International students in Australian universities : gap between student expectations and realities

Australian Universities are very successful in attracting large number of international students. A large proportion of University revenue comes from the full fee paying international students. However, there have been many reports that international students face numerous problems when they arrive in Australia. The common management practice is to provide support staff services to deal with the orientation and welfare of international students. Such service units act as intermediaries between the students and the teaching and learning community of the university. However, the actual experience of international students may be difficult for support staff, counsellors, advisers and academic staff to anticipate. There is little information on the actual experience of students relative to their expectations. This study aimed at securing a deeper understanding of the contextually relevant issues facing by international students in Australian universities in order to develop management strategies aimed at improved teaching and learning outcomes for international students. Using a highly reliable survey questionnaire, a questionnaire survey was conducted among the international students at Queensland University of Technology (QUT), Brisbane, Australia. About 180 engineering students responded in the survey resulting in a response rate of 81%. Results indicate that international students face many difficulties including understanding colloquial language, Australian accent, cost of tuition, feelin isolation, safety, security, health services, accommodation and part time jobs. They also face difficulty in coping with learning methods in Australia, particularly in research report writing. However, they are happy with their lecturers and find them very helpful. Many of the students lacked the information regarding various community groups, recreational and sports facilities in Australia before arriving. Findings of the study show that there is a significant gap between the expectation of the students before coming to Australia and actual experience they experience here. Importantly, there is a lack of coordination between international students, international student services (ISS) and university management and as a consequence there have been little improvement in conditions. There is no direct link between student experience and University management. Many important suggestions arisen from this study and most important suggestion is that the student information system should be integrated with the University enterprise resource planning (ERP) to reduce the huge gap between international student expectation and actual experiences.

Virtual communities as tools to support teaching practicum

The impact of Web 2.0 and social networking tools such as virtual communities, on education has been much commented on. The challenge for teachers is to embrace these new social networking tools and apply them to new educational contexts. The increasingly digitally-abled student cohorts and the need for educational applications of Web 2.0 are challenges that overwhelm many educators. This chapter will make three important contributions. Firstly it will explore the characteristics and behaviours of digitally-abled students enrolled in higher education. An innovation of this chapter will be the appli- cation of Bourdieu’s notions of capital, particularly social, cultural and digital capital to understand these characteristics. Secondly, it will present a possible use of a commonly used virtual community, Facebook©. Finally it will offer some advice for educators who are interested in using popular social networking communities, similar to Facebook©, in their teaching and learning.

It really is black and white when you look at it like this : reporting on a study into Australian professors' research and teaching priorities

Despite optimistic claims about the research-teaching nexus, Australian academics still face tension between research and teaching. The teaching and research priorities, beliefs and behaviours of 70 Professorial and Associate Professorial academics in Science, Information Technology and Engineering were examined in this study. The academics from 4 faculties in 3 Australian universities, were asked to rank 16 research activities and 16 matched learning and teaching (L&T) activities from each of three perspectives: job satisfaction, leadership behaviour, and perceptions of professional importance. The findings, which were remarkably consistent across the three universities, were unequivocally in favour of Research. The only L&T activity that was ranked consistently well was “Improving student satisfaction ratings for Teaching”. The data demonstrates that Australian government and university initiatives to raise the status of L&T activity are not impacting significantly on Australia’s future leaders of university learning.

Towards improvement of autonomous glider navigation accuracy through the use of regional ocean models

Autonomous underwater gliders are robust and widely-used ocean sampling platforms that are characterized by their endurance, and are one of the best approaches to gather subsurface data at the appropriate spatial resolution to advance our knowledge of the ocean environment. Gliders generally do not employ sophisticated sensors for underwater localization, but instead dead-reckon between set waypoints. Thus, these vehicles are subject to large positional errors between prescribed and actual surfacing locations. Here, we investigate the implementation of a large-scale, regional ocean model into the trajectory design for autonomous gliders to improve their navigational accuracy. We compute the dead-reckoning error for our Slocum gliders, and compare this to the average positional error recorded from multiple deployments conducted over the past year. We then compare trajectory plans computed on-board the vehicle during recent deployments to our prediction-based trajectory plans for 140 surfacing occurrences.

Shijiazhuang ecological landscape planning and design comprehensive improvement program for the Hutuo River

International practice-led design research in landscape architecture has identified water quality and water availability as two of the most important environmental issues in developing countries. China is particularly focused on improving water supplies for its rural and urban populations. However a significant gap in knowledge exists between urban planning and environmental engineering in China as to how to design Chinese public open spaces to reduce water pollution in urban rivers. This project responded to traditional zoning methods in Shijiazhuang City, Hebei Province, by proposing a range of water sensitive design innovations from lake construction to planting design to modify standardised engineering solutions in a Chinese context.

Improvement through people for the emerging new work practices in manufacturing

This paper describes the changes occurring in manufacturing industries and their effect on knowledge and skills necessary to perform effectively in the new environments. The changes in knowledge and skills are presented as a summary to illustrate the extent of the change. The concept of multiskilling is used to conceptualise the emerging new knowledge and skills and finally some guidelines for designing training programs to acquire multiskilling are presented.

Diffusion of business improvement processes in manufacturing companies in India

Manufacturing organisations spend more on Business Process Improvement initiatives to make them more competitive in growing global market. This paper presents a Rapid Improvement Workshop (RIW) framework which companies can used to identify the critical factors regulating the diffusion of business process improvement in their company. The framework can then be used address how process improvement can be efficiently implemented. We use the results from case studies at Caterpillar India. The paper identifies the critical factors that contribute to the successful implementation of process improvement programs in manufacturing organisations. We further identify certain technological and cultural barriers to the implementation of process improvement programs and how Indian manufacturing companies can overcome these barriers to attain competitive advantage in the global markets.

The identification of Malaysian contractor satisfaction dimensions : a strategy for continuous improvement

The unique characteristics of the construction industry - such as the fragmentation of its processes, varied scope of works and diversity of its participants - are contributory factors to poor project performance. Several issues are unresolved due to the lack of a comprehensive technique to measure project outcomes including: inefficient decision making, insufficient communication, uncertain site conditions, a continuously changing environment, inharmonious working relationships, mismatched objectives within the project team and a blame culture. One approach to overcoming these problems appears to be to measure performance by gauging contractor satisfaction (Co-S) levels, but this has not been widely investigated as yet. Additionally, the key Co-S dimensions at the project level are still not fully identified. ----- ----- This paper concerns a study of satisfaction dimensions, primarily by a postal questionnaire survey of construction contractors registered by the Malaysian Construction Industry Development Board (CIDB). Eight satisfaction dimensions are identified that are significantly and substantially relate to these contractors - comprising: project cost performance, schedule performance, product performance, design satisfaction, site safety, project profitability, business performance and relationships between participants. -Each of these dimensions is accorded different priority levels of satisfaction by different contractors. ----- ----- The output of this study will be useful in raising the awareness and understanding of project teams regarding contractors’ needs, mutual objectives and open communication to help to deliver a successful project.

Shifting the technology context : career-change entrants’ transition into teaching

Becoming a teacher in technology-rich classrooms is a complex and challenging transition for career-change entrants. Those with generic or specialist Information and Communication Technology (ICT) expertise bring a mindset about purposeful uses of ICT that enrich student learning and school communities. The transition process from a non-education environment is both enhanced and constrained by shifting the technology context of generic or specialist ICT expertise, developed through a former career as well as general life experience. In developing an understanding of the complexity of classrooms and creating a learner centred way of working, perceptions about learners and learning evolve and shift. Shifts in thinking about how ICT expertise supports learners and enhances learning preceded shifts in perceptions about being a teacher, working with colleagues, and functioning in schools that have varying degrees of intensity and impact on evolving professional identities. Current teacher education and school induction programs are seen to be falling short of meeting the needs of career-change entrants and, as a flow on, the students they nurture. Research (see, for example, Tigchelaar, Brouwer, & Korthagen, 2008; Williams & Forgasz, 2009) highlights the value of generic and specialist expertise career-change teachers bring to the profession and draws attention to the challenges such expertise begets (Anthony & Ord, 2008; Priyadharshini & Robinson-Pant, 2003). As such, the study described in this thesis investigated perceptions of career-change entrants, who have generic (Mishra & Koehler, 2006) or specialist expertise, that is, ICT qualifications and work experience in the use of ICT. The career-change entrants‘ perceptions were sought as they shifted the technology context and transitioned into teaching in technology-rich classrooms. The research involved an interpretive analysis of qualitative data and quantitative data. The study used the explanatory case study (Yin, 1994) methodology enriched through grounded theory processes (Strauss & Corbin, 1998), to develop a theory about professional identity transition from the perceptions of the participants in the study. The study provided insights into the expertise and experiences of career change entrants, particularly in relation to how professional identities that include generic and specialist ICT knowledge and expertise were reconfigured while transitioning into the teaching profession. This thesis presents the Professional Identity Transition Theory that encapsulates perceptions about teaching in technology-rich classrooms amongst a selection of the increasing number of career-change entrants. The theory, grounded in the data, (Strauss & Corbin, 1998) proposes that career-change entrants experience transition phases of varying intensity that impact on professional identity, retention and development as a teacher. These phases are linked to a shift in perceptions rather than time as a teacher. Generic and specialist expertise in the use of ICT is a weight of the past and an asset that makes the transition process more challenging for career-change entrants. The study showed that career-change entrants used their experiences and perceptions to develop a way of working in a school community. Their way of working initially had an adaptive orientation focussed on immediate needs as their teaching practice developed. Following a shift of thinking, more generative ways of working focussed on the future emerged to enable continual enhancement and development of practice. Sustaining such learning is a personal, school and systemic challenge for the teaching profession.

Teaching sustainability : vehicle or endpoint?

In 2006, the Faculty of Built Environment and Engineering introduced the first faculty wide unit dedicated to sustainability at any Australian University. BEB200 Introducing Sustainability has semester enrolments of up to 1500 students. Instruments such as lectures, readings, field visits, group projects and structured tutorial activities are used and have evolved over the last five years in response to student and staff feedback and attempts to better engage students. More than seventy staff have taught in the unit, which is in its final offering in this form in 2010. This paper reflects on the experiences of five academics who have played key roles in the development and teaching of this unit over the last five years. They argue that sustainability is a paradigm that allows students to explore other ways of knowing as they engage with issues in a complex world, not an end in itself. From the students’ perspective, grappling with such issues enables them to move towards a context in which they can understand their own discipline and its role in the contradictory and rapidly changing professional world. Insights are offered into how sustainability units may be developed in the future.

Experiencing higher degree research supervision as teaching

This article describes research higher degree supervisors’ experiences of supervision as a teaching and learning practice. While research education is considered central to the HDR experience, comparatively little is known to date of the pedagogical lenses adopted by supervisors as they go about their supervision. We worked with 35 supervisors engaged in discipline-specific and interdisciplinary research across architectural design, science, engineering, computer science, information systems and librarianship. Several of these supervisors conducted projects which interfaced with the social sciences and humanities. The pedagogies, constructed through the discussions and phenomenographic analysis, offer a picture of supervisors’ collective awareness of supervision as a teaching and learning practice. Supervision as a teaching and learning practice was experienced as: Promoting the supervisor’s development, Imparting academic expertise, Upholding academic standards, Promoting learning to research, Drawing upon student expertise, Enabling student development, Venturing into unexplored territory, Forming productive communities, and Contributing to society.

High-challenge teaching for senior English as an Additional Language (EAL) learners in times of change

This paper will present a brief overview of the recent shifts within English and EAL/D (English as an additional language/dialect) curriculum documents and their focus on critical literacy, using the Queensland context as a case in point. The English syllabus landscape in Queensland has continued to morph in recent years. From 2002 to 2009, teachers of senior English and English as an Additional Language (EAL/D) have witnessed no less than four separate syllabus documents that impact on their daily work. The Australian Curriculum, when finally implemented, will also require teachers to navigate and grapple with its particular obligations and affordances. The combined effect of the shifts and tensions between recent policy documents has led to confusion about exactly how to cater for EAL/D learners in mainstream English. We discuss the possible effects of this on teachers as the agents of policy implementation and argue that in spite of such contradictions, EAL/D teachers can productively use syllabus frameworks to craft pedagogy to cater for their EAL/D learners’ language and literacy needs. Following this, we present aspects of the teaching practice of four teachers of senior EAL/D, who provide intellectually-engaging, critical literacy pedagogy that takes into account the language proficiency level of their learners, within the required curriculum. Such practice provides teachers with valuable pedagogic possibilities to meet EAL/D learners’ needs within continually varying policy terrain.

Pedunculopontine nucleus deep brain stimulation produces sustained improvement in primary progressive freezing of gait

Objective: To assess the efficacy of bilateral pedunculopontine nucleus (PPN) deep brain stimulation (DBS) as a treatment for primary progressive freezing of gait (PPFG). ------ ----- Methods: A patient with PPFG underwent bilateral PPN-DBS and was followed clinically for over 14 months. ------ ----- Results: The PPFG patient exhibited a robust improvement in gait and posture following PPN-DBS. When PPN stimulation was deactivated, postural stability and gait skills declined to pre-DBS levels, and fluoro-2-deoxy-d-glucose positron emission tomography revealed hypoactive cerebellar and brainstem regions, which significantly normalised when PPN stimulation was reactivated. ------ ----- Conclusions: This case demonstrates that the advantages of PPN-DBS may not be limited to addressing freezing of gait (FOG) in idiopathic Parkinson's disease. The PPN may also be an effective DBS target to address other forms of central gait failure.

Integrating a sustainable academic career around scholarly learning and teaching activities

To be scholarly in learning and teaching is rigorous academic work. It demands: currency and command of both discipline subject matter and educational theory; inquiring, methodical, and reflective approaches; the collection, evaluation and documentation of evidence of learning and teaching efficacy; and, optimally, entails participation in and communication among a community of teaching professionals. This chapter examines the author’s own practice in this regard to explicate the ‘how’ and ‘why’ of scholarly and scholarship approaches, as much as the ‘what’ and ‘where’ of that endeavour. In doing so, this meta‐analysis is made ‘community property’, in the same way that Shulman (1993: 6) exhorted we ‘change the status of teaching from private to community property’ so that teaching might be more greatly valued in the academy.

Strength improvement methods for back to back Litesteel beams

LiteSteel Beam (LSB) is a new cold-formed steel beam produced by OneSteel Australian Tube Mills (OATM). The new beam is effectively a channel section with two rectangular hollow flanges and a slender web, and is manufactured using patented dual electric resistance welding and automated roll-forming technologies. OATM is promoting the use of LSBs as flexural members in residential construction. When LSBs are used as back to back built-up sections, they are likely to improve their moment capacity. However, the research project conducted on the flexural behaviour of back to back built-up LSBs showed that the detrimental effects of lateral distortional buckling in single LSB members appear to remain with back to back built-up LSB members. The ultimate moment capacity of back to back LSB member is also affected by lateral distortional buckling failure. Therefore an investigation was conducted with an aim to develop suitable strength improvement methods, which are likely to mitigate lateral distortional buckling effects and hence improve the flexural strengths of back to back LSB members. This paper presents the details of this investigation, the results and recommendations for the most suitable and cost-effective method, which significantly improves the moment capacities of back to back LSB members.