The Electronic Journal of Information Technology in Construction (ITcon): An Open Access Journal Using an Un-paid, Volunteer-Based Organization

Introduction This case study is based on the experiences with the Electronic Journal of Information Technology in Construction (ITcon), founded in 1995. Development This journal is an example of a particular category of open access journals, which use neither author charges nor subscriptions to finance their operations, but rely largely on unpaid voluntary work in the spirit of the open source movement. The journal has, after some initial struggle, survived its first decade and is now established as one of half-a-dozen peer reviewed journals in its field. Operations The journal publishes articles as they become ready, but creates virtual issues through alerting messages to “subscribers”. It has also started to publish special issues, since this helps in attracting submissions, and also helps in sharing the work-load of review management. From the start the journal adopted a rather traditional layout of the articles. After the first few years the HTML version was dropped and papers are only published in PDF format. Performance The journal has recently been benchmarked against the competing journals in its field. Its acceptance rate of 53% is slightly higher and its average turnaround time of seven months almost a year faster compared to those journals in the sample for which data could be obtained. The server log files for the past three years have also been studied. Conclusions Our overall experience demonstrates that it is possible to publish this type of OA journal, with a yearly publishing volume equal to a quarterly journal and involving the processing of some fifty submissions a year, using a networked volunteer-based organization.

Information Technology in Construction – Domain Definition and Research Issues

This article discusses the scope of research on the application of information technology in construction (ITC). A model of the information and material activities which together constitute the construction process is presented, using the IDEF0 activity modelling methodology. Information technology is defined to include all kinds of technology used for the storage, transfer and manipulation of information, thus also including devices such as copying machines, faxes and mobile phones. Using the model the domain of ITC research is defined as the use of information technology to facilitate and re-engineer the information process component of construction. Developments during the last decades in IT use in construction is discussed against a background of a simplified model of generic information processing tasks. The scope of ITC is compared with the scopes of research in related areas such as design methodology, construction management and facilities management. Health care is proposed as an interesting alternative (to the often used car manufacturing industry), as an IT application domain to compare with. Some of the key areas of ITC research in recent years; expert systems, company IT strategies, and product modelling are shortly discussed. The article finishes with a short discussion of the problems of applying standard scientific methodology in ITC research, in particular in product model research.

Information Technology Development Needs in Community Pharmacies : A Strategic Approach

In the context of health care, information technology (IT) has an important role in the operational infrastructure, ranging from business management to patient care. An essential part of the system is medication management in inpatient and outpatient care. Community pharmacists strategy has been to extend practice responsibilities beyond dispensing towards patient care services. Few studies have evaluated the strategic development of IT systems to support this vision. The objectives of this study were to assess and compare independent Finnish community pharmacy owners and staff pharmacists priorities concerning the content and structure of the next generation of community pharmacy IT systems, to explore international experts visions and strategic views on IT development needs in relation to services provided in community pharmacies, to identify IT innovations facilitating patient care services and to evaluate their development and implementation processes, and to assess community pharmacists readiness to adopt innovations. This study applied both qualitative and quantitative methods. A qualitative personal interview of 14 experts in community pharmacy services and related IT from eight countries and a national survey of Finnish community pharmacy owners (mail survey, response rate 53%, n=308), and of a representative sample of staff pharmacists (online survey, response rate 22%, n=373) were conducted. Finnish independent community pharmacy owners gave priority to logistical functions but also to those related to medication information and patient care. The managers and staff pharmacists have different views of the importance of IT features, reflecting their different professional duties in the community pharmacy. This indicates the need for involving different occupation groups in planning the new IT systems for community pharmacies. A majority of the international experts shared the vision of community pharmacy adopting a patient care orientation; supported by IT-based documentation, new technological solutions, access to information, and shared patient data. Community pharmacy IT innovations were rare, which is paradoxical because owners and staff pharmacists perception of their innovativeness was seen as being high. Community pharmacy IT systems development processes usually had not undergone systematic needs assessment research beforehand or evaluation after the implementation and were most often coordinated by national governments without subsequent commercialization. Specifically, community pharmacy IT developments lack research, organization, leadership and user involvement in the process. Those responsible for IT development in the community pharmacy sector should create long-term IT development strategies that are in line with community pharmacy service development strategies. This could provide systematic guidance for future projects to ensure that potential innovations are based on a sufficient understanding of pharmacy practice problems that they are intended to solve, and to encourage strong leadership in research, development of innovations so that community pharmacists potential innovativeness is used, and that professional needs and strategic priorities will be considered even if the development process is led by those outside the profession.

Adnominal Person in the Morphological System of Erzya : Adnominaalinen persoona ersän kielen morfologisessa järjestelmässä

This dissertation is a synchronic description of adnominal person in the highly synthetic morphological system of Erzya as attested in extensive Erzya-language written-text corpora consisting of nearly 140 publications with over 4.5 million words and over 285,000 unique lexical items. Insight for this description have been obtained from several source grammars in German, Russian, Erzya, Finnish, Estonian and Hungarian, as well as bounteous discussions in the understanding of the language with native speakers and grammarians 1993 2010. Introductory information includes the discussion of the status of Erzya as a lan- guage, the enumeration of phonemes generally used in the transliteration of texts and an in-depth description of adnominal morphology. The reader is then made aware of typological and Erzya-specifc work in the study of adnominal-type person. Methods of description draw upon the prerequisite information required in the development of a two-level morphological analyzer, as can be obtained in the typological description of allomorphic variation in the target language. Indication of original author or dialect background is considered important in the attestation of linguistic phenomena, such that variation might be plotted for a synchronic description of the language. The phonological description includes the establishment of a 6-vowel, 29-consonant phoneme system for use in the transliteration of annotated texts, i.e. two phonemes more than are generally recognized, and numerous rules governing allophonic variation in the language. Erzya adnominal morphology is demonstrated to have a three-way split in stem types and a three-layer system of non-derivative affixation. The adnominal-affixation layers are broken into (a) declension (the categories of case, number and deictic marking); (b) nominal conjugation (non-verb grammatical and oblique-case items can be conjugated), and (c) clitic marking. Each layer is given statistical detail with regard to concatenability. Finally, individual subsections are dedicated to the matters of: possessive declension compatibility in the distinction of sublexica; genitive and dative-case paradigmatic defectivity in the possessive declension, where it is demonstrated to be parametrically diverse, and secondary declension, a proposed typology modifiers without nouns , as compatible with adnominal person.

Use of Document Management Systems - a Case Study of the Finnish Construction Industry

Triggered by the very quick proliferation of Internet connectivity, electronic document management (EDM) systems are now rapidly being adopted for managing the documentation that is produced and exchanged in construction projects. Nevertheless there are still substantial barriers to the efficient use of such systems, mainly of a psychological nature and related to insufficient training. This paper presents the results of empirical studies carried out during 2002 concerning the current usage of EDM systems in the Finnish construction industry. The studies employed three different methods in order to provide a multifaceted view of the problem area, both on the industry and individual project level. In order to provide an accurate measurement of overall usage volume in the industry as a whole telephone interviews with key personnel from 100 randomly chosen construction projects were conducted. The interviews showed that while around 1/3 of big projects already have adopted the use of EDM, very few small projects have adopted this technology. The barriers to introduction were investigated through interviews with representatives for half a dozen of providers of systems and ASP-services. These interviews shed a lot of light on the dynamics of the market for this type of services and illustrated the diversity of business strategies adopted by vendors. In the final study log files from a project which had used an EDM system were analysed in order to determine usage patterns. The results illustrated that use is yet incomplete in coverage and that only a part of the individuals involved in the project used the system efficiently, either as information producers or consumers. The study also provided feedback on the usefulness of the log files.

Suunnittelunäkemys metsäorganisaatioissa ja sen vaikutus tietojärjestelmälle asetettaviin vaatimuksiin

Department of Forest Resource Management in the University of Helsinki has in years 2004?2007 carried out so-called SIMO -project to develop a new generation planning system for forest management. Project parties are organisations doing most of Finnish forest planning in government, industry and private owned forests. Aim of this study was to find out the needs and requirements for new forest planning system and to clarify how parties see targets and processes in today's forest planning. Representatives responsible for forest planning in each organisation were interviewed one by one. According to study the stand-based system for managing and treating forests continues in the future. Because of variable data acquisition methods with different accuracy and sources, and development of single tree interpretation, more and more forest data is collected without field work. The benefits of using more specific forest data also calls for use of information units smaller than tree stand. In Finland the traditional way to arrange forest planning computation is divided in two elements. After updating the forest data to present situation every stand unit's growth is simulated with different alternative treatment schedule. After simulation, optimisation selects for every stand one treatment schedule so that the management program satisfies the owner's goals in the best possible way. This arrangement will be maintained in the future system. The parties' requirements to add multi-criteria problem solving, group decision support methods as well as heuristic and spatial optimisation into system make the programming work more challenging. Generally the new system is expected to be adjustable and transparent. Strict documentation and free source code helps to bring these expectations into effect. Variable growing models and treatment schedules with different source information, accuracy, methods and the speed of processing are supposed to work easily in system. Also possibilities to calibrate models regionally and to set local parameters changing in time are required. In future the forest planning system will be integrated in comprehensive data management systems together with geographic, economic and work supervision information. This requires a modular method of implementing the system and the use of a simple data transmission interface between modules and together with other systems. No major differences in parties' view of the systems requirements were noticed in this study. Rather the interviews completed the full picture from slightly different angles. In organisation the forest management is considered quite inflexible and it only draws the strategic lines. It does not yet have a role in operative activity, although the need and benefits of team level forest planning are admitted. Demands and opportunities of variable forest data, new planning goals and development of information technology are known. Party organisations want to keep on track with development. One example is the engagement in extensive SIMO-project which connects the whole field of forest planning in Finland.

Effects of 17α-ethinyl estradiol on the mating system of the sand goby (Pomatoschistus minutus)

In aquatic environments, endocrine disrupting chemicals (EDCs) that interfere with the endocrinology of males and females form a threat to the maintenance of populations. EDCs are a diverse group of natural and manmade chemicals that already at very low concentrations (at nanogram levels) can have severe effects on reproduction by individuals, e.g. complete sex reversal, feminisation of males, impaired reproduction even resulting in near extinction of populations. With regard to fish, despite the extensive literature on physiological effects of EDCs, very little is known about potential population-level effects. In this thesis, I examined how 17α-ethinyl estradiol (EE2), a synthetic estrogen used in oral contraceptive pills, affects the reproductive behaviour of a marine fish, the sand goby (Pomatoschistus minutus). The aims were fourfold. First, I investigated how exposure to EE2 affects courtship and parental care of sand goby males. Secondly, I looked at effects on the mating system and sexual selection. In the third study, I observed the effects of exposure in a social context where exposed males had to compete with non-exposed males for resources and mates. Finally, I studied the effects of exposure on male-male competition and male aggressive behaviour. This work revealed that EE2 exposure impairs the ability of males to acquire and defend a nest, as well as diminishes the attractiveness of males to females by decreasing their courtship and aggressive behaviour. These effects are harmful for a male whose reproductive success is determined by the ability to compete for limited resources and to attract mates. Furthermore, this thesis showed that selection on male size was relaxed after EE2 exposure and male size had a smaller effect on mating success. These effects can be of a profound nature as they interfere with sexual selection, and may in the long run lead to the loss of traits maintained through sexual selection. The thesis shows that an exposure to environmentally relevant levels of EE2 clearly reduces the chances of individuals to reproduce successfully. Furthermore, it strongly suggests that several types of biomarkers should be used to detect and assess the effects of EDC exposure because severe behavioural effects can sometimes be seen before effects are detectable at the molecular or morphometric level. Behavioural assays should be considered an important complementary tool for the standard ecotoxicological assays because observed behavioural changes have direct and negative effects on fitness, while the connection between changes in molecular expression and fitness may be less obvious.

Type III Secretion System of Phytopathogenic Bacterium Pseudomonas syringae:From Gene to Function

The type III secretion system (T3SS) is an essential requirement for the virulence of many Gram-negative bacteria which infect plants, animals and men. Pathogens use the T3SS to deliver effector proteins from the bacterial cytoplasm to the eukaryotic host cells, where the effectors subvert host defenses. The best candidates for directing effector protein traffic are the bacterial type III-associated appendages, called needles or pili. In plant pathogenic bacteria, the best characterized example of a T3SS-associated appendage is the HrpA pilus of the plant pathogen Pseudomonas syringae pv. tomato DC3000. The components of the T3SS in plant pathogens are encoded by a cluster of hrp (hypersensitive reaction and pathogenicity) genes. Two major classes of T3SS-secreted proteins are: harpin proteins such as HrpZ which are exported into extracellular space, and avirulence (Avr) proteins such as AvrPto which are translocated directly to the plant cytoplasm. This study deals with the structural and functional characterization of the T3SS-associated HrpA pilus and the T3SS-secreted harpins. By insertional mutagenesis analysis of HrpA, we located the optimal epitope insertion site in the amino-terminus of HrpA, and revealed the potential application of the HrpA pilus as a carrier of antigenic determinants for vaccination. By pulse-expression of proteins combined with immuno-electron microscopy, we discovered the Hrp pilus assembly strategy as addition of HrpA subunits to the distal end of the growing pilus, and we showed for the first time that secretion of HrpZ occurs at the tip of the pilus. The pilus thus functions as a conduit delivering proteins to the extracellular milieu. By using phage-display and scanning-insertion mutagenesis methods we identified a conserved HrpZ-binding peptide and localized the peptide-binding site to the central domain of HrpZ. We also found that the HrpZ specifically interacts with a host bean protein. Taken together, the current results provide deeper insight into the molecular mechanism of T3SS-associated pilus assembly and effector protein translocation, which will be helpful for further studies on the pathogenic mechanisms of Gram-negative bacteria and for developing new strategies to prevent bacterial infection.

Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.

The RATAS-project, in the Light of 25 Years of Development Towards Computer-Integrated Construction

In smaller countries where the key players in construction IT development tend to know each other personally and where public R&D funding is concentrated to a few channels, IT roadmaps and strategies would seem to have a better chance of influencing development than in the bigger industrial countries. In this paper Finland and the RATAS-project is presented as a historical case illustrating such impact. RATAS was initiated as a construction IT roadmap project in 1985, involving many of the key organisations and companies active in construction sector development. Several of the individuals who took an active part in the project have played an important role in later developments both in Finland and on the international scene. The central result of RATAS was the identification of what is nowadays called Building Information Modelling (BIM) technology as the central issue in getting IT into efficient use in the construction sector. BIM, which earlier was referred to as building product modelling, has been a key ingredient in many roadmaps since and the subject of international standardisation efforts such as STEP and IAI/IFCs. The RATAS project can in hindsight be seen as a forerunner with an impact which also transcended national borders.

The Scholarly Journal Re-engineered: A Case Study of an Open Access Journal in Construction IT

Open access is a new model for the publishing of scientific journals enabled by the Internet, in which the published articles are freely available for anyone to read. During the 1990’s hundreds of individual open access journals were founded by groups of academics, supported by grants and unpaid voluntary work. During the last five years other types of open access journals, funded by author charges have started to emerge and also established publishers have started to experiment with different variations of open access. This article reports on the experiences of one open access journal (The Electronic Journal of Information Technology in Construction, ITcon) over its ten year history. In addition to a straightforward account of the lessons learned the journal is also benchmarked against a number of competitors in the same research area and its development is put into the larger perspective of changes in scholarly publishing. The main findings are: That a journal publishing around 20-30 articles per year, equivalent to a typical quarterly journal, can sustainable be produced using an open source like production model. The journal outperforms its competitors in some respects, such as the speed of publication, availability of the results and balanced global distribution of authorship, and is on a par with them in most other respects. The key statistics for ITcon are: Acceptance rate 55 %. Average speed of publication 6-7 months. 801 subscribers to email alerts. Average number of downloads by human readers per paper per month 21.

How do Researchers Find and Retrieve Scientific Publications – A Case study of the Impact of the Internet on the Construction IT and Construction Management Research Communities

The World Wide Web provides the opportunity for a radically changed and much more efficient communication process for scientific results. A survey in the closely related domains of construction information technology and construction management was conducted in February 2000, aimed at measuring to what extent these opportunities are already changing the scientific information exchange and how researchers feel about the changes. The paper presents the results based on 236 replies to an extensive Web based questionnaire. 65% of the respondents stated their primary research interest as IT in A/E/C and 20% as construction management and economics. The questions dealt with how researchers find, access and read different sources; how much and what publications they read; how often and to which conferences they travel; how much they publish, and what are the criteria for where they eventually decide to publish. Some of the questions confronted traditional and electronic publishing with one final section dedicated to opinions about electronic publishing. According to the survey researchers already download half of the material that they read digitally from the Web. The most popular method for retrieving an interesting publication is downloading it for free from the author’s or publisher’s website. Researchers are not particularly willing to pay for electronic scientific publications. There is much support for a scenario of electronic journals available totally freely on the Web, where the costs could be covered by for instance professional societies or the publishing university. The shift that the Web is causing seems to be towards the "just in time" reading of literature. Also, frequent users of the Web rely less on scientific publications and tend to read fewer articles. If available with little effort, papers published in traditional journals are preferred; if not, the papers should be on the Web. In these circumstances, the role of paper-based journals published by established publishers is shifting from the core "information exchange" to the building of authors' prestige. The respondents feel they should build up their reputations by publishing in journals and relevant conferences, but then make their work freely available on the Web.

Determinants and Consequences of Information Sharing with Key Suppliers

As companies become more efficient with respect to their internal processes, they begin to shift the focus beyond their corporate boundaries. Thus, the recent years have witnessed an increased interest by practitioners and researchers in interorganizational collaboration, which promises better firm performance through more effective supply chain management. It is no coincidence that this interest comes in parallel with the recent advancements in Information and Communication Technologies, which offer many new collaboration possibilities for companies. However, collaboration, or any other type of supply chain integration effort, relies heavily on information sharing. Hence, this study focuses on information sharing, in particular on the factors that determine it and on its value. The empirical evidence from Finnish and Swedish companies suggests that uncertainty (both demand and environmental) and dependency in terms of switching costs and asset specific investments are significant determinants of information sharing. Results also indicate that information sharing improves company performance regarding resource usage, output, and flexibility. However, companies share information more intensely at the operational rather than the strategic level. The use of supply chain practices and technologies is substantial but varies across the two countries. This study sheds light on a common trend in supply chains today. Whereas the results confirm the value of information sharing, the contingent factors help to explain why the intensity of information shared across companies differ. In the future, competitive pressures and uncertainty are likely to intensify. Therefore, companies may want to continue with their integration efforts by focusing on the determinants discussed in this study. However, at the same time, the possibility of opportunistic behavior by the exchange partner cannot be disregarded.