who lives remotely, during the routine of boiling the kettle. We describe preliminary encounters and findings from demonstrating a working prototype in morning tea gatherings of people in their 50s-late 70s and from introducing it into the homes of two people in their 80s who live on another continent. Key findings are that: The concept of keeping in touch around a "habituated object" such as a kettle was well received; Simple and varied interaction modalities that allow asymmetric forms of communication are needed; Designing for use across different time zones requires attention; And, that even when augmenting a habituated object, the process of introduction, appropriation and habituation still needs significant attention and investigation.

Service Interface Synthesis in Business Networks

Mismatches between services needing to interoperate have been addressed through the adaptation of structural and behavioural interfaces of services, which in practice incur long lead time through manual, coding effort. We propose a framework, complementary to con- ventional service adaptation, to synthesise service interfaces in the open setting of business networks, allowing consumers to introspect service interfaces and formulate service invocations. The framework also allows evolved service requests, as new features of service capabilities are discov- ered, through interactions with other, similar services. Finally the frame- work fosters reuse of adaptation efforts through normalisation of struc- tural and behavioural interfaces of similar services. This paper provides a first exposition of the service interface synthesis framework, describing patterns containing novel requirements for unilateral service adaptation and detailing the interface synthesis technique. Complex examples of ser- vices drawn from commercial logistic systems are then used to validate the synthesis technique and identify open challenges and future research directions.

Participatory action research for civic engagement

The future of civic engagement is characterised by both technological innovation as well as new technological user practices that are fuelled by trends towards mobile, personal devices; broadband connectivity; open data; urban interfaces; and, cloud computing. These technology trends are progressing at a rapid pace, and have led global technology vendors to package and sell the ‘Smart City’ as a centralized service delivery platform predicted to optimize and enhance cities’ key performance indicators – and generate a profitable market. The top-down deployment of these large and proprietary technology platforms have helped sectors such as energy, transport, and healthcare to increase efficiencies. However, an increasing number of scholars and commentators warn of another ‘IT bubble’ emerging. Along with some city leaders, they argue that the top-down approach does not fit the governance dynamics and values of a liberal democracy when applied across sectors. A thorough understanding is required, of the socio-cultural nuances of how people work, live, play across different environments, and how they employ social media and mobile devices to interact with, engage in, and constitute public realms. Although the term ‘slacktivism’ is sometimes used to denote a watered down version of civic engagement and activism that is reduced to clicking a ‘Like’ button and signing online petitions, we believe that we are far from witnessing another Biedermeier period that saw people focus on the domestic and the non-political. There is plenty of evidence to the contrary, such as post-election violence in Kenya in 2008, the Occupy movements in New York, Hong Kong and elsewhere, the Arab Spring, Stuttgart 21, Fukushima, the Taksim Gezi Park in Istanbul, and the Vinegar Movement in Brazil in 2013. These examples of civic action shape the dynamics of governments, and in turn, call for new processes to be incorporated into governance structures. Participatory research into these new processes across the triad of people, place and technology is a significant and timely investment to foster productive, sustainable, and livable human habitats. With this chapter, we want to reframe the current debates in academia and priorities in industry and government to allow citizens and civic actors to take their rightful centerpiece place in civic movements. This calls for new participatory approaches for co-inquiry and co-design. It is an evolving process with an explicit agenda to facilitate change, and we propose participatory action research (PAR) as an indispensable component in the journey to develop new governance infrastructures and practices for civic engagement. This chapter proposes participatory action research as a useful and fitting research paradigm to guide methodological considerations surrounding the study, design, development, and evaluation of civic technologies. We do not limit our definition of civic technologies to tools specifically designed to simply enhance government and governance, such as renewing your car registration online or casting your vote electronically on election day. Rather, we are interested in civic media and technologies that foster citizen engagement in the widest sense, and particularly the participatory design of such civic technologies that strive to involve citizens in political debate and action as well as question conventional approaches to political issues (DiSalvo, 2012; Dourish, 2010; Foth et al., 2013). Following an outline of some underlying principles and assumptions behind participatory action research, especially as it applies to cities, we will critically review case studies to illustrate the application of this approach with a view to engender robust, inclusive, and dynamic societies built on the principles of engaged liberal democracy. The rationale for this approach is an alternative to smart cities in a ‘perpetual tomorrow,’ (cf. e.g. Dourish & Bell, 2011), based on many weak and strong signals of civic actions revolving around technology seen today. It seeks to emphasize and direct attention to active citizenry over passive consumerism, human actors over human factors, culture over infrastructure, and prosperity over efficiency. First, we will have a look at some fundamental issues arising from applying simplistic smart city visions to the kind of a problem a city is (cf. Jacobs, 1961). We focus on the touch points between “the city” and its civic body, the citizens. In order to provide for meaningful civic engagement, the city must provide appropriate interfaces.

Defining the InstaBooth: Facilitating debate and content creation from situated users

Through ubiquitous computing and location-based social media, information is spreading outside the traditional domains of home and work into the urban environment. Digital technologies have changed the way people relate to the urban form supporting discussion on multiple levels, allowing more citizens to be heard in new ways (Fredericks et al. 2013; Houghton et al. 2014; Caldwell et al. 2013). Face-to-face and digitally mediated discussions, facilitated by tangible and hybrid interaction, such as multi-touch screens and media façades, are initiated through a telephone booth inspired portable structure: The InstaBooth. The InstaBooth prototype employs a multidisciplinary approach to engage local communities in a situated debate on the future of their urban environment. With it, we capture citizens’ past stories and opinions on the use and design of public places. The way public consultations are currently done often engages only a section of the population involved in a proposed development; the more vocal citizens are not necessarily the more representative of the communities (Jenkins 2006). Alternative ways to engage urban dwellers in the debate about the built environment are explored at the moment, including the use of social media or online tools (Foth 2009). This project fosters innovation by providing pathways for communities to participate in the decision making process that informs the urban form. The InstaBooth promotes dialogue and mediation between a bottom-up and a top-down approach to urban design, with the aim of promoting community connectedness with the urban environment. The InstaBooth provides an engagement and discussion platform that leverages a number of locally developed display and interaction technologies in order to facilitate a dialogue of ideas and commentary. The InstaBooth combines multiple interaction techniques into a hybrid (digital and analogue) media space. Through the InstaBooth, urban design and architectural proposals are displayed encouraging commentary from visitors. Inside the InstaBooth, visitors can activate a multi-touch screen in order to browse media, write a note, or draw a picture to provide feedback. The purpose of the InstaBooth is to engage with a broader section of society, including those who are often marginalised. The specific design of the internal and external interfaces, the mutual relationship between these interfaces with regards to information display and interaction, and the question how visitors can engage with the system, are part of the research agenda of the project.

Semi-automated annotation of environmental acoustic recordings

Environmental sensors collect massive amounts of audio data. This thesis investigates computational methods to support human analysts in identifying faunal vocalisations from that audio. A series of experiments was conducted to trial the effectiveness of novel user interfaces. This research examines the rapid scanning of spectrograms, decision support tools for users, and cleaning methods for folksonomies. Together, these investigations demonstrate that providing computational support to human analysts increases their efficiency and accuracy; this allows bioacoustics projects to efficiently utilise their valuable human analysts.

Editorial: Towards intuitive interaction theory

The Special Issue of Interacting with Computers, 2015 showcases the current state of the art in intuitive interaction research. Several papers have showcased new potential methods for both applying and assessing intuitive interaction during early and later phases of the design process. Diefenbach and Ullrich present a new, alternative framework for intuitive interaction, comprised of the four components of gut feeling, verbalizability. Fischer and colleagues paper also reported on an experiment in applying image schemas but in this case they aimed to find a more efficient way of discovering and applying them, in order to find ways to improve the design process as well as assessment of new interfaces. Still and co-researchers had a similar aim, that of establishing what levels and types of knowledge can be most easily and accurately elicited from users in order to be applied to new interfaces. Hespanhol and Tomitsch described strategies for intuitive interaction in public urban spaces. Macaranas and colleagues described an experiment which tested three different full body gestural interfaces to establish which types of mappings were more intuitive, one based on images schemas and two on different previously encountered features from other types of interfaces.

Zombies on the road: A holistic design approach to balancing gamification and safe driving

This paper explores novel driving experiences that make use of gamification and augmented reality in the car. We discuss our design considerations, which are grounded in road safety psychology and video game design theory. We aim to address the tension between safe driving practices and player engagement. Specifically, we propose a holistic, iterative thinking process inspired by game design cognition and share our insights generated through the application of this process. We present preliminary game concepts that blend digital components with physical elements from the driving environment. We further highlight how this design process helped us to iteratively evolve these concepts towards being safer while maintaining fun. These insights and game design cognition itself will be useful to the AutomotiveUI community investigating similar novel driving experiences.

A finite element modelling method for thin layer mortared masonry systems

This paper deals with a finite element modelling method for thin layer mortared masonry systems. In this method, the mortar layers including the interfaces are represented using a zero thickness interface element and the masonry units are modelled using an elasto-plastic, damaging solid element. The interface element is formulated using two regimes; i) shear-tension and ii) shearcompression. In the shear-tension regime, the failure of joint is consiedered through an eliptical failure criteria and in shear-compression it is considered through Mohr Coulomb type failure criterion. An explicit integration scheme is used in an implicit finite element framework for the formulation of the interface element. The model is calibrated with an experimental dataset from thin layer mortared masonry prism subjected to uniaxial compression, a triplet subjected to shear loads a beam subjected to flexural loads and used to predict the response of thin layer mortared masonry wallettes under orthotropic loading. The model is found to simulate the behaviour of a thin layer mortated masonry shear wall tested under pre-compression and inplane shear quite adequately. The model is shown to reproduce the failure of masonry panels under uniform biaxial state of stresses.

A genetic analysis of cortical thickness in 372 twins

Imaging genetics is a new field of neuroscience that blends methods from computational anatomy and quantitative genetics to identify genetic influences on brain structure and function. Here we analyzed brain MRI data from 372 young adult twins to identify cortical regions in which gray matter volume is influenced by genetic differences across subjects. Thickness maps, reconstructed from surface models of the cortical gray/white and gray/CSF interfaces, were smoothed with a 25 mm FWHM kernel and automatically parcellated into 34 regions of interest per hemisphere. In structural equation models fitted to volume values at each surface vertex, we computed components of variance due to additive genetic (A), shared (C) and unique (E) environmental factors, and tested their significance. Cortical regions in the vicinity of the perisylvian language cortex, and at the frontal and temporal poles, showed significant additive genetic variance, suggesting that volume measures from these regions may provide quantitative phenotypes to narrow the search for quantitative trait loci that influence brain structure.

Architecture for service profiling

Service oriented architecture is gaining momentum. However, in order to be successful, the proper and up-to-date description of services is required. Such a description may be provided by service profiling mechanisms, such as one presented in this article. Service profile can be defined as an up-to-date description of a subset of non-functional properties of a service. It allows for service comparison on the basis of non-functional parameters, and choosing the service which is most suited to the needs of a user. In this article the notion of a service profile along with service profiling mechanism is presented as well as the architecture of a profiling system. © 2006 IEEE.

The use of embodiments in distributed collaborative business process modelling

Remote networked collaboration with business model documentation has many communication problems. The aim of this project is to solve some of these communication problems by using digital 3D representations of human visual cues. Results from this project increased our understanding of the role and effects of visual cues in remote collaboration, specifically for validating business process models. Technology designs to support such cues across a distance have been proposed in this thesis with qualitative and quantitative methods of analysis being combined to analyse the impact of these cues on the communication, coordination and performance of a team collaborating remotely.

Intuitive use of tangible toys

Interfaces for children have continued to evolve in terms of complexity, with toys ranging from traditional tangible interfaces to apps with digital interfaces and hybrid toys with mixed physical and digital interfaces. However, there is limited research done to investigate their potential for intuitive use. This research study compares a tangible toy and an equivalent toy in the digital world (app) for intuitive use. Non-parametric Mann-Whitney U test results showed that the tangible toy was more intuitive than the intangible counter part. Tangible systems are less complex to use and they require less time to encode and retrieve associated knowledge to use them intuitively. They are associated with low domain transfer distance and easily discoverable features. Intangible interfaces, on the other ha nd, require greater complexity and time to encode and retrieve associated experiential knowledge. Intangibles are associated with larger domain transfer distance and undiscoverable features which affects their intuitive use. Design implications and future work are discussed, emphasising the need for investigating aspects that make tangible systems intuitive to use.

P-n junction organic photovoltaics fabricated by all solution processing

We have prepared p-n junction organic photovoltaic cells using an all solution processing method with poly(3-hexylthiophene) (P3HT) as the donor and phenyl-C 61-butyric acid methyl ester (PCBM) as the acceptor. Interdigitated donor/acceptor interface morphology was observed in the device processed with the lowest boiling point solvent for PCBM used in this study. The influences of different solvents on donor/acceptor morphology and respective device performance were investigated simultaneously. The best device obtained had characteristically rough interface morphology with a peak to valley value ∼15 nm. The device displayed a power conversion efficiency of 1.78%, an open circuit voltage (V oc) 0.44 V, a short circuit current density (J sc) 9.4 mA/cm 2 and a fill factor 43%.