Teaching engineering tribology: Elements of assessment design for different learning styles

This study involves teaching engineering students concepts in lubrication engineering that are heavily dependent on mathematics. Excellent learning outcomes have been observed when assessment tasks are devised for a diversity of learning styles. Providing different pathways to knowledge reduces the probability that a single barrier halts progress towards the ultimate learning objective. The interdisciplinary nature of tribology can be used advantageously to tie together multiple elements of engineering to solve real physical problems—an approach that seems to benefit a majority of engineering students. To put this into practice, various assessment items were devised on the study of hydrodynamics, culminating in a project to provide a summative evaluation of the students’ learning achievement. A survey was also conducted to assess other aspects of students’ learning experiences under the headings: ‘perception of learning’ and ‘overall satisfaction’. High degrees of achievement and satisfaction were observed. An attempt has been made to identify the elements contributing to success so that they may be applied to other challenging concepts in engineering education.

Literacy teaching and learning in a digital world: Challenges of a new era

Teachers the world over are aware of the range of new challenges that arise from this new era. One challenge is the role of digital technologies in literacy learning. Despite its reputation for being engaging, digital technologies do not always enhance learning outcomes. Whilst the concerns vary across time and place, the core issue of what is a highly sought after literacy learning outcome in this new era warrants consideration. This paper introduces Kalantzis and Cope’s (2005) theorisation of eight knowledge processes for literacy learning. They claim that experiencing the known, conceptualising by naming, analysing functionally and applying appropriately, whilst necessary, are not on their own sufficient for the development of high level literacy practices. It is their contention that students must also be able to experience the new, conceptualise by theorising, analyse creatively and apply critically. This theorisation forms an auditing framework for considering the outcomes of different uptakes of digital technologies in a Social Studies and a Science unit.

A preliminary investigation into technology and processes facilitating the assurance of learning

This paper reports on the outcomes from a preliminary evaluation of technologies and processes intended to support the Assurance of Learning initiative in the business faculty of an Australian university. The study investigated how existing institutional information systems and operational processes could be used to support direct measures of student learning and the attainment of intended learning goals. The levels at which learning outcomes had been attained were extracted from the University Learning Management System (LMS), based on rubric data for three assessments in two units. Spreadsheets were used to link rubric criteria to the learning goals associated with the assessments as identified in a previous curriculum mapping exercise, and to aggregate the outcomes. Recommendations arising from this preliminary study are made to inform a more comprehensive pilot based on this approach, and manage the quality of student learning experiences in the context of existing processes and reporting structures.

Transforming teaching practice through virtual classrooms: A study of staff and student views of synchronous learning

Australia is a vast land and access to quality higher education is challenging for many Australians that live outside the larger metropolitan areas. In 2010, the School of Education at an Australian university (Curtin University in Western Australia) moved to flexible delivery of a fully online Bachelor of Education degree for their rural students. The new model of delivery allows access for students from any location provided they have a computer and an internet connection.A number of teaching staff had previously used an asynchronous environment to deliver learning modules housed within a learning management system (LMS) but had not used synchronous software with their students. To enhance the learning environment and to provide high quality learning experiences to students learning at a distance, the adoption of synchronous software (Elluminate Live) was introduced. This software is a real-time virtual classroom environment that allows for communication through Voice over Internet Protocol (VoIP) and video conferencing, alongside a large number of collaboration tools to engage learners.This research paper reports on the integration of a live e-learning solution into the current Learning Management System (LMS) environment. Staff were interviewed about their perceptions and a questionnaire was administered to a sample of students to identify their experience with the synchronous software in order to inform future practice.

Understanding the effectiveness of ICT professional learning through the TPACK Conceptual Framework: A case study

With a significant investment in digital technologies in Australian schools, the effective integration of such technology into teaching and learning is paramount. A growing body of evidence indicates that ICT professional learning is integral to the transformation of pedagogy that will improve student learning outcomes. The question arises as to how professional learning is planned and delivered within schools to ensure that all needs are being met. The purpose of this paper is to report on the research findings of a study into professional learning and ICT integration. The TPACK conceptual framework underpins the analyses of the data and brings forth the importance of technological and pedagogical knowledge. Six key categories will be discussed and the implication for practice will be considered.

The inside story: A survey of social work students' supervision and learning opportunities on placement

Practice learning accounts for half of the content of the bachelor of social work degree course requirements in Northern Ireland in their field education programmes and share a professional and ethical responsibility with practice teachers to provide appropriate learning environments to prepare students as competent and professional practitioners. The accreditation standards for practice learning require the placement to provide students with regular supervision and exposure to a range of learning strategies, but there is little research that actually identifies the types of placements offering this learning and the key activities provided. This paper builds on an Australian study and surveys social work students in two programmes in Northern Ireland about their exposure to a range of learning activities, how frequently they were provided and how it compares to what is required by the Northern Ireland practice standards. The results indicated that, although most students were satisfied with the supervision and support they received during their placement, the frequency of supervision and type of learning activities varied according to different settings, year levels and who provided the learning opportunities.

Engaging Students in the Implementation of Criterion Referenced Assessment in First Year Law

The Queensland University of Technology (QUT) University Academic Board approved a new QUT Assessment Policy in September 2003, which requires a criterion-referenced approach as opposed to a norm-referenced approach to assessment across the university(QUT,MOPP,2003). In 2004, the QUT Law School embarked upon a process of awareness raising about criterion-referenced assessment amongst staff and from 2004 – 2005 staggered the implementation of criterion-referenced assessment in all first year core undergraduate law units. This paper will briefly discuss the benefits and potential pitfalls of criterion referenced assessment and the context for implementing it in the first year law program, report on student’s feedback on the introduction of criterion referenced assessment and the strategies adopted in 2005 to engage students more fully in criterion referenced assessment processes to enhance their learning outcomes.

The development of a new four-year Construction Technology and Management Stream at QUT

This paper focuses on the development and delivery of a core construction management (CM) unit, which forms the capstone of a four-unit CM stream in an undergraduate programme in the Faculty of Built Environment and Engineering at the Queensland University of Technology. UDB410 (Construction Management) is a final year unit that consolidates skills students have learned throughout their degree, hopefully graduating them as work-ready construction managers. It was developed in consultation with the Queensland Chapter of the Australian Institute of Building (AIB) and is a final year unit in the undergraduate Bachelor of Urban Development (CM) course. The unit uses various tools such as the OSIRIS business database (Bureau van Dijk Electronic Publishing, 2009), the AROUSAL (UK Version) construction business simulation (Lansley, 2009) and the Denison Organisational Culture Survey (Denison, 2000) to facilitate the development of skills in managing a construction company. The objectives of the paper are: • To track the rationale and development of the UDB410 unit sand describe the way in which this final year unit integrates learning from other parts of the course within which it is located as well as capping-off the CM stream of core units; • To highlight the difficulties of blending a balance of technology and management in a single unit; and • To explain how partnering with the construction industry benefited the learning quality of the unit.

The implications of creative industries for regional outcomes

As the 21st century progresses, the most successful economies and societies will be creative ones. Worldwide, governments are producing strategies to encourage the development of creative industries and to strengthen the role of knowledge cities nationally and internationally. There is a significant policy discussion regarding the role of creative clusters in strengthening local economies and significant energy has been expended discussing the many positive outcomes of such developments. This article takes these issues as a starting point and considers the role of creative industries within broader concerns regarding uneven metropolitan development. By developing a typology of jobs across Australia’s metropolitan regions, the article will consider the broad social and economic impacts of uneven development of creative industry jobs between metropolitan regions and also the implications for individual metropolitan regions and policy outcomes.

An innovative learning model for teaching architectural technology using building information modelling : a Queensland University of Technology perspective

In architecture courses, instilling a wider understanding of the industry specific representations practiced in the Building Industry is normally done under the auspices of Technology and Science subjects. Traditionally, building industry professionals communicated their design intentions using industry specific representations. Originally these mainly two dimensional representations such as plans, sections, elevations, schedules, etc. were produced manually, using a drawing board. Currently, this manual process has been digitised in the form of Computer Aided Design and Drafting (CADD) or ubiquitously simply CAD. While CAD has significant productivity and accuracy advantages over the earlier manual method, it still only produces industry specific representations of the design intent. Essentially, CAD is a digital version of the drawing board. The tool used for the production of these representations in industry is still mainly CAD. This is also the approach taken in most traditional university courses and mirrors the reality of the situation in the building industry. A successor to CAD, in the form of Building Information Modelling (BIM), is presently evolving in the Construction Industry. CAD is mostly a technical tool that conforms to existing industry practices. BIM on the other hand is revolutionary both as a technical tool and as an industry practice. Rather than producing representations of design intent, BIM produces an exact Virtual Prototype of any building that in an ideal situation is centrally stored and freely exchanged between the project team. Essentially, BIM builds any building twice: once in the virtual world, where any faults are resolved, and finally, in the real world. There is, however, no established model for learning through the use of this technology in Architecture courses. Queensland University of Technology (QUT), a tertiary institution that maintains close links with industry, recognises the importance of equipping their graduates with skills that are relevant to industry. BIM skills are currently in increasing demand throughout the construction industry through the evolution of construction industry practices. As such, during the second half of 2008, QUT 4th year architectural students were formally introduced for the first time to BIM, as both a technology and as an industry practice. This paper will outline the teaching team’s experiences and methodologies in offering a BIM unit (Architectural Technology and Science IV) at QUT for the first time and provide a description of the learning model. The paper will present the results of a survey on the learners’ perspectives of both BIM and their learning experiences as they learn about and through this technology.

Formative and summative assessment and the notion of constructive alignment

This paper discusses the different perceptions of first year accounting students about their tutorial activities and their engagements in assessment. As the literature suggests, unless participation in learning activities forms part of graded assessment, it is often difficult to engage students in these activities. Using an action research model, this paper reports the study of first year accounting students' responses to action-oriented learning tasks in tutorials. The paper focuses on the importance of aligning curriculum objectives, learning and teaching activities and assessment, i.e. the notion of constructive alignment. However, as the research findings indicate, without support at institutional level, applying constructive alignment to facilitate quality student learning outcomes is a difficult task. Thus, the impacts of policy constraints on curriculum issues are also discussed, focusing on the limitations faced by tutors and their lack of involvement in curriculum development.

Students’ perceptions of teaching and learning: the influence of students’ approaches to learning and teachers’ approaches to teaching

Nearly 500 secondary students in 24 classes were surveyed and four students in each class interviewed concerning their approaches to learning and perceptions of their classroom environment. While interviewed students with deep approaches to learning generally demonstrated a more sophisticated understanding of the learning opportunities offered to them than did students with surface approaches, teaching strategies also influenced students' perceptions. When teachers focused strongly on actively engaging students and creating a supportive environment, students with both deep and surface approaches focused on student-centred aspects of the class. In contrast, when traditional expository teaching methods were used exclusively, students with deep and surface approaches both focused on transmission and reproduction.