The Culture of Women's Housework : A Case Study of Bihar, India

This study examines gendered housework in India, particularly in Bihar. The perspective adopted in the study was in part derived from the data but also from sociological literature published both in Western countries and in India. The primary attention is therefore paid to modern and traditional aspects in housework. The aim is not to compare Indian practices to those of Western societies, but rather to use Western studies as a fruitful reference point. In that light, Indian housework practices appear to be traditional. Consequently, traditions are given a more significant role than is usually the case in studies on gendered housework, particularly in Western countries. The study approaches the topic mainly from the socio-cultural perspective; this provides the best means to understand the persistence of traditional habits in India. To get a wide enough picture of the division of labour, three methods were applied in the study: detailed time-use data, questionnaire and theme interviews. The data were collected in 1988 in two districts of Bihar, one rural and the other urban. The different data complement each other well but also bring to light contradictory findings: on a general level Biharian people express surprisingly modern views on gender equality but when talking in more detail (theme interviews) the interviewees told about how traditional housework practices still were in 1988. In the analysis of the data set four principal themes are discussed. Responsibility is the concept by which the study aims at understanding the logic of the argumentation on which the persistence of traditional housework practices is grounded. Contrary to the Western style, Biharian respondents appealed not to the principle of choice but to their responsibility to do what has to be done. The power of tradition, the early socialization of children to the traditional division of labour and the elusive nature of modernity are all discussed separately. In addition to the principle of responsibility, housework was also seen as an expression of affection. This was connected to housework in general but also to traditional practices. The purity principle was the third element that made Biharian interviewees favour housework in general, but as in the case of affection it too was interwoven with traditional practices. It seems to be so that if housework is in general preferred, this leads to preferring the traditional division of labour, too. The same came out when examining economic imperatives. However, the arguments concerning them proved to be rational. In analysing them it became clear that the significance of traditions is also much dependent on the economics: as far as the average income in India is very low, the prevalence of traditional practices in housework will continue. However, to make this work, cultural arguments are required: their role is to mediate more smoothly the iron rules of the economy. Key words: family, gendered housework, division of labour, responsibility, family togetherness, emotion, economy of housework, modernity, traditionality

“Empire is a state of mind” – Imagining Eurasia in Russia –

Työssäni tarkastelen venäläistä neo-euraasianistista liikettä ja tapoja joilla liikkeen aktivistit rakentavat Euraasiasta yhtenäistä kokonaisuutta ja imperiumia. Keskeisiä tutkimuskysymyksiäni ovat: Mikä imperiumi on ja mitkä ovat sen keskeisiä motivaatioita ja teemoja? Kuinka imperiumin idea rakentuu tai käsitetään ja tämän voi tulkita? Minkälaisia seurauksia voi tulkita heidän tavallaan Euraasia nähdä olevan? Materiaalina käytän haastatteluja, jotka on kerätty Moskovassa keväällä 2008, ja liikkeen kirjallisia tuotoksia (lehdet ja Internet -sivut). Neo-euraasianistisella liikkeellä tarkoitan tässä työssä Kansainvälistä Euraasianistista liikettä (Meždunarodnoe Evrazijskoe Dviženie) ja sen alahaaraa Euraasianistista Nuorisoliittoa (Evrazijskij Sojuz Molodëži). Liike perustettiin virallisesti 2003, mutta rakentaa vahvasti historiallista yhteyttä 1930 -luvun klassiseen eurasianismiin. Tämän lisäksi sen diskurssissa on paljon neuvostoliittolaisia, fasistisia, uuskonservatiivisia ja nationalistisia piirteitä. Liikkeen johtohahmo on filosofi-geopoliitikko Alexandr Dugin. Työn tausta-ajatuksena minua kiinnostaa etenkin nk. älymystön tai intelligenttien vaikutus nationalismiin tai sosiaalisia ryhmiä määrittelevien diskurssien kehitykseen ja muutokseen.Tarkastelen materiaalia diskurssianalyyttisesta näkökulmasta. Näen diskurssianalyysin sen tutkimisena, miten sosiaalista todellisuutta tuotetaan erilaisissa sosiaalisissa käytännöissä. Samalla näiden diskurssien tutkiminen, foucautlaisen perinteen myötä, tarkastelee kriittisesti niiden tuottamia (aktualisoituneita sekä potentiaalisia) valtasuhteita. Käytän työssäni myös Benedict Andersonin kuvitellun yhteisön (imagined communities) käsitettä, joka auttaa hahmottamaan tapaa, jolla tutkimuskohteeni rakentavat imperiumia yhteisönä. Aktivistien puheessa imperiumi (imperiâ) tulee esiin pääasiallisesti positiivisesti ja ”heidän omanaan,” kun taas termi imperialismi (imperializm) pääosin negatiivisena, liittyen etenkin keskeisenä vihollisena pidettyihin Yhdysvaltoihin. Esiin nousee monta toisiinsa liittyvää teemaa, jotka jaottelen viideksi pääteemaksi. Näistä tarkastelen lähemmin imperiumia ”kaikkien kansojen hyväntekijänä (poliittinen puoli)”, ulkoisen voiman lähteenä (historiallis-geopoliittinen puoli) sekä kollektiivisen subjektin luojana (imperialistis-nationalistinen puoli). Pyrin kontekstualisoimaan diskurssin ja tarkastelemaan tapoja, joilla se ammentaa motiiveja myös historiallis-kulttuurisista tavoista hahmottaa aluetta ja sen asukkaita. Käsittelen myös kansan, kansakunnan, etnoksen ja nationalismin käsitteitä ja sitä, miten ne nousevat neo-eurasianistisessa diskursissa esiin. Imperiaalisen nationalismin (imperskij nacionalizm) käsite auttaa ymmärtämään niitä tapoja, jolla liike tekee sekä pesäeroa nationalismiin että samalla hyödyntää monia nationalistisen diskurssin perusteemoja. Eräs liikkeen diskurssin keskeisistä eroista niin sanottuun nationalismin valtavirtaan on ”kansakunnan (naciâ)” käsitteen vahva negatiivinen konnotaatio. Sen vastakohtana esiin nostetaan vahvasti kansan (narod) käsite. Samalla kuitenkin etnisen venäläisen (russkij) käsitettä käytetään tavallista laajemmin ja kattavammin kuin tavallisesti, ja ennen kaikkea Venäjä nousee imperiumin keskeisimmäksi tekijäksi. Euraasialaiseen imperiumiin liitetyistä positiivistista mielikuvista käsittelen tarkemmin monikansallisuuden ja kansojen kodin ideaa, joka nousee mielestäni huomattavaksi retoriseksi taustaksi kaikessa materiaalissa. Tähän liittyy vahvasti myös saman teeman sivujuonne, eli imperiumin ”vapauttava” rooli. Tulkitsen, että liikkeen imperiumi -diskurssilla on instrumentaalinen luonne: se legitimoi aktivistien vaatimuksia varsinkin entisen Neuvostoliiton alueen suhteen. ”Euraasialaisen kansan” ajatus toimii mahdollisena Euraasiaa yhteisenä tekijänä ”Neuvostokansan” tilalla. Sen taustalla materiaalistani päätellen siintävät kuitenkin enemmänkin Venäjä ja venäläis -spesifit vaateet kuin koko Euraasia. Pohdin myös kansakunnan (nation) hyljeksimisen syitä ja käsitteen sopivuutta Venäjälle, kuten myös venäläisyyden käsitteiden kerrostuneisuutta. Kokonaisuudessaan imperiumi tuli esiin abstraktina, utopistisena ja ”totaalisena” kokonaisuutena.

Time Dimension in Consumers’ Image Construction Processes: Introducing Image Heritage and Image-in-use

This paper focuses on the time dimension in consumers’ image construction processes. Two new concepts are introduced to cover past consumer experiences about the company – image heritage, and the present image construction process - image-in-use. Image heritage and image-in-use captures the dynamic, relational, social, and contextual features of corporate image construction processes. Qualitative data from a retailing context were collected and analysed following a grounded theory approach. The study demonstrates that consumers’ corporate images have long roots in past experiences. Understanding consumers’ image heritage provides opportunities for understanding how consumers might interpret management initiatives and branding activities in the present.

Towards real-time understanding of processes in pharmaceutical powder technology

There is a need for better understanding of the processes and new ideas to develop traditional pharmaceutical powder manufacturing procedures. Process analytical technology (PAT) has been developed to improve understanding of the processes and establish methods to monitor and control processes. The interest is in maintaining and even improving the whole manufacturing process and the final products at real-time. Process understanding can be a foundation for innovation and continuous improvement in pharmaceutical development and manufacturing. New methods are craved for to increase the quality and safety of the final products faster and more efficiently than ever before. The real-time process monitoring demands tools, which enable fast and noninvasive measurements with sufficient accuracy. Traditional quality control methods have been laborious and time consuming and they are performed off line i.e. the analysis has been removed from process area. Vibrational spectroscopic methods are responding this challenge and their utilisation have increased a lot during the past few years. In addition, other methods such as colour analysis can be utilised in noninvasive real-time process monitoring. In this study three pharmaceutical processes were investigated: drying, mixing and tabletting. In addition tablet properties were evaluated. Real-time monitoring was performed with NIR and Raman spectroscopies, colour analysis, particle size analysis and compression data during tabletting was evaluated using mathematical modelling. These methods were suitable for real-time monitoring of pharmaceutical unit operations and increase the knowledge of the critical parameters in the processes and the phenomena occurring during operations. They can improve our process understanding and therefore, finally, enhance the quality of final products.

Talking About Time in Russian and Finnish

In this study I look at what people want to express when they talk about time in Russian and Finnish, and why they use the means they use. The material consists of expressions of time: 1087 from Russian and 1141 from Finnish. They have been collected from dictionaries, usage guides, corpora, and the Internet. An expression means here an idiomatic set of words in a preset form, a collocation or construction. They are studied as lexical entities, without a context, and analysed and categorized according to various features. The theoretical background for the study includes two completely different approaches. Functional Syntax is used in order to find out what general meanings the speaker wishes to convey when talking about time and how these meanings are expressed in specific languages. Conceptual metaphor theory is used for explaining why the expressions are as they are, i.e. what kind of conceptual metaphors (transfers from one conceptual domain to another) they include. The study has resulted in a grammatically glossed list of time expressions in Russian and Finnish, a list of 56 general meanings involved in these time expressions and an account of the means (constructions) that these languages have for expressing the general meanings defined. It also includes an analysis of conceptual metaphors behind the expressions. The general meanings involved turned out to revolve around expressing duration, point in time, period of time, frequency, sequence, passing of time, suitable time and the right time, life as time, limitedness of time, and some other notions having less obvious semantic relations to the others. Conceptual metaphor analysis of the material has shown that time is conceptualized in Russian and Finnish according to the metaphors Time Is Space (Time Is Container, Time Has Direction, Time Is Cycle, and the Time Line Metaphor), Time Is Resource (and its submapping Time Is Substance), Time Is Actor; and some characteristics are added to these conceptualizations with the help of the secondary metaphors Time Is Nature and Time Is Life. The limits between different conceptual metaphors and the connections these metaphors have with one another are looked at with the help of the theory of conceptual integration (the blending theory) and its schemas. The results of the study show that although Russian and Finnish are typologically different, they are very similar both in the needs of expression their speakers have concerning time, and in the conceptualizations behind expressing time. This study introduces both theoretical and methodological novelties in the nature of material used, in developing empirical methodology for conceptual metaphor studies, in the exactness of defining the limits of different conceptual metaphors, and in seeking unity among the different facets of time. Keywords: time, metaphor, time expression, idiom, conceptual metaphor theory, functional syntax, blending theory

Factors related to seat belt use : A Turkish case

Seat belts are effective safety devices used to protect car occupants from severe injuries and fatalities during road vehicle accidents. Despite the proven effectiveness of seat belts, seat belt use rates are quite low, especially in developing countries, such as Turkey. The general aim of the present study was to investigate a large variety of factors related to seat belt use among Turkish car occupants using different perspectives and methods and therefore, to contribute to the design of effective seat belt use interventions for increasing seat belt use rates in Turkey. Five sub-studies were conducted within the present study. In the first sub-study, environmental (e.g., road type) and psycho-social factors (e.g., belt use by other car occupants) related to the seat belt use of front-seat occupants were investigated using observation techniques. Being male, of a young age, and traveling on city roads were the main factors negatively related to seat belt use. Furthermore, seat belt use by the drivers and front-seat passengers was highly correlated and a significant predictors of each other. In the second sub-study, the motivations of the car occupants for seat belt use and non-use were investigated using interview techniques. Situational conditions, such as traveling on city roads and for short distances, and not believing in the effectiveness and relevance of seat belt use for safety, were the most frequently reported reasons for not using a seat belt. Safety, habit and avoiding punishment were among the most frequently reported reasons for using a seat belt. In the third sub-study, the Theory of Planned Behavior (TPB) and the Health Belief Model (HBM) were applied to seat belt use using Structural Equation Modeling techniques. The TPB model showed a good fit to the data, whereas the HBM showed a poor fit to the data. Within the TPB model, attitude and subjective norm were significant predictors of intentions to use a seat belt on both urban and rural roads. In the fourth sub-study, seat belt use frequency and motivations for seat belt use among taxi drivers were investigated and compared between free-time and work-time driving using a survey. The results showed that taxi drivers used seat belts more when driving a private car in their free-times compared to when driving a taxi during their work-times. The lack of a legal obligation to use a seat belt in city traffic and fear of being attacked or robbed by the passengers were found as two specific reasons for not using a seat belt when driving a taxi. Lastly, in the fifth sub-study, the relationship of seat belt use to driver and health behaviors was investigated using a survey. Although seat belt use was related both to health and driver behaviors, factor analysis results showed that it grouped with driver behaviors. Based on the results of the sub-studies, a tentative empirical model showing different predictors of seat belt use was proposed. According to the model, safety and normative motivations and perceived physical barriers related to seat belt use are the three important predictors of seat belt use. Keywords: Seat belt use; environmental factors; psycho-social factors; safety and normative motivations; the Theory of Planned Behavior; the Health Belief Model; health behaviors; driver behaviors; front-seat occupants; taxi drivers; Turkey.

Methodological and Empirical Advances in the Quantitative Analysis of Spontaneous Responses in Psychophysiological Time Series

The aim of the present study was to advance the methodology and use of time series analysis to quantify dynamic structures in psychophysiological processes and thereby to produce information on spontaneously coupled physiological responses and their behavioral and experiential correlates. Series of analyses using both simulated and empirical cardiac (IBI), electrodermal (EDA), and facial electromyographic (EMG) data indicated that, despite potential autocorrelated structures, smoothing increased the reliability of detecting response coupling from an interindividual distribution of intraindividual measures and that especially the measures of covariance produced accurate information on the extent of coupled responses. This methodology was applied to analyze spontaneously coupled IBI, EDA, and facial EMG responses and vagal activity in their relation to emotional experience and personality characteristics in a group of middle-aged men (n = 37) during the administration of the Rorschach testing protocol. The results revealed new characteristics in the relationship between phasic end-organ synchronization and vagal activity, on the one hand, and individual differences in emotional adjustment to novel situations on the other. Specifically, it appeared that the vagal system is intimately related to emotional and social responsivity. It was also found that the lack of spontaneously synchronized responses is related to decreased energetic arousal (e.g., depression, mood). These findings indicate that the present process analysis approach has many advantages for use in both experimental and applied research, and that it is a useful new paradigm in psychophysiological research. Keywords: Autonomic Nervous System; Emotion; Facial Electromyography; Individual Differences; Spontaneous Responses; Time Series Analysis; Vagal System

Effect of waiting time on health outcomes and service utilization : A prospective randomized study on patients admitted to hospital for hip or knee replacement

Although the principle of equal access to medically justified treatment has been promoted by official health policies in many Western health care systems, practices do not completely meet policy targets. Waiting times for elective surgery vary between patient groups and regions, and growing problems in the availability of services threaten equal access to treatment. Waiting times have come to the attention of decision-makers, and several policy initiatives have been introduced to ensure the availability of care within a reasonable time. In Finland, for example, the treatment guarantee came into force in 2005. However, no consensus exists on optimal waiting time for different patient groups. The purpose of this multi-centre randomized controlled trial was to analyse health-related quality of life, pain and physical function in total hip or knee replacement patients during the waiting time and to evaluate whether the waiting time is associated with patients health outcomes at admission. This study also assessed whether the length of waiting time is associated with social and health services utilization in patients awaiting total hip or knee replacement. In addition, patients health-related quality of life was compared with that of the general population. Consecutive patients with a need for a primary total hip or knee replacement due to osteoarthritis were placed on the waiting list between August 2002 and November 2003. Patients were randomly assigned to a short waiting time (maximum 3 months) or a non-fixed waiting time (waiting time not fixed in advance, instead the patient followed the hospitals routine practice). Patients health-related quality of life was measured upon being placed on the waiting list and again at hospital admission using the generic 15D instrument. Pain and physical function were evaluated using the self-report Harris Hip Score for hip patients and a scale modified from the Knee Society Clinical Rating System for knee patients. Utilization measures were the use of home health care, rehabilitation and social services, physician visits and inpatient care. Health and social services use was low in both waiting time groups. The most common services used while waiting were rehabilitation services and informal care, including unpaid care provided by relatives, neighbours and volunteers. Although patients suffered from clear restrictions in usual activities and physical functioning, they seemed primarily to lean on informal care and personal networks instead of professional care. While longer waiting time did not result in poorer health-related quality of life at admission and use of services during the waiting time was similar to that at the time of placement on the list, there is likely to be higher costs of waiting by people who wait longer simply because they are using services for a longer period. In economic terms, this would represent a negative impact of waiting. Only a few reports have been published of the health-related quality of life of patients awaiting total hip or knee replacement. These findings demonstrate that, in addition to physical dimensions of health, patients suffered from restrictions in psychological well-being such as depression, distress and reduced vitality. This raises the question of how to support patients who suffer from psychological distress during the waiting time and how to develop strategies to improve patients initiatives to reduce symptoms and the burden of waiting. Key words: waiting time, total hip replacement, total knee replacement, health-related quality of life, randomized controlled trial, outcome assessment, social service, utilization of health services

Implications of co-twin dependence for twins' social interactions, mental health and alcohol use : A follow-up study of Finnish twins from adolescence to early adulthood

Objective: The aim of the present study was to examine co-twin dependence and its impact on twins' social contacts, leisure-time activities and psycho-emotional well-being. The role of co-twin dependence was also examined as a moderator of genetic and environmental influences on alcohol use in adolescence and in early adulthood. Methods: The present report is based on the Finnish Twin Cohort Study (FinnTwin16), a population-based study of five consecutive birth cohorts of Finnish twins born in the years 1975-1979. Baseline assessments were collected through mailed questionnaires, within two months of the twins' sixteenth birthday yielding replies from 5563 twin individuals. All respondent twins were sent follow-up questionnaires at ages of 17, 18½, and in early adulthood, when twins were 22-27 years old. Measures: The questionnaires included a survey of health habits and attitudes, a symptom checklist and questions about twins' relationships with parents, peers and co-twin. Measures used were twins' self-reports of their own dependence and their co-twin's dependence at age 16, reports of twins' leisure-time activities and social contacts, alcohol use, psychological distress and somatic symptoms both in adolescence and in early adulthood. Results: In the present study 25.6% of twins reported dependence on their co-twin. There were gender and zygosity differences in dependence, females and MZ twins were more likely to report dependence than males and DZ twins. Co-twin dependence can be viewed on one hand as an individual characteristic, but on the other hand as a pattern of dyadic interaction that is mutually regulated and reciprocal. Most of the twins (80.7%) were either concordantly co-twin dependent or concordantly co-twin independent. The associations of co-twin dependence with twins' social interactions and psycho-emotional characteristics were relatively consistent both in adolescence and in early adulthood. Dependence was related to higher contact frequency and a higher proportion of shared leisure-time activities between twin siblings at the baseline and the follow-up. Additionally co-twin dependence was associated with elevated levels of psycho-emotional distress and somatic complaints, especially in adolescence. In the framework of gene-environment interaction, these results suggest that the genetic contribution to individual differences in drinking patterns is dependent on the nature of the pair-wise relationship of twin siblings. Conclusions: The results of this study indicate that co-twin dependence is a genuine feature of the co-twin relationship and shows the importance of studying the impact of various features of co-twin relationships on individual twins' social and psycho-emotional life and well-being. Our study also offers evidence that differences in inter-personal relationships contribute to the effects of genetic propensities.

Management of multi-scale forest resource data over time

During the last decades there has been a global shift in forest management from a focus solely on timber management to ecosystem management that endorses all aspects of forest functions: ecological, economic and social. This has resulted in a shift in paradigm from sustained yield to sustained diversity of values, goods and benefits obtained at the same time, introducing new temporal and spatial scales into forest resource management. The purpose of the present dissertation was to develop methods that would enable spatial and temporal scales to be introduced into the storage, processing, access and utilization of forest resource data. The methods developed are based on a conceptual view of a forest as a hierarchically nested collection of objects that can have a dynamically changing set of attributes. The temporal aspect of the methods consists of lifetime management for the objects and their attributes and of a temporal succession linking the objects together. Development of the forest resource data processing method concentrated on the extensibility and configurability of the data content and model calculations, allowing for a diverse set of processing operations to be executed using the same framework. The contribution of this dissertation to the utilisation of multi-scale forest resource data lies in the development of a reference data generation method to support forest inventory methods in approaching single-tree resolution.

Design and testing of stand-specific bucking instructions for use on modern cut-to-length harvesters

This study addresses three important issues in tree bucking optimization in the context of cut-to-length harvesting. (1) Would the fit between the log demand and log output distributions be better if the price and/or demand matrices controlling the bucking decisions on modern cut-to-length harvesters were adjusted to the unique conditions of each individual stand? (2) In what ways can we generate stand and product specific price and demand matrices? (3) What alternatives do we have to measure the fit between the log demand and log output distributions, and what would be an ideal goodness-of-fit measure? Three iterative search systems were developed for seeking stand-specific price and demand matrix sets: (1) A fuzzy logic control system for calibrating the price matrix of one log product for one stand at a time (the stand-level one-product approach); (2) a genetic algorithm system for adjusting the price matrices of one log product in parallel for several stands (the forest-level one-product approach); and (3) a genetic algorithm system for dividing the overall demand matrix of each of the several log products into stand-specific sub-demands simultaneously for several stands and products (the forest-level multi-product approach). The stem material used for testing the performance of the stand-specific price and demand matrices against that of the reference matrices was comprised of 9 155 Norway spruce (Picea abies (L.) Karst.) sawlog stems gathered by harvesters from 15 mature spruce-dominated stands in southern Finland. The reference price and demand matrices were either direct copies or slightly modified versions of those used by two Finnish sawmilling companies. Two types of stand-specific bucking matrices were compiled for each log product. One was from the harvester-collected stem profiles and the other was from the pre-harvest inventory data. Four goodness-of-fit measures were analyzed for their appropriateness in determining the similarity between the log demand and log output distributions: (1) the apportionment degree (index), (2) the chi-square statistic, (3) Laspeyres quantity index, and (4) the price-weighted apportionment degree. The study confirmed that any improvement in the fit between the log demand and log output distributions can only be realized at the expense of log volumes produced. Stand-level pre-control of price matrices was found to be advantageous, provided the control is done with perfect stem data. Forest-level pre-control of price matrices resulted in no improvement in the cumulative apportionment degree. Cutting stands under the control of stand-specific demand matrices yielded a better total fit between the demand and output matrices at the forest level than was obtained by cutting each stand with non-stand-specific reference matrices. The theoretical and experimental analyses suggest that none of the three alternative goodness-of-fit measures clearly outperforms the traditional apportionment degree measure. Keywords: harvesting, tree bucking optimization, simulation, fuzzy control, genetic algorithms, goodness-of-fit

Stiffer Optical Tweezers through Real-Time Feedback Control

This thesis integrates real-time feedback control into an optical tweezers instrument. The goal is to reduce the variance in the trapped bead s position, -effectively increasing the trap stiffness of the optical tweezers. Trap steering is done with acousto-optic deflectors and control algorithms are implemented with a field-programmable gate array card. When position clamp feedback control is on, the effective trap stiffness increases 12.1-times compared to the stiffness without control. This allows improved spatial control over trapped particles without increasing the trapping laser power.

Geological factors affecting on after-use of Finnish cut-over peatlands : with implications on the carbon accumulation

In Finland, peat harvesting sites are utilized down almost to the mineral soil. In this situation the properties of mineral subsoil are likely to have considerable influence on the suitability for the various after-use forms. The aims of this study were to recognize the chemical and physical properties of mineral subsoils possibly limiting the after-use of cut-over peatlands, to define a minimum practice for mineral subsoil studies and to describe the role of different geological areas. The future percentages of the different after-use forms were predicted, which made it possible to predict also carbon accumulation in this future situation. Mineral subsoils of 54 different peat production areas were studied. Their general features and grain size distribution was analysed. Other general items studied were pH, electrical conductivity, organic matter, water soluble nutrients (P, NO3-N, NH4-N, S and Fe) and exchangeable nutrients (Ca, Mg and K). In some cases also other elements were analysed. In an additional case study carbon accumulation effectiveness before the intervention was evaluated on three sites in Oulu area (representing sites typically considered for peat production). Areas with relatively sulphur rich mineral subsoil and pool-forming areas with very fine and compact mineral subsoil together covered approximately 1/5 of all areas. These areas were unsuitable for commercial use. They were recommended for example for mire regeneration. Another approximate 1/5 of the areas included very coarse or very fine sediments. Commercial use of these areas would demand special techniques - like using the remaining peat layer for compensating properties missing from the mineral subsoil. One after-use form was seldom suitable for one whole released peat production area. Three typical distribution patterns (models) of different mineral subsoils within individual peatlands were found. 57 % of studied cut-over peatlands were well suited for forestry. In a conservative calculation 26% of the areas were clearly suitable for agriculture, horticulture or energy crop production. If till without large boulders was included, the percentage of areas suitable to field crop production would be 42 %. 9-14 % of all areas were well suitable for mire regeneration or bird sanctuaries, but all areas were considered possible for mire regeneration with correct techniques. Also another 11 % was recommended for mire regeneration to avoid disturbing the mineral subsoil, so total 20-25 % of the areas would be used for rewetting. High sulphur concentrations and acidity were typical to the areas below the highest shoreline of the ancient Litorina sea and Lake Ladoga Bothnian Bay zone. Also differences related to nutrition were detected. In coarse sediments natural nutrient concentration was clearly higher in Lake Ladoga Bothnian Bay zone and in the areas of Svecokarelian schists and gneisses, than in Granitoid area of central Finland and in Archaean gneiss areas. Based on this study the recommended minimum analysis for after-use planning was for pH, sulphur content and fine material (<0.06 mm) percentage. Nutrition capacity could be analysed using the natural concentrations of calcium, magnesium and potassium. Carbon accumulation scenarios were developed based on the land-use predictions. These scenarios were calculated for areas in peat production and the areas released from peat production (59300 ha + 15 671 ha). Carbon accumulation of the scenarios varied between 0.074 and 0.152 million t C a-1. In the three peatlands considered for peat production the long term carbon accumulation rates varied between 13 and 24 g C m-2 a-1. The natural annual carbon accumulation had been decreasing towards the time of possible intervention.