The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

Econometric models of Finnish non-industrial private forest owners' timber supply and timber stock

This dissertation examines the short- and long-run impacts of timber prices and other factors affecting NIPF owners' timber harvesting and timber stocking decisions. The utility-based Faustmann model provides testable hypotheses of the exogenous variables retained in the timber supply analysis. The timber stock function, derived from a two-period biomass harvesting model, is estimated using a two-step GMM estimator based on balanced panel data from 1983 to 1991. Timber supply functions are estimated using a Tobit model adjusted for heteroscedasticity and nonnormality of errors based on panel data from 1994 to 1998. Results show that if specification analysis of the Tobit model is ignored, inconsistency and biasedness can have a marked effect on parameter estimates. The empirical results show that owner's age is the single most important factor determining timber stock; timber price is the single most important factor in harvesting decision. The results of the timber supply estimations can be interpreted using utility-based Faustmann model of a forest owner who values a growing timber in situ.

The role of selected non-timber forest products for rural areas in Laos: Case studies in Ban Napo and Ban Kouay communities

Non-timber forest products (NTFPs) are one of the major income sources for the rural population of Laos. An exploratory study was conducted to determine the role of non-timber forest products for rural communities of the study area. The study was carried out in two villages viz. Ban Napo and Ban Kouay of Sangthong district between January and March 2010. A semi-structured questionnaire was used to gather data from the respondents. Twenty-five respondents from each village were chosen based on their involvement in NTFPs collection and marketing activities. Statistically significant NTFPs income differences were not found between the villages and age groups of the respondents, however, significant differences were found in the annual incomes between farms size of the respondents. This study also analyzed the value chain structure of the three (See khai’ ton, Bamboo mats and Incense sticks) important non-timber forest products and the interactions between the actors in the case study areas. Barriers to entry the market, governance and upgrading possibilities have been discussed for each of the value chains. Comparison of unit prices at different levels of the value chains indicated uneven income distribution in favour of the intermediaries, factories and foreign buyers. The lack of capital, marketing information and negotiation skills restricted the villagers to increase their income. However, all the respondents have shown their satisfaction with their income from NTFPs.

The impact of FSC certification on timber tree regeneration and floristic composition in Honduran community forests

Forest certification has been put forward as a means to improve the sustainability of forest management in the tropical countries, where traditional environmental regulation has been inefficient in controlling forest degradation and deforestation. In these countries, the role of communities as managers of the forest resources is rapidly increasing. However, only a fraction of tropical community forests have been certified and little is known about the impacts of certification in these systems. Two areas in Honduras where community-managed forest operations had received FSC certifications were studied. Río Cangrejal represents an area with a longer history of use, whereas Copén is a more recent forest operation. Ecological sustainability was assessed through comparing timber tree regeneration and floristic composition between certified, conventionally managed and natural forests. Data on woody vegetation and environmental conditions was collected within logging gaps and natural treefall gaps. The regeneration success of shade-tolerant timber tree species was lower in certified than in conventionally managed forests in Río Cangrejal. Furthermore, the floristic composition was more natural-like in the conventionally managed than the certified forests. However, the environmental conditions indicated reduced logging disturbance in the certified forests. Data from Copén demonstrated that the regeneration success of light-demanding timber species was higher in the certified than the unlogged forests. In spite of this, the most valuable timber species Swietenia macrophylla was not regenerating successfully in the certified forests, due to rapid gap closure. The results indicate that pre-certification loggings and forest fragmentation may have a stronger impact on forest regeneration than current, certified management practices. The focus in community forests under low-intensive logging should be directed toward landscape connectivity and the restoration of degraded timber species, instead of reducing mechanical logging damage. Such actions are dependent on better recognition of resource rights, and improving the status of small Southern producers in the markets of certified wood products.

Aspiration-based utility functions in a planning model for timber flow management.

The study presents a theory of utility models based on aspiration levels, as well as the application of this theory to the planning of timber flow economics. The first part of the study comprises a derivation of the utility-theoretic basis for the application of aspiration levels. Two basic models are dealt with: the additive and the multiplicative. Applied here solely for partial utility functions, aspiration and reservation levels are interpreted as defining piecewisely linear functions. The standpoint of the choices of the decision-maker is emphasized by the use of indifference curves. The second part of the study introduces a model for the management of timber flows. The model is based on the assumption that the decision-maker is willing to specify a shape of income flow which is different from that of the capital-theoretic optimum. The utility model comprises four aspiration-based compound utility functions. The theory and the flow model are tested numerically by computations covering three forest holdings. The results show that the additive model is sensitive even to slight changes in relative importances and aspiration levels. This applies particularly to nearly linear production possibility boundaries of monetary variables. The multiplicative model, on the other hand, is stable because it generates strictly convex indifference curves. Due to a higher marginal rate of substitution, the multiplicative model implies a stronger dependence on forest management than the additive function. For income trajectory optimization, a method utilizing an income trajectory index is more efficient than one based on the use of aspiration levels per management period. Smooth trajectories can be attained by squaring the deviations of the feasible trajectories from the desired one.

Non-industrial private forest landowners’ choices of timber management strategies and potential allowable cut.

In the study, the potential allowable cut in the district of Pohjois-Savo - based on the non-industrial private forest landowners' (NIPF) choices of timber management strategies - was clarified. Alternative timber management strategies were generated, and the choices and factors affecting the choices of timber management strategies by NIPF landowners were studied. The choices of timber management strategies were solved by maximizing the utility functions of the NIPF landowners. The parameters of the utility functions were estimated using the Analytic Hierarchy Process (AHP). The level of the potential allowable cut was compared to the cutting budgets based on the 7th and 8th National Forest Inventories (NFI7 and NFI8), to the combining of private forestry plans, and to the realized drain from non-industrial private forests. The potential allowable cut was calculated using the same MELA system as has been used in the calculation of the national cutting budget. The data consisted of the NIPF holdings (from the TASO planning system) that had been inventoried compartmentwise and had forestry plans made during the years 1984-1992. The NIPF landowners' choices of timber management strategies were clarified by a two-phase mail inquiry. The most preferred strategy obtained was "sustainability" (chosen by 62 % of landowners). The second in order of preference was "finance" (17 %) and the third was "saving" (11 %). "No cuttings", and "maximum cuttings" were the least preferred (9 % and 1 %, resp.). The factors promoting the choices of strategies with intensive cuttings were a) "farmer as forest owner" and "owning fields", b) "increase in the size of the forest holding", c) agriculture and forestry orientation in production, d) "decreasing short term stumpage earning expectations", e) "increasing intensity of future cuttings", and f) "choice of forest taxation system based on site productivity". The potential allowable cut defined in the study was 20 % higher than the average of the realized drain during the years 1988-1993, which in turn, was at the same level as the cutting budget based on the combining of forestry plans in eastern Finland. Respectively, the potential allowable cut defined in the study was 12 % lower than the NFI8-based greatest sustained allowable cut for the 1990s. Using the method presented in this study, timber management strategies can be clarified for non-industrial private forest landowners in different parts of Finland. Based on the choices of timber managemet strategies, regular cutting budgets can be calculated more realistically than before.

Non-industrial private forest landowners’ choices of timber management strategies.

The factors affecting the non-industrial, private forest landowners' (hereafter referred to using the acronym NIPF) strategic decisions in management planning are studied. A genetic algorithm is used to induce a set of rules predicting potential cut of the landowners' choices of preferred timber management strategies. The rules are based on variables describing the characteristics of the landowners and their forest holdings. The predictive ability of a genetic algorithm is compared to linear regression analysis using identical data sets. The data are cross-validated seven times applying both genetic algorithm and regression analyses in order to examine the data-sensitivity and robustness of the generated models. The optimal rule set derived from genetic algorithm analyses included the following variables: mean initial volume, landowner's positive price expectations for the next eight years, landowner being classified as farmer, and preference for the recreational use of forest property. When tested with previously unseen test data, the optimal rule set resulted in a relative root mean square error of 0.40. In the regression analyses, the optimal regression equation consisted of the following variables: mean initial volume, proportion of forestry income, intention to cut extensively in future, and positive price expectations for the next two years. The R2 of the optimal regression equation was 0.34 and the relative root mean square error obtained from the test data was 0.38. In both models, mean initial volume and positive stumpage price expectations were entered as significant predictors of potential cut of preferred timber management strategy. When tested with the complete data set of 201 observations, both the optimal rule set and the optimal regression model achieved the same level of accuracy.

Policy evaluations for U.S. federal timber sale accounting system development.

XVIII IUFRO World Congress, Ljubljana 1986.

Effects of permanent and non-permanent forest policy means on timber supply.

XVIII IUFRO World Congress, Ljubljana 1986.

Metsäpirulainen : Liikemies Erik Johan Längman (1799-1863) talousjärjestelmän murroksessa

The Forest devil. Businessman Erik Johan Längman (1799 1863) in the transition of economic system In Finnish historiography, Erik Johan Längman (1799-1863) bears a bad reputation of his own level: a mean, profit-seeking businessman who did not care too much about methods in his operations. Although little known, Längman has been praised as one of the pioneers of modern industry in the Grand Duchy of Finland, which belonged to the Russian Empire. From the mid 1830s Längman owned iron mill and several sawmills around the country. The growing demand of the markets in the 1830s, especially in Great Britain, marked a strong stimulus to Finnish lumber industry. At the same time claims for stricter rule over the sawmill industry were raised by high officials. The momentum of the conflict, the Forest Act of 1851, brought an end to illegal overproduction. In this biography, particular emphasis is laid on the entrepreneurial behaviour of Längman, but also on the effect the entrepreneurs had on the Crown s policies. On the other hand, how did the limitations imposed by the Crown guide the actions of the sawmill owners? The solutions adopted by the sawmill owners and the manoeuvring of the government are in a constant dialogue in this study. The Finnish sawmill industry experienced a major change in its techniques and methods of acquiring timber during the 1830s. Längman particularly, with his acquisition organisation, was able to find and reach faraway forests with unexpected results. The official regulating system with its strict producing quotas couldn t follow the changes. When the battle against the sawmill industry really started on, in 1840, it didn t happen for the benefit of iron industry, as argued previously, but to save Crown forests from depletion. After the mid 1840s Längman and the leader of the Finnish nationalistic movement, J. V. Snellman questioned the rationality of the entire regulation system and in doing so they also posed a threat against the aristocratic power. The influential but now also badly provoked chairman of the economic division of senate, Lars Gabriel von Haartman, accused the sawmill-owners harder than ever and took the advantage of the reactionary spirit of imperial Russia to launch the state forest administration. Längman circumvented the conditions of privileges, felled Crown forests illegally and accusations were brought against him for destroying his competitors. The repeated conflicts spoke primarily about a superior business idea and organisational ability. Although Längman spent his last years mostly abroad he still had interests in Finnish timber business when the liberation of sawmill-industry was established, in 1861. Surprisingly, the antagonism around the Crown forests continued, probably even more heated.

Nuori konservatiivi : Tuure Junnila ja hänen poliittinen toimintansa vuoteen 1956

Tuure Junnila, PhD (1910-1999) was one of Finland's most renowned conservative politicians of the post-war period. Junnila is remembered primarily as a persistent opponent of Urho Kekkonen, a long-term Member of Parliament, a conspicuous opposition member and a prolific political writer. Junnila's ideologies and political views were conservative, and he is one of the most outstanding figures in the history of the National Coalition Party. Junnila also made an extensive career outside of politics, first as an economist and then as an executive of Finland's leading commercial bank Kansallis-Osake-Pankki. The Young Conservative is a partial biography written using traditional historical research methods, which examines Junnila's personal history and his activity in public life up to 1956. The study begins by investigating Junnila's background through his childhood, school years, university studies and early professional career. It also looks at Junnila's work as an economist and practical banker. Particular attention is paid to Junnila's political work, constantly focusing on the following five often overlapping areas: (1) economic policy, (2) domestic policy, (3) foreign and security policy, (4) Junnila and Urho Kekkonen, (5) Junnila, the Coalition Party and Finnish conservatism. In his economic policy, Junnila emphasised the importance of economic stability, opposed socialisation and the growth of public expenditure, defended the free market system and private entrepreneurship, and demanded tax cuts. This policy was very popular within the Coalition Party during the early 1950s, making Junnila the leading conservative economic politician of the time. In terms of domestic policy, Junnila demanded as early as the 1940s that a "third force" should be established in Finland to counterbalance the agrarian and labour parties by uniting conservative and liberal ideologies under the same roof. Foreign and security policy is the area of Junnila's political activity which is most clearly situated after the mid-1950s. However, Junnila's early speeches and writings already show a striving towards the unconditional neutrality modelled by Switzerland and Sweden and a strong emphasis on Finland's right to internal self-determination. Junnila, as did the Coalition Party as a whole, adopted a consistently critical approach towards Urho Kekkonen between 1951 and 1956, but this attitude was not as bluntly negative and all-round antagonistic as many previous studies have implied. Junnila was one of the leading Finnish conservatives of the early 1950s and in all essence his views were analogous to the general alignment of the Coalition Party at the time: conservative in ideology and general policy, and liberal in economic policy.

Nuorten männiköiden kehitys - taimikonhoito ja ensiharvennus

The aim of this study was to investigate the effects of location, site type, regeneration method and precommercial thinning on the characteristics and development of young, even-aged, pure Scots pine stands. In addition, the effects of timing and intensity of first commercial thinning on the yield and profitability during the rotation period were also studied. The stand characteristics and external quality of young Scots pine stands and stand-level growth models were based on extensive inventory data of the Finnish Forest Research Institute for young Scots pine stands (3 measurement times, 192 stands). The effect of precommercial thinning on stand development was examined on the basis of long-term experiments (13 stands, 169 plots). The effect of timing and intensity of the first commercial thinning on yield and profitability were based on measurements made in first commercial thinnings (27 stands of Metsähallitus), and the further stand development was modeled using the MOTTI simulator. The thesis was based on four articles and a summary. Stand level growth models were developed for young, even-aged Scots pine stands. The models reliably predicted the development up until the first commercial thinning stage. The stand density of young Scots pine stands in Finland was moderately low compared to the target values. In addition, the external quality of pines was low on average. The low stand density and poor external quality will result in the need for quality tree selection in thinnings, if high quality sawn timber is required. In Northern Finland, only 20% of the dominant trees were classified as normal. This will lead to the situation where external quality will remain relatively poor up until the end of rotation. Early and light precommercial thinning (Hdom 3 m, to a density of 3000 trees per hectare) increased the thinning removal by 40% compared to late and more intensive precommercial thinning (at 7 meters to a density of 2000 trees per hectare). A model for the effect of precommercial thinning on merchantable thinning removal at the first commercial thinning was developed for forest management planning purposes. When the recommended time of first commercial thinning was delayed from a dominant height of 12 m to 16 m, or by ten years, the yield of merchantable wood was doubled. Simultaneously, the current value of the stumpage revenues (with 4% interest rate) was increased on the average by 65% (330 € per hectare). Variation in stumpage prices or interest rates did not have any effect on the final results. Without exception, delaying the first commercial thinning by ten years seemed to be the most profitable method. This presupposes that precommercial thinning has been carried out at the right time and that tree quality aspects do not be specially considered. Furthermore, the wood yield and economic outcome from the entire rotation were similar regardless of whether the first thinning was performed at the time currently recommended or ten years later.

Management of multi-scale forest resource data over time

During the last decades there has been a global shift in forest management from a focus solely on timber management to ecosystem management that endorses all aspects of forest functions: ecological, economic and social. This has resulted in a shift in paradigm from sustained yield to sustained diversity of values, goods and benefits obtained at the same time, introducing new temporal and spatial scales into forest resource management. The purpose of the present dissertation was to develop methods that would enable spatial and temporal scales to be introduced into the storage, processing, access and utilization of forest resource data. The methods developed are based on a conceptual view of a forest as a hierarchically nested collection of objects that can have a dynamically changing set of attributes. The temporal aspect of the methods consists of lifetime management for the objects and their attributes and of a temporal succession linking the objects together. Development of the forest resource data processing method concentrated on the extensibility and configurability of the data content and model calculations, allowing for a diverse set of processing operations to be executed using the same framework. The contribution of this dissertation to the utilisation of multi-scale forest resource data lies in the development of a reference data generation method to support forest inventory methods in approaching single-tree resolution.