Anticipated user experience in the early stages of product development

This research investigates users' anticipation of their future experiences with interactive products to support design for experience in the early stages of product development. This research generates new knowledge of anticipated user experience (AUX), which reveals users' tendency to perceive the pragmatic quality of products as the main determinant of their positive future experiences. The AUX Framework has been an important outcome of this study. The exploration of the components of this framework allows a better prediction and understanding of users' underlying needs and potential usage contexts valuable for the early design phases.

Performance-based structural fire design of steel frames using conventional computer software

Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.

Student focus and prioritization of design parameters in first-year engineering design projects

BACKGROUND Research on engineering design is a core area of concern within engineering education and a fundamental understanding of how engineering students approach and undertake design is necessary in order to develop effective design models and pedagogies. Understanding the factors related to design experiences in education and how they affect student practice can help educators as well as designers to leverage these factors as part of the design process. PURPOSE This study investigated the design practices of first-year engineering students’ and their experiences with a first-year engineering course design project. The research questions that guided the investigation were: 1. From a student perspective, what design parameters or criteria are most important? 2. How does this perspective impact subsequent student design practice throughout the design process? DESIGN/METHOD The authors employed qualitative multi-case study methods (Miles & Huberman, 1994) in order to the answer the research questions. Participant teams were observed and video recorded during team design meetings in which they researched the background for the design problem, brainstormed and sketched possible solutions, as well as built prototypes and final models of their design solutions as part of a course design project. Analysis focused on explanation building (Yin, 2009) and utilized within-case and cross-case analysis (Miles & Huberman, 1994). RESULTS We found that students focused disproportionally on the functional parameter, i.e. the physical implementation of their solution, and the possible/applicable parameter, i.e. a possible and applicable solution that benefited the user, in comparison to other given parameters such as safety and innovativeness. In addition, we found that individual teams focused on the functional and possible/ applicable parameters in early design phases such as brainstorming/ ideation and sketching. When prompted to discuss these non-salient parameters (from the student perspective) in the final design report, student design teams often used a post-hoc justification to support how the final designs fit the parameters that they did not initially consider. CONCLUSIONS This study suggests is that student design teams become fixated on (and consequently prioritize) certain parameters they interpret as important because they feel these parameters were described more explicitly in terms how they were met and assessed. Students fail to consider other parameters, perceived to be less directly assessable, unless prompted to do so. Failure to consider other parameters in the early design phases subsequently affects their approach in design phases as well. Case studies examining students’ study strategies within three Australian Universities illustrate similarities with some student approaches to design.

Specification & design of safety technologies for complex socio-technical systems : low-cost level crossings case study

The introduction of safety technologies into complex socio-technical systems requires an integrated and holistic approach to HF and engineering, considering the effects of failures not only within system boundaries, but also at the interfaces with other systems and humans. Level crossing warning devices are examples of such systems where technically safe states within the system boundary can influence road user performance, giving rise to other hazards that degrade safety of the system. Chris will discuss the challenges that have been encountered to date in developing a safety argument in support of low-cost level crossing warning devices. The design and failure modes of level crossing warning devices are known to have a significant influence on road user performance; however, quantifying this effect is one of the ongoing challenges in determining appropriate reliability and availability targets for low-cost level crossing warning devices.

The influence of Monte Carlo source parameters on detector design and dose perturbation in small field dosimetry

To obtain accurate Monte Carlo simulations of small radiation fields, it is important model the initial source parameters (electron energy and spot size) accurately. However recent studies have shown that small field dosimetry correction factors are insensitive to these parameters. The aim of this work is to extend this concept to test if these parameters affect dose perturbations in general, which is important for detector design and calculating perturbation correction factors. The EGSnrc C++ user code cavity was used for all simulations. Varying amounts of air between 0 and 2 mm were deliberately introduced upstream to a diode and the dose perturbation caused by the air was quantified. These simulations were then repeated using a range of initial electron energies (5.5 to 7.0 MeV) and electron spot sizes (0.7 to 2.2 FWHM). The resultant dose perturbations were large. For example 2 mm of air caused a dose reduction of up to 31% when simulated with a 6 mm field size. However these values did not vary by more than 2 % when simulated across the full range of source parameters tested. If a detector is modified by the introduction of air, one can be confident that the response of the detector will be the same across all similar linear accelerators and the Monte Carlo modelling of each machine is not required.

Rodent Scope: A User-Configurable Digital Wireless Telemetry System for Freely Behaving Animals

This paper describes the design and implementation of a wireless neural telemetry system that enables new experimental paradigms, such as neural recordings during rodent navigation in large outdoor environments. RoSco, short for Rodent Scope, is a small lightweight user-configurable module suitable for digital wireless recording from freely behaving small animals. Due to the digital transmission technology, RoSco has advantages over most other wireless modules of noise immunity and online user-configurable settings. RoSco digitally transmits entire neural waveforms for 14 of 16 channels at 20 kHz with 8-bit encoding which are streamed to the PC as standard USB audio packets. Up to 31 RoSco wireless modules can coexist in the same environment on non-overlapping independent channels. The design has spatial diversity reception via two antennas, which makes wireless communication resilient to fading and obstacles. In comparison with most existing wireless systems, this system has online user-selectable independent gain control of each channel in 8 factors from 500 to 32,000 times, two selectable ground references from a subset of channels, selectable channel grounding to disable noisy electrodes, and selectable bandwidth suitable for action potentials (300 Hz–3 kHz) and low frequency field potentials (4 Hz–3 kHz). Indoor and outdoor recordings taken from freely behaving rodents are shown to be comparable to a commercial wired system in sorting for neural populations. The module has low input referred noise, battery life of 1.5 hours and transmission losses of 0.1% up to a range of 10 m.

"Show me, how does it look now" : remote help-giving in collaborative design

This paper examines the role of visual information in a remote help-giving situation involving the collaborative physical task of designing a prototype remote control. We analyze a set of video recordings captured within an experimental setting. Our analysis shows that using gestures and relevant artefacts and by projecting activities on the camera, participants were able to discuss several design-related issues. The results indicate that with a limited camera view (mainly faces and shoulders), participants' conversations were centered at the physical prototype that they were designing. The socially organized use of our experimental setting provides some key implications for designing future remote collaborative systems.

Does counting still count? Revisiting the security of counting based user authentication protocols against statistical attacks

At NDSS 2012, Yan et al. analyzed the security of several challenge-response type user authentication protocols against passive observers, and proposed a generic counting based statistical attack to recover the secret of some counting based protocols given a number of observed authentication sessions. Roughly speaking, the attack is based on the fact that secret (pass) objects appear in challenges with a different probability from non-secret (decoy) objects when the responses are taken into account. Although they mentioned that a protocol susceptible to this attack should minimize this difference, they did not give details as to how this can be achieved barring a few suggestions. In this paper, we attempt to fill this gap by generalizing the attack with a much more comprehensive theoretical analysis. Our treatment is more quantitative which enables us to describe a method to theoretically estimate a lower bound on the number of sessions a protocol can be safely used against the attack. Our results include 1) two proposed fixes to make counting protocols practically safe against the attack at the cost of usability, 2) the observation that the attack can be used on non-counting based protocols too as long as challenge generation is contrived, 3) and two main design principles for user authentication protocols which can be considered as extensions of the principles from Yan et al. This detailed theoretical treatment can be used as a guideline during the design of counting based protocols to determine their susceptibility to this attack. The Foxtail protocol, one of the protocols analyzed by Yan et al., is used as a representative to illustrate our theoretical and experimental results.

Exploring mediated interactions : a design exercise

With the emergence of personal and ubiquitous computing systems in the last decade, interaction designers have started designing products by employing quality oriented aspects such as user experience, playfulness, enchantment and others. In order to explore novel forms of mediated interactions, designers need to focus beyond the basic user requirements and usability issues. We present a procedure and results of a design exercise that we carried out with students of a master's course on Visual Design. Our intention was to explore new forms of mediated interaction by using a specific design exercise. We provide the details of the resulted design concepts and discuss the usefulness of our design exercise.

Dynamics of affordances and implications for design

Affordance is an important concept in HCI. There are various interpretations of affordances but it has been difficult to use this concept for design purposes. Often the treatment of affordances in the current HCI literature has been as a one-to-one relationship between a user and an artefact. According to our views, affordance is a dynamic, always emerging relationship between a human and his environment. We believe that the social and cultural contexts within which an artefact is situated affect the way in which the artefact is used. Using a Structuration Theory approach, we argue that affordances need also be treated at a much broader level, encompassing social and cultural aspects. We suggest that affordances should be seen at three levels: single user, organizational (or work group) and societal. Focusing on the organizational level affordances, we provide details of several important factors that affect the emergence of affordances.

Design Minds Tomorrow's Classroom Toolkit

The Design Minds Tomorrow’s Classroom Toolkit was one of six K7-12 secondary school design toolkits commissioned by the State Library of Queensland (SLQ) Asia Pacific Design Library (APDL), to facilitate the delivery of the Stage 1 launch of its Design Minds online platform (www.designminds.org.au) partnership initiative with Queensland Government Arts Queensland and the Smithsonian Cooper-Hewitt National Design Museum, on June 29, 2012. Design Minds toolkits are practical guides, underpinned by a combination of one to three of the Design Minds model phases of ‘Inquire’, ‘Ideate’ and ‘Implement’ (supported by at each stage with structured reflection), to enhance existing school curriculum and empower students with real life design exercises, within the classroom environment. Toolkits directly identify links to Naplan, National Curriculum, C2C and Professional Standards benchmarks, as well as the student capabilities of successful and creative 21st century citizens they seek to engender through design thinking. This toolkit explores, through four distinct exercises, different design tools and ways to approach the future design of environments (classrooms/schools) to facilitate the Reggio Emilia philosophy of learning, while addressing diverse and changing social, cultural, technological and environmental challenges. The Design Minds Tomorrow’s Classroom Toolkit encourages students to explore architecture and interior design, and to think about their (life-long) learning as a product of inspiring interactions with people and the environments around them, and that their potential role in contributing to both delightful and functional design solutions requires a deep understanding of the user experience. More generally, it aims to facilitate awareness in young people, of the role of design in society and the value of design thinking skills in generating strategies to solve basic to complex systemic challenges, as well as to inspire post-secondary pathways and idea generation for education. The toolkit encourages students and teachers to develop sketching, making, communication, presentation and collaboration skills to improve their design process, as well as explore further inquiry (background research) to enhance the ideation exercises. Exercise 1 focuses on the ‘Inquire’ and ‘Ideate’ phases, Exercise 2 on the ‘Inquire’, Exercise 3 builds on ideation skills, and Exercise 4 concentrates on the ‘Implement’ phase. Depending on the intensity of the focus, the unit of work could be developed over a 2-5 week program (approximately 4-10 x 60 minute lessons/workshops) or as smaller workshops treated as discrete learning experiences. The toolkit is available for public download from http://designminds.org.au/tomorrows-classroom/ on the Design Minds website. This toolkit inspired the authorship and facilitation of a 2-day design workshop entitled Learning Environment 2050 at John Paul College, Daisy Hill, Brisbane on the 15-16 August 2013. 120 Grade 7 students and their teachers, under the mentorship of two design academics, 3 QUT design students and a professional architect, as part of a QUT School of Design Project Week community engagement activity, explored the formulation of a participatory design brief for the redesign of the school’s Wesley Precinct (including classrooms, a sustainable farm and recreation areas).

Non-formal techniques for early assessment of design ideas for services

Designing systems for multiple stakeholders requires frequent collaboration with multiple stakeholders from the start. In many cases at least some stakeholders lack a professional habit of formal modeling. We report observations from student design teams as well as two case studies, respectively of a prototype for supporting creative communication to design objects, and of stakeholder-involvement in early design. In all observations and case studies we found that non-formal techniques supported strong collaboration resulting in deep understanding of early design ideas, of their value and of the feasibility of solutions.

From impact assessment to user-friendly risk management decision-making

In earlier cultures and societies, hazards and risks to human health were dealt with by methods derived from myth, metaphor and ritual. In modem society however, notions of hazard and risk have been transformed from the level of a folk discourse to that of an expert centred concept (Plough & Krimsky, 1987). With the professionalization of risk and hazard analysis came a preferred framework for decision making based on a range of 'technical' methodologies (Giere, 1991 ). This is especially true for decision processes relating to risk assessment and management, and impact assessment. Such approaches however, often entail narrow technical-based theoretical assumptions about human behaviour and the natural world, and the· methods used. They therefore carry 'in-built' error factors that contribute considerable uncertainty to the results.

Experiencing-in-the-world : using pragmatist philosophy to design for aesthetic experience

With the growing use of personal and ubiquitous computing technology, an increase is seen in utilizing aesthetic aspects for designing interactive systems. The use of aesthetic interpretations, however, has differed in different applications, often lacking a coherent and holistic meaning of aesthetics. In this paper we provide an account on aesthetics, utilizing the pragmatist perspective, which can be used as a framework to design for aesthetic experience in interactive systems. We discuss seven major themes of aesthetic experience. Using our framework we discuss two design examples. In the first example ? Panorama, the framework is used to inform the design process and making design decisions for supporting aesthetic social awareness in an academic work environment. In the second example ? Virtual Dancer, the framework is used to analyze the aesthetics of an entertainment experience and to elicit further improvements. In the end we discuss the role of aesthetics in the design of interactive systems.

Aspect-based model of user experience

Traditional HCI design and evaluation methods merely focus on functional and usability aspects of a product. Although these aspects are important, they do not guarantee product’s success, especially the consumer product. Many consumer products are now part of user’s everyday activities – that support fun, pleasure, entertainment, etc. Secondly, in today’s consumer market many of the products have become similar in terms of their technology, functionality, price and quality. In response, many companies have started designing products with added emotional and experiential values. This has challenged designer’s to explore and visualize directions in product design field that could evoke intended and desired experiences amongst its users. Subjective product qualities such as fun, pleasure, entertainment, etc. are not the part of a product, but they are better thought of as the outcome of user’s interaction with the product...