Raman microscopy study of tyrolite : a multi-anion arsenate mineral

The Raman spectrum of tyrolite, CaCu5(AsO4)2(CO3)(OH) 4.6H2O, from Brixlegg, Tyrol, Austria, is reported. Comparison with copper hydroxy-arsenate and basic carbonates was used to achieve assignments of the observed bands. The AsO43- group is characterized by two υ4 modes around 433 and 480 cm-1 plus a broad band around 840 cm-1 as the υ overlapping with the υ. The υ3 mode is observed as a single band around 355 cm -1. The CO32- υ1 mode is observed around 1035 and 1088 cm-1, although this assignment is difficult because of the in-plane OH bending vibrations at similar frequencies. Two υ4 modes are assigned to the 717 and 755 cm-1 bands. The υ3 mode is present as three bands at 1431, 1463, and 1498 cm-1. A large split caused by bridging carbonates may explain the band at 1370 cm -1. The H2O bending region shows two bands at 1635 and 1667 cm-1 together with stretching modes around 3204 and 3303 cm-1, the first associated with adsorbed H2O, while the second indicates more strongly bonded H2O. Three bands around 3534, 3438, and 3379 cm -1 are assigned to OH stretching modes of the OH groups in the crystal structure. The 202, 262, 301, 524, and 534 cm-1 bands are assigned to Cu-OH bending and stretching modes, whereas the bands around 179, 202, and 217 cm-1 are ascribed to O-(Ca, Cu)-O(H) with the O(H) at much greater distance from the cation. The bands around 503, 570, and 598 cm-1 are ascribed to the Cu-O stretching modes.

Advanced numerical characterization of mono-crystalline copper with defects

Based on the embedded atom method (EAM) and molecular dynamics (MD) method, the mono-crystalline copper with different defects is investigated through tension and nanoindentation simulation. The single-crystal copper nanowire with surface defects is firstly studied through tension. For validation, the tension simulations for nanowire without defect are carried out under different temperatures and strain rates. The defects on nanowires are then systematically studied in considering different defects orientation distribution. It is found that the Young’s modulus is insensitive of surface defects and centro-plane defects. However, the yield strength and yield point show a significant decrease due to the different defects. Specially, the 〖45〗^° defect in surface and in (200) plane exerts the biggest influence to the yield strength, about 34.20% and 51.45% decrease are observed, respectively. Different defects are observed to serve as a dislocation source and different necking positions of the nanowires during tension are found. During nanoindentation simulation, dislocation is found nucleating below the contact area, but no obvious dislocation is generated around the nano-cavity. Comparing with the perfect substrate during nanoindentation, the substrate with nano-cavities emerged less dislocations, it is supposed that the nano-cavity absorbed part of the indent energy, and less plastic deformation happened in the defected substrate.

Raman spectroscopy of the multi-anion mineral mallestigite Pb3Sb5+(SO4)(AsO4)(OH)6•3H2O – a mineral of archaeological significance

Some minerals are formed which show poorly defined X-ray diffraction patterns. Vibrational spectroscopy offers one of the few methods for the assessment of the structure of the oxyanions in such minerals. Among this group of minerals is mallestigite with formula Pb3Sb5+(SO4)(AsO4)(OH)6•3H2O. The objective of this research is to determine the molecular structure of the mineral mallestigite using vibrational spectroscopy. Raman and infrared bands are attributed to the AsO43- , SO42- and water stretching vibrations. Mallestigite is a mineral formed in ancient waste dumps such as occurs at Mallestiger, Carinthia, Austria and as such is a mineral of archaeological significance.

Ad hoc innovation by users of social networks : the case of Twitter

Generic, flexible social media spaces such as Facebook and Twitter constitute an increasingly important element in our overall media repertoires. They provide a technological basis for instant and world-wide, ad hoc, many-to-many communication, and their effect on global communication patterns has already been highlighted. The short-messaging platform Twitter, for example, caters for uses ranging from interpersonal and quasi-private phatic exchanges to ‘ambient journalism’: ad hoc new reporting and dissemination as major events break. Many such uses have themselves emerged through user-driven processes: even standard Twitter conventions such as the @reply (to publicly address a fellow user) or the #hashtag(to collect related messages in an easily accessible space) are user inventions, in fact, and were incorporated into Twitter’s own infrastructure only subsequently. This demonstrates the substantial potential of social, user-led innovation in social media spaces.

The perceived importance of mall retail categories and its effect on likelihood of purchase during a recession

Recessions impact the retail sector and as such research into consumer decision making during such times is imperative. In response to this, our study takes an innovative approach to examining how the perceived importance of retail store categories in a shopping mall influences the relationship between consumers' shopping attitudes and likelihood of purchasing in those categories during a recession. The overall findings show the importance of a product category to a consumer, which is often overlooked, has a strong explanatory influence on consumer purchase intentions for that specific retail store categories in a shopping mall under recession conditions. Findings also show that for consumers’ who have altered their shopping behaviour the perceived importance of a retail store category fully mediates the relationship for: Majors, Leisure, Food Catered and Mini Majors categories, and partial mediation for Apparel. Importance has no mediating effect for: Food Retail, General Retail, Mobile Phone Services, Home wares, and Retail Services. Our study makes a key contribution to the retail management literature with the findings suggesting that redefining and articulating the importance of the value offering for specific retail store categories can help reduce the impact of changes in consumers' recessionary shopping intentions across the mall tenant mix. Such actions can then help preserve the image of the shopping mall in the minds of the consumers when the economic recovery begins.

The spatial distribution of rodent damage in Australian macadamia (Macadamia integrifolia) orchards

The Black Rat (Rattus rattus), a global pest within the macadamia production industry, causes up to 30% crop damage in Australian orchards. During early stages of production in Australia, research demonstrated the importance of non crop adjacent habitats as significant in affecting the patterns of crop damage seen throughout orchards. Where once rodent damage was limited to the outside edges of orchard blocks, growers are now reporting finding crop damage throughout entire orchards. This study therefore aims to explore the spatial patterns of rodent distribution and damage now occurring in Australian macadamia orchards. We show that rodent damage and rodent distribution in these newer production regions differ from that shown in previous Australian research. Previous Australian research has shown damage patterns which were associated with the edges of orchard blocks however this study demonstrates a more widespread damage distribution. In the current study there is no relationship between rodent damage and the orchard edge. Arboreal rodent nests were identified within these newer orchard systems, suggesting rodents are residing within the tree component of the orchard system and not dependent on adjacent non-crop habitat for shelter. Results from this study confirm that rodents have modified their nesting and foraging behaviour in newer orchards systems in Australia. We suggest that this is a response of increased and prolonged availability of macadamia nuts in newer production regions enabling populations to be maintained throughout the year. Management strategies will require modification if control is to be achieved.

Comparison and modification of car following models toward a more accurate microscopic simulation parameters reproduction

Traffic safety studies demand more than what current micro-simulation models can provide as they presume that all drivers of motor vehicles exhibit safe behaviours. Several car-following models are used in various micro-simulation models. This research compares the mainstream car following models’ capabilities of emulating precise driver behaviour parameters such as headways and Time to Collisions. The comparison firstly illustrates which model is more robust in the metric reproduction. Secondly, the study conducted a series of sensitivity tests to further explore the behaviour of each model. Based on the outcome of these two steps exploration of the models, a modified structure and parameters adjustment for each car-following model is proposed to simulate more realistic vehicle movements, particularly headways and Time to Collision, below a certain critical threshold. NGSIM vehicle trajectory data is used to evaluate the modified models performance to assess critical safety events within traffic flow. The simulation tests outcomes indicate that the proposed modified models produce better frequency of critical Time to Collision than the generic models, while the improvement on the headway is not significant. The outcome of this paper facilitates traffic safety assessment using microscopic simulation.

The use of CCTV to police public spaces : a case of big brother or big friend?

This paper considers the role of CCTV (closed circuit television) in the surveillance, policing and control of public space in urban and rural locations, specifically in relation to the use of public space by young people. The use of CCTV technology in public spaces is now an established and largely uncontested feature of everyday life in a number of countries and the assertion that they are essentially there for the protection of law abiding and consuming citizens has broadly gone unchallenged. With little or no debate in the U.K. to critique the claims made by the burgeoning security industry that CCTV protects people in the form of a ‘Big Friend’, the state at both central and local levels has endorsed the installation of CCTV apparatus across the nation. Some areas assert in their promotional material that the centre of the shopping and leisure zone is fully surveilled by cameras in order to reassure visitors that their personal safety is a matter of civic concern, with even small towns and villages expending monies on sophisticated and expensive to maintain camera systems. It is within a context of monitoring, recording and control procedures that young people’s use of public space is constructed as a threat to social order, in need of surveillance and exclusion which forms a major and contemporary feature in shaping thinking about urban and rural working class young people in the U.K. As Loader (1996) notes, young people’s claims on public space rarely gain legitimacy if ‘colliding’ with those of local residents, and Davis (1990) describes the increasing ‘militarization and destruction of public space’, while Jacobs (1965) asserts that full participation in the ‘daily life of urban streets’ is essential to the development of young people and beneficial for all who live in an area. This paper challenges the uncritical acceptance of widespread use of CCTV and identifies its oppressive and malevolent potential in forming a ‘surveillance gaze’ over young people (adapting Foucault’s ‘clinical gaze’c. 1973) which can jeopardise mental health and well being in coping with the ‘metropolis’, after Simmel, (1964).

Infrared study of the adsorption of formic acid on silica-supported copper and oxidised copper catalysts

Infrared spectra are reported of formic acid adsorbed at 300 K on a reduced copper catalyst (Cu/SiO2) and a copper surface which had been oxidised by exposure to nitrous oxide. Formic acid was weakly adsorbed on the silica support. Ligation of formic acid to the copper surface occurred only on the reduced catalyst. Dissociative adsorption resulted in the formation of unidentate formate on the oxidised catalyst. The presence of reduced copper metal instigated a rapid reorientation to a bidentate formate species.

Future of arthroplasty : registries and outcome measures

Since the inception of the first Joint Registry in Sweden in 1979, many countries including Finland, Norway, Denmark, Australia, New Zealand, Canada, Scotland, England and Wales now have more than 10 years experience and data, and are collecting data on more than 90% of the procedures performed nationally. There are also Joint Registries in Romania, Slovakia, Slovenia, Croatia, Hungary, France, Germany, Switzerland, Czech Republic, Italy, Austria and Portugal, and work is ongoing to develop a Joint Registry in the US...

A survey of control allocation methods for underwater vehicles

A control allocation system implements a function that maps the desired control forces generated by the vehicle motion controller into the commands of the different actuators. In this article, a survey of control allocation methods for over-actuated underwater vehicles is presented. The methods are applicable for both surface vessels and underwater vehicles. The paper presents a survey of control allocation methods with focus on mathematical representation and solvability of thruster allocation problems. The paper is useful for university students and engineers who want to get an overview of state-of-the art control allocation methods as well as advance methods to solve more complex problems.

Challenges for implementation of a new model of collaborative design management: Analyzing the impact of human factor

The ineffectiveness of current design processes has been well studied and has resulted in widespread calls for the evolution and development of new management processes. Even following the advent of BIM, we continue to move from one stage to another without necessarily having resolved all the issues. CAD design technology, if well handled, could have significantly raised the level of quality and efficiency of current processes, but in practice this was not fully realized. Therefore, technology alone can´t solve all the problems and the advent of BIM could result in a similar bottleneck. For a precise definition of the problem to be solved we should start by understanding what are the main current bottlenecks that have yet to be overcome by either new technologies or management processes, and the impact of human behaviour-related issues which impact the adoption and utilization of new technologies. The fragmented and dispersed nature of the AEC sector, and the huge number of small organizations that comprise it, are a major limiting factor. Several authors have addressed this issue and more recently IDDS has been defined as the highest level of achievement. However, what is written on IDDS shows an extremely ideal situation on a state to be achieved; it shows a holistic utopian proposition with the intent to create the research agenda to move towards that state. Key to IDDS is the framing of a new management model which should address the problems associated with key aspects: technology, processes, policies and people. One of the primary areas to be further studied is the process of collaborative work and understanding, together with the development of proposals to overcome the many cultural barriers that currently exist and impede the advance of new management methods. The purpose of this paper is to define and delimit problems to be solved so that it is possible to implement a new management model for a collaborative design process.

Best of breed IT strategy: an alternative to enterprise resource planning systems

Abstract - Enterprise Resource Planning (ERP) software has become the dominant strategic platform for supporting enterprise-wide business processes. However, single vendor ERP software systems have been criticised for not meeting specific organisation and industry requirements. An alternative approach ‘Best of Breed (BoB)’, integrates components of software from multiple standard package vendors, and in some cases custom components. The objective is to develop enterprise systems that are more closely aligned with the requirements of an organisation. Although this approach may not be common at present it is likely to grow in importance due to business needs and technology advances such as the componentisation of ERP software. A case study analysis of a BoB implementation at a global entertainment's company is used as a platform for the discussion of the issues associated with this strategy and a comparison is made with the single vendor ERP alternative. The analysis centres on the complexity of implementation, the differences in the levels of functionality and business fit and the maintenance requirements.

Privacy concerns and purchase of travel product online

The travel and tourism industry has come to rely heavily on information and communication technologies to facilitate relations with consumers. Compiling consumer data profiles has become easier and it is widely thought that consumers place great importance on how that data is handled by firms. Lack of trust may cause consumers to have privacy concerns and may, in turn, have an adverse impact on consumers’ willingness to purchase online. Three specific aspects of privacy that have received attention from researchers are unauthorized use of secondary data, invasion of privacy, and errors. A survey study was undertaken to examine the effects of these factors on both prior purchase of travel products via the Internet and future purchase probability. Surprisingly, no significant relationships were found to indicate that such privacy concerns affect online purchase behavior within the travel industry. Implications for managers are discussed.

Herds of methane chambers grazing bubbles

Water to air methane emissions from freshwater reservoirs can be dominated by sediment bubbling (ebullitive) events. Previous work to quantify methane bubbling from a number of Australian sub-tropical reservoirs has shown that this can contribute as much as 95% of total emissions. These bubbling events are controlled by a variety of different factors including water depth, surface and internal waves, wind seiching, atmospheric pressure changes and water levels changes. Key to quantifying the magnitude of this emission pathway is estimating both the bubbling rate as well as the areal extent of bubbling. Both bubbling rate and areal extent are seldom constant and require persistent monitoring over extended time periods before true estimates can be generated. In this paper we present a novel system for persistent monitoring of both bubbling rate and areal extent using multiple robotic surface chambers and adaptive sampling (grazing) algorithms to automate the quantification process. Individual chambers are self-propelled and guided and communicate between each other without the need for supervised control. They can maintain station at a sampling site for a desired incubation period and continuously monitor, record and report fluxes during the incubation. To exploit the methane sensor detection capabilities, the chamber can be automatically lowered to decrease the head-space and increase concentration. The grazing algorithms assign a hierarchical order to chambers within a preselected zone. Chambers then converge on the individual recording the highest 15 minute bubbling rate. Individuals maintain a specified distance apart from each other during each sampling period before all individuals are then required to move to different locations based on a sampling algorithm (systematic or adaptive) exploiting prior measurements. This system has been field tested on a large-scale subtropical reservoir, Little Nerang Dam, and over monthly timescales. Using this technique, localised bubbling zones on the water storage were found to produce over 50,000 mg m-2 d-1 and the areal extent ranged from 1.8 to 7% of the total reservoir area. The drivers behind these changes as well as lessons learnt from the system implementation are presented. This system exploits relatively cheap materials, sensing and computing and can be applied to a wide variety of aquatic and terrestrial systems.