Lateral distortional buckling tests of a new hollow flange channel beam

The LiteSteel beam (LSB) is a new hollow flange channel section developed by OneSteel Australian Tube Mills using their patented dual electric resistance welding and automated continuous roll-forming process. It has a unique geometry consisting of torsionally rigid rectangular hollow flanges and a relatively slender web. The LSBs are commonly used as flexural members in buildings. However, the LSB flexural members are subjected to lateral distortional buckling, which reduces their member moment capacities. Unlike the commonly observed lateral torsional buckling of steel beams, the lateral distortional buckling of LSBs is characterised by simultaneous lateral deflection, twist, and cross sectional change due to web distortion. An experimental study including more than 50 lateral buckling tests was therefore conducted to investigate the behaviour and strength of LSB flexural members. It included the available 13 LSB sections with spans ranging from 1200 to 4000 mm. Lateral buckling tests based on a quarter point loading were conducted using a special test rig designed to simulate the required simply supported and loading conditions accurately. Experimental moment capacities were compared with the predictions from the design rules in the Australian cold-formed steel structures standard. The new design rules in the standard were able to predict the moment capacities more accurately than previous design rules. This paper presents the details of lateral distortional buckling tests, in particular the features of the lateral buckling test rig, the results and the comparisons. It also includes the results of detailed studies into the mechanical properties and residual stresses of LSBs.

Building organizational capability through a quality assurance program within a business school and encouraging organizational culture change

This study explores organizational capability and culture change through a project developing an assurance of learning program in a business school. In order to compete internationally for high quality faculty, students, strategic partnerships and research collaborations it is essential for Universities to develop and maintain an international focus and a quality produce that predicts excellence in the student experience and graduate outcomes that meet industry needs. Developing, marketing and delivering that quality product requires an organizational strategy to which all members of the organization contribute and adhere. Now, the ability to acquire, share and utilize knowledge has become a critical organizational capability in academia as well as other industries. Traditionally the functional approach to business school structures and disparate nature of the social networks and work contact limit the sharing of knowledge between academics working in different disciplines. In this project a community of practice program was established to include academics in the development of an embedded assurance of learning program affecting more than 5000 undergraduate students and 250 academics from nine different disciplines across four schools. The primary outcome from the fully developed and implemented assurance of learning program was the five year accreditation of the business schools programs by two international accrediting bodies, EQUIS and AACSB. However this study explores a different outcome, namely the change in organizational culture and individual capabilities as academics worked together in teaching and learning teams. This study uses a survey and interviews with academics involved, through a retrospective panel design which contained an experimental group and a control group. Results offer insights into communities of practice as a means of addressing organizational capability and changes in organizational culture. Knowledge management and shared learning can achieve strategic and operational benefits equally within academia as within other industrial enterprises but it comes at a cost. Traditional structures, academics that act like individual contractors and deep divides across research, teaching and service interest served a different master and required fewer resources. Collaborative structures; fewer master categories of discrete knowledge areas; specific strategic goals; greater links between academics and industry; and the means to share learned insights will require a different approach to resourcing both the individual and the team.

Adam Smith's dinner

In 1961, the East German government erected what they claimed was an anti-capitalist barricade. In 1989, this barricade was dismantled by those whom it was supposed to keep apart: the forces it was intended to contain had overwhelmed it. In the aftermath, the victims of Stalinist oppression and the planned economy opted for radical change. Some might have hoped that they would intellectually march resolutely westwards towards the forms of social democracy that had proven so successful in their nearest neighbours – Scandinavia, Germany and Austria – and stop when they had reached a point on the political spectrum with which they felt comfortable, and which worked for them. Unfortunately, they went to the opposite end of political economy. That choice was celebrated by those theorists who wanted our own countries to move in the same direction. Eastern Europe suffered a decline of 50% in its GDP. Much earlier in 1653, Peter Stuyvesant had erected an earth and wooden wall to protect the westernmost settlement of a great commercial nation from those they imagined to be barbarians. In 1699 Stuyvesant’s barrier was dismantled by the British, who replaced it with a street named after the wall. So it came to be that one of the most inconsequential walls in history became one of history’s most famous streets. I am not sure if the Dutch had left some tulip bulbs on either side of the wall, perhaps as a reminder of capitalism’s first bubble, and an inspiration to later bubbles. However, many of the victims of the latest burst bubble are pretty keen to tear down that Wall.1 As in 1989, they want to take action against the guardians of the system that failed them. And the more they suffer, the more likely it is that they will demand radical change, and the more likely that the resulting change will go too far – as seems to have been the case in Eastern Europe after the terminal crisis of communism, and in the majority of democracies that fell in the dozen years following the Great Crash. The current reaction is so strong that some are even wondering what role there will be for markets. I was invited to address a conference in the EU Parliament last November on the topic ‘Capitalism: Quo Vadis?’, where I apologized to the international audience that the topic was posed in a dead European language because the answer to this question is not going to be determined by the west alone. The problems we have been addressing emerged in the west and have affected the rest. However, the answers will not come, solely from the west, and may even come primarily from the south and the east.

A restrike waveform predictive model for shunt capacitor bank switching with point-on-wave recommendation

Circuit-breakers (CBs) are subject to electrical stresses with restrikes during capacitor bank operation. Stresses are caused by the overvoltages across CBs, the interrupting currents and the rate of rise of recovery voltage (RRRV). Such electrical stresses also depend on the types of system grounding and the types of dielectric strength curves. The aim of this study is to demonstrate a restrike waveform predictive model for a SF6 CB that considered the types of system grounding: grounded and non-grounded and the computation accuracy comparison on the application of the cold withstand dielectric strength and the hot recovery dielectric strength curve including the POW (point-on-wave) recommendations to make an assessment of increasing the CB remaining life. The simulation of SF6 CB stresses in a typical 400 kV system was undertaken and the results in the applications are presented. The simulated restrike waveforms produced with the identified features using wavelet transform can be used for restrike diagnostic algorithm development with wavelet transform to locate a substation with breaker restrikes. This study found that the hot withstand dielectric strength curve has less magnitude than the cold withstand dielectric strength curve for restrike simulation results. Computation accuracy improved with the hot withstand dielectric strength and POW controlled switching can increase the life for a SF6 CB.

Multiple analysis of three common genetic alterations associated with thrombophilia

We have previously reported the use of a novel mini-sequencing protocol for detection of the factor V Leiden variant, the first nucleotide change (FNC) technology. This technology is based on a single nucleotide extension of a primer, which is hybridized immediately adjacent to the site of mutation. The extended nucleotide that carries a reporter molecule (fluorescein) has the power to discriminate the genotype at the site of mutation. More recently, the prothrombin 20210 and thermolabile methylene tetrahydrofolate reductase (MTHFR) 677 variants have been identified as possible risk factors associated with thrombophilia. This study describes the use of the FNC technology in a combined assay to detect factor V, prothrombin and MTHFR variants in a population of Australian blood donors, and describes the objective numerical methodology used to determine genotype cut-off values for each genetic variation. Using FNC to test 500 normal blood donors, the incidence of Factor V Leiden was 3.6% (all heterozygous), that of prothrombin 20210 was 2.8% (all heterozygous) and that of MTHFR was 10% (homozygous). The combined FNC technology offers a simple, rapid, automatable DNA-based test for the detection of these three important mutations that are associated with familial thrombophilia. (C) 2000 Lippincott Williams and Wilkins.

Use of first nucleotide change technology to determine the frequency of factor V Leiden in a population of Australian blood donors

Activated protein C resistance (APCR), the most common risk factor for venous thrombosis, is the result of a G to A base substitution at nucleotide 1691 (R506Q) in the factor V gene. Current techniques to detect the factor V Leiden mutation, such as determination of restriction length polymorphisms, do not have the capacity to screen large numbers of samples in a rapid, cost- effective test. The aim of this study was to apply the first nucleotide change (FNC) technology, to the detection of the factor V Leiden mutation. After preliminary amplification of genomic DNA by polymerase chain reaction (PCR), an allele-specific primer was hybridised to the PCR product and extended using fluorescent terminating dideoxynucleotides which were detected by colorimetric assay. Using this ELISA-based assay, the prevalence of the factor V Leiden mutation was determined in an Australian blood donor population (n = 500). A total of 18 heterozygotes were identified (3.6%) and all of these were confirmed with conventional MnlI restriction digest. No homozygotes for the variant allele were detected. We conclude from this study that the frequency of 3.6% is compatible with others published for Caucasian populations. In addition, the FNC technology shows promise as the basis for a rapid, automated DNA based test for factor V Leiden.

Diversity in action : minority group media and social change (text-only version)

This magazine, written by Melissa Giles, features three Brisbane-based media organisations: Radio 4RPH, Queensland Pride and 98.9FM. The PDF file on this website contains a text-only version of the magazine. Contact the author if you would like a copy of the text-only EPUB file or a copy of the full digital magazine with images. An audio version of the magazine is available at http://eprints.qut.edu.au/41729/

The ecological dynamics of decision-making in sailing

Competitive sailing is characterised by continuous interdependencies of decisions and actions. All actions imply a permanent monitoring of the environmental conditions, such as intensity and direction of the wind, sea characteristics, and the behaviour of the opponent sailors. These constraints on sailors’ behavior are in constant change implying continuous adjustments in sailors’ actions and decisions. Among the different parts of a regatta, tactics and strategy at the start are particularly relevant. Among coaches there is an adage that says that “the start is 50% of a regatta” (Houghton, 1984; Saltonstall, 1983/1986). Olympic sailing regattas are performed with boats of the same class, by one, two or three sailors, depending on the boat class. Normally before the start, sailors visit the racing venue and analyse wind and sea characteristics, in order to fine- tune their boats accordingly. Then, five minutes before the start, sailors initiate starting procedures in order to be in a favourable position at the starting line (at the “second zero”). This position is selected during the start period according to wind shifts tendencies and the actions of other boats (Figure 11.1). Only after the start signal can the boats cross the imaginary starting line between the race committee signal boat “A” and the pin end boat. The start takes place against the wind (upwind), and the boats start racing in the direction of mark 1. Based on the evaluation of the sea and wind characteristics (e.g. if the wind is stronger at a particular place on the course), sailors re- adjust their strategy for the regatta. This strategy may change during the regatta, according to wind changes and adversary actions. More to the point, strategic decisions constrain and are constrained by on- line decisions during the regatta.