A decision support system for a waste collection vehicle routing problem

The selective collection of municipal solid waste for recycling is a very complex and expensive process, where a major issue is to perform cost-efficient waste collection routes. Despite the abundance of commercially available software for fleet management, they often lack the capability to deal properly with sequencing problems and dynamic revision of plans and schedules during process execution. Our approach to achieve better solutions for the waste collection process is to model it as a vehicle routing problem, more specifically as a team orienteering problem where capacity constraints on the vehicles are considered, as well as time windows for the waste collection points and for the vehicles. The final model is called capacitated team orienteering problem with double time windows (CTOPdTW).We developed a genetic algorithm to solve routing problems in waste collection modelled as a CTOPdTW. The results achieved suggest possible reductions of logistic costs in selective waste collection.

Integrated management systems as complex adaptive systems

It is a difficult task to avoid the “smart systems” topic when discussing smart prevention and, similarly, it is a difficult task to address smart systems without focusing their ability to learn. Following the same line of thought, in the current reality, it seems a Herculean task (or an irreparable omission) to approach the topic of certified occupational health and safety management systems (OHSMS) without discussing the integrated management systems (IMSs). The available data suggest that seldom are the OHSMS operating as the single management system (MS) in a company so, any statement concerning OHSMS should mainly be interpreted from an integrated perspective. A major distinction between generic systems can be drawn between those that learn, i.e., those systems that have “memory” and those that have not. These former systems are often depicted as adaptive since they take into account past events to deal with novel, similar and future events modifying their structure to enable success in its environment. Often, these systems, present a nonlinear behavior and a huge uncertainty related to the forecasting of some events. This paper seeks to portray, for the first time as we were able to find out, the IMSs as complex adaptive systems (CASs) by listing their properties and dissecting the features that enable them to evolve and self-organize in order to, holistically, fulfil the requirements from different stakeholders and thus thrive by assuring the successful sustainability of a company. Based on the revision of literature carried out, this is the first time that IMSs are pointed out as CASs which may develop fruitful synergies both for the MSs and for CASs communities. By performing a thorough revision of literature and based on some concepts embedded in the “DNA” of the subsystems implementation standards it is intended, specifically, to identify, determine and discuss the properties of a generic IMS that should be considered to classify it as a CAS.

Development of polymer wicks for the fabrication of bio-medical sensors

Polymer based wicking structures were fabricated by sintering powders of polycarbonate (PC), ultra-high molecular weight polyethylene and polyamide 12, aiming at selecting a suitable material for an innovative electroencephalography (EEG) bio-electrode. Preliminary experiments showed that PC based wicks displayed the best mechanical properties, therefore more detailed studies were carried out with PC to evaluate the influence of powder granulometry and processing parameters (pressure, temperature and time) on the mechanical properties, porosity, mean pore radius and permeability of the wicks. It was concluded that the mechanical properties are significantly enhanced by increasing the processing time and pressure, although at the expense of a significant decrease of porosity and mean pore diameter (and thus permeability), particularly for the highest applied pressures (74kPa). However, a good compromise between porosity/permeability and mechanical properties could be obtained by sintering PC powders of particle sizes below 500μm at 165°C for 5min, upon an applied pressure of 56kPa. Moreover, PC proved to be chemically stable in contact with an EEG common used disinfectant. Thus, wicking structures with appropriate properties for the fabrication of reusable bio-electrodes could be fabricated from the sintering of PC powders.

Insatisfação com a imagem corporal após a cirurgia bariátrica: um estudo comparativo entre a cirurgia de revisão e primária

Dissertação de mestrado integrado em Psicologia (área de especialização em Psicologia Clínica e da Saúde)

Las reformas de las universidades ibéricas en la segunda mitad del siglo XVIII

Bajo los auspicios reformadores del Marqués de Pombal, los nuevos estatutos de la Universidad de Coimbra, ratificados por el rey José I en junio de 1772, representaron una importante revisión de los principales estudios en Portugal. Hacia un largo tiempo que los Estatutos de la Universidad de Coimbra no fueron revisados, y la revisión de los Estatutos de 1559 (rey Sebastián), 1591 (el rey Felipe I de Portugal, II de Castilla) y 1653 (rey João IV), se observa que, en comparación con más de dos siglos de vigencia del mismo modelo con modificaciones más o menos limitados, los Estatutos de 1772 traen un nuevo pensamiento y un nuevo impulso mediante la promoción, en particular, de la educación y el desarrollo de las Ciencias exactas y naturales y la valoración del método experimental. Al mismo tiempo, en España, el rey Carlos III, renuncia a imponer un único modelo de estudios de todas las universidades. En ambos casos, el portugués y el español, la urgencia de las reformas es mas aguda pues que los jesuitas fueron expulsados de los territorios en 1759 y 1767, respectivamente; y tanto precursores como mentores quieren estas reformas para abrir las universidades a la ciencia moderna y el humanismo de la Ilustración. La renovación de los contenidos y métodos de enseñanza en Coimbra fue notoria, con la preocupación notable con la investigación, lo que no era muy común en la época. Había también una preocupación con las necesidades de la sociedad en una forma muy práctica (habiendo sido en la época construido el Observatorio Astronómico, el Laboratorio de Física, etc.). Al mismo tempo, la universidad de Coimbra tuvo como profesores dos matemáticos notables, José Anastácio da Cunha y José Monteiro da Rocha. En España también fueron importantes los ensayos de renovación de los métodos, de apertura a la ciencia de la época, de conexión con las realidades de la sociedad española, de coordinación de esfuerzos para conformar una «comunidad universitaria española». En esta comunicación se hace una discusión de comparación entre las dos reformas ibéricas.

Gestão de inventários numa empresa de produção de linhas de costura

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

O reforço da democracia local no âmbito da reforma da administração autárquica

Dissertação de mestrado em Direito das Autarquias Locais

Biblioteca de referência de DNA barcodes de bivalves (Mollusca: Bivalvia) e gastrópodes (Mollusca: Gastropoda) da costa Portuguesa

Dissertação de mestrado em Ecologia

A prevenção de Lesões por Esforço Repetitivo (LER) nas aulas de saxofone

Relatório de estágio de mestrado em Ensino de Música

Organização do tempo do estudo musical: sugestões pedagógicas para a gestão do tempo do estudo individual do oboé

Relatório de estágio de mestrado em Ensino de Música