What contribution can International Relations make to the evolving global health agenda?

This article presents two approaches that have dominated International Relations in their approach to the international politics of health. The statist approach, which is primarily security-focused, seeks to link health initiatives to a foreign or defence policy remit. The globalist approach, in contrast, seeks to advance health not because of its intrinsic security value but because it advances the well-being and rights of individuals. This article charts the evolution of these approaches and demonstrates why both have the potential to shape our understanding of the evolving global health agenda. It examines how the statist and globalist perspectives have helped shape contemporary initiatives in global health governance and suggests that there is evidence of an emerging convergence between the two perspectives. This convergence is particularly clear in the articulation of a number of UN initiatives in this area—especially the One World, One Health Strategic Framework and the Oslo Ministerial Declaration (2007) which inspired the first UN General Assembly resolution on global health and foreign policy in 2009 and the UN Secretary-General's note ‘Global health and foreign policy: strategic opportunities and challenges'. What remains to be seen is whether this convergence will deliver on securing states’ interest long enough to promote the interests of the individuals who require global efforts to deliver local health improvements.

OCIS and Beyond: International Relations in Australia: Introduction

The Oceanic Conference for International Studies (OCIS) has grown from a small, mostly Australian and New Zealand, affair to an international biennial gathering of scholars from North America, Europe, Asia and the Pacific. Established by a small organising committee drawn from universities across Australia and New Zealand, the principal aim of OCIS was to bring together the Oceanic International Relations (IR) community in an organic and inclusive fashion. There would be no secretariat, minimal bureaucracy, costs would be kept as low as possible, and assistance provided to graduate students. The first OCIS, held at the Australian National University in 2004, proved more successful than the organisers had envisaged. The conference continued to grow at its subsequent meetings at the University of Melbourne (2006) and the University of Queensland (2008). With each conference, a new organising committee was established to take carriage of OCIS. At the 2008 meeting, the question of creating a permanent organising meeting and beginning the transition towards a professional association was discussed in detail. If the transition happens at all, it will be gradual, organic, inclusive, and will prioritise the maintenance of the sense of community OCIS has helped establish. Whilst OCIS itself has flourished, associated initiatives such as OCIS working groups and the OCIS newsletter and listserv have withered on the vine, confirming the original organising committee’s view that endeavours such as this will only prosper to the extent that they are derived and driven from the community as a whole. In 2010, OCIS will hold its first conference in New Zealand, hosted by the University of Auckland...

Discussion on full-scale internal pressure measurements

The wind loading on most structural elements is made up of both an external and internal pressure. Internal pressures are also important for the design of naturally ventilated buildings. The internal pressure is the interaction between the external pressure propagating through the building envelope and any internal plant causing building pressurization. Although the external pressure field can be well defined through a series of wind tunnel tests, modeling complexities makes accurate prediction of the internal pressure difficult. For commercial testing for the determination of design cladding pressures, an internal pressure coefficient is generally assumed from wind loading standards. Several theories regarding the propagation of internal pressures through single and multiple dominant openings have been proposed for small and large flexible buildings (Harris (1990), Holmes, (1979), Liu & Saathoff (1981 ), Vickery (1986, 1994), Vickery & Bloxham (1992), Vickery & Georgiou (1991))...

Model for internal porosity development of different shaped foods

Three particular geometrical shapes of foods were prepared from food materials. Cuboidal (aspect ratio = 1:1, 2:1, 3:1) , cylindrical (length: dameter = 1:1, 2:1, 3:1) and spheres were selected from potato, beans and peas respectively. Internal porosity was determined from solid density (theoretical)and particle density (experimental) during fluidised bed drying at different moisture contents. Solid density was calculated using formulae (conservation of mass and volume) already published in the literature by previous researchers. Determined porosity values were correlated with moisture ratio for different geometrical shapes.

Generation of uniform plasmas by crossed internal oscillating current sheets : key concepts and experimental verification

The results of comprehensive experimental studies of the operation, stability, and plasma parameters of the low-frequency (0.46 MHz) inductively coupled plasmas sustained by the internal oscillating rf current are reported. The rf plasma is generated by using a custom-designed configuration of the internal rf coil that comprises two perpendicular sets of eight currents in each direction. Various diagnostic tools, such as magnetic probes, optical emission spectroscopy, and an rf-compensated Langmuir probe were used to investigate the electromagnetic, optical, and global properties of the argon plasma in wide ranges of the applied rf power and gas feedstock pressure. It is found that the uniformity of the electromagnetic field inside the plasma reactor is improved as compared to the conventional sources of inductively coupled plasmas with the external flat coil configuration. A reasonable agreement between the experimental data and computed electromagnetic field topography inside the chamber is reported. The Langmuir probe measurements reveal that the spatial profiles of the electron density, the effective electron temperature, plasma potential, and electron energy distribution/probability functions feature a high degree of the radial and axial uniformity and a weak azimuthal dependence, which is consistent with the earlier theoretical predictions. As the input rf power increases, the azimuthal dependence of the global plasma parameters vanishes. The obtained results demonstrate that by introducing the internal oscillated rf currents one can noticeably improve the uniformity of electromagnetic field topography, rf power deposition, and the plasma density in the reactor.

Inductively coupled plasmas sustained by an internal oscillating current

A global electromagnetic model of an inductively coupled plasma sustained by an internal oscillating current sheet in a cylindrical metal vessel is developed. The electromagnetic field structure, profiles of the rf power transferred to the plasma electrons, electron/ion number density, and working points of the discharge are studied, by invoking particle and power balance. It is revealed that the internal rf current with spatially invariable phase significantly improves the radial uniformity of the electromagnetic fields and the power density in the chamber as compared with conventional plasma sources with external flat spiral inductive coils. This configuration offers the possibility of controlling the rf power deposition in the azimuthal direction.

Effect of an internal rotating current on low-frequency inductively coupled plasmas

The effects of an inductively rotating current were observed on low-frequency inductively coupled plasmas. The spatial distribution of electromagnetic fields was investigated in a cylindrical metallic chamber filled with dense plasma. The distribution of the magnetic field in plasma chamber was observed for rarefied and dense plasmas. The plasma was assumed as uniform in the electromagnetic fields. The results showed the plasma density increased with power and the electron density increased with pressure.

Internal oscillating current-sustained RF plasmas : Parameters, stability, and potential for surface engineering

A new source of low-frequency (0.46 MHz) inductively coupled plasmas sustained by the internal planar "unidirectional" RF current driven through a specially designed internal antenna configuration has been developed. The experimental results of the investigation of the optical and global argon plasma parameters by the optical and Langmuir probes are presented. It is shown that the spatial profiles of the electron density, the effective electron temperature and plasma potential feature a great deal of the radial and axial uniformity compared with conventional sources of inductively coupled plasmas with external at coil configurations. The measurements also reveal a weak azimuthal dependence of the global plasma parameters at low values of the input RF power, which was earlier predicted theoretically. The azimuthal dependence of the global plasma parameters vanishes at high input RF powers. Moreover, under certain conditions, the plasma becomes unstable due to spontaneous transitions between low-density (electrostatic, E) and high-density (electromagnetic, H) operating modes. Excellent uniformity of high-density plasmas makes the plasma reactor promising for various plasma processing applications and surface engineering.

Discharge mode transitions in low-frequency inductively coupled plasmas with internal oscillating current sheets

Transitions between the two discharge modes in a low-frequency (∼460 kHz) inductively coupled plasma sustained by an internal oscillating radio frequency (rf) current sheet are studied. The unidirectional rf current sheet is generated by an internal antenna comprising two orthogonal sets of synphased rf currents driven in alternately reconnected copper litz wires. It is shown that in the low-to-intermediate pressure range the plasma source can be operated in the electrostatic (E) and electromagnetic (H) discharge modes. The brightness of the E -mode argon plasma glow is found remarkably higher than in inductively coupled plasmas with external flat spiral "pancake" coils. The cyclic variations of the input rf power result in pronounced hysteretic variations of the optical emission intensity and main circuit parameters of the plasma source. Under certain conditions, it appears possible to achieve a spontaneous E→H transition ("self-transition"). The observed phenomenon can be attributed to the thermal drift of the plasma parameters due to the overheating of the working gas. The discharge destabilizing factors due to the gas heating and step-wise ionization are also discussed. © 2005 American Vacuum Society.

Magnetic fields and uniformity of radio frequency power deposition in low-frequency inductively coupled plasmas with crossed internal oscillating currents

Radial and axial distributions of magnetic fields in a low-frequency (∼460 kHz)inductively coupled plasmasource with two internal crossed planar rf current sheets are reported. The internal antenna configuration comprises two orthogonal sets of eight alternately reconnected parallel and equidistant copper litz wires in quartz enclosures and generates three magnetic (H z, H r, and H φ) and two electric (E φ and E r) field components at the fundamental frequency. The measurements have been performed in rarefied and dense plasmas generated in the electrostatic(E) and electromagnetic (H)discharge modes using two miniature magnetic probes. It is shown that the radial uniformity and depth of the rf power deposition can be improved as compared with conventional sources of inductively coupled plasmas with external flat spiral (“pancake”) antennas. Relatively deeper rf power deposition in the plasma source results in more uniform profiles of the optical emission intensity, which indicates on the improvement of the plasma uniformity over large chamber volumes. The results of the numerical modeling of the radial magnetic field profiles are found in a reasonable agreement with the experimental data.

Standards that we can 'own' : Threshold Learning Outcomes for Journalism, Public Relations, and Media & Communication Studies

This paper outlines the progress by the JoMeC (Journalism, Media & Communication) Network in developing TLO (Threshold Learning Outcome) statements for Bachelor-level university programs in the disciplines of Journalism, Public Relations and Media & Communications Studies. The paper presents the finalised TLO statement for Journalism, and outlines moves to engage discipline-based groups to further develop preliminary TLOs for Public Relations and Media & Communication Studies. The JoMeC Network was formed in 2011, in response to requirements that from 2014 all degrees and qualifications at Australian universities would be able to demonstrate that they comply with the threshold learning standards set by the Australian Qualifications Framework (AQF). The AQF’s threshold standards define the minimum types and levels of knowledge, skills and capabilities that a student must demonstrate in order to graduate. The Tertiary Education Quality and Standards Agency (TEQSA) will use the AQF’s threshold standards as a key tool in recording and assessing the performance of higher educational institutions, and determining whether they should be registered as Australian Higher Education Providers under the Higher Education Standards Framework. The Office of Learning & Teaching (OLT) places the onus on discipline communities to collaborate in order to develop and ‘own’ the threshold learning standards that can be considered the minimum learning outcomes of university-level programs in that field. With the support of an OLT Grant, the JoMeC Network’s prime goal has been to develop three sets of discipline-specific TLOs – one each for the Journalism, Public Relations, and Media & Communications Studies disciplines. This paper describes the processes of research, consultation, drafting and ongoing revision of the TLO for Journalism. It outlines the processes that the JoMeC Network has taken in developing a preliminary TLO draft to initiate discussion of Public Relations and Media & Communication Studies. The JoMeC Network plans to hand management of further development of these TLOs to scholars within the discipline who will engage with academics and other stakeholders to develop statements that the respective disciplines can embrace and ‘own’.

Toward understanding the (lack of?) significance of dialogue to the practice of public relations

The public relations literature has tended to present dialogue as an idealised concept, with a focus on how it should, could, or ought to be carried out in public relations practice. There is little in extant literature that considers the significance of dialogue to the actual practice of public relations. This paper presents the findings of a qualitative study of public relations practitioners’ day-to-day work. It concludes that dialogue does not – and arguably, cannot – occur in public relations practice and instead articulates an empirically-based practitioner perspective on two-way communication, which displays pragmatic characteristics that significantly distinguish it from dialogue.

Internal calibration of gel dosimeters : a feasibility study

In this work we test the feasibility of a new calibration method for gel dosimetry. We examine, through Monte Carlo modelling, whether the inclusion of an organic plastic scintillator system at key points within the gel phantom would perturb the dose map. Such a system would remove the requirement for a separate calibration gel, removing many sources of uncertainty.

Investigating the effect of internal fixation stiffness on metaphyseal fracture healing in a mouse model

This project examined the differences in healing of metaphyseal bone, when the implants of variable stiffness are used for fracture fixation. This knowledge is important in development of novel orthopaedic implants, used in orthopaedic surgery to stabilise the fractures. Dr Koval used a mouse model to create a fracture, and then assessed its healing with a combination of mechanical testing, microcomputed tomography and histomorphometric examination.

Secondary user relations in emerging mobile computing environments

Mobile technologies are enabling access to information in diverse environ.ments, and are exposing a wider group of individuals to said technology. Therefore, this paper proposes that a wider view of user relations than is usually considered in information systems research is required. Specifically, we examine the potential effects of emerging mobile technologies on end-­‐user relations with a focus on the ‘secondary user’, those who are not intended to interact directly with the technology but are intended consumers of the technology’s output. For illustration, we draw on a study of a U.K. regional Fire and Rescue Service and deconstruct mobile technology use at Fire Service incidents. Our findings provide insights, which suggest that, because of the nature of mobile technologies and their context of use, secondary user relations in such emerging mobile environments are important and need further exploration.