The impact of institutional, instrumental and interpersonal underpinnings on network dynamics and outcomes

Networks form a key part of the infrastructure of contemporary governance arrangements and, as such, are likely to continue for some time. Networks can take many forms and be formed for many reasons. Some networks have been explicitly designed to generate a collective response to an issue; some arise from a top down perspective through mandate or coercion; while others rely more heavily on interpersonal relations and doing the right thing. In this paper, these three different perspectives are referred to as the “3I”s: Instrumental, Institutional or Interpersonal. It is proposed that these underlying motivations will affect the process dynamics within the different types of networks in different ways and therefore influence the type of outcomes achieved. This proposition is tested through a number of case studies. An understanding of these differences will lead to more effective design, management and clearer expectations of what can be achieved through networks.

Reliability driven reconfiguration of rural power distribution systems

This paper presents a reliability-based reconfiguration methodology for power distribution systems. Probabilistic reliability models of the system components are considered and Monte Carlo method is used while evaluating the reliability of the distribution system. The reconfiguration is aimed at maximizing the reliability of the power supplied to the customers. A binary particle swarm optimization (BPSO) algorithm is used as a tool to determine the optimal configuration of the sectionalizing and tie switches in the system. The proposed methodology is applied on a modified IEEE 13-bus distribution system.

Power sharing and stability enhancement of an autonomous microgrid with inertial and non-inertial DGs with DSTATCOM

This paper proposes a method of enhancing system stability with a distribution static compensator (DSTATCOM) in an autonomous microgrid with multiple distributed generators (DG). It is assumed that there are both inertial and non-inertial DGs connected to the microgrid. The inertial DG can be a synchronous machine of smaller rating while inertia less DGs (solar) are assumed as DC sources. The inertia less DGs are connected through Voltage Source Converter (VSC) to the microgrid. The VSCs are controlled by either state feedback or current feedback mode to achieve desired voltage-current or power outputs respectively. The power sharing among the DGs is achieved by drooping voltage angle. Once the reference for the output voltage magnitude and angle is calculated from the droop, state feedback controllers are used to track the reference. The angle reference for the synchronous machine is compared with the output voltage angle of the machine and the error is fed to a PI controller. The controller output is used to set the power reference of the synchronous machine. The rate of change in the angle in a synchronous machine is restricted by the machine inertia and to mimic this nature, the rate of change in the VSCs angles are restricted by a derivative feedback in the droop control. The connected distribution static compensator (DSTATCOM) provides ride through capability during power imbalance in the microgrid, especially when the stored energy of the inertial DG is not sufficient to maintain stability. The inclusion of the DSATCOM in such cases ensures the system stability. The efficacies of the controllers are established through extensive simulation studies using PSCAD.

Structural health monitoring of bridges using acoustic emission technology

Bridges are an important part of society's infrastructure and reliable methods are necessary to monitor them and ensure their safety and efficiency. Bridges deteriorate with age and early detection of damage helps in prolonging the lives and prevent catastrophic failures. Most bridges still in used today were built decades ago and are now subjected to changes in load patterns, which can cause localized distress and if not corrected can result in bridge failure. In the past, monitoring of structures was usually done by means of visual inspection and tapping of the structures using a small hammer. Recent advancements of sensors and information technologies have resulted in new ways of monitoring the performance of structures. This paper briefly describes the current technologies used in bridge structures condition monitoring with its prime focus in the application of acoustic emission (AE) technology in the monitoring of bridge structures and its challenges.

Rivalry within and between strategic networks : an investigation of the United States Automotive Industry

As a consequence of the increased incidence of collaborative arrangements between firms, the competitive environment characterising many industries has undergone profound change. It is suggested that rivalry is not necessarily enacted by individual firms according to the traditional mechanisms of direct confrontation in factor and product markets, but rather as collaborative orchestration between a number of participants or network members. Strategic networks are recognised as sets of firms within an industry that exhibit denser strategic linkages among themselves than other firms within the same industry. Based on this, strategic networks are determined according to evidence of strategic alliances between firms comprising the industry. As a result, a single strategic network represents a group of firms closely linked according to collaborative ties. Arguably, the collective outcome of these strategic relationships engineered between firms suggest that the collaborative benefits attributed to interorganisational relationships require closer examination in respect to their propensity to influence rivalry in intraindustry environments. Derived in large from the social sciences, network theory allows for the micro and macro examination of the opportunities and constraints inherent in the structure of relationships in strategic networks, establishing a relational approach upon which the conduct and performance of firms can be more fully understood. Research to date has yet to empirically investigate the relationship between strategic networks and rivalry. The limited research that has been completed utilising a network rationale to investigate competitive patterns in contemporary industry environments has been characterised by a failure to directly measure rivalry. Further, this prior research has typically embedded investigation in industry settings dominated by technological or regulatory imperatives, such as the microprocessor and airline industries. These industries, due to the presence of such imperatives, are arguably more inclined to support the realisation of network rivalry, through subscription to prescribed technological standards (eg., microprocessor industry) or by being bound by regulatory constraints dictating operation within particular market segments (airline industry). In order to counter these weaknesses, the proposition guiding research - Are patterns of rivalry predicted by strategic network membership? – is embedded in the United States Light Vehicles Industry, an industry not dominated by technological or regulatory imperatives. Further, rivalry is directly measured and utilised in research, thus distinguishing this investigation from prior research efforts. The timeframe of investigation is 1993 – 1999, with all research data derived from secondary sources. Strategic networks were defined within the United States Light Vehicles Industry based on evidence of horizontal strategic relationships between firms comprising the industry. The measure of rivalry used to directly ascertain the competitive patterns of industry participants was derived from the traditional Herfindahl Index, modified to account for patterns of rivalry observed at the market segment level. Statistical analyses of the strategic network and rivalry constructs found little evidence to support the contention of network rivalry; indeed, greater levels of rivalry were observed between firms comprising the same strategic network than between firms participating in opposing network structures. Based on these results, patterns of rivalry evidenced in the United States Light Vehicle Industry over the period 1993 – 1999 were not found to be predicted by strategic network membership. The findings generated by this research are in contrast to current theorising in the strategic network – rivalry realm. In this respect, these findings are surprising. The relevance of industry type, in conjunction with prevailing network methodology, provides the basis upon which these findings are contemplated. Overall, this study raises some important questions in relation to the relevancy of the network rivalry rationale, establishing a fruitful avenue for further research.

Assessment of tear film surface quality using dynamic-area high-speed videokeratoscopy

A new method for noninvasive assessment of tear film surface quality (TFSQ) is proposed. The method is based on high-speed videokeratoscopy in which the corneal area for the analysis is dynamically estimated in a manner that removes videokeratoscopy interference from the shadows of eyelashes but not that related to the poor quality of the precorneal tear film that is of interest. The separation between the two types of seemingly similar videokeratoscopy interference is achieved by region-based classification in which the overall noise is first separated from the useful signal (unaltered videokeratoscopy pattern), followed by a dedicated interference classification algorithm that distinguishes between the two considered interferences. The proposed technique provides a much wider corneal area for the analysis of TFSQ than the previously reported techniques. A preliminary study with the proposed technique, carried out for a range of anterior eye conditions, showed an effective behavior in terms of noise to signal separation, interference classification, as well as consistent TFSQ results. Subsequently, the method proved to be able to not only discriminate between the bare eye and the lens on eye conditions but also to have the potential to discriminate between the two types of contact lenses.

Cherbourg State School in historical context.

Cherbourg State School is some 300 kilometres northwest of Brisbane. It is situated in an Aboriginal community at Cherbourg with approximately 250 students, all of whom are Indigenous Australian children. Cherbourg State School aims to generate good academic outcomes for its students from kindergarten to Year 7 and nurture a strong and positive sense of what it means to be Aboriginal in today's society. In a context where the community continues to grapple with many social issues born of the historical processes of dispossession and disempowerment, Cherbourg State School is determined that its children can and will learn to become 'Strong and Smart'. It is a journey that has been charted by Chris Sarra, the school's first Aboriginal principal, in his paper Young and Black and Deadly: Strategies for Improving Outcomes for Indigenous Students, which describes how pride and expectations were engendered in the school over a four-year period from 1998. In this article the author discusses the historical context of the school and its impact on the Indigenous people of Cherbourg. The aim is to consider the historical, political, social and cultural context around the creation of Cherbourg State School. The author critically examines the historical records of the role of the State Government and the white settlers in the setting up and creation of the Aboriginal Reserve and later the primary school. Throughout the author addresses an absence � a voice missing from history � the voice of the Aboriginal people. This exercise in collective memory was designed to provide an opportunity for those who have seldom been given the opportunity to tell their story. Instead of the official view of Cherbourg School it provides a narrative which restores the victims of history to a place of dignity and indeed humanity.

Sensitivity analysis of voltage imbalance in distribution networks with rooftop PVs

A comprehensive voltage imbalance sensitivity analysis and stochastic evaluation based on the rating and location of single-phase grid-connected rooftop photovoltaic cells (PVs) in a residential low voltage distribution network are presented. The voltage imbalance at different locations along a feeder is investigated. In addition, the sensitivity analysis is performed for voltage imbalance in one feeder when PVs are installed in other feeders of the network. A stochastic evaluation based on Monte Carlo method is carried out to investigate the risk index of the non-standard voltage imbalance in the network in the presence of PVs. The network voltage imbalance characteristic based on different criteria of PV rating and location and network conditions is generalized. Improvement methods are proposed for voltage imbalance reduction and their efficacy is verified by comparing their risk index using Monte Carlo simulations.

Context-Based Modelling of Interferometric Signals for the Assessment of Tear-Film Suface Quality

Modelling of interferometric signals related to tear film surface quality is considered. In the context of tear film surface quality estimation in normal healthy eyes, two clinical parameters are of interest: the build-up time, and the average interblink surface quality. The former is closely related to the signal derivative while the latter to the signal itself. Polynomial signal models, chosen for a particular set of noisy interferometric measurements, can be optimally selected, in some sense, with a range of information criteria such as AIC, MDL, Cp, and CME. Those criteria, however, do not always guarantee that the true derivative of the signal is accurately represented and they often overestimate it. Here, a practical method for judicious selection of model order in a polynomial fitting to a signal is proposed so that the derivative of the signal is adequately represented. The paper highlights the importance of context-based signal modelling in model order selection.

Cross voltage control with inner hysteresis current control for multi-output boost converter

Multi-output boost (MOB) converter is a novel DC-DC converter unlike the regular boost converter, has the ability to share its total output voltage and to have different series output voltage from a given duty cycle for low and high power applications. In this paper, discrete voltage control with inner hysteresis current control loop has been proposed to keep the simplicity of the control law for the double-output MOB converter, which can be implemented by a combination of analogue and logical ICs or simple microcontroller to constrain the output voltages of MOB converter at their reference voltages against variation in load or input voltage. The salient features of the proposed control strategy are simplicity of implementation and ease to extend to multiple outputs in the MOB converter. Simulation and experimental results are presented to show the validity of control strategy.

A high voltage power converter with a frequency and voltage controller

A high voltage power converter is presented in this paper and is based on a Capacitor-Diode Voltage Multiplier (CDVM) supplied through an inverter. This power converter has the capabilities of generating variable high DC voltage with improved transient response. The simulation results which are presented in this paper verify that due to its fast transient response, this converter can be used as a high DC voltage source in many applications.

Droop control of converter interfaced micro sources in rural distributed generation

This paper proposes new droop control methods for load sharing in a rural area with distributed generation. Highly resistive lines, typical of rural low voltage networks, always create a big challenge for conventional droop control. To overcome the conflict between higher feedback gain for better power sharing and system stability in angle droop, two control methods have been proposed. The first method considers no communication among the distributed generators (DGs) and regulates the converter output voltage and angle ensuring proper sharing of load in a system having strong coupling between real and reactive power due to high line resistance. The second method, based on a smattering of communication, modifies the reference output volt-age angle of the DGs depending on the active and reactive power flow in the lines connected to point of common coupling (PCC). It is shown that with the second proposed control method, an economical and minimum communication system can achieve significant improvement in load sharing. The difference in error margin between proposed control schemes and a more costly high bandwidth communication system is small and the later may not be justified considering the increase in cost. The proposed control shows stable operation of the system for a range of operating conditions while ensuring satisfactory load sharing.

EMI in modern AC motor drive systems

In this paper, several aspects of high frequency related issues of modern AC motor drive systems, such as common mode voltage, shaft voltage and resultant bearing current and leakage currents, have been discussed. Conducted emission is a major problem in modern motor drives that produce undesirable effects on electronic devices. In modern power electronic systems, increasing power density and decreasing cost and size of system are market requirements. Switching losses, harmonics and EMI are the key factors which should be considered at the beginning stage of a design to optimise a drive system.

EMI issues in modern power electronic systems

Electromagnetic compatibility of power electronic systems becomes an engineering discipline and it should be considered at the beginning stage of a design. Thus, a power electronics design becomes more complex and challenging and it requires a good communication between EMI and Power electronics experts. Three major issues in designing a power electronic system are Losses, EMI and Harmonics. These issues affect system cost, size, efficiency and quality and it is a tradeoff between these factors when we design a power converter.

Road network extraction with new vectorization and pruning from high-resolution RS images

With the increasing resolution of remote sensing images, road network can be displayed as continuous and homogeneity regions with a certain width rather than traditional thin lines. Therefore, road network extraction from large scale images refers to reliable road surface detection instead of road line extraction. In this paper, a novel automatic road network detection approach based on the combination of homogram segmentation and mathematical morphology is proposed, which includes three main steps: (i) the image is classified based on homogram segmentation to roughly identify the road network regions; (ii) the morphological opening and closing is employed to fill tiny holes and filter out small road branches; and (iii) the extracted road surface is further thinned by a thinning approach, pruned by a proposed method and finally simplified with Douglas-Peucker algorithm. Lastly, the results from some QuickBird images and aerial photos demonstrate the correctness and efficiency of the proposed process.