Rikollisia sattumalta? : Naisten keskinäistä haureutta koskevat oikeudenkäynnit 1950-luvun Itä-Suomessa

The main focus of the research is on the genealogy of women's same-sex fornication in Finnish criminal law from 1889/1894 to 1971. Why were women included in the concept of same-sex fornication in Finland and why, where, and when was the law put into effect? Which women were tried, how did the trial proceedings evolve, and what kind of effects did the trials have afterwards? Which concepts were used? These questions have been approached through the analysis of the Finnish Penal Code, the criminal law science and four trial proceedings in Eastern Finland during the 1950s. The research draws on the epistemology of the closet and the concept of heteronormativity adapted from queer theories. It is method critical in utilising ethnography, micro history and feminist ethical self-reflection. The research consists of six scientific refereed articles (see appendix) and of a theoretical introduction. The main results of the research are: 1) The genealogy of Finnish decency [Sittlichkeit] can not be researched without oral histories, due to the late modernisation of Finnish society and the legal system, which does not follow the pattern of English, French and German societies. 2) The inclusion of women's same-sex fornication in the Finnish Penal Code is not incomprehensible when compared to the early modern European legislations and court practices. Women have been punished for the sins of Sodom, though not directly under the 1734 Swedish law. 3) Fornication and decency were ambivalent concepts in the 1889/1894 law, and juridical authorities offered controversial interpretations of them during the late 19th and early 20th centuries. 4) A peak in women's convictions occurred in the 1950s, and most of the trial proceedings took place in rural Eastern Finland. Neither the state nor the police were active in prosecuting; instead, the trial proceedings began "by accident". 5) From 1940 to 1960 police training lacked instructions concerning the interrogation of women suspected of same-sex fornication. 6) The figure of the penitent woman was produced in the chiasmic encounter of confession and police interrogation which moulded and was moulded by the epistemological matrix of shame, honour, and decency. Women's speech acts were judicialised as confessions which enabled the disciplinary tampering with the women's bodies. 7) Gender and personality, more than sexuality, or "criminality" defined the status of the convicted women in their village communities after the trials. 8) Relations between police training, sexuality, and decency have not been well researched in Finland. 9) Decriminalisation in 1971 did not mark the end of homophobic legal discourse, even though the 1999 reform of sexual crimes took the form of gender neutral conceptualisation

Idealähtöistä koulualgebraa : IDEAA-opetusmallin kehittäminen algebran opetukseen peruskoulun 7. luokalla

This research is based on the problems in secondary school algebra I have noticed in my own work as a teacher of mathematics. Algebra does not touch the pupil, it remains knowledge that is not used or tested. Furthermore the performance level in algebra is quite low. This study presents a model for 7th grade algebra instruction in order to make algebra more natural and useful to students. I refer to the instruction model as the Idea-based Algebra (IDEAA). The basic ideas of this IDEAA model are 1) to combine children's own informal mathematics with scientific mathematics ("math math") and 2) to structure algebra content as a "map of big ideas", not as a traditional sequence of powers, polynomials, equations, and word problems. This research project is a kind of design process or design research. As such, this project has three, intertwined goals: research, design and pedagogical practice. I also assume three roles. As a researcher, I want to learn about learning and school algebra, its problems and possibilities. As a designer, I use research in the intervention to develop a shared artefact, the instruction model. In addition, I want to improve the practice through intervention and research. A design research like this is quite challenging. Its goals and means are intertwined and change in the research process. Theory emerges from the inquiry; it is not given a priori. The aim to improve instruction is normative, as one should take into account what "good" means in school algebra. An important part of my study is to work out these paradigmatic questions. The result of the study is threefold. The main result is the instruction model designed in the study. The second result is the theory that is developed of the teaching, learning and algebra. The third result is knowledge of the design process. The instruction model (IDEAA) is connected to four main features of good algebra education: 1) the situationality of learning, 2) learning as knowledge building, in which natural language and intuitive thinking work as "intermediaries", 3) the emergence and diversity of algebra, and 4) the development of high performance skills at any stage of instruction.

Lähi-itä - mielikuvat, media ja konflikti : Tutkimuskohteena opettajaopiskelijat

This study examines Finnish student teachers' images of The Middle East conflict and its parties and medias' influence on these images. The research problems are 1) how student teachers understand the Middle East as a geographical and a cultural area 2) what kind of conceptions they have of the Middle East conflict and its parties; Israelis, Palestinians and Arabs and societies and religions closely connected to them and 3) how the media has influenced on these conceptions. Theoretical background of this study concerns with different mental images, their construction and meaning, stereotypes, intercultural competence, media and its influence as well as media literacy. The methods used in this study were survey and theme interview. Also headlines of the news were analysed. The survey was directed at student teachers of the University of Helsinki (n = 75). Six of them were interviewed. The survey was conducted in February and interviews were made in the turn of May and June 2003. The headlines analysed dealt with the Middle East conflict in the newspaper "Helsingin Sanomat" in January, April and July 2003. Main results: Images of the Middle East area differed largely from respondent to another. Student teachers didn't know much about the Middle East conflict. Stereotypes occurred in the conceptions connected to the parties of the conflict. Stereotypes appeared especially in the negative conceptions of islam and muslims and one-sided conceptions of Arabs. The influence of the conflict was noticeable in conceptions related to Israelis, Israel and Palestinians. Palestinians were sympathized. Attitudes towards Israelis, Palestinians and Arabs were negative to some extend and their societies were not valued very equal, open or modern. On the basis of the research, student teachers' intercultural competence was not good enough. Media had influence on the conceptions. Also skills in critical use of media varied largely. Some trusted strongly in the objectivity of a picture and the news. It can be argued, on the grounds of the results, that teacher education should concentrate more on themes of intercultural competence and media literacy. These two are interrelated and are both needed in understanding and conceptualising the world.

Boundedness of weakly singular integral operators on domains

The monograph dissertation deals with kernel integral operators and their mapping properties on Euclidean domains. The associated kernels are weakly singular and examples of such are given by Green functions of certain elliptic partial differential equations. It is well known that mapping properties of the corresponding Green operators can be used to deduce a priori estimates for the solutions of these equations. In the dissertation, natural size- and cancellation conditions are quantified for kernels defined in domains. These kernels induce integral operators which are then composed with any partial differential operator of prescribed order, depending on the size of the kernel. The main object of study in this dissertation being the boundedness properties of such compositions, the main result is the characterization of their Lp-boundedness on suitably regular domains. In case the aforementioned kernels are defined in the whole Euclidean space, their partial derivatives of prescribed order turn out to be so called standard kernels that arise in connection with singular integral operators. The Lp-boundedness of singular integrals is characterized by the T1 theorem, which is originally due to David and Journé and was published in 1984 (Ann. of Math. 120). The main result in the dissertation can be interpreted as a T1 theorem for weakly singular integral operators. The dissertation deals also with special convolution type weakly singular integral operators that are defined on Euclidean spaces.

Puukaupan säännöt : Yksityismetsänomistajien ja metsäteollisuuden puukauppa Itä-Suomessa 1919 - 1939

The Finnish forest industry bought more than half of the timber used in factories and sawmills in the 1930s from non-industrial private forests (NIPF). This research investigates the rules conformed to this timber trade. The main research questions are: what were the rules that influenced the timber trade; and by whom they were set up? Attention is also paid to the factors which advanced the forest owners’ negotiation possibilities. A variety of sources were used: legal and company statutes, timber trade contracts, archives of the forest companies and organisations. Moreover, the written reminiscences collected by the Finnish Literature Society in the early 1970s were used to analyse the views of individual sellers and buyers. An institutional economics approach was applied as the theoretical framework of this study. In the timber trade the seller (forest owner) and the buyer (the employee of the forest company) agreed to the rules of the timber trade. They agreed about the amount and the price of the timber on sale, but also rules concerning, e.g., timber marking and harvesting. The forest companies had a strong control over the written contracts. Neither the private forest owners nor the forest organisations had much influence over these contracts. However, they managed to influence the rules which could not be found in the contracts. These written and unwritten rules regulated, for instance, the timber marking and measurement. The forest organisations such as Central Forestry Board Tapio (Keskusmetsäseura Tapio) and associations of forest owners (metsänhoitoyhdistykset) helped private forest owners in gaining more control over the timber marking. In timber marking, the forest owner selected trees to be included in the timber trade and gained more information, which he could use in the negotiations. The other rule, which was changed despite forest companies’ resistance, was the timber measurement. The Central Union of Agricultural Producers (MTK) negotiated with the Central Association of Finnish Woodworking Industries (SPKL) about changing the rules of the measurement practices. Even though SPKL did not support any changes, the new timber measurement law was accepted in the year 1938. The new law also created a supervisory authority to solve possible disagreements. Despite this the forest companies were still in charge of the measurement process in most cases. The private forest owners attained changes in the rules of the timber trade mainly during the 1930s. Earlier the relative weakness of the private forest organisations had diminished their negotiation positions. This changed in the 1930s as the private forest owners and their organisations became more active. At the same time the forest industry experienced a shortage of timber, especially pulp wood, and this provided the private forest owners with more leverage. Full-text (in Finnish) available at http://helda.helsinki.fi/handle/10224/4081

Accuracy of absorbed dose in external photon beam radiotherapy : what level is sufficient and how to approach it?

Radiation therapy (RT) plays currently significant role in curative treatments of several cancers. External beam RT is carried out mostly by using megavoltage beams of linear accelerators. Tumor eradication and normal tissue complications correlate to dose absorbed in tissues. Normally this dependence is steep and it is crucial that actual dose within patient accurately correspond to the planned dose. All factors in a RT procedure contain uncertainties requiring strict quality assurance. From hospital physicist´s point of a view, technical quality control (QC), dose calculations and methods for verification of correct treatment location are the most important subjects. Most important factor in technical QC is the verification that radiation production of an accelerator, called output, is within narrow acceptable limits. The output measurements are carried out according to a locally chosen dosimetric QC program defining measurement time interval and action levels. Dose calculation algorithms need to be configured for the accelerators by using measured beam data. The uncertainty of such data sets limits for best achievable calculation accuracy. All these dosimetric measurements require good experience, are workful, take up resources needed for treatments and are prone to several random and systematic sources of errors. Appropriate verification of treatment location is more important in intensity modulated radiation therapy (IMRT) than in conventional RT. This is due to steep dose gradients produced within or close to healthy tissues locating only a few millimetres from the targeted volume. The thesis was concentrated in investigation of the quality of dosimetric measurements, the efficacy of dosimetric QC programs, the verification of measured beam data and the effect of positional errors on the dose received by the major salivary glands in head and neck IMRT. A method was developed for the estimation of the effect of the use of different dosimetric QC programs on the overall uncertainty of dose. Data were provided to facilitate the choice of a sufficient QC program. The method takes into account local output stability and reproducibility of the dosimetric QC measurements. A method based on the model fitting of the results of the QC measurements was proposed for the estimation of both of these factors. The reduction of random measurement errors and optimization of QC procedure were also investigated. A method and suggestions were presented for these purposes. The accuracy of beam data was evaluated in Finnish RT centres. Sufficient accuracy level was estimated for the beam data. A method based on the use of reference beam data was developed for the QC of beam data. Dosimetric and geometric accuracy requirements were evaluated for head and neck IMRT when function of the major salivary glands is intended to be spared. These criteria are based on the dose response obtained for the glands. Random measurement errors could be reduced enabling lowering of action levels and prolongation of measurement time interval from 1 month to even 6 months simultaneously maintaining dose accuracy. The combined effect of the proposed methods, suggestions and criteria was found to facilitate the avoidance of maximal dose errors of up to even about 8 %. In addition, their use may make the strictest recommended overall dose accuracy level of 3 % (1SD) achievable.

The Scholarly Journal Re-engineered: A Case Study of an Open Access Journal in Construction IT

Open access is a new model for the publishing of scientific journals enabled by the Internet, in which the published articles are freely available for anyone to read. During the 1990’s hundreds of individual open access journals were founded by groups of academics, supported by grants and unpaid voluntary work. During the last five years other types of open access journals, funded by author charges have started to emerge and also established publishers have started to experiment with different variations of open access. This article reports on the experiences of one open access journal (The Electronic Journal of Information Technology in Construction, ITcon) over its ten year history. In addition to a straightforward account of the lessons learned the journal is also benchmarked against a number of competitors in the same research area and its development is put into the larger perspective of changes in scholarly publishing. The main findings are: That a journal publishing around 20-30 articles per year, equivalent to a typical quarterly journal, can sustainable be produced using an open source like production model. The journal outperforms its competitors in some respects, such as the speed of publication, availability of the results and balanced global distribution of authorship, and is on a par with them in most other respects. The key statistics for ITcon are: Acceptance rate 55 %. Average speed of publication 6-7 months. 801 subscribers to email alerts. Average number of downloads by human readers per paper per month 21.

How do Researchers Find and Retrieve Scientific Publications – A Case study of the Impact of the Internet on the Construction IT and Construction Management Research Communities

The World Wide Web provides the opportunity for a radically changed and much more efficient communication process for scientific results. A survey in the closely related domains of construction information technology and construction management was conducted in February 2000, aimed at measuring to what extent these opportunities are already changing the scientific information exchange and how researchers feel about the changes. The paper presents the results based on 236 replies to an extensive Web based questionnaire. 65% of the respondents stated their primary research interest as IT in A/E/C and 20% as construction management and economics. The questions dealt with how researchers find, access and read different sources; how much and what publications they read; how often and to which conferences they travel; how much they publish, and what are the criteria for where they eventually decide to publish. Some of the questions confronted traditional and electronic publishing with one final section dedicated to opinions about electronic publishing. According to the survey researchers already download half of the material that they read digitally from the Web. The most popular method for retrieving an interesting publication is downloading it for free from the author’s or publisher’s website. Researchers are not particularly willing to pay for electronic scientific publications. There is much support for a scenario of electronic journals available totally freely on the Web, where the costs could be covered by for instance professional societies or the publishing university. The shift that the Web is causing seems to be towards the "just in time" reading of literature. Also, frequent users of the Web rely less on scientific publications and tend to read fewer articles. If available with little effort, papers published in traditional journals are preferred; if not, the papers should be on the Web. In these circumstances, the role of paper-based journals published by established publishers is shifting from the core "information exchange" to the building of authors' prestige. The respondents feel they should build up their reputations by publishing in journals and relevant conferences, but then make their work freely available on the Web.

IT-Innovationer i svenska bygg- och fastighetssektorn

Utvecklingen inom informationsteknologin (IT) har under de senaste decennierna bidragit till stora förändringar i vårt samhälle och i våra industrier. Tillgången till bland annat persondatorer, mobiltelefoner och Internet har förändrat vårt sätt att hantera information och att kommunicera. Att IT också ökat företags och industriers produktivitet och effektivitet har kunnat mätas. Detta har utgjort bakgrunden till avhandlingens frågeställning, nämligen hur IT har påverkat bygg- och fastighetssektorn. Syftet har varit att undersöka hur och i vilken utsträckning IT används inom sektorn, samt varför användningen inom sektorn sker på det sättet och i den utsträckningen. Fem datainsamlingar har utförts för att uppfylla forskningens syfte. Tre har utförts kvantitativt genom enkätundersökningar och två kvalitativt genom intervjustudier. Den kvantitativa delen inleddes med att skapa enkätverktyget, vilket sedan använts tre gånger. Datainsamlingarna har skett under perioden 1998 till 2009 och de skapar därmed, förutom ögonblicksbilder, ett longitudinellt perspektiv på utvecklingen. Tre fokusområden har identifierats som särskilt intressanta ur ett sektorsperspektiv: elektroniska affärer (EDI), elektronisk dokumenthantering (EDM) samt byggnadsinformationsmodeller (BIM). Dessa har studerats både kvantitativt och kvalitativt. Undersökningarna visar att tillgången till IT-infrastruktur inom sektorn är god, men att IT huvudsakligen används för att effektivisera befintliga arbetssätt och processer med fokus på administration. IT har också bidragit starkt till bättre kommunikationer. Dock används IT i liten omfattning för att skapa nya produkter, processer eller affärsmodeller. Entreprenörerna är de som använder IT i lägst utsträckning. Bygg- och fastighetssektorns starkt projektbaserade organisation medför svårigheter för innovationsspridning, särskilt när innovationerna kräver engagemang från flera aktörer. Tre sådana innovationer, EDM, EDI och BIM har under de senaste åren börjat spridas inom sektorn där EDM hittills nått högst användning och BIM lägst. Olika modeller för införande och implementering av IT i företagen inom sektorn har använts för att studera vilka faktorer som påverkar beslut på olika nivåer. Den praktiska nyttan eller det förväntade resultatet av varje innovation är en starkt pådrivande faktor för beslut. Initiala beslut för införande har visat sig ske på olika nivåer. För EDM sker detta i projekt, för EDI i de enskilda företagen och för BIM hos individer. EDM har tydligast fullföljt implementeringsmodellens steg, följt av EDI och därefter BIM. Fokusområdet BIM har störst potential att skapa positiva effekter samt påverkar processer och metoder i störst utsträckning. Tidiga tillämpare bland företagen har börjat tillsätta resurser för dessa förändringar, men det har ännu inte skett i samma omfattning som för de två andra områdena.

Museoesineitä Itä-Karjalasta : Väinö Tuomaalan jatkosodan aikana keräämä esinekokoelma ja sen syntyhistoria

Jatkosodan aikana kerättiin Suomen valtaamalta alueelta Itä-Karjalasta tuhansittain museoesineitä Suomen museoihin. Kansallismuseon kokoelmiin kerättiin esineitä lähinnä suomenheimoisilta mutta myös isovenäläisiltä. Tämän tutkimuksen kohteena on lähes 400:n esineen kokoelma, joka toimitettiin Kansallismuseoon vuosina 1941 1944 ja merkittiin kansallisuudeltaan venäläiseksi. Näistä venäläisistä esineistä suurimman osan keräsi alikersanttina palvellut Väinö Tuomaala. Tutkimukseni tarkastelee Väinö Tuomaalan kokoelmaa ja etsii syitä siihen, miksi kokoelma on sellainen kuin se on, miksi se ja koko venäläisten esineiden kokoelma syntyi ja mitkä seikat vaikuttivat Tuomaalan esinevalintoihin. Tutkimuksen teoria rakentuu museologisen kirjallisuuden varaan. Tutkimuksessa tarkastellaan Väinö Tuomaalan kokoelman keräyskonteksteja. Keräyskonteksteihin kuuluvat kokoelman kerääjä, keräysajankohta ja -paikka sekä yhteenkuuluvat esineet, eli muut venäläiset esineet. Kerääjän tarkastelussa huomioidaan hänen henkilöhistoriansa ja etsitään mahdollisia keruuseen vaikuttaneita tekijöitä. Keräysajankohdan tarkastelussa huomio kiinnittyy keruuympäristöön, eli vallitseviin olosuhteisiin ja aatteelliseen ilmapiiriin, joiden vaikutuksen alaisena keruu suoritettiin. Primääriaineisto koostuu Kansallismuseon alaisen Kulttuurien museon yleisetnografisten esineiden kokoelmaan kuuluvista 198:sta Väinö Tuomaalan keräämästä esineestä verifikaatteineen, jotka ovat osa 393 esinettä käsittävästä venäläisestä kokoelmasta. Aineisto sisältää myös eri arkistojen materiaalia. Kansallisarkiston Sörnäisten toimipisteestä, entisestä sota-arkistota, löytyneitä sotapäiväkirjoja ja Tuomaalan kantakorttia on tutkimuksessa käytetty jatkosodan tapahtumien esittämiseen. Museoviraston hallinto-osaston arkiston kirjeet ja pöytäkirjat ovat antaneet tietoa kulttuurikeruun organisoinnista. Väinö Tuomaalan arkistokokoelma Seinäjoella sisältää Tuomaalan keräämää perinneaineistoa, hänen puheitaan, lehtikirjoituksiaan ja kirjeenvaihtoaan. Myös Evijärven kunnantalon kotiseutuarkistosta löytyneet kirjeet ovat valottaneet Tuomaalan jatkosodan aikaista keruutoimintaa. Suomalaisen Kirjallisuuden Seuran arkistot ovat tarjonneet materiaalia jatkosodan aikaisesta kulttuurikeruusta. Koko venäläisten esineiden kokoelma syntyi sattumalta ja organisoimattoman toiminnan tuloksena, jossa aktiivisia toimijoita olivat yksittäiset kerääjät. Intohimoisesta suhtautumisesta kansatieteellistä keruuta kohtaan johtuen, Tuomaala olisi todenäköisesti kerännyt museoesineitä missä päin Itä-Karjalaa tahansa. Väinö Tuomaalan Itä-Karjalassa keräämä esinekokoelma oli luonnollinen jatke hänen kotiseudullaan aloittamalleen keräystoiminnalle. Tuomaalan jatkosodan aikana keräämä kokoelma on kerääjän mieltymysten mukainen yritys kerätä vanhaa itäkarjalaista, kansallista talonpoikaiskulttuuria. Tuomaala pyrki keräämään klassista kansatieteellistä aineistoa monipuolisesti kansankulttuurin eri elämänalueilta. Tuomaalan esinekeruussa näkyi vahvasti talonpoikaiskulttuurin ihannointi ja halu pelastaa osa siitä tuleville sukupolville. Yrityksen onnistumiseen vaikuttivat sodanajan olosuhteet sekä aatteellinen ilmapiiri. Esineiden saatavuudella oli merkittävä osa kokoelman muodostumiseen, samoin Tuomaalan käsityksillä heimokansoista, Suur-Suomesta ja venäläisistä. Keruuvalintoihin ja keruun jatkumiseen vaikuttivat myös Kansallismuseon henkilökunta ja työstä saatu tunnustus.

Svekofennialaisen orogenian ylityönnön terminen mallinnus Itä-Suomen arkeeisella kratonilla

This study reviews the thermophysical properties of rocks and the lithosphere and describes a one dimensional thermal numeric model of hypothetical 20 km thick overthrust plate obtruded on to the Archeaen craton in the Svecofennian orogeny (1.92-1.77 Ga). The objective is to find out if the overthrust plate and its radiogenic heat sources were able to produce the thermal effects observed on the current erosion level of the Archaean craton. Heat transfer in lithosphere is assumed conductive, and advective heat transfer due to melting and melt transfer is supposed negligible. The study area is located in the Eastern Finland, approximately current Kainuu and Northern Karelia regions, east from the most active orogenic belt (Raahe-Ladoga zone), so that orogenic magmatism can be neglected. Physical parameters and boundary conditions for the model are from different earlier published sources: deep seismic profiles (rock variation in depth), laboratory measurements (heat production and conductivity of rocks), field measurements (heat flow densities), and pT(t) estimations from the Finnish precambrian to estimate the size and thickness of the sheet. Comparison of the modelling results to previous K-Ar datings and other pTt estimations show, that the effect of the overthrust sheet has been adequate (max. T 450°C at 4 kbar) to produce the K-Ar resetting ages measured from the Archaean bedrock at current erosion level. No other kind of thermal activation in lithosphere is required. Results show possibly very minor partial melting in upper middle crust underneath the overthrust sheet.