A hybrid maximum power point tracking for partially shaded photovoltaic systems in the tropics

Partial shading and rapidly changing irradiance conditions significantly impact on the performance of photovoltaic (PV) systems. These impacts are particularly severe in tropical regions where the climatic conditions result in very large and rapid changes in irradiance. In this paper, a hybrid maximum power point (MPP) tracking (MPPT) technique for PV systems operating under partially shaded conditions witapid irradiance change is proposed. It combines a conventional MPPT and an artificial neural network (ANN)-based MPPT. A low cost method is proposed to predict the global MPP region when expensive irradiance sensors are not available or are not justifiable for cost reasons. It samples the operating point on the stairs of I–V curve and uses a combination of the measured current value at each stair to predict the global MPP region. The conventional MPPT is then used to search within the classified region to get the global MPP. The effectiveness of the proposed MPPT is demonstrated using both simulations and an experimental setup. Experimental comparisons with four existing MPPTs are performed. The results show that the proposed MPPT produces more energy than the other techniques and can effectively track the global MPP with a fast tracking speed under various shading patterns.

Better health outcomes for people with physical disabilities in China through audits of mobility related access : a research and implementation need

China has 85 million people with disabilities, 30% of whom have a physical disability(1). Up to 2006, overall disability rates increased by 0.5% per year, more for males and in rural areas, and rates of physical disability increased by 11.2% per year(2). With population ageing the proportion of people with disability will increase even faster. In May 2014 the 67th World Health Assembly adopted a resolution endorsing the WHO Global Disability Action Plan 2014–2021. One of its three objectives is “to remove barriers and improve access to health services and programmes”. Access to transport contributes to positive health outcomes both directly and indirectly (e.g. access to economic opportunities, which is associated with better health)(3). However, once people with physical disabilities leave their dwellings they are confronted with physical barriers to their mobility, ranging from the condition/provision of paths to the cost/availability of transport and access to buildings. In addition, their mobility restrictions increase their vulnerability as road users, exposing them to a higher risk of injury through road crashes. QUT's School of Public Health and Social Work (PHSW) and and Centre for Accident Research and Road Safety-Queensland (CARRS-Q) CARRS-Q have been collaborating on development of a combined disability audit and road safety access tool that can identify transport barriers and safety issues along the routes taken by people with disabilities, to enable prioritisation of actions to address these issues. There are also spin-off benefits for other road users from addressing the rising toll of disability through road crashes in China(4). The tool has undergone initial proof-of-concept testing in India and Viet Nam, and is currently being assessed in Cambodia and Laos. Given the rapid development of China, increases in rates of physical disability and the impacts of an ageing population, it is proposed to establish collaborative research through the Australia-China Centre for Public Health to (1) tailor the combined road safety audit and disability access tool for use in China; (2) evaluate its use on a sample of routes; (3) develop plans for changes to the routes in consultation with local authorities; (4) evaluate the effectiveness of implemented changes in terms of access and health. 1. Zheng, Q, et al, 2014. Health and Quality of Life Outcomes, 12:25. 2. Zheng, X, et al, 2011. Bull World Health Org, 89:788–797. 3. Götschi, T & Kahlmeier, S, 2011. Integrated Transport, Health, and Sustainability Assessment (INTHESA): Final Report. Institute of Social and Preventive Medicine, University of Zurich. 4. Lin, T, et al, 2013. J Public Health, 35:541–547.

Is there a bone-nail specific entry point? automated fit quantification of tibial nail designs during the insertion for six different nail entry points

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of tibia. Selection of the correct nail insertion point is important for axial alignment of bone fragments and to avoid iatrogenic fractures. However, the standard entry point (SEP) may not always optimise the bone-nail fit due to geometric variations of bones. This study aimed to investigate the optimal entry for a given bone-nail pair using the fit quantification software tool previously developed by the authors. The misfit was quantified for 20 bones with two nail designs (ETN and ETN-Proximal Bend) related to the SEP and 5 entry points which were 5 mm and 10 mm away from the SEP. The SEP was the optimal entry point for 50% of the bones used. For the remaining bones, the optimal entry point was located 5 mm away from the SEP, which improved the overall fit by 40% on average. However, entry points 10 mm away from the SEP doubled the misfit. The optimised bone-nail fit can be achieved through the SEP and within the range of a 5 mm radius, except posteriorly. The study results suggest that the optimal entry point should be selected by considering the fit during insertion and not only at the final position.

Thriller

Shifts in genre definitions and classifications over time are very much a part of a living art form such as cinema. Films that today we might identify as bearing some of the hallmarks of the thriller, but which were not understood as such at the time of release, have been made in Australia since the earliest days of narrative cinema. The Story of the Kelly Gang (Charles Tait, 1906) contains some of the thriller’s stock elements: crime, conspiracy, suspense, a chase, heroes and villains. The fact that these elements are not exclusive to the thriller underscores the point that genres change, evolve, and often overlap. While contemporary reportage attests that The Story of the Kelly Gang thrilled audiences, it was not named as a ‘thriller’ at the time. Even so, a genealogy of the thriller can be traced through Australian film history, despite quiescent periods.

Point Henry Bushfire Safety : 10 Year Plan

Bushfire responsive design and management strategy at the bioregion scale. 248 Page document containing text, original designs, photographs, masterplans and critique - created as an alternative community-based strategy for risk mitigation and management reponse to bushfire in the Point Henry and Bremer Bay region of Western Australia. Document drafted as an alternative to a local government commissioned plan which had many shortcomings. It was presented as a 'powerpoint' presentaion at a public meeting in Bremer Bay on 7th April 2014 and disseminated to local community members and councillors to encourage public debate and feedback to the Shire of Jerramungup, WA.

An examination of isotherm generation : impact of bottle-point method upon potassium ion exchange with strong acid cation resin

This paper relates to the importance of impact of the chosen bottle-point method when conducting ion exchange equilibria experiments. As an illustration, potassium ion exchange with strong acid cation resin was investigated due to its relevance to the treatment of various industrial effluents and groundwater. The “constant mass” bottle-point method was shown to be problematic in that depending upon the resin mass used the equilibrium isotherm profiles were different. Indeed, application of common equilibrium isotherm models revealed that the optimal fit could be with either the Freundlich or Temkin equations, depending upon the conditions employed. It could be inferred that the resin surface was heterogeneous in character, but precise conclusions regarding the variation in the heat of sorption were not possible. Estimation of the maximum potassium loading was also inconsistent when employing the “constant mass” method. The “constant concentration” bottle-point method illustrated that the Freundlich model was a good representation of the exchange process. The isotherms recorded were relatively consistent when compared to the “constant mass” approach. Unification of all the equilibrium isotherm data acquired was achieved by use of the Langmuir Vageler expression. The maximum loading of potassium ions was predicted to be at least 116.5 g/kg resin.

A meshless method based on Point Interpolation Method (PIM) for the space fractional diffusion equation

This paper aims to develop a meshless approach based on the Point Interpolation Method (PIM) for numerical simulation of a space fractional diffusion equation. Two fully-discrete schemes for the one-dimensional space fractional diffusion equation are obtained by using the PIM and the strong-forms of the space diffusion equation. Numerical examples with different nodal distributions are studied to validate and investigate the accuracy and efficiency of the newly developed meshless approach.

Moderation in higher education: Four discourses

Across the globe, higher education institutions are working in environments of increasing accountability with little sign of this trend abating. This heightened focus on accountability has placed greater demands on institutions to provide evidence of quality and the achievement of standards that assure that quality. Moderation is one quality assurance process that plays a central role in the teaching, learning and assessment cycle in higher education institutions. While there is a growing body of research globally on teaching, learning and , to a lesser degree, assessment in higher education, the process of moderation has received even less attention (Watty, Freeman, Howieson, Hancock, O'Connell, et al. 2013). Until recently, moderation processes in Australian universities have been typically located within individual institutions, with universities given the responsibility for developing their own specific policies and practices. However, in 2009 the Australian Government announced that an independent national quality and regulatory body for higher education institutions would be established. With the introduction of the Tertiary Education Quality Standards Authority (TEQSA), more formalised requirements for moderation of assessment are being mandated. In light of these reforms, the purpose of this qualitative study was to identify and investigate current moderation practices operating within one faculty, the Faculty of Education, in a large urban university in eastern Australia. The findings of this study revealed four discourses of moderation: equity, justification, community building and accountability. These discourses provide a starting point for academics to engage in substantive conversations around assessment and to further critique the processes of moderation.

Introduction to Point and Counterpoint: What does the Review of the Australian Curriculum mean for History?

The April 2015 edition of Curriculum Perspectives has a special focus and casts light on the continuing development of the Australian Curriculum. This paper provides an introduction to a series of papers in the Point and Counterpoint section of this edition on the Review of the Australian Curriculum with reference to History. It makes clear that History is one of the most contested areas of the curriculum and that whilst politicians and policy makers are concerned with the importance of history in relation to national identity and nation building, history serves other purposes. The paper reiterates the need to pay attention to the particularities of discipline–based knowledge for the study of history in schools and the central role of inquiry for student learning in history. In doing so, it establishes the context for the five papers which follow.

How to tackle cybercrime before people even know they're a victim

An estimated A$75,000 is lost by Australians everyday to online fraud, according to the Australian Competition and Consumer Commission (ACCC). Given that this is based on reported crime, the real figure is likely to be much higher. It is well known that fraud, particularly online fraud, has a very low reporting rate. This also doesn’t even begin to encompass non-financial costs to victims. The real cost is likely to be much, much higher. There are many challenges to policing this type of crime, and victims who send money to overseas jurisdictions make it even harder, as does the likelihood of offenders creating false identities or simply stealing legitimate ones. But despite these challenges police have started to do something to prevent the impact and losses of online fraud. By accessing financial intelligence, police are able to identify individuals who are sending money to known high-risk countries for fraud. They then notify these people with their suspicions that they may be involved in fraud. In many cases the people don’t even know they may be victims or involved in online fraud.

Renewable energy distribution in public spaces: Analyzing the case of Ballast Point Park in Sydney, using a triple bottom line approach

As cities are rapidly developing new interventions against climate change, embedding renewable energy in public spaces is an important strategy. However, most interventions primarily include environmental sustainability while neglecting the social and economic interrelationships of electricity production. Although there is a growing interest in sustainability within environmental design and landscape architecture, public spaces are still awaiting viable energy-conscious design and assessment interventions. The purpose of this paper is to investigate this issue in a renowned public space—Ballast Point Park in Sydney—using a triple bottom line (TBL) case study approach. The emerging factors and relationships of each component of TBL, within the context of public open space, are identified and discussed. With specific focus on renewable energy distribution in and around Ballast Point Park, the paper concludes with a general design framework, which conceptualizes an optimal distribution of onsite electricity produced from renewable sources embedded in public open spaces.

7-point Subjective Global Assessment is more time sensitive than conventional Subjective Global Assessment in detecting nutrition changes

Background: It is important for nutrition intervention in malnourished patients to be guided by accurate evaluation and detection of small changes in the patient’s nutrition status over time. However, the current Subjective Global Assessment (SGA) is not able to detect changes in a short period of time. The aim of the study was to determine whether 7-point SGA is more time sensitive to nutrition changes than the conventional SGA. Methods: In this prospective study, 67 adult inpatients assessed as malnourished using both the 7-point SGA and conventional SGA were recruited. Each patient received nutrition intervention and was followed up post-discharge. Patients were reassessed using both tools at 1, 3 and 5 months from baseline assessment. Results: It took significantly shorter time to see a one-point change using 7-point SGA compared to conventional SGA (median: 1 month vs. 3 months, p = 0.002). The likelihood of at least a one-point change is 6.74 times greater in 7-point SGA compared to conventional SGA after controlling for age, gender and medical specialties (odds ratio = 6.74, 95% CI 2.88-15.80, p<0.001). Fifty-six percent of patients who had no change in SGA score had changes detected using 7-point SGA. The level of agreement was 100% (k = 1, p < 0.001) between 7-point SGA and 3-point SGA and 83% (k=0.726, p<0.001) between two blinded assessors for 7-point SGA. Conclusion: The 7-point SGA is more time sensitive in its response to nutrition changes than conventional SGA. It can be used to guide nutrition intervention for patients.

Discovering future disaster management capability needs using scenario planning

In recent years disaster risk reduction efforts have focused on disturbances ranging from climate variability, seismic hazards, geo-political instability and public and animal health crises. These factors combined with uncertainty derived from inter-dependencies within and across systems of critical infrastructure create significant problems of governance for the private and public sector alike. The potential for rapid spread of impacts, geographically and virtually, can render a comprehensive understanding of disaster response and recovery needs and risk mitigation issues beyond the grasp of competent authority. Because of such cascading effects communities and governments at local and state-levels are unlikely to face single incidents but rather series of systemic impacts: often appearing concurrently. A further point to note is that both natural and technological hazards can act directly on socio-technical systems as well as being propagated by them: as network events. Such events have been categorised as ‘outside of the box,’ ‘too fast,’ and ‘too strange’ (Lagadec, 2004). Emergent complexities in linked systems can make disaster effects difficult to anticipate and recovery efforts difficult to plan for. Beyond the uncertainties of real world disasters, that might be called familiar or even regular, can we safely assume that the generic capability we use now will suit future disaster contexts? This paper presents initial scoping of research funded by the Bushfire and Natural Hazards Cooperative Research Centre seeking to define future capability needs of disaster management organisations. It explores challenges to anticipating the needs of representative agencies and groups active in before, during and after phases of emergency and disaster situations using capability deficit assessments and scenario assessment.