WaterFieldWork : a working lexicon for critical refugia in arid landscapes

Algebuckina Waterhole exists as a permanent waterhole near a north-south dirt road and an old trainline on the Oodnadatta Track - lines that once opened up the arid lands of central South Australia but are now bypassed. It also exists as the final and largest freshwater waterhole at the end of the Neales River system. It is a critical biodiversity site, a cultural place and a working environment. It is seen to need a resilient management plan that encompasses diverse interests and impacts. Its managers sense that the theories and practices emerging out of landscape disciplinary systems may be of help. Work-in-progress research towards a management methodology are presented through posing scenarios on how landscape thinking and design, informed by an emergent textual and visual lexicon for water landscapes, can intersect with scientific fieldwork to produce useful and transferable outcomes for Algebuckina.

Effects of reduced contrast on the perception and control of speed when driving

Misperception of speed under low-contrast conditions has been identified as a possible contributor to motor vehicle crashes in fog. To test this hypothesis, we investigated the effects of reduced contrast on drivers’ perception and control of speed while driving under real-world conditions. Fourteen participants drove around a 2.85 km closed road course under three visual conditions: clear view and with two levels of reduced contrast created by diffusing filters on the windscreen and side windows. Three dependent measures were obtained, without view of the speedometer, on separate laps around the road course: verbal estimates of speed; adjustment of speed to instructed levels (25 to 70 km h-1); and estimation of minimum stopping distance. The results showed that drivers traveled more slowly under low-contrast conditions. Reduced contrast had little or no effect on either verbal judgments of speed or estimates of minimum stopping distance. Speed adjustments were significantly slower under low-contrast than clear conditions, indicating that, contrary to studies of object motion, drivers perceived themselves to be traveling faster under conditions of reduced contrast. Under real-world driving conditions, drivers’ ability to perceive and control their speed was not adversely affected by large variations in the contrast of their surroundings. These findings suggest that perceptions of self-motion and object motion involve neural processes that are differentially affected by variations in stimulus contrast as encountered in fog.

Development of an online condition monitoring system for slow speed machinery

One of the main challenges of slow speed machinery condition monitoring is that the energy generated from an incipient defect is too weak to be detected by traditional vibration measurements due to its low impact energy. Acoustic emission (AE) measurement is an alternative for this as it has the ability to detect crack initiations or rubbing between moving surfaces. However, AE measurement requires high sampling frequency and consequently huge amount of data are obtained to be processed. It also requires expensive hardware to capture those data, storage and involves signal processing techniques to retrieve valuable information on the state of the machine. AE signal has been utilised for early detection of defects in bearings and gears. This paper presents an online condition monitoring (CM) system for slow speed machinery, which attempts to overcome those challenges. The system incorporates relevant signal processing techniques for slow speed CM which include noise removal techniques to enhance the signal-to-noise and peak-holding down sampling to reduce the burden of massive data handling. The analysis software works under Labview environment, which enables online remote control of data acquisition, real-time analysis, offline analysis and diagnostic trending. The system has been fully implemented on a site machine and contributing significantly to improve the maintenance efficiency and provide a safer and reliable operation.

An analysis of the variability in Queensland WiM data

The Queensland Department of Main Roads uses Weigh-in-Motion (WiM) devices to covertly monitor (at highway speed) axle mass, axle configurations and speed of heavy vehicles on the road network. Such data is critical for the planning and design of the road network. Some of the data appears excessively variable. The current work considers the nature, magnitude and possible causes of WiM data variability. Over fifty possible causes of variation in WiM data have been identified in the literature. Data exploration has highlighted five basic types of variability specifically: ----- • cycling, both diurnal and annual;----- • consistent but unreasonable data;----- • data jumps;----- • variations between data from opposite sides of the one road; and ----- • non-systematic variations.----- This work is part of wider research into procedures to eliminate or mitigate the influence of WiM data variability.

Children re-read and re-write their neighborhoods : critical literacies and identity work

This chapter considers the complex literate repertoires of 21st century children in multicultural primary classrooms in Adelaide South Australia. It draws on the curricular and pedagogical work of two experienced primary school teachers who explore culture, race and class, by positioning children as textual producers across a variety of media. In particular we discuss two child-authored texts – A is for Arndale – a local alphabet book co-authored by children aged between eight and ten, and – Cooking Afghani Style - a magazine style film produced by a multi-aged class of children (aged eight to thirteen) recently arrived in Australia. In the process of making these texts, primary children engaged in reading as a cultural practice – re-reading and re-writing their neighbourhoods and identities (both individual and collective). This involved frequent excursions to local key sites, both familiar and unfamiliar to the children. They investigated how diverse children experienced and lived their lives in particular places within changing communities.

Critical literacies in place : teachers who work for just and sustainable communities

This chapter draws upon theories of social justice, critical literacy and place-based pedagogies and two research projects to discuss how teachers are working ethically and creatively towards a sustainable and just society in their place(s).

Critical reading comprehension in an era of accountability

This paper argues for the need for critical reading comprehension in an era of accountability that often promotes reading comprehension as readily assessable through students answering multiple choice questions of unseen texts. Based upon a 1 year study investigating literacy in Years 4–9 the ways strong-performing primary schools develop serious and in-depth reading for learning are explored. School and teacher features which allow for the development of sophisticated pedagogical repertoires and space for critical reading comprehension, without losing the complexity of curriculum offerings, are outlined. How one experienced middle primary teacher operates strategically, ethically and critically in supporting her ESL students to learn to read is illustrated. The teacher’s work is situated within the complex accountability demands faced by classroom teachers. This was accomplished by a teacher whose pedagogical repertoire has been assembled across a career teaching in low-SES high ESL communities in a school with a balanced literacy program and high level of collegial support. Risks for schools and teachers whose circumstances work against their capacities for prioritisation and strategic decision-making are identified and discussed.

Modeling circulation of train-set with multiple routing

Planning on utilization of train-set is one of the key tasks of transport organization for passenger dedicated railway in China. It also has strong relationships with timetable scheduling and operation plans at a station. To execute such a task in a railway hub pooling multiple railway lines, the characteristics of multiple routing for train-set is discussed in term of semicircle of train-sets' turnover. In programming the described problem, the minimum dwell time is selected as the objectives with special derive constraints of the train-set's dispatch, the connecting conditions, the principle of uniqueness for train-sets, and the first plus for connection in the same direction based on time tolerance σ. A compact connection algorithm based on time tolerance is then designed. The feasibility of the model and the algorithm is proved by the case study. The result indicates that the circulation model and algorithm about multiple routing can deal with the connections between the train-sets of multiple directions, and reduce the train's pulling in or leaving impact on the station's throat.

Microscopic modelling of freeway operations

Freeways are divided roadways designed to facilitate the uninterrupted movement of motor vehicles. However, many freeways now experience demand flows in excess of capacity, leading to recurrent congestion. The Highway Capacity Manual (TRB, 1994) uses empirical macroscopic relationships between speed, flow and density to quantify freeway operations and performance. Capacity may be predicted as the maximum uncongested flow achievable. Although they are effective tools for design and analysis, macroscopic models lack an understanding of the nature of processes taking place in the system. Szwed and Smith (1972, 1974) and Makigami and Matsuo (1990) have shown that microscopic modelling is also applicable to freeway operations. Such models facilitate an understanding of the processes whilst providing for the assessment of performance, through measures of capacity and delay. However, these models are limited to only a few circumstances. The aim of this study was to produce more comprehensive and practical microscopic models. These models were required to accurately portray the mechanisms of freeway operations at the specific locations under consideration. The models needed to be able to be calibrated using data acquired at these locations. The output of the models needed to be able to be validated with data acquired at these sites. Therefore, the outputs should be truly descriptive of the performance of the facility. A theoretical basis needed to underlie the form of these models, rather than empiricism, which is the case for the macroscopic models currently used. And the models needed to be adaptable to variable operating conditions, so that they may be applied, where possible, to other similar systems and facilities. It was not possible to produce a stand-alone model which is applicable to all facilities and locations, in this single study, however the scene has been set for the application of the models to a much broader range of operating conditions. Opportunities for further development of the models were identified, and procedures provided for the calibration and validation of the models to a wide range of conditions. The models developed, do however, have limitations in their applicability. Only uncongested operations were studied and represented. Driver behaviour in Brisbane was applied to the models. Different mechanisms are likely in other locations due to variability in road rules and driving cultures. Not all manoeuvres evident were modelled. Some unusual manoeuvres were considered unwarranted to model. However the models developed contain the principal processes of freeway operations, merging and lane changing. Gap acceptance theory was applied to these critical operations to assess freeway performance. Gap acceptance theory was found to be applicable to merging, however the major stream, the kerb lane traffic, exercises only a limited priority over the minor stream, the on-ramp traffic. Theory was established to account for this activity. Kerb lane drivers were also found to change to the median lane where possible, to assist coincident mergers. The net limited priority model accounts for this by predicting a reduced major stream flow rate, which excludes lane changers. Cowan's M3 model as calibrated for both streams. On-ramp and total upstream flow are required as input. Relationships between proportion of headways greater than 1 s and flow differed for on-ramps where traffic leaves signalised intersections and unsignalised intersections. Constant departure onramp metering was also modelled. Minimum follow-on times of 1 to 1.2 s were calibrated. Critical gaps were shown to lie between the minimum follow-on time, and the sum of the minimum follow-on time and the 1 s minimum headway. Limited priority capacity and other boundary relationships were established by Troutbeck (1995). The minimum average minor stream delay and corresponding proportion of drivers delayed were quantified theoretically in this study. A simulation model was constructed to predict intermediate minor and major stream delays across all minor and major stream flows. Pseudo-empirical relationships were established to predict average delays. Major stream average delays are limited to 0.5 s, insignificant compared with minor stream delay, which reach infinity at capacity. Minor stream delays were shown to be less when unsignalised intersections are located upstream of on-ramps than signalised intersections, and less still when ramp metering is installed. Smaller delays correspond to improved merge area performance. A more tangible performance measure, the distribution of distances required to merge, was established by including design speeds. This distribution can be measured to validate the model. Merging probabilities can be predicted for given taper lengths, a most useful performance measure. This model was also shown to be applicable to lane changing. Tolerable limits to merging probabilities require calibration. From these, practical capacities can be estimated. Further calibration is required of traffic inputs, critical gap and minimum follow-on time, for both merging and lane changing. A general relationship to predict proportion of drivers delayed requires development. These models can then be used to complement existing macroscopic models to assess performance, and provide further insight into the nature of operations.

Modeling object identification and tracking errors on image-based safety assessment of earthmoving operations

Object identification and tracking have become critical for automated on-site construction safety assessment. The primary objective of this paper is to present the development of a testbed to analyze the impact of object identification and tracking errors caused by data collection devices and algorithms used for safety assessment. The testbed models workspaces for earthmoving operations and simulates safety-related violations, including speed limit violations, access violations to dangerous areas, and close proximity violations between heavy machinery. Three different cases were analyzed based on actual earthmoving operations conducted at a limestone quarry. Using the testbed, the impacts of device and algorithm errors were investigated for safety planning purposes.

Critical literacy : foundational notes

This article traces the lineage of critical literacy from Freire through critical pedagogies and discourse analysis. It discusses the need for a contingent definition of critical literacy, given the increasingly sophisticated nature of texts and discourses.

Critical literacy finds a "Place": Writing and social action in a low-income Australian grade 2/3 classroom

In a study of socioeconomically disadvantaged children's acquisition of school literacies, a university research team investigated how a group of teachers negotiated critical literacies and explored notions of social power with elementary children in a suburban school located in an area of high poverty. Here we focus on a grade 2/3 classroom where the teacher and children became involved in a local urban renewal project and on how in the process the children wrote about place and power. Using the students' concerns about their neighborhood, the teacher engaged her class in a critical literacy project that not only involved a complex set of literate practices but also taught the children about power and the possibilities for local civic action. In particular, we discuss examples of children's drawing and writing about their neighborhoods and their lives. We explore how children's writing and drawing might be key elements in developing "critical literacies" in elementary school settings. We consider how such classroom writing can be a mediator of emotions, intellectual and academic learning, social practice, and political activism.

Train schedule coordination at an interchange station through Agent negotiation

In open railway markets, coordinating train schedules at an interchange station requires negotiation between two independent train operating companies to resolve their operational conflicts. This paper models the stakeholders as software agents and proposes an agent negotiation model to study their interaction. Three negotiation strategies have been devised to represent the possible objectives of the stakeholders, and they determine the behavior in proposing offers to the proponent. Empirical simulation results confirm that the use of the proposed negotiation strategies lead to outcomes that are consistent with the objectives of the stakeholders.

Bicycle helmet research : CARRS-Q monograph 5

Recent research on bicycle helmets and concerns about how public bicycle hire schemes will function in the context of compulsory helmet wearing laws have drawn media attention. This monograph presents the results of research commissioned by the Queensland Department of Transport and Main Roads to review the national and international literature regarding the health outcomes of cycling and bicycle helmets and examine crash and hospital data. It also includes critical examinations of the methodology used by Voukelatos and Rissel (2010), and estimates the likely effects of possible segmented approaches to bicycle helmet wearing legislation. The research concludes that current bicycle helmet wearing rates are halving the number of head injuries experienced by Queensland cyclists. Helmet wearing legislation discouraged people from cycling when it was first introduced but there is little evidence that it continues to do so. Cycling has significant health benefits and should be encouraged in ways that reduce the risk of the most serious injuries. Infrastructure and speed management approaches to improving the safety of cycling should be undertaken as part of a Safe System approach, but protection of the individual by simple and cost-effective methods such as bicycle helmets should also be part of an overall package of measures.