Work Stress and Early Atherosclerosis: Do Genetic Background and Pre-Employment Risk Factors Explain Conflicting Findings?

According to the models conceptualizing work stress, increased risk of health problems arise when high job demands co-occur with low job control (the demand-control model) or the efforts invested by the employee are disproportionately high compared to the rewards received (effort-reward imbalance model). This study examined the association between work stress and early atherosclerosis with particular attention to the role of pre-employment risk factors and genetic background in this association. The subjects were young healthy adults aged 24-39 who were participating in the 21-year follow-up of the ongoing prospective "Cardiovascular Risk in Young Finns" study in 2001-2002. Work stress was evaluated with questionnaires on demand-control model and on effort-reward model. Atherosclerosis was assessed with ultrasound of carotid artery intima-media thickness (IMT). In addition, risk for enhanced atherosclerotic process was assessed by measuring with heart rate variability and heart rate. Pre-employment risk factors, measured at age 12 to 18, included such as body mass index, blood lipids, family history of coronary heart disease, and parental socioeconomic position. Variants of the neuregulin-1 were determined using genomic DNA. The results showed that higher work stress was associated with higher IMT in men. This association was not attenuated by traditional risk factors of atherosclerosis and coronary heart disease or by pre-employment risk factors measured in adolescence. Neuregulin-1 gene moderated the association between work stress and IMT in men. A significant association between work stress and IMT was found only for the T/T genotype of the neuregulin-1 gene but not for other genotypes. Among women an association was found between higher work stress and lower heart rate variability, suggesting higher risk for developing atherosclerosis. These associations could not be explained by demographic characteristics or coronary risk factors. The present findings provide evidence for an association between work stress and atherosclerosis in relatively young population. This association seems to be modified by genetic influences but it does not appear to be confounded by pre-employment adolescent risk factors.

Childhood and adolescent antecedents of work stress and early atherosclerosis

Work stress is after musculoskeletal disorders the second most common work-related health problem in the European Union, affecting 28% of EU employees. Furthermore, a 50% excessive cardiovascular disease risk among employees with work stress is reported. High job demands combined with low job control according to the Job Demands-Job Control model, or high effort combined with low rewards according to Effort-Reward Imbalance model, are likely to produce work stress in the majority of employees. Atherosclerotic wall thickening is a validated marker of an increased risk of cardiovascular disease. This study examined the role of childhood and adolescent factors as antecedents of work stress and early atherosclerosis, and in the relationship between them. The Cardiovascular Risk in Young Finns Study, (the CRYF project) started in 1980 when the participants were at the age of three to 18 years. Follow-ups have been conducted every three years until 1992, after that in 1997 and 2001, and the latest is ongoing in 2008. The participants parents reported their socioeconomic position in 1980 and 1983, and their life satisfaction in 1983. Biological risk factors were measured in 1980 and 2001. Type A behaviour was reported in 1986, 1989 and 2001. In the 2001 follow-up when the participants were aged 24 to 39, work stress was assessed from responses to questionnaires on job demands-job control and effort-reward imbalance, and education. Ultrasound measurement of the carotid intima-media thickness (CIMT) was used to assess atherosclerosis. There were 755, 746, 1014 and 494 participants in studies I-IV, respectively. The results showed that low parental socioeconomic position and parental life dissatisfaction during childhood and adolescence predicted higher levels of job strain 18 years later, and that education mediated the relationship between parental socioeconomic position and job strain. Childhood and adolescent family factors were not related to the effort-reward imbalance. Parental life satisfaction was associated with high rewards at work among the men, and high parental socioeconomic position was associated with high reward among the women. Among the men, the eagerness-energy component of Type A behaviour across different developmental periods predicted increased CIMT. Among the women, hard-driving component of Type A behaviour predicted decreased CIMT. Low leadership characteristic in adolescence and early adulthood was associated with both high job strain and increased CIMT, and attenuated the relationship between job strain and CIMT to non-significance in men. The current findings add to the literature on the relationship between job strain and health literature in adopting a developmental perspective. The results imply that work stress does not completely originate from work. There are childhood and adolescent environmental and dispositional effects on work stress and CIMT several years later, and these partly seem to operate through educational attainment.

Koulukasvatusta teknologisoituvaan yhteiskuntaan : Kansakoulun opetussuunnitelman rakentuminen, 1945-1952

Education for a Technological Society. Public School Curriculum Construction, 1945-1952. The subject of my research is the significance of technology in the construction process of the public school curriculum during the years 1945-1952. During the period the war reparation and rebuilding placed demands and actions to rationalise and dramatise industry and agriculture. Thereby the ambitions of building a technological country and the reformation of curriculum took place simultaneously. Fordistian terms of reference, of which the principles were mass production, rationalisation and standardisation, a hierarchical division of labour and partition of assignments, provided a model for the developing curriculum. In the research the curriculum is examined as an artefact, which shapes socio-technically under the influence of social and technical factors. In the perspective of socio-technical construction the artefact is represented by the viewpoints of members of relevant social groups. The groups give meaning to the curriculum artefact, which determines the components of the curriculum. The weakness of the curriculum was its ineffectiveness, which was due to three critical problems. Firstly, the curriculum was to be based on scientific work, which meant the development of schools through experiments and scientific research. Secondly, the civilised conseption in the curriculum was to be composed of theoretical knowledge, as well as practical skills. Practical education was useful for both the individual and society. Thirdly, the curriculum was to be reformed in a way that the individuality of the pupil would be taken into account. It was useful for the society that talents and natural abilities of every pupil were observed and used to direct the pupil to the proper place in the social division of labour, according to the "right man in a right place" principle. The solutions to critical problems formed the instructions of the public school curriculum, which described the nature and content of education. Technology and its development were on essential part of the whole school curriculum process. The quality words connected to the development of technology - progress, rationality and effectiveness - were also suitable qualifiers and reasons for the reform of the curriculum. On the other hand, technology set a point of comparison and demand for the development of all phases of education. The view of technology was not clearly deterministic - it was also possible to shape technological society with the help of education. The public school curriculum process indicates how originally the principles of technological systems were shaped to the language of education and accepted in educational content.

Käsityökohtaamisia muinaisuuden kanssa : Neulalla neulominen eli kinnasneulatekniikka ...muutakin kuin neulakinnas?

The aim of this study was to find out how the technique of knotless netting is perceived by the craftsperson of the twenty first century. In this study the craftspeople are represented by the researcher herself, seven craftspeople and teachers (3) teaching knotless netting as well as their students (21). The main interests of this study are the mental pictures and relationship to knotless netting that craftspeople have in the twenty first century. Points of focus are also the specific characteristics of knotless netting, as well as experimenting with new and different materials. The aim of these experiments has been to find new and unusual uses for knotless netting. Preserving knotless netting as a craft and technique are also questions dealt with in this study. The methodology of this study is a qualitative and phenomenographic study of several cases. The data collected are interviews of the teachers, observations in two knotless netting courses, questionnaires answered by the students in these courses and experimental samples made by the author and evaluated by other craftspeople. These samples were made during the years 2005-2008. The interviews, questionnaires and evaluations were conducted under winter and spring 2008. The reference literature is comprised from publications in several different fields. In this study ethnography is the most dominant field of reference due to the fact that knotless netting is so strongly linked to history and antiquity. In the past the technique of knotless netting has been passed down from generation to generation in whatever form the teacher has known. There are many different ways of stitching and binding in knotless netting. This technique is closely connected to traditional knotless netting mittens even today. Nowadays knotless knitting is taught in craft schools, evening classes and in other recreational courses. The concrete understanding of knotless netting by means of two-dimensional instructions is challenging. Craftspeople often require somebody to actually demonstrate the correct way to make the stitches and hold the work before they can proceed with the technique. The way knotless netting is perceived by craftspeople is linked to their backgrounds and preconstructed mental images concerning the technique. An etnographer approaches knotless netting in a different way from a crafts-scientist or a person in an evening class wishing to master the technique. The attitude of the teacher is passed on to students and also affects the way the student perceives knotless netting and its possibilities as a technique. A craftsperson has mixed feelings toward knotted netting. On the other hand the surfaces produced by this rare technique are intriguing but the costs due to the slow manufacturing process are seen as an encumbrance.

Oikein, nurin - miten Suomessa kudin : Tutkimus neulonnan työotteista.

The aim of this work was to study what kind of working grips people use to knit in Finland and decide if one grip is superior to others. I investigated how knitters have adopted their grips and how they experience their knitting. I also explored whether it is possible to change one's grip. To provide a theoretical basis for the research I observed knitting in terms of culture, skill and ergonomics. The first part of the study material comprised video recordings of the grips of 95 knitters together with background information collected via a questionnaire during the education of craft teachers at the University of Helsinki in spring 2004, 2005 and 2006. Using the data obtained I focused on three knitters, whose grip of the knitting needles clearly differed from the ergonomically good grip. In addition to them I interviewed one student, who had changed over to more ergonomic way of knitting after participating in the first part of this study. In this respect my study is a several events' case study. In order to analyse my data I used both qualitative and quantitative content analysis methods to complement each other. Most of my research participants had learned to knit in first years of elementary school or comprehensive school. Almost everyone had adopted the basics of knitting by imitating, and many of them had corrected "incorrect" positions from verbal instructions. Through practice the imitated position had gradually become the style unique to each knitter. The findings showed that students' background in knitting is quite varied due to the diverse level of craft teaching. This is reflected in their knitting grips and their interest in knitting. Students do not think that there is one right working grip. The most important thing is that working seems as fluent and relaxed as possible, at which point knitting is easy and flows freely. They often consider their own style so pleasing and well-functioning that they do not think there could be any room for improvement. This study pointed out that, while it is possible to change a knitter's working grip, there is a bigger challenge in acknowledging weaknesses in one's know how. According to the results of my research, the most common working grip among Finnish knitters' corresponds with the grip that has been described as ergonomically good. Over one third of all participants knitted this way. Hands keep the knitting firmly but without tension. The forefinger that guides the yarn from the ball rests gently against the knitting needle, and the yarn goes in front of the first joint of the forefinger. The position of the hands and loops is the same as in the ergonomically good grip, i.e. the fingertips of both hands and the loops are near the tips of the knitting needles, so that the fingers only have to move small distances. When knitters purl and plain, they commonly pick up the yarn from the back of the knitting needle in the same way as when knitting. While researching the common features of working grips I have learned what abnormal grips are like. Although I recognized many different ways to knit, all the peculiar grips were modifications of the continental way of knitting. The results of this study give a clear picture of those points knitters should focus their attention on in order to gain a good hold of the needles.

Self-reported bruxism : Associated factors among media personnel with or without irregular shift work

Tutkimuksen kohderyhmänä oli mediatyöntekijöitä, joiden toimenkuva on viime vuosina muuttunut yhä kuormittavammaksi epäsäännöllisen vuorotyön sekä jatkuvien teknisten, organisatoristen ja taloudellisten tekijöiden ristipaineessa. Väitöskirjatutkimus on osa laajempaa tutkimushanketta, joka suunniteltiin selvittämään epäsäännöllisen vuorotyön mahdollisia haittoja. Tutkimusta tukivat taloudellisesti Työsuojelurahasto ja Suomen Hammaslääkäriseura Apollonia sekä resurssipanostuksin Hammaslääketieteen laitos (HY), Työterveyslaitos ja Yleisradio Oy. Bruksismi on tahdosta riippumatonta hampaiden narskuttelua tai yhteenpuristamista. Hampaiden narskuttelu on rytmistä jaksoittain toistuvaa puremalihasten toimintaa, joka esiintyy nukkuessa -tavallisimmin kevyen unen ja havahtumisjaksojen yhteydessä. Valveilla ollessa bruksismi on terveillä ihmisillä lähinnä hampaiden yhteenpuristamista. Yleisen käsityksen mukaan toistuvaa unibruksismia esiintyy noin 10 %:lla ja valveilla tapahtuvaa hampaiden yhteenpuristamista noin 20 %:lla. Aiemmin bruksismi kuului kansainvälisen unihäiriöluokituksen (ICSD 1997) mukaan unen erityishäiriöihin, mutta tuorein luokitus (ICSD 2005) listaa sen unen liikehäiriöihin. Väitöstutkimuksen yleisenä tavoitteena oli kartoittaa koetun bruksismin ja uni- valvehäiriöiden yhteyttä. Tutkimus oli poikittainen vertailututkimus epäsäännöllistä vuorotyötä ja säännöllisiä päivävuoroja tekevien välillä. Mielenkiinto kohdistui myös bruksismin ja kasvojen alueen kivun mahdolliseen yhteyteen. Lisäksi tutkimuksessa selvitettiin joidenkin tunnetusti unen laatua huonontavien psykososiaalisten, neurologisten ja fysiologisten tekijöiden yhteyttä koettuun bruksismiin. Tutkimuksen kohderyhmän muodosti 750 Yleisradion epäsäännöllistä vuorotyötä tekevää työntekijää. Vertailuryhmänä käytettiin samansuuruista satunnaistetusti valittua kaltaistettua Yleisradion työntekijäjoukkoa, joka tekee samankaltaista työtä, mutta säännöllisenä päivätyönä. Kohderyhmälle lähetettiin kyselylomakkeet, jotka kartoittivat koetun bruksismin lisäksi mm. tutkittavien taustatiedot, yleisen terveydentilan, yleisiä koettuja stressioireita ja tuntemuksia, kipuoireita, sekä unen laatua. Lisäksi esitettiin jaksamista ja työympäristöä koskevia kysymyksiä. Kyselyyn vastasi kaikkiaan 874 henkilöä. Kokonaisvastausprosentti oli 58,3 % (53,7 % miehiä). Epäsäännöllistä vuorotyötä tekevien vastausprosentti oli 82,3 % ja säännöllistä päivätyötä tekevien ryhmässä 34,3 %. Työtehtävät sisälsivät ohjelmien toimitus- ja tuottamistyötä, teknistä tuotanto- ja tukityötä, sekä esimies- ja hallintotyötä. Miesten keski-ikä vuorotyöryhmässä oli 45,0 (± 10,6) vuotta ja naisten keski-ikä 42,6 (± 10,7) vuotta, vastaavat luvut päivätyötä tekeville olivat 47,4 (± 9,7) ja 45,5 (± 10,1) vuotta. Vuorotyötä tekevistä oli miehiä 56,6 %, päivätyöryhmässä miehien osuus oli 46,7 %. Usein koettua bruksismia havaittiin koko tutkimusjoukossa 10,6 %:lla. Bruksismin esiintyvyydessä ei ollut merkitsevää eroa epäsäännöllistä vuorotyötä ja päivätyötä tekevien välillä. Kun bruksismia ja stressiä arvioitiin suhteessa tyytyväisyyteen nykyiseen työaikamuotoon, molemmat olivat merkitsevästi vallitsevimpia niillä, jotka halusivat vaihtaa nykyistä työaikamuotoaan. Epäsäännöllistä vuorotyötä tekevät lisäksi ilmoittivat kokevansa enemmän stressiä kuin päivätyötä tekevät sekä olivat tyytymättömämpiä työaikamuotoonsa. Tutkittavista henkilöistä katkonaista unta esiintyi 43,6 %:lla sekä 36,2 % koki unensa virkistämättömäksi. Kasvokipua esiintyi 19,6 %:lla. Usein toistuva bruksaus sekä tyytymättömyys työaikamuotoon olivat erittäin merkitsevästi yhteydessä unihäiriöiden sekä riittämättömän unen oireiden kanssa. Bruksismi ja katkonainen uni osoittautuivat myös kasvokivun taustatekijöiksi. Tutkimus osoitti, että koetulla bruksismilla oli merkitsevä yhteys unihäiriöihin, kasvokipuun, koettuun stressiin ja ahdistuneisuuteen, nuorempaan ikään, runsaampiin hammaslääkäri- ja lääkärikäynteihin sekä siihen että oli tyytymätön työaikamuotoonsa (itse työaikamuoto ei ollut merkitsevä tekijä). Tutkimuksen yhtenä johtopäätöksenä todettiin, että koettu bruksismi voi terveillä työikäisillä henkilöillä olla osa stressaavaa tilannetta ja siihen liittyvää käyttäytymistä. Tämän tiedostaminen terveydenhuollossa voisi olla hyödyllistä.

Cancer survivors at work : Work-related problems and factors associated with their employment, work ability and social support from the work community

Due to the improved prognosis of many forms of cancer, an increasing number of cancer survivors are willing to return to work after their treatment. It is generally believed, however, that people with cancer are either unemployed, stay at home, or retire more often than people without cancer. This study investigated the problems that cancer survivors experience on the labour market, as well as the disease-related, sociodemographic and psychosocial factors at work that are associated with the employment and work ability of cancer survivors. The impact of cancer on employment was studied combining the data of Finnish Cancer Registry and census data of the years 1985, 1990, 1995 or 1997 of Statistics Finland. There were two data sets containing 46 312 and 12 542 people with cancer. The results showed that cancer survivors were slightly less often employed than their referents. Two to three years after the diagnosis the employment rate of the cancer survivors was 9% lower than that of their referents (64% vs. 73%), whereas the employment rate was the same before the diagnosis (78%). The employment rate varied greatly according to the cancer type and education. The probability of being employed was greater in the lower than in the higher educational groups. People with cancer were less often employed than people without cancer mainly because of their higher retirement rate (34% vs. 27%). As well as employment, retirement varied by cancer type. The risk of retirement was twofold for people having cancer of the nervous system or people with leukaemia compared to their referents, whereas people with skin cancer, for example, did not have an increased risk of retirement. The aim of the questionnaire study was to investigate whether the work ability of cancer survivors differs from that of people without cancer and whether cancer had impaired their work ability. There were 591 cancer survivors and 757 referents in the data. Even though current work ability of cancer survivors did not differ between the survivors and their referents, 26% of cancer survivors reported that their physical work ability, and 19% that their mental work ability had deteriorated due to cancer. The survivors who had other diseases or had had chemotherapy, most often reported impaired work ability, whereas survivors with a strong commitment to their work organization, or a good social climate at work, reported impairment less frequently. The aim of the other questionnaire study containing 640 people with the history of cancer was to examine extent of social support that cancer survivors needed, and had received from their work community. The cancer survivors had received most support from their co-workers, and they hoped for more support especially from the occupational health care personnel (39% of women and 29% of men). More support was especially needed by men who had lymphoma, had received chemotherapy or had a low education level. The results of this study show that the majority of the survivors are able to return to work. There is, however, a group of cancer survivors who leave work life early, have impaired work ability due to their illness, and suffer from lack of support from their work place and the occupational health services. Treatment-related, as well as sociodemographic factors play an important role in survivors' work-related problems, and presumably their possibilities to continue working.

Musculoskeletal disorders and psychosocial factors at work : Effects of a participatory ergonomics intervention in a cluster randomized controlled trial

This study examined the efficacy of a participatory ergonomics intervention in preventing musculoskeletal disorders (MSDs) and changing unsatisfactory psychosocial working conditions among municipal kitchen workers. The occurrence of multiple-site musculoskeletal pain (MSP) and associations between MSP and psychosocial factors at work over time were studied secondarily. A cluster randomized controlled trial was conducted during 2002-2005 in 119 municipal kitchens with 504 workers. The kitchens were randomized to an intervention (n = 59) and control (n = 60) group. The intervention lasted 11 to 14 months. The workers identified strenuous work tasks and sought solutions for decreasing physical and mental workload. The main outcomes were the occurrence of and trouble caused by musculoskeletal pain in seven anatomical sites, local musculoskeletal fatigue after work, and musculoskeletal sick leaves. Psychosocial factors at work (job control, skill discretion, co-worker relationships, supervisor support, mental strenuousness of work, hurry, job satisfaction) and mental stress were studied as intermediate outcomes of the intervention. Questionnaire data were collected at three months intervals during the intervention and the one-year post-intervention follow-up. Response rates varied between 92 % and 99 %. In total, 402 ergonomic changes were implemented. In the control group, 80 changes were spontaneously implemented within normal activity. The intervention did not reduce perceived physical workload and no systematic differences in any health outcomes were found between the intervention and control groups during the intervention or during the one-year follow-up. The results suggest that the intervention as studied in the present trial was not more effective in reducing perceived physical workload or preventing MSDs compared with no such intervention. Little previous evidence of the effectiveness of ergonomics interventions in preventing MSDs exists. The effects on psychosocial factors at work were adverse, especially in the two of the participating cities where re-organization of foodservices timed simultaneously with the intervention. If organizational reforms at workplace are expected to occur, the execution of other workplace interventions at the same time should be avoided. The co-occurrence of musculoskeletal pain at several sites is observed to be more common than pain at single anatomical sites. However, the risk factors of MSP are largely unknown. This study showed that at baseline, 73 % of the women reported pain in at least two, 36 % in four or more, and 10 % in six to seven sites. The seven pain symptoms occurred in over 80 different combinations. When co-occurrence of pain was studied in three larger anatomical areas (neck/low back, upper limbs, lower limbs), concurrent pain in all three areas was the most common combination (36 %). The 3-month prevalence of MSP (≥ 3 of seven sites) varied between 50 % and 61 % during the two-year follow-up period. Psychosocial factors at work and mental stress were strong predictors for MSP over time and, vice versa, MSP predicted psychosocial factors at work and mental stress. The reciprocality of the relationships implies either two mutually dependent processes in time, or some shared common underlying factor(s).

Design and testing of stand-specific bucking instructions for use on modern cut-to-length harvesters

This study addresses three important issues in tree bucking optimization in the context of cut-to-length harvesting. (1) Would the fit between the log demand and log output distributions be better if the price and/or demand matrices controlling the bucking decisions on modern cut-to-length harvesters were adjusted to the unique conditions of each individual stand? (2) In what ways can we generate stand and product specific price and demand matrices? (3) What alternatives do we have to measure the fit between the log demand and log output distributions, and what would be an ideal goodness-of-fit measure? Three iterative search systems were developed for seeking stand-specific price and demand matrix sets: (1) A fuzzy logic control system for calibrating the price matrix of one log product for one stand at a time (the stand-level one-product approach); (2) a genetic algorithm system for adjusting the price matrices of one log product in parallel for several stands (the forest-level one-product approach); and (3) a genetic algorithm system for dividing the overall demand matrix of each of the several log products into stand-specific sub-demands simultaneously for several stands and products (the forest-level multi-product approach). The stem material used for testing the performance of the stand-specific price and demand matrices against that of the reference matrices was comprised of 9 155 Norway spruce (Picea abies (L.) Karst.) sawlog stems gathered by harvesters from 15 mature spruce-dominated stands in southern Finland. The reference price and demand matrices were either direct copies or slightly modified versions of those used by two Finnish sawmilling companies. Two types of stand-specific bucking matrices were compiled for each log product. One was from the harvester-collected stem profiles and the other was from the pre-harvest inventory data. Four goodness-of-fit measures were analyzed for their appropriateness in determining the similarity between the log demand and log output distributions: (1) the apportionment degree (index), (2) the chi-square statistic, (3) Laspeyres quantity index, and (4) the price-weighted apportionment degree. The study confirmed that any improvement in the fit between the log demand and log output distributions can only be realized at the expense of log volumes produced. Stand-level pre-control of price matrices was found to be advantageous, provided the control is done with perfect stem data. Forest-level pre-control of price matrices resulted in no improvement in the cumulative apportionment degree. Cutting stands under the control of stand-specific demand matrices yielded a better total fit between the demand and output matrices at the forest level than was obtained by cutting each stand with non-stand-specific reference matrices. The theoretical and experimental analyses suggest that none of the three alternative goodness-of-fit measures clearly outperforms the traditional apportionment degree measure. Keywords: harvesting, tree bucking optimization, simulation, fuzzy control, genetic algorithms, goodness-of-fit