Studies on metal complex formation of environmentally friendly aminopolycarboxylate chelating agents

Aminopolykarboksyylaatteja, kuten etyleenidiamiinitetraetikkahappoa (EDTA), on käytetty useiden vuosikymmenien ajan erinomaisen metalli-ionien sitomiskyvyn vuoksi kelatointiaineena lukuisissa sovelluksissa sekä analytiikassa että monilla teollisisuuden aloilla. Näiden yhdisteiden biohajoamattomuus on kuitenkin herättänyt huolta viime aikoina, sillä niiden on havaittu olevan hyvin pysyviä luonnossa. Tämä työ on osa laajempaa tutkimushanketta, jossa on tavoitteena löytää korvaavia kelatointiaineita EDTA:lle. Tutkimuksen aiheena on kuuden kelatointiaineen metalli-ionien sitomiskyvyn kartoitus. EDTA:a paremmin luonnossa hajoavina nämä ovat ympäristöystävällisiä ehdokkaita korvaaviksi kelatointiaineiksi useisiin sovelluksiin. Työssä tutkittiin niiden kompleksinmuodostusta useiden metalli-ionien kanssa potentiometrisella titrauksella. Metalli-ionivalikoima vaihteli hieman kelatointiaineesta riippuen sisältäen magnesium-, kalsium-, mangaani-, rauta-, kupari-, sinkki-, kadmium-, elohopea-, lyijy- ja lantaani-ionit. Tutkittavat metallit oli valittu tähtäimessä olevien sovellusten, synteesissä ilmenneiden ongelmien tai ympäristönäkökohtien perusteella. Tulokset osoittavat näiden yhdisteiden metallinsitomiskyvyn olevan jonkin verran heikompi kuin EDTA:lla, mutta kuitenkin riittävän useisiin sovelluksiin kuten sellunvalkaisuprosessiin. Myrkyllisten raskasmetallien, kadmiumin, elohopen ja lyijyn kohdalla EDTA:a heikompi sitoutuminen on eduksikin, koska se yhdistettynä parempaan biohajoavuuteen saattaa alentaa tutkittujen yhdisteiden kykyä mobilisoida kyseisiä metalleja sedimenteistä. Useimmilla tutkituista yhdisteistä on ympäristönäkökulmasta etuna myös EDTA:a pienempi typpipitoisuus.

Theory and Analysis of Classic Heavy Metal Harmony

This thesis explores melodic and harmonic features of heavy metal, and while doing so, explores various methods of music analysis; their applicability and limitations regarding the study of heavy metal music. The study is built on three general hypotheses according to which 1) acoustic characteristics play a significant role for chord constructing in heavy metal, 2) heavy metal has strong ties and similarities with other Western musical styles, and 3) theories and analytical methods of Western art music may be applied to heavy metal. It seems evident that in heavy metal some chord structures appear far more frequently than others. It is suggested here that the fundamental reason for this is the use of guitar distortion effect. Subsequently, theories as to how and under what principles heavy metal is constructed need to be put under discussion; analytical models regarding the classification of consonance and dissonance and chord categorization are here revised to meet the common practices of this music. It is evident that heavy metal is not an isolated style of music; it is seen here as a cultural fusion of various musical styles. Moreover, it is suggested that the theoretical background to the construction of Western music and its analysis can offer invaluable insights to heavy metal. However, the analytical methods need to be reformed to some extent to meet the characteristics of the music. This reformation includes an accommodation of linear and functional theories that has been found rather rarely in music theory and musicology.

Evaluation of driving ability of the disabled persons in the context of the psychological activity theory

In the future the number of the disabled drivers requiring a special evaluation of their driving ability will increase due to the ageing population, as well as the progress of adaptive technology. This places pressure on the development of the driving evaluation system. Despite quite intensive research there is still no consensus concerning what is the factual situation in a driver evaluation (methodology), which measures should be included in an evaluation (methods), and how an evaluation has to be carried out (practise). In order to find answers to these questions we carried out empirical studies, and simultaneously elaborated upon a conceptual model for driving and a driving evaluation. The findings of empirical studies can be condensed into the following points: 1) A driving ability defined by the on-road driving test is associated with different laboratory measures depending on the study groups. Faults in the laboratory tests predicted faults in the on-road driving test in the novice group, whereas slowness in the laboratory predicted driving faults in the experienced drivers group. 2) The Parkinson study clearly showed that even an experienced clinician cannot reliably accomplish an evaluation of a disabled person’s driving ability without collaboration with other specialists. 3) The main finding of the stroke study was that the use of a multidisciplinary team as a source of information harmonises the specialists’ evaluations. 4) The patient studies demonstrated that the disabled persons themselves, as well as their spouses, are as a rule not reliable evaluators. 5) From the safety point of view, perceptible operations with the control devices are not crucial, but correct mental actions which the driver carries out with the help of the control devices are of greatest importance. 6) Personality factors including higher-order needs and motives, attitudes and a degree of self-awareness, particularly a sense of illness, are decisive when evaluating a disabled person’s driving ability. Personality is also the main source of resources concerning compensations for lower-order physical deficiencies and restrictions. From work with the conceptual model we drew the following methodological conclusions: First, the driver has to be considered as a holistic subject of the activity, as a multilevel hierarchically organised system of an organism, a temperament, an individuality, and a personality where the personality is the leading subsystem from the standpoint of safety. Second, driving as a human form of a sociopractical activity, is also a hierarchically organised dynamic system. Third, in an evaluation of driving ability it is a question of matching these two hierarchically organised structures: a subject of an activity and a proper activity. Fourth, an evaluation has to be person centred but not disease-, function- or method centred. On the basis of our study a multidisciplinary team (practitioner, driving school teacher, psychologist, occupational therapist) is recommended for use in demanding driver evaluations. Primary in a driver’s evaluations is a coherent conceptual model while concrete methods of evaluations may vary. However, the on-road test must always be performed if possible.

Cancer survivors at work : Work-related problems and factors associated with their employment, work ability and social support from the work community

Due to the improved prognosis of many forms of cancer, an increasing number of cancer survivors are willing to return to work after their treatment. It is generally believed, however, that people with cancer are either unemployed, stay at home, or retire more often than people without cancer. This study investigated the problems that cancer survivors experience on the labour market, as well as the disease-related, sociodemographic and psychosocial factors at work that are associated with the employment and work ability of cancer survivors. The impact of cancer on employment was studied combining the data of Finnish Cancer Registry and census data of the years 1985, 1990, 1995 or 1997 of Statistics Finland. There were two data sets containing 46 312 and 12 542 people with cancer. The results showed that cancer survivors were slightly less often employed than their referents. Two to three years after the diagnosis the employment rate of the cancer survivors was 9% lower than that of their referents (64% vs. 73%), whereas the employment rate was the same before the diagnosis (78%). The employment rate varied greatly according to the cancer type and education. The probability of being employed was greater in the lower than in the higher educational groups. People with cancer were less often employed than people without cancer mainly because of their higher retirement rate (34% vs. 27%). As well as employment, retirement varied by cancer type. The risk of retirement was twofold for people having cancer of the nervous system or people with leukaemia compared to their referents, whereas people with skin cancer, for example, did not have an increased risk of retirement. The aim of the questionnaire study was to investigate whether the work ability of cancer survivors differs from that of people without cancer and whether cancer had impaired their work ability. There were 591 cancer survivors and 757 referents in the data. Even though current work ability of cancer survivors did not differ between the survivors and their referents, 26% of cancer survivors reported that their physical work ability, and 19% that their mental work ability had deteriorated due to cancer. The survivors who had other diseases or had had chemotherapy, most often reported impaired work ability, whereas survivors with a strong commitment to their work organization, or a good social climate at work, reported impairment less frequently. The aim of the other questionnaire study containing 640 people with the history of cancer was to examine extent of social support that cancer survivors needed, and had received from their work community. The cancer survivors had received most support from their co-workers, and they hoped for more support especially from the occupational health care personnel (39% of women and 29% of men). More support was especially needed by men who had lymphoma, had received chemotherapy or had a low education level. The results of this study show that the majority of the survivors are able to return to work. There is, however, a group of cancer survivors who leave work life early, have impaired work ability due to their illness, and suffer from lack of support from their work place and the occupational health services. Treatment-related, as well as sociodemographic factors play an important role in survivors' work-related problems, and presumably their possibilities to continue working.

Options for selecting dairy cattle for milk coagulation ability

Lypsylehmien maidon juoksettumiskyvyn jalostuskeinot Väitöskirjassa tutkittiin lypsylehmien maidon juustonvalmistuslaadun parantamista jalostusvalinnan avulla. Tutkimusaihe on tärkeä, sillä yhä suurempi osa maidosta käytetään juustonvalmistukseen. Tutkimuksen kohteena oli maidon juoksettumiskyky, sillä se on yksi keskeisistä juustomäärään vaikuttavista tekijöistä. Maidon juoksettumiskyky vaihteli huomattavasti lehmien, sonnien, karjojen, rotujen ja lypsykauden vaiheiden välillä. Vaikka tankkimaidon juoksettumiskyvyssä olikin suuria eroja karjoittain, karja selitti vain pienen osan juoksettumiskyvyn kokonaisvaihtelusta. Todennäköisesti perinnölliset erot lehmien välillä selittävät suurimman osan karjojen tankkimaitojen juoksettumiskyvyssä havaituista eroista. Hyvä hoito ja ruokinta vähensivät kuitenkin jossain määrin huonosti juoksettuvien tankkimaitojen osuutta karjoissa. Holstein-friisiläiset lehmät olivat juoksettumiskyvyltään ayrshire-rotuisia lehmiä parempia. Huono juoksettuminen ja juoksettumattomuus oli vain vähäinen ongelma holstein-friisiläisillä (10 %), kun taas kolmannes ayrshire-lehmistä tuotti huonosti juoksettuvaa tai juoksettumatonta maitoa. Maitoa sanotaan huonosti juoksettuvaksi silloin, kun juustomassa ei ole riittävän kiinteää leikattavaksi puolen tunnin kuluttua juoksetteen lisäyksestä. Juoksettumattomaksi määriteltävä maito ei saostu lainkaan puolen tunnin aikana ja on siksi erittäin huonoa raaka-ainetta juustomeijereille. Noin 40 % lehmien välisistä eroista maidon juoksettumiskyvyssä selittyi perinnöllisillä tekijöillä. Juoksettumiskykyä voikin sanoa hyvin periytyväksi ominaisuudeksi. Kolme mittauskertaa lehmää kohti riittää varsin hyvin lehmän maidon keskimääräisen juoksettumiskyvyn arvioimiseen. Tällä hetkellä juoksettumiskyvyn suoran jalostamisen ongelmana on kuitenkin automatisoidun, laajamittaiseen käyttöön soveltuvan mittalaitteen puute. Tämän takia väitöskirjassa tutkittiin mahdollisuuksia jalostaa maidon juoksettumiskykyä epäsuorasti, jonkin toisen ominaisuuden kautta. Tällaisen ominaisuuden pitää olla kyllin voimakkaasti perinnöllisesti kytkeytynyt juoksettumiskykyyn, jotta jalostus olisi mahdollista sen avulla. Tutkittavat ominaisuudet olivat sonnien kokonaisjalostusarvossa jo mukana olevat maitotuotos ja utareterveyteen liittyvät ominaisuudet sekä kokonaisjalostusarvoon kuulumattomat maidon valkuais- ja kaseiinipitoisuus sekä maidon pH. Väitöskirjassa tutkittiin myös mahdollisuuksia ns. merkkiavusteiseen valintaan tutkimalla maidon juoksettumattomuuden perinnöllisyyttä ja kartoittamalla siihen liittyvät kromosomialueet. Tutkimuksen tulosten perusteella lehmien utareterveyden jalostaminen parantaa jonkin verran myös maidon juoksettumiskykyä sekä vähentää juoksettumattomuutta ayrshire-rotuisilla lehmillä. Lehmien maitotuotos ja maidon juoksettumiskyky sekä juoksettumattomuus ovat sen sijaan perinnöllisesti toisistaan riippumattomia ominaisuuksia. Myöskin maidon valkuais- ja kaseiinipitoisuuden perinnöllinen yhteys juoksettumiskykyyn oli likimain nolla. Maidon pH:n ja juoksettumiskyvyn välillä oli melko voimakas perinnöllinen yhteys, joten maidon pH:n jalostaminen parantaisi myös maidon juoksettumiskykyä. Todennäköisesti sen jalostaminen ei kuitenkaan vähentäisi juoksettumatonta maitoa tuottavien lehmien määrää. Koska maidon juoksettumattomuus on niin yleinen ongelma suomalaisilla ayrshire-lehmillä, väitöksessä selvitettiin tarkemmin ilmiön taustoja. Kaikissa kolmessa tutkimusaineistoissa noin 10 % ayrshire-lehmistä tuotti juoksettumatonta maitoa. Kahden vuoden kuukausittaisen seurannan aikana osa lehmistä tuotti juoksettumatonta maitoa lähes joka mittauskerralla. Maidon juoksettumattomuus oli yhteydessä lypsykauden vaiheeseen, mutta mikään ympäristötekijöistä ei pystynyt täysin selittämään sitä. Sen sijaan viitteet sen periytyvyydestä vahvistuivat tutkimusten edetessä. Lopuksi tutkimusryhmä onnistui kartoittamaan juoksettumattomuutta aiheuttavat kromosomialueet kromosomeihin 2 ja 18, lähelle DNA-merkkejä BMS1126 ja BMS1355. Tulosten perusteella maidon juoksettumattomuus ei ole yhteydessä maidon juoksettumistapahtumassa keskeisiin kaseiinigeeneihin. Sen sijaan on mahdollista, että juoksettumattomuusongelman aiheuttavat kaseiinigeenien syntetisoinnin jälkeisessä muokkauksessa tapahtuvat virheet. Asia vaatii kuitenkin perusteellista tutkimista. Väitöksen tulosten perusteella maidon juoksettumattomuusgeeniä kantavien eläinten karsiminen jalostuseläinten joukosta olisi tehokkain tapa jalostaa maidon juoksettumiskykyä suomalaisessa lypsykarjapopulaatiossa.

Radical Enhanced Atomic Layer Deposition of Metals and Oxides

Atomic Layer Deposition (ALD) is a chemical, gas-phase thin film deposition method. It is known for its ability for accurate and precise thickness control, and uniform and conformal film growth. One area where ALD has not yet excelled is film deposition at low temperatures. Also deposition of metals, besides the noble metals, has proven to be quite challenging. To alleviate these limitations, more aggressive reactants are required. One such group of reactants are radicals, which may be formed by dissociating gases. Dissociation is most conveniently done with a plasma source. For example, dissociating molecular oxygen or hydrogen, oxygen or hydrogen radicals are generated. The use of radicals in ALD may surmount some of the above limitations: oxide film deposition at low temperatures may become feasible if oxygen radicals are used as they are highly reactive. Also, as hydrogen radicals are very effective reducing agents, they may be used to deposit metals. In this work, a plasma source was incorporated in an existing ALD reactor for radical generation, and the reactor was used to study five different Radical Enhanced ALD processes. The modifications to the existing reactor and the different possibilities during the modification process are discussed. The studied materials include two metals, copper and silver, and three oxides, aluminium oxide, titanium dioxide and tantalum oxide. The materials were characterized and their properties were compared to other variations of the same process, utilizing the same metal precursor, to understand what kind of effect the non-metal precursor has on the film properties and growth characteristics. Both metals were deposited successfully, and silver for the first time by ALD. The films had low resistivity and grew conformally in the ALD mode, demonstrating that the REALD of metals is true ALD. The oxide films had exceptionally high growth rates, and aluminium oxide grew at room temperature with low cycle times and resulted in good quality films. Both aluminium oxide and titanium dioxide were deposited on natural fibres without damaging the fibre. Tantalum oxide was also deposited successfully, with good electrical properties, but at slightly higher temperature than the other two oxides, due to the evaporation temperature required by the metal precursor. Overall, the ability of REALD to deposit metallic and oxide films with high quality at low temperatures was demonstrated.

Polymerization of Ethene and Branched α-olefins with Group IV Metal Complexes Bearing Nitrogen- and Oxygen-Based Ligands

The commodity plastics that are used in our everyday lives are based on polyolefin resins and they find wide variety of applications in several areas. Most of the production is carried out in catalyzed low pressure processes. As a consequence polymerization of ethene and α-olefins has been one of the focus areas for catalyst research both in industry and academia. Enormous amount of effort have been dedicated to fine tune the processes and to obtain better control of the polymerization and to produce tailored polymer structures The literature review of the thesis concentrates on the use of Group IV metal complexes as catalysts for polymerization of ethene and branched α-olefins. More precisely the review is focused on the use of complexes bearing [O,O] and [O,N] type ligands which have gained considerable interest. Effects of the ligand framework as well as mechanical and fluxional behaviour of the complexes are discussed. The experimental part consists mainly of development of new Group IV metal complexes bearing [O,O] and [O,N] ligands and their use as catalysts precursors in ethene polymerization. Part of the experimental work deals with usage of high-throughput techniques in tailoring properties of new polymer materials which are synthesized using Group IV complexes as catalysts. It is known that the by changing the steric and electronic properties of the ligand framework it is possible to fine tune the catalyst and to gain control over the polymerization reaction. This is why in this thesis the complex structures were designed so that the ligand frameworks could be fairly easily modified. All together 14 complexes were synthesised and used as catalysts in ethene polymerizations. It was found that the ligand framework did have an impact within the studied catalyst families. The activities of the catalysts were affected by the changes in complex structure and also effects on the produced polymers were observed: molecular weights and molecular weight distributions were depended on the used catalyst structure. Some catalysts also produced bi- or multi-modal polymers. During last decade high-throughput techniques developed in pharmaceutical industries have been adopted into polyolefin research in order to speed-up and optimize the catalyst candidates. These methods can now be regarded as established method suitable for both academia and industry alike. These high-throughput techniques were used in tailoring poly(4-methyl-1-pentene) polymers which were synthesized using Group IV metal complexes as catalysts. This work done in this thesis represents the first successful example where the high-throughput synthesis techniques are combined with high-throughput mechanical testing techniques to speed-up the discovery process for new polymer materials.

Late Transition Metal and Aluminum Complexes for the Polymerization of Ethene and Acrylates

Polyethene, polyacrylates and polymethyl acrylates are versatile materials that find wide variety of applications in several areas. Therefore, polymerization of ethene, acrylates and methacrylates has achieved a lot attention during past years. Numbers of metal catalysts have been introduced in order to control the polymerization and to produce tailored polymer structures. Herein an overview on the possible polymerization pathways for ethene, acrylates and methacrylates is presented. In this thesis iron(II) and cobalt(II) complexes bearing tri- and tetradentate nitrogen ligands were synthesized and studied in the polymerization of tertbutyl acrylate (tBA) and methyl methacrylate (MMA). Complexes are activated with methylaluminoxane (MAO) before they form active combinations for polymerization reactions. The effect of reaction conditions, i.e. monomer concentration, reaction time, temperature, MAO to metal ratio, on activity and polymer properties were investigated. The described polymerization system enables mild reaction conditions, the possibility to tailor molar mass of the produced polymers and provides good control over the polymerization. Moreover, the polymerization of MMA in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization (ATRP) was studied. Several manganese(II) complexes were studied in the ethene polymerization with combinatorial methods and new active catalysts were found. These complexes were also studied in acrylate and methacrylate polymerizations after MAO activation and converted into the corresponding alkyl (methyl or benzyl) derivatives. Combinatorial methods were introduced to discover aluminum alkyl complexes for the polymerization of acrylates and methacrylates. Various combinations of aluminum alkyls and ligands, including phosphines, salicylaldimines and nitrogen donor ligands, were prepared in situ and utilized to initiate the polymerization of tBA. Phosphine ligands were found to be the most active and the polymerization MMA was studied with these active combinations. In addition, a plausible polymerization mechanism for MMA based on ESI-MS, 1H and 13C NMR is proposed.

A quantum chemical investigation of the metal centres in cytochrome c oxidase

Quantum effects are often of key importance for the function of biological systems at molecular level. Cellular respiration, where energy is extracted from the reduction of molecular oxygen to water, is no exception. In this work, the end station of the electron transport chain in mitochondria, cytochrome c oxidase, is investigated using quantum chemical methodology. Cytochrome c oxidase contains two haems, haem a and haem a3. Haem a3, with its copper companion, CuB, is involved in the final reduction of oxygen into water. This binuclear centre receives the necessary electrons from haem a. Haem a, in turn, receives its electrons from a copper ion pair in the vicinity, called CuA. Density functional theory (DFT) has been used to clarify the charge and spin distributions of haem a, as well as changes in these during redox activity. Upon reduction, the added electron is shown to be evenly distributed over the entire haem structure, important for the accommodation of the prosthetic group within the protein. At the same time, the spin distribution of the open-shell oxidised state is more localised to the central iron. The exact spin density distribution has been disputed in the literature, however, different experiments indicating different distributions of the unpaired electron. The apparent contradiction is shown to be due to the false assumption of a unit amount of unpaired electron density; in fact, the oxidised state has about 1.3 unpaired electrons. The validity of the DFT results have been corroborated by wave function based coupled cluster calculations. Point charges, for use in classical force field based simulations, have been parameterised for the four metal centres, using a newly developed methodology. In the procedure, the subsystem for which point charges are to be obtained, is surrounded by an outer region, with the purpose of stabilising the inner region, both electronically and structurally. Finally, the possibility of vibrational promotion of the electron transfer step between haem a and a3 has been investigated. Calculating the full vibrational spectra, at DFT level, of a combined model of the two haems, revealed several normal modes that do shift electron density between the haems. The magnitude of the shift was found to be moderate, at most. The proposed mechanism could have an assisting role in the electron transfer, which still seems to be dominated by electron tunnelling.

Atomic Layer Deposition for optical applications: metal fluoride thin films and novel devices

Thin films of various metal fluorides are suited for optical coatings from infrared (IR) to ultraviolet (UV) range due to their excellent light transmission. In this work, novel metal fluoride processes have been developed for atomic layer deposition (ALD), which is a gas phase thin film deposition method based on alternate saturative surface reactions. Surface controlled self-limiting film growth results in conformal and uniform films. Other strengths of ALD are precise film thickness control, repeatability and dense and pinhole free films. All these make the ALD technique an ideal choice also for depositing metal fluoride thin films. Metal fluoride ALD processes have been largely missing, which is mostly due to a lack of a good fluorine precursor. In this thesis, TiF4 precursor was used for the first time as the fluorine source in ALD for depositing CaF2, MgF2, LaF3 and YF3 thin films. TaF5 was studied as an alternative novel fluorine precursor only for MgF2 thin films. Metal-thd (thd = 2,2,6,6-tetramethyl-3,5-heptanedionato) compounds were applied as the metal precursors. The films were grown at 175 450 °C and they were characterized by various methods. The metal fluoride films grown at higher temperatures had generally lower impurity contents with higher UV light transmittances, but increased roughness caused more scattering losses. The highest transmittances and low refractive indices below 1.4 (at 580 nm) were obtained with MgF2 samples. MgF2 grown from TaF5 precursor showed even better UV light transmittance than MgF2 grown from TiF4. Thus, TaF5 can be considered as a high quality fluorine precursor for depositing metal fluoride thin films. Finally, MgF2 films were applied in fabrication of high reflecting mirrors together with Ta2O5 films for visible region and with LaF3 films for UV region. Another part of the thesis consists of applying already existing ALD processes for novel optical devices. In addition to the high reflecting mirrors, a thin ALD Al2O3 film on top of a silver coating was proven to protect the silver mirror coating from tarnishing. Iridium grid filter prototype for rejecting IR light and Ir-coated micro channel plates for focusing x-rays were successfully fabricated. Finally, Ir-coated Fresnel zone plates were shown to provide the best spatial resolution up to date in scanning x-ray microscopy.