Mutations as molecular tools : The metabolic-rate dependent molecular clock and DNA barcoding of allied species

Mutation and recombination are the fundamental processes leading to genetic variation in natural populations. This variation forms the raw material for evolution through natural selection and drift. Therefore, studying mutation rates may reveal information about evolutionary histories as well as phylogenetic interrelationships of organisms. In this thesis two molecular tools, DNA barcoding and the molecular clock were examined. In the first part, the efficiency of mutations to delineate closely related species was tested and the implications for conservation practices were assessed. The second part investigated the proposition that a constant mutation rate exists within invertebrates, in form of a metabolic-rate dependent molecular clock, which can be applied to accurately date speciation events. DNA barcoding aspires to be an efficient technique to not only distinguish between species but also reveal population-level variation solely relying on mutations found on a short stretch of a single gene. In this thesis barcoding was applied to discriminate between Hylochares populations from Russian Karelia and new Hylochares findings from the greater Helsinki region in Finland. Although barcoding failed to delineate the two reproductively isolated groups, their distinct morphological features and differing life-history traits led to their classification as two closely related, although separate species. The lack of genetic differentiation appears to be due to a recent divergence event not yet reflected in the beetles molecular make-up. Thus, the Russian Hylochares was described as a new species. The Finnish species, previously considered as locally extinct, was recognized as endangered. Even if, due to their identical genetic make-up, the populations had been regarded as conspecific, conservation strategies based on prior knowledge from Russia would not have guaranteed the survival of the Finnish beetle. Therefore, new conservation actions based on detailed studies of the biology and life-history of the Finnish Hylochares were conducted to protect this endemic rarity in Finland. The idea behind the strict molecular clock is that mutation rates are constant over evolutionary time and may thus be used to infer species divergence dates. However, one of the most recent theories argues that a strict clock does not tick per unit of time but that it has a constant substitution rate per unit of mass-specific metabolic energy. Therefore, according to this hypothesis, molecular clocks have to be recalibrated taking body size and temperature into account. This thesis tested the temperature effect on mutation rates in equally sized invertebrates. For the first dataset (family Eucnemidae, Coleoptera) the phylogenetic interrelationships and evolutionary history of the genus Arrhipis had to be inferred before the influence of temperature on substitution rates could be studied. Further, a second, larger invertebrate dataset (family Syrphidae, Diptera) was employed. Several methodological approaches, a number of genes and multiple molecular clock models revealed that there was no consistent relationship between temperature and mutation rate for the taxa under study. Thus, the body size effect, observed in vertebrates but controversial for invertebrates, rather than temperature may be the underlying driving force behind the metabolic-rate dependent molecular clock. Therefore, the metabolic-rate dependent molecular clock does not hold for the here studied invertebrate groups. This thesis emphasizes that molecular techniques relying on mutation rates have to be applied with caution. Whereas they may work satisfactorily under certain conditions for specific taxa, they may fail for others. The molecular clock as well as DNA barcoding should incorporate all the information and data available to obtain comprehensive estimations of the existing biodiversity and its evolutionary history.

Studies on diamond-like carbon and novel diamond-like carbon polymer hybrid coatings deposited with filtered pulsed arc discharge method

The main obstacle for the application of high quality diamond-like carbon (DLC) coatings has been the lack of adhesion to the substrate as the coating thickness is increased. The aim of this study was to improve the filtered pulsed arc discharge (FPAD) method. With this method it is possible to achieve high DLC coating thicknesses necessary for practical applications. The energy of the carbon ions was measured with an optoelectronic time-of-flight method. An in situ cathode polishing system used for stabilizing the process yield and the carbon ion energies is presented. Simultaneously the quality of the coatings can be controlled. To optimise the quality of the deposition process a simple, fast and inexpensive method using silicon wafers as test substrates was developed. This method was used for evaluating the suitability of a simplified arc-discharge set-up for the deposition of the adhesion layer of DLC coatings. A whole new group of materials discovered by our research group, the diamond-like carbon polymer hybrid (DLC-p-h) coatings, is also presented. The parent polymers used in these novel coatings were polydimethylsiloxane (PDMS) and polytetrafluoroethylene (PTFE). The energy of the plasma ions was found to increase when the anode-cathode distance and the arc voltage were increased. A constant deposition rate for continuous coating runs was obtained with an in situ cathode polishing system. The novel DLC-p-h coatings were found to be water and oil repellent and harder than any polymers. The lowest sliding angle ever measured from a solid surface, 0.15 ± 0.03°, was measured on a DLC-PDMS-h coating. In the FPAD system carbon ions can be accelerated to high energies (≈ 1 keV) necessary for the optimal adhesion (the substrate is broken in the adhesion and quality test) of ultra thick (up to 200 µm) DLC coatings by increasing the anode-cathode distance and using high voltages (up to 4 kV). An excellent adhesion can also be obtained with the simplified arc-discharge device. To maintain high process yield (5µm/h over a surface area of 150 cm2) and to stabilize the carbon ion energies and the high quality (sp3 fraction up to 85%) of the resulting coating, an in situ cathode polishing system must be used. DLC-PDMS-h coating is the superior candidate coating material for anti-soiling applications where also hardness is required.

Work Stress and Early Atherosclerosis: Do Genetic Background and Pre-Employment Risk Factors Explain Conflicting Findings?

According to the models conceptualizing work stress, increased risk of health problems arise when high job demands co-occur with low job control (the demand-control model) or the efforts invested by the employee are disproportionately high compared to the rewards received (effort-reward imbalance model). This study examined the association between work stress and early atherosclerosis with particular attention to the role of pre-employment risk factors and genetic background in this association. The subjects were young healthy adults aged 24-39 who were participating in the 21-year follow-up of the ongoing prospective "Cardiovascular Risk in Young Finns" study in 2001-2002. Work stress was evaluated with questionnaires on demand-control model and on effort-reward model. Atherosclerosis was assessed with ultrasound of carotid artery intima-media thickness (IMT). In addition, risk for enhanced atherosclerotic process was assessed by measuring with heart rate variability and heart rate. Pre-employment risk factors, measured at age 12 to 18, included such as body mass index, blood lipids, family history of coronary heart disease, and parental socioeconomic position. Variants of the neuregulin-1 were determined using genomic DNA. The results showed that higher work stress was associated with higher IMT in men. This association was not attenuated by traditional risk factors of atherosclerosis and coronary heart disease or by pre-employment risk factors measured in adolescence. Neuregulin-1 gene moderated the association between work stress and IMT in men. A significant association between work stress and IMT was found only for the T/T genotype of the neuregulin-1 gene but not for other genotypes. Among women an association was found between higher work stress and lower heart rate variability, suggesting higher risk for developing atherosclerosis. These associations could not be explained by demographic characteristics or coronary risk factors. The present findings provide evidence for an association between work stress and atherosclerosis in relatively young population. This association seems to be modified by genetic influences but it does not appear to be confounded by pre-employment adolescent risk factors.

Self-reported bruxism : Associated factors among media personnel with or without irregular shift work

Tutkimuksen kohderyhmänä oli mediatyöntekijöitä, joiden toimenkuva on viime vuosina muuttunut yhä kuormittavammaksi epäsäännöllisen vuorotyön sekä jatkuvien teknisten, organisatoristen ja taloudellisten tekijöiden ristipaineessa. Väitöskirjatutkimus on osa laajempaa tutkimushanketta, joka suunniteltiin selvittämään epäsäännöllisen vuorotyön mahdollisia haittoja. Tutkimusta tukivat taloudellisesti Työsuojelurahasto ja Suomen Hammaslääkäriseura Apollonia sekä resurssipanostuksin Hammaslääketieteen laitos (HY), Työterveyslaitos ja Yleisradio Oy. Bruksismi on tahdosta riippumatonta hampaiden narskuttelua tai yhteenpuristamista. Hampaiden narskuttelu on rytmistä jaksoittain toistuvaa puremalihasten toimintaa, joka esiintyy nukkuessa -tavallisimmin kevyen unen ja havahtumisjaksojen yhteydessä. Valveilla ollessa bruksismi on terveillä ihmisillä lähinnä hampaiden yhteenpuristamista. Yleisen käsityksen mukaan toistuvaa unibruksismia esiintyy noin 10 %:lla ja valveilla tapahtuvaa hampaiden yhteenpuristamista noin 20 %:lla. Aiemmin bruksismi kuului kansainvälisen unihäiriöluokituksen (ICSD 1997) mukaan unen erityishäiriöihin, mutta tuorein luokitus (ICSD 2005) listaa sen unen liikehäiriöihin. Väitöstutkimuksen yleisenä tavoitteena oli kartoittaa koetun bruksismin ja uni- valvehäiriöiden yhteyttä. Tutkimus oli poikittainen vertailututkimus epäsäännöllistä vuorotyötä ja säännöllisiä päivävuoroja tekevien välillä. Mielenkiinto kohdistui myös bruksismin ja kasvojen alueen kivun mahdolliseen yhteyteen. Lisäksi tutkimuksessa selvitettiin joidenkin tunnetusti unen laatua huonontavien psykososiaalisten, neurologisten ja fysiologisten tekijöiden yhteyttä koettuun bruksismiin. Tutkimuksen kohderyhmän muodosti 750 Yleisradion epäsäännöllistä vuorotyötä tekevää työntekijää. Vertailuryhmänä käytettiin samansuuruista satunnaistetusti valittua kaltaistettua Yleisradion työntekijäjoukkoa, joka tekee samankaltaista työtä, mutta säännöllisenä päivätyönä. Kohderyhmälle lähetettiin kyselylomakkeet, jotka kartoittivat koetun bruksismin lisäksi mm. tutkittavien taustatiedot, yleisen terveydentilan, yleisiä koettuja stressioireita ja tuntemuksia, kipuoireita, sekä unen laatua. Lisäksi esitettiin jaksamista ja työympäristöä koskevia kysymyksiä. Kyselyyn vastasi kaikkiaan 874 henkilöä. Kokonaisvastausprosentti oli 58,3 % (53,7 % miehiä). Epäsäännöllistä vuorotyötä tekevien vastausprosentti oli 82,3 % ja säännöllistä päivätyötä tekevien ryhmässä 34,3 %. Työtehtävät sisälsivät ohjelmien toimitus- ja tuottamistyötä, teknistä tuotanto- ja tukityötä, sekä esimies- ja hallintotyötä. Miesten keski-ikä vuorotyöryhmässä oli 45,0 (± 10,6) vuotta ja naisten keski-ikä 42,6 (± 10,7) vuotta, vastaavat luvut päivätyötä tekeville olivat 47,4 (± 9,7) ja 45,5 (± 10,1) vuotta. Vuorotyötä tekevistä oli miehiä 56,6 %, päivätyöryhmässä miehien osuus oli 46,7 %. Usein koettua bruksismia havaittiin koko tutkimusjoukossa 10,6 %:lla. Bruksismin esiintyvyydessä ei ollut merkitsevää eroa epäsäännöllistä vuorotyötä ja päivätyötä tekevien välillä. Kun bruksismia ja stressiä arvioitiin suhteessa tyytyväisyyteen nykyiseen työaikamuotoon, molemmat olivat merkitsevästi vallitsevimpia niillä, jotka halusivat vaihtaa nykyistä työaikamuotoaan. Epäsäännöllistä vuorotyötä tekevät lisäksi ilmoittivat kokevansa enemmän stressiä kuin päivätyötä tekevät sekä olivat tyytymättömämpiä työaikamuotoonsa. Tutkittavista henkilöistä katkonaista unta esiintyi 43,6 %:lla sekä 36,2 % koki unensa virkistämättömäksi. Kasvokipua esiintyi 19,6 %:lla. Usein toistuva bruksaus sekä tyytymättömyys työaikamuotoon olivat erittäin merkitsevästi yhteydessä unihäiriöiden sekä riittämättömän unen oireiden kanssa. Bruksismi ja katkonainen uni osoittautuivat myös kasvokivun taustatekijöiksi. Tutkimus osoitti, että koetulla bruksismilla oli merkitsevä yhteys unihäiriöihin, kasvokipuun, koettuun stressiin ja ahdistuneisuuteen, nuorempaan ikään, runsaampiin hammaslääkäri- ja lääkärikäynteihin sekä siihen että oli tyytymätön työaikamuotoonsa (itse työaikamuoto ei ollut merkitsevä tekijä). Tutkimuksen yhtenä johtopäätöksenä todettiin, että koettu bruksismi voi terveillä työikäisillä henkilöillä olla osa stressaavaa tilannetta ja siihen liittyvää käyttäytymistä. Tämän tiedostaminen terveydenhuollossa voisi olla hyödyllistä.

Cancer survivors at work : Work-related problems and factors associated with their employment, work ability and social support from the work community

Due to the improved prognosis of many forms of cancer, an increasing number of cancer survivors are willing to return to work after their treatment. It is generally believed, however, that people with cancer are either unemployed, stay at home, or retire more often than people without cancer. This study investigated the problems that cancer survivors experience on the labour market, as well as the disease-related, sociodemographic and psychosocial factors at work that are associated with the employment and work ability of cancer survivors. The impact of cancer on employment was studied combining the data of Finnish Cancer Registry and census data of the years 1985, 1990, 1995 or 1997 of Statistics Finland. There were two data sets containing 46 312 and 12 542 people with cancer. The results showed that cancer survivors were slightly less often employed than their referents. Two to three years after the diagnosis the employment rate of the cancer survivors was 9% lower than that of their referents (64% vs. 73%), whereas the employment rate was the same before the diagnosis (78%). The employment rate varied greatly according to the cancer type and education. The probability of being employed was greater in the lower than in the higher educational groups. People with cancer were less often employed than people without cancer mainly because of their higher retirement rate (34% vs. 27%). As well as employment, retirement varied by cancer type. The risk of retirement was twofold for people having cancer of the nervous system or people with leukaemia compared to their referents, whereas people with skin cancer, for example, did not have an increased risk of retirement. The aim of the questionnaire study was to investigate whether the work ability of cancer survivors differs from that of people without cancer and whether cancer had impaired their work ability. There were 591 cancer survivors and 757 referents in the data. Even though current work ability of cancer survivors did not differ between the survivors and their referents, 26% of cancer survivors reported that their physical work ability, and 19% that their mental work ability had deteriorated due to cancer. The survivors who had other diseases or had had chemotherapy, most often reported impaired work ability, whereas survivors with a strong commitment to their work organization, or a good social climate at work, reported impairment less frequently. The aim of the other questionnaire study containing 640 people with the history of cancer was to examine extent of social support that cancer survivors needed, and had received from their work community. The cancer survivors had received most support from their co-workers, and they hoped for more support especially from the occupational health care personnel (39% of women and 29% of men). More support was especially needed by men who had lymphoma, had received chemotherapy or had a low education level. The results of this study show that the majority of the survivors are able to return to work. There is, however, a group of cancer survivors who leave work life early, have impaired work ability due to their illness, and suffer from lack of support from their work place and the occupational health services. Treatment-related, as well as sociodemographic factors play an important role in survivors' work-related problems, and presumably their possibilities to continue working.

Open and closed boundaries in large-scale convective dynamos

Earlier work has suggested that large-scale dynamos can reach and maintain equipartition field strengths on a dynamical time scale only if magnetic helicity of the fluctuating field can be shed from the domain through open boundaries. To test this scenario in convection-driven dynamos by comparing results for open and closed boundary conditions. Three-dimensional numerical simulations of turbulent compressible convection with shear and rotation are used to study the effects of boundary conditions on the excitation and saturation level of large-scale dynamos. Open (vertical field) and closed (perfect conductor) boundary conditions are used for the magnetic field. The contours of shear are vertical, crossing the outer surface, and are thus ideally suited for driving a shear-induced magnetic helicity flux. We find that for given shear and rotation rate, the growth rate of the magnetic field is larger if open boundary conditions are used. The growth rate first increases for small magnetic Reynolds number, Rm, but then levels off at an approximately constant value for intermediate values of Rm. For large enough Rm, a small-scale dynamo is excited and the growth rate in this regime increases proportional to Rm^(1/2). In the nonlinear regime, the saturation level of the energy of the mean magnetic field is independent of Rm when open boundaries are used. In the case of perfect conductor boundaries, the saturation level first increases as a function of Rm, but then decreases proportional to Rm^(-1) for Rm > 30, indicative of catastrophic quenching. These results suggest that the shear-induced magnetic helicity flux is efficient in alleviating catastrophic quenching when open boundaries are used. The horizontally averaged mean field is still weakly decreasing as a function of Rm even for open boundaries.

On formation, growth and concentrations of air ions

Aerosol particles have effect on climate, visibility, air quality and human health. However, the strength of which aerosol particles affect our everyday life is not well described or entirely understood. Therefore, investigations of different processes and phenomena including e.g. primary particle sources, initial steps of secondary particle formation and growth, significance of charged particles in particle formation, as well as redistribution mechanisms in the atmosphere are required. In this work sources, sinks and concentrations of air ions (charged molecules, cluster and particles) were investigated directly by measuring air molecule ionising components (i.e. radon activity concentrations and external radiation dose rates) and charged particle size distributions, as well as based on literature review. The obtained results gave comprehensive and valuable picture of the spatial and temporal variation of the air ion sources, sinks and concentrations to use as input parameters in local and global scale climate models. Newly developed air ion spectrometers (Airel Ltd.) offered a possibility to investigate atmospheric (charged) particle formation and growth at sub-3 nm sizes. Therefore, new visual classification schemes for charged particle formation events were developed, and a newly developed particle growth rate method was tested with over one year dataset. These data analysis methods have been widely utilised by other researchers since introducing them. This thesis resulted interesting characteristics of atmospheric particle formation and growth: e.g. particle growth may sometimes be suppressed before detection limit (~ 3 nm) of traditional aerosol instruments, particle formation may take place during daytime as well as in the evening, growth rates of sub-3 nm particles were quite constant throughout the year while growth rates of larger particles (3-20 nm in diameter) were higher during summer compared to winter. These observations were thought to be a consequence of availability of condensing vapours. The observations of this thesis offered new understanding of the particle formation in the atmosphere. However, the role of ions in particle formation, which is not well understood with current knowledge, requires further research in future.

Dual-trap optical tweezers with real-time force clamp control

Single molecule force clamp experiments are widely used to investigate how enzymes, molecular motors, and other molecular mechanisms work. We developed a dual-trap optical tweezers instrument with real-time (200 kHz update rate) force clamp control that can exert 0–100 pN forces on trapped beads. A model for force clamp experiments in the dumbbell-geometry is presented. We observe good agreement between predicted and observed power spectra of bead position and force fluctuations. The model can be used to predict and optimize the dynamics of real-time force clamp optical tweezers instruments. The results from a proof-of-principle experiment in which lambda exonuclease converts a double-stranded DNA tether, held at constant tension, into its single-stranded form, show that the developed instrument is suitable for experiments in single molecule biology.

Sedimentary zooplankton remains as indicators of lake ecological quality and trophic structure

To protect and restore lake ecosystems under threats posed by the increasing human population, information on their ecological quality is needed. Lake sediments provide a data rich archive that allows identification of various biological components present prior to anthropogenic alterations as well as a constant record of changes. By providing a longer dimension of time than any ongoing monitoring programme, palaeolimnological methods can help in understanding natural variability and long-term ecological changes in lakes. As zooplankton have a central role in the lake food web, their remains can potentially provide versatile information on past trophic structure. However, various taphonomic processes operating in the lakes still raise questions concerning how subfossil assemblages reflect living communities. This thesis work aimed at improving the use of sedimentary zooplankton remains in the reconstruction of past zooplankton communities and the trophic structure in lakes. To quantify interspecific differences in the accumulation of remains, the subfossils of nine pelagic zooplankton taxa in annually laminated sediments were compared with monitoring results for live zooplankton in Lake Vesijärvi. This lake has a known history of eutrophication and recovery, which resulted from reduced external loading and effective fishing of plankti-benthivorous fish. The response of zooplankton assemblages to these known changes was resolved using annually laminated sediments. The generality of the responses observed in Lake Vesijärvi were further tested with a set of 31 lakes in Southern Finland, relating subfossils in surface sediments to contemporary water quality and fish density, as well as to lake morphometry. The results demonstrated differential preservation and retention of cladoceran species in the sediment. Daphnia, Diaphanosoma and Ceriodaphnia were clearly underrepresented in the sediment samples in comparison to well-preserved Bosmina species, Chydorus, Limnosida and Leptodora. For well-preserved species, the annual net accumulation rate was similar to or above the expected values, reflecting effective sediment focusing and accumulation in the deepest part of the lake. The decreased fish density and improved water quality led to subtle changes in zooplankton community composition. The abundance of Diaphanosoma and Limnosida increased after the reduction in fish density, while Ceriodaphnia and rotifers decreased. The most sensitive indicator of fish density was the mean size of Daphnia ephippia and Bosmina (E.) crassicornis ephippia and carapaces. The concentration of plant-associated species increased, reflecting expanding littoral vegetation along with increasing transparency. Several of the patterns observed in Lake Vesijärvi could also be found within the set of 31 lakes. According to this thesis work, the most useful cladoceran-based indices for nutrient status and planktivorous fish density in Finnish lakes were the relative abundances of certain pelagic taxa, and the mean size of Bosmina spp. carapaces, especially those of Bosmina (E.) cf. coregoni. The abundance of plant-associated species reflected the potential area for aquatic plants. Lake morphometry and sediment organic content, however, explained a relatively high proportion of the variance in the species data, and more studies are needed to quantify lake-specific differences in the accumulation and preservation of remains. Commonly occurring multicollinearity between environmental variables obstructs the cladoceran-based reconstruction of single environmental variables. As taphonomic factors and several direct and indirect structuring forces in lake ecosystems simultaneously affect zooplankton, the subfossil assemblages should be studied in a holistic way before making final conclusions about the trophic structure and the change in lake ecological quality.