The mouse model of Chlamydia genital tract infection: a review of infection, disease, immunity and vaccine development

Chlamydia trachomatis is the most common sexually transmitted bacterial infection worldwide. The impact of this pathogen on human reproduction has intensified research efforts to better understand chlamydial infection and pathogenesis. Whilst there are animal models available that mimic the many aspects of human chlamydial infection, the mouse is regarded as the most practical and widely used of the models. Studies in mice have greatly contributed to our understanding of the host-pathogen interaction and provided an excellent medium for evaluating vaccines. Here we explore the advantages and disadvantages of all animal models of chlamydial genital tract infection, with a focus on the murine model and what we have learnt from it so far.

Improved rural health through a collaborative model of care – qualitative findings

INTRODUCTION Health disparity between urban and rural regions in Australia is well-documented. In the Wheatbelt catchments of Western Australia there is higher incidence and rate of avoidable hospitalisation for chronic diseases. Structured care approach to chronic illnesses is not new but the focus has been on single disease state. A recent ARC Discovery Project on general practice nurse-led chronic disease management of diabetes, hypertension and stable ischaemic heart disease reported improved communication and better medical administration.[1] In our study we investigated the sustainability of such a multi-morbidities general practice –led collaborative model of care in rural Australia. METHODS A QUAN(qual) design was utilised. Eight pairs of rural general practices were matched. Inclusion criteria used were >18 years and capable of giving informed consent, at least one identified risk factor or diagnosed with chronic conditions. Patients were excluded if deemed medically unsuitable. A comprehensive care plan was formulated by the respective general practice nurse in consultation with the treating General Practitioner (GP) and patient based on the individual’s readiness to change, and was informed by available local resource. A case management approach was utilised. Shediaz-Rizkallah and Lee’s conceptual framework on sustainability informed our evaluation.[2] Our primary outcome on measures of sustainability was reduction in avoidable hospitalisation. Secondary outcomes were patients and practitioners acceptance and satisfaction, and changes to pre-determined interim clinical and process outcomes. RESULTS The qualitative interviews highlighted the community preference for a ‘sustainable’ local hospital in addition to general practice. Costs, ease of access, low prioritisation of self chronic care, workforce turnover and perception of losing another local resource if underutilised influenced the respondents’ decision to present at local hospital for avoidable chronic diseases regardless. CONCLUSIONS Despite the pragmatic nature of rural general practice in Australia, the sustainability of chronic multi-morbidities management in general practice require efficient integration of primary-secondary health care and consideration of other social determinants of health. What this study adds: What is already known on this subject: Structured approach to chronic disease management is not new and has been shown to be effective for reducing hospitalisation. However, the focus has been on single disease state. What does this study add: Sustainability of collaborative model of multi-morbidities care require better primary-secondary integration and consideration of social determinants of health.

A multidimensional model of client success when engaging external consultants

Too often the relationship between client and external consultants is perceived as one of protagonist versus antogonist. Stories on dramatic, failed consultancies abound, as do related anecdotal quips. A contributing factor to many "apparently" failed consultancies is a poor appreciation by both the client and consultant of the client's true goals for the project and how to assess progress toward these goals. This paper presents and analyses a measurement model for assessing client success when engaging an external consultant. Three main areas of assessment are identified: (1) the consultant;s recommendations, (2) client learning, and (3) consultant performance. Engagement success is emperically measured along these dimensions through a series of case studies and a subsequent survey of clients and consultants involved in 85 computer-based information system selection projects. Validation fo the model constructs suggests the existence of six distinct and individually important dimensions of engagement success. both clients and consultants are encouraged to attend to these dimensions in pre-engagement proposal and selection processes, and post-engagement evaluation of outcomes.

Advancing practice in critical care : a model of knowledge integration

Aim The aim of this paper was to discuss the potential development of a conceptual model of knowledge integration pertinent to critical care nursing practice. A review of the literature identified that reflective practice appeared to be at the forefront of professional development. Background It could be argued that advancing practice in critical care has been superseded by the advanced practice agenda. Some would suggest that advancing practice is focused on the core attributes of an individual’s practice, which then leads onto advanced practice status. However, advancing practice is more of a process than identifiable skills and as such is often negated when viewing the development of practitioners to the advanced practice level. For example, practice development initiatives can be seen as advancing practice for the masses, which ensures that practitioners are following the same level and practice of care. The question here is, are they developing individually? Relevance to clinical practice What this paper presents is that reflection may not be best suited to advancing practice if the individual practitioner does not have a sound knowledge base both theoretically and experientially. The knowledge integration model presented in this study uses multiple learning strategies that are focused in practice to develop practice, e.g. the use of work-based learning and clinical supervision. To demonstrate the models application, an exemplar of an issue from practice shows its relevance from a practical perspective. Conclusions In conclusion, further knowledge acquisition and its relationship with previously held theory and experience will enable individual practitioners to advance their own practice as well as being a resource for others.

Re-reading the reading lesson : episodes in the history of reading pedagogy

Reading pedagogy is constantly an object of discussion and debate in contemporary policy and practice but is rarely a matter for historical inquiry. This paper reports from a recent study of the history of reading pedagogy in Australia and beyond. It focuses on a recurring figure in the historical record—the ‘reading lesson’. Presented as a distinctive trope, the reading lesson is traced in its regularity in and through the discourse of reading pedagogy, starting in 1930s Australia and moving back into 19th-century Europe, and with specific reference to the UK and the USA. Teaching reading is expressly identified as a moral project—something that, it can be argued, clearly continues into the present.

Development of optical ray tracing model of a standard parabolic trough collector

Parabolic trough concentrator collector is the most matured, proven and widespread technology for the exploitation of the solar energy on a large scale for middle temperature applications. The assessment of the opportunities and the possibilities of the collector system are relied on its optical performance. A reliable Monte Carlo ray tracing model of a parabolic trough collector is developed by using Zemax software. The optical performance of an ideal collector depends on the solar spectral distribution and the sunshape, and the spectral selectivity of the associated components. Therefore, each step of the model, including the spectral distribution of the solar energy, trough reflectance, glazing anti-reflection coating and the absorber selective coating is explained and verified. Radiation flux distribution around the receiver, and the optical efficiency are two basic aspects of optical simulation are calculated using the model, and verified with widely accepted analytical profile and measured values respectively. Reasonably very good agreement is obtained. Further investigations are carried out to analyse the characteristics of radiation distribution around the receiver tube at different insolation, envelop conditions, and selective coating on the receiver; and the impact of scattered light from the receiver surface on the efficiency. However, the model has the capability to analyse the optical performance at variable sunshape, tracking error, collector imperfections including absorber misalignment with focal line and de-focal effect of the absorber, different rim angles, and geometric concentrations. The current optical model can play a significant role in understanding the optical aspects of a trough collector, and can be employed to extract useful information on the optical performance. In the long run, this optical model will pave the way for the construction of low cost standalone photovoltaic and thermal hybrid collector in Australia for small scale domestic hot water and electricity production.

A model of workplace safety incorporating worker interactions and simple interventions

Although there was substantial research into the occupational health and safety sector over the past forty years, this generally focused on statistical analyses of data related to costs and/or fatalities and injuries. There is a lack of mathematical modelling of the interactions between workers and the resulting safety dynamics of the workplace. There is also little work investigating the potential impact of different safety intervention programs prior to their implementation. In this article, we present a fundamental, differential equation-based model of workplace safety that treats worker safety habits similarly to an infectious disease in an epidemic model. Analytical results for the model, derived via phase plane and stability analysis, are discussed. The model is coupled with a model of a generic safety strategy aimed at minimising unsafe work habits, to produce an optimal control problem. The optimal control model is solved using the forward-backward sweep numerical scheme implemented in Matlab.

A prospective model of care for breast cancer rehabilitation : bone health and arthralgias

Musculoskeletal health can be compromised by breast cancer treatment. In particular, bone loss and arthralgias are prevalent side effects experienced by women treated with chemotherapy and/or adjuvant endocrine therapy. Bone loss leads to osteoporosis and related fractures, while arthralgias threaten quality of life and compliance to treatment. Because the processes that lead to these musculoskeletal problems are initiated when treatment begins, early identification of women who may be at higher risk of developing problems, routine monitoring of bone density and pain at certain stages of treatment, and prudent application of therapeutic interventions are key to preventing and/or minimizing musculoskeletal sequelae. Exercise may be a particularly suitable intervention strategy because of its potential to address a number of impairments; it may slow bone loss, appears to reduce joint pain in noncancer conditions, and improves other breast cancer outcomes. Research efforts continue in the areas of etiology, measurement, and treatment of bone loss and arthralgias. The purpose of this review is to provide an overview of the current knowledge on the management and treatment of bone loss and arthralgias in breast cancer survivors and to present a framework for rehabilitation care to preserve musculoskeletal health in women treated for breast cancer.

Challenges for implementation of a new model of collaborative design management: Analyzing the impact of human factor

The ineffectiveness of current design processes has been well studied and has resulted in widespread calls for the evolution and development of new management processes. Even following the advent of BIM, we continue to move from one stage to another without necessarily having resolved all the issues. CAD design technology, if well handled, could have significantly raised the level of quality and efficiency of current processes, but in practice this was not fully realized. Therefore, technology alone can´t solve all the problems and the advent of BIM could result in a similar bottleneck. For a precise definition of the problem to be solved we should start by understanding what are the main current bottlenecks that have yet to be overcome by either new technologies or management processes, and the impact of human behaviour-related issues which impact the adoption and utilization of new technologies. The fragmented and dispersed nature of the AEC sector, and the huge number of small organizations that comprise it, are a major limiting factor. Several authors have addressed this issue and more recently IDDS has been defined as the highest level of achievement. However, what is written on IDDS shows an extremely ideal situation on a state to be achieved; it shows a holistic utopian proposition with the intent to create the research agenda to move towards that state. Key to IDDS is the framing of a new management model which should address the problems associated with key aspects: technology, processes, policies and people. One of the primary areas to be further studied is the process of collaborative work and understanding, together with the development of proposals to overcome the many cultural barriers that currently exist and impede the advance of new management methods. The purpose of this paper is to define and delimit problems to be solved so that it is possible to implement a new management model for a collaborative design process.

A model of enterprise architecture evolution

Enterprise architectures are exposed to fast emerging business and information technology capabilities. A prominent example is the paradigm of service-orientation, which leads to its own architectural requirements and impacts the design and ongoing evolution of Enterprise Architectures. This thesis develops the first theoretical model describing enterprise architecture evolution and outcomes in light of a changing IT landscape such as service-oriented architectures. The developed theoretical model explains enterprise architecture evolution, its main stages and related capabilities. This model can be used to derive theoretical, sound guidelines to manage enterprise architectures in a changing environment.

Aspect-based model of user experience

Traditional HCI design and evaluation methods merely focus on functional and usability aspects of a product. Although these aspects are important, they do not guarantee product’s success, especially the consumer product. Many consumer products are now part of user’s everyday activities – that support fun, pleasure, entertainment, etc. Secondly, in today’s consumer market many of the products have become similar in terms of their technology, functionality, price and quality. In response, many companies have started designing products with added emotional and experiential values. This has challenged designer’s to explore and visualize directions in product design field that could evoke intended and desired experiences amongst its users. Subjective product qualities such as fun, pleasure, entertainment, etc. are not the part of a product, but they are better thought of as the outcome of user’s interaction with the product...

Evaluating a model of parental influence on youth physical activity

Objective To test a conceptual model linking parental physical activity orientations, parental support for physical activity, and children's self-efficacy perceptions with physical activity participation. Participants and setting The sample consisted of 380 students in grades 7 through 12 (mean age, 14.0±1.6 years) and their parents. Data collection took place during the fall of 1996. Main outcome measures Parents completed a questionnaire assessing their physical activity habits, enjoyment of physical activity, beliefs regarding the importance of physical activity, and supportive behaviors for their child's physical activity. Students completed a 46-item inventory assessing physical activity during the previous 7 days and a 5-item physical activity self-efficacy scale. The model was tested via observed variable path analysis using structural equation modeling techniques (AMOS 4.0). Results An initial model, in which parent physical activity orientations predicted child physical activity via parental support and child self-efficacy, did not provide an acceptable fit to the data. Inclusion of a direct path from parental support to child physical activity and deletion of a nonsignificant path from parental physical activity to child physical activity significantly improved model fit. Standardized path coefficients for the revised model ranged from 0.17 to 0.24, and all were significant at the p<0.0001 level. Conclusions Parental support was an important correlate of youth physical activity, acting directly or indirectly through its influence on self-efficacy. Physical activity interventions targeted at youth should include and evaluate the efficacy of individual-level and community-level strategies to increase parents’ capacity to provide instrumental and motivational support for their children's physical activity.

Upregulated MT1-MMP/TIMP-2 axis in the TSU-Pr1-B1/B2 model of metastatic progression in transitional cell carcinoma of the bladder

Muscle invasive transitional cell carcinoma (TCC) of the bladder is associated with a high frequency of metastasis, resulting in poor prognosis for patients presenting with this disease. Models that capture and demonstrate step-wise enhancement of elements of the human metastatic cascade on a similar genetic background are useful research tools. We have utilized the transitional cell carcinoma cell line TSU-Pr1 to develop an in vivo experimental model of bladder TCC metastasis. TSU-Pr1 cells were inoculated into the left cardiac ventricle of SCID mice and the development of bone metastases was monitored using high resolution X-ray. Tumor tissue from a single bone lesion was excised and cultured in vitro to generate the TSU-Pr1-B1 subline. This cycle was repeated with the TSU-Pr1-B1 cells to generate the successive subline TSU-Pr1-B2. DNA profiling and karyotype analysis confirmed the genetic relationship of these three cell lines. In vitro, the growth rate of these cell lines was not significantly different. However, following intracardiac inoculation TSU-Pr1, TSU-Pr1-B1 and TSU-Pr1-B2 exhibited increasing metastatic potential with a concomitant decrease in time to the onset of radiologically detectable metastatic bone lesions. Significant elevations in the levels of mRNA expression of the matrix metalloproteases (MMPs) membrane type 1-MMP (MT1-MMP), MT2-MMP and MMP-9, and their inhibitor, tissue inhibitor of metalloprotease-2 (TIMP-2), across the progressively metastatic cell lines, were detected by quantitative PCR. Given the role of MT1-MMP and TIMP-2 in MMP-2 activation, and the upregulation of MMP-9, these data suggest an important role for matrix remodeling, particularly basement membrane, in this progression. The TSU-Pr1-B1/B2 model holds promise for further identification of important molecules.

The role of desire in understanding intentions to drink responsibly : an application of the model of goal-directed behaviour

This study models young people's moderate drinking decision-making using the Model of Goal-Directed Behaviour (MGB), thus presenting insights into young people's desires and intentions to drink responsibly. Testing the applicability of the MGB to quantitatively analyse responsible drinking, the explanatory sphere of the MGB is extended. An online survey resulted in 1522 completed questionnaires from respondents aged between 18 and 25 years. Collected data were analysed with structural equation modelling (SEM) using SPSS AMOS21 (IBM, New York, NY, USA) software. The key finding of this study is that an individual's desire to drink moderately is the most important predictor of young people's responsible drinking intentions. Our use of MGB provides further evidence that there is a strong distinction between consumer desires and intentions.