Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

Accuracy of absorbed dose in external photon beam radiotherapy : what level is sufficient and how to approach it?

Radiation therapy (RT) plays currently significant role in curative treatments of several cancers. External beam RT is carried out mostly by using megavoltage beams of linear accelerators. Tumor eradication and normal tissue complications correlate to dose absorbed in tissues. Normally this dependence is steep and it is crucial that actual dose within patient accurately correspond to the planned dose. All factors in a RT procedure contain uncertainties requiring strict quality assurance. From hospital physicist´s point of a view, technical quality control (QC), dose calculations and methods for verification of correct treatment location are the most important subjects. Most important factor in technical QC is the verification that radiation production of an accelerator, called output, is within narrow acceptable limits. The output measurements are carried out according to a locally chosen dosimetric QC program defining measurement time interval and action levels. Dose calculation algorithms need to be configured for the accelerators by using measured beam data. The uncertainty of such data sets limits for best achievable calculation accuracy. All these dosimetric measurements require good experience, are workful, take up resources needed for treatments and are prone to several random and systematic sources of errors. Appropriate verification of treatment location is more important in intensity modulated radiation therapy (IMRT) than in conventional RT. This is due to steep dose gradients produced within or close to healthy tissues locating only a few millimetres from the targeted volume. The thesis was concentrated in investigation of the quality of dosimetric measurements, the efficacy of dosimetric QC programs, the verification of measured beam data and the effect of positional errors on the dose received by the major salivary glands in head and neck IMRT. A method was developed for the estimation of the effect of the use of different dosimetric QC programs on the overall uncertainty of dose. Data were provided to facilitate the choice of a sufficient QC program. The method takes into account local output stability and reproducibility of the dosimetric QC measurements. A method based on the model fitting of the results of the QC measurements was proposed for the estimation of both of these factors. The reduction of random measurement errors and optimization of QC procedure were also investigated. A method and suggestions were presented for these purposes. The accuracy of beam data was evaluated in Finnish RT centres. Sufficient accuracy level was estimated for the beam data. A method based on the use of reference beam data was developed for the QC of beam data. Dosimetric and geometric accuracy requirements were evaluated for head and neck IMRT when function of the major salivary glands is intended to be spared. These criteria are based on the dose response obtained for the glands. Random measurement errors could be reduced enabling lowering of action levels and prolongation of measurement time interval from 1 month to even 6 months simultaneously maintaining dose accuracy. The combined effect of the proposed methods, suggestions and criteria was found to facilitate the avoidance of maximal dose errors of up to even about 8 %. In addition, their use may make the strictest recommended overall dose accuracy level of 3 % (1SD) achievable.

Estramustine and its Derivatives in Potentiating Radiotherapy of Prostate Cancer

The purpose of this study was to deepen our knowledge of the combined use of estramustine and radiotherapy in the treatment of prostate cancer. Prostate cancer is a common disease, with a high variability between subjects in its malignant potential. In many cases, the disease is an incidental finding with little or no clinical significance. In other cases, however, prostate cancer may be an aggressive malignant disease, which, if the initial treatment fails, lacks an effective cure and may lead to severe symptoms, metastasis, and death despite all treatment. In many cases, the methods of treatment available at the moment provide cure or significant regression of symptoms, but often at the cost of considerable side effects. Estramustine, a cytostatic drug used for treating advanced cancer of the prostate, has been shown to inhibit prostate cancer progression and also to increase the sensitivity of cancer cells to radiotherapy. The goals of this study were, first, to find out whether it is possible to use either estramustine or an antibody against estramustine binding protein as carrier molecules for bringing therapeutic radioisotopes into prostate cancer cells, and, secondly, to gain more understanding of the mechanisms behind the known radiosensitising effect of estramustine. Estramustine and estramustine binding protein antibody were labelled with iodine-125 to study the biodistribution of these substances in mice. In the first experiment, both of the substances accumulated in the prostate, but radioiodinated estramustine also showed affinity to the liver and the lungs. Since the radiolabelled antibody was found out to accumulate more selectively to the prostate, we studied its biodistribution in nude mice with DU-145 human prostate cancer implants. In this experiment, the prostate and the tumour accumulated more radioactivity than other organs, but we concluded that the difference in the dose of radiation compared to other organs was not sufficient for the radioiodinated antibody to be advocated as a carrier molecule for treating prostate cancer. Mice with similar DU-145 prostate cancer implants were then treated with estramustine and external beam irradiation, with and without neoadjuvant estramustine treatment. The tumours responded to the treatment as expected, showing the radiation potentiating effect of estramustine. In the third experiment, this effect was found without an increase in the amount of apoptosis in the tumour cells, despite previous suggestions to the contrary. In the fourth experiment, we gave a similar treatment to the mice with DU-145 tumours. A reduction in proliferation was found in the groups treated with radiotherapy, and an increased amount of tumour hypoxia and tumour necrosis in the group treated with both neoadjuvant estramustine and radiation. This finding is contradictory to the suggestion that the radiation sensitising effect of estramustine could be attributed to its angiogenic activity.

The roughness and imaging characterisation of different pharmaceutical surfaces

The surface properties of solid state pharmaceutics are of critical importance. Processing modifies the surfaces and effects surface roughness, which influences the performance of the final dosage form in many different levels. Surface roughness has an effect on, e.g., the properties of powders, tablet compression and tablet coating. The overall goal of this research was to understand the surface structures of pharmaceutical surfaces. In this context the specific purpose was to compare four different analysing techniques (optical microscopy, scanning electron microscopy, laser profilometry and atomic force microscopy) in various pharmaceutical applications where the surfaces have quite different roughness scale. This was done by comparing the image and roughness analysing techniques using powder compacts, coated tablets and crystal surfaces as model surfaces. It was found that optical microscopy was still a very efficient technique, as it yielded information that SEM and AFM imaging are not able to provide. Roughness measurements complemented the image data and gave quantitative information about height differences. AFM roughness data represents the roughness of only a small part of the surface and therefore needs other methods like laser profilometer are needed to provide a larger scale description of the surface. The new developed roughness analysing method visualised surface roughness by giving detailed roughness maps, which showed local variations in surface roughness values. The method was able to provide a picture of the surface heterogeneity and the scale of the roughness. In the coating study, the laser profilometer results showed that the increase in surface roughness was largest during the first 30 minutes of coating when the surface was not yet fully covered with coating. The SEM images and the dispersive X-ray analysis results showed that the surface was fully covered with coating within 15 to 30 minutes. The combination of the different measurement techniques made it possible to follow the change of surface roughness and development of polymer coating. The optical imaging techniques gave a good overview of processes affecting the whole crystal surface, but they lacked the resolution to see small nanometer scale processes. AFM was used to visualize the nanoscale effects of cleaving and reveal the full surface heterogeneity, which underlies the optical imaging. Ethanol washing changed small (nanoscale) structure to some extent, but the effect of ethanol washing on the larger scale was small. Water washing caused total reformation of the surface structure at all levels.

Ultrasound-assisted surface engineering of pharmaceutical powders

Effective processing of powdered particles can facilitate powder handling and result in better drug product performance, which is of great importance in the pharmaceutical industry where the majority of active pharmaceutical ingredients (APIs) are delivered as solid dosage forms. The purpose of this work was to develop a new ultrasound-assisted method for particle surface modification and thin-coating of pharmaceutical powders. The ultrasound was used to produce an aqueous mist with or without a coating agent. By using the proposed technique, it was possible to decrease the interparticular interactions and improve rheological properties of poorly-flowing water-soluble powders by aqueous smoothing of the rough surfaces of irregular particles. In turn, hydrophilic polymer thin-coating of a hydrophobic substance diminished the triboelectrostatic charge transfer and improved the flowability of highly cohesive powder. To determine the coating efficiency of the technique, the bioactive molecule β-galactosidase was layered onto the surface of powdered lactose particles. Enzyme-treated materials were analysed by assaying the quantity of the reaction product generated during enzymatic cleavage of the milk sugar. A near-linear increase in the thickness of the drug layer was obtained during progressive treatment. Using the enzyme coating procedure, it was confirmed that the ultrasound-assisted technique is suitable for processing labile protein materials. In addition, this pre-treatment of milk sugar could be used to improve utilization of lactose-containing formulations for populations suffering from severe lactose intolerance. Furthermore, the applicability of the thin-coating technique for improving homogeneity of low-dose solid dosage forms was shown. The carrier particles coated with API gave rise to uniform distribution of the drug within the powder. The mixture remained homogeneous during further tabletting, whereas the reference physical powder mixture was subject to segregation. In conclusion, ultrasound-assisted surface engineering of pharmaceutical powders can be effective technology for improving formulation and performance of solid dosage forms such as dry powder inhalers (DPI) and direct compression products.

Understanding solid-state transformations during dehydration: new insights using vibrational spectroscopy and multivariate modelling

Many active pharmaceutical ingredients (APIs) have both anhydrate and hydrate forms. Due to the different physicochemical properties of solid forms, the changes in solid-state may result in therapeutic, pharmaceutical, legal and commercial problems. In order to obtain good solid dosage form quality and performance, there is a constant need to understand and control these phase transitions during manufacturing and storage. Thus it is important to detect and also quantify the possible transitions between the different forms. In recent years, vibrational spectroscopy has become an increasingly popular tool to characterise the solid-state forms and their phase transitions. It offers several advantages over other characterisation techniques including an ability to obtain molecular level information, minimal sample preparation, and the possibility of monitoring changes non-destructively in-line. Dehydration is the phase transition of hydrates which is frequently encountered during the dosage form production and storage. The aim of the present thesis was to investigate the dehydration behaviour of diverse pharmaceutical hydrates by near infrared (NIR), Raman and terahertz pulsed spectroscopic (TPS) monitoring together with multivariate data analysis. The goal was to reveal new perspectives for investigation of the dehydration at the molecular level. Solid-state transformations were monitored during dehydration of diverse hydrates on hot-stage. The results obtained from qualitative experiments were used to develop a method and perform the quantification of the solid-state forms during process induced dehydration in a fluidised bed dryer. Both in situ and in-line process monitoring and quantification was performed. This thesis demonstrated the utility of vibrational spectroscopy techniques and multivariate modelling to monitor and investigate dehydration behaviour in situ and during fluidised bed drying. All three spectroscopic methods proved complementary in the study of dehydration. NIR spectroscopy models could quantify the solid-state forms in the binary system, but were unable to quantify all the forms in the quaternary system. Raman spectroscopy models on the other hand could quantify all four solid-state forms that appeared upon isothermal dehydration. The speed of spectroscopic methods makes them applicable for monitoring dehydration and the quantification of multiple forms was performed during phase transition. Thus the solid-state structure information at the molecular level was directly obtained. TPS detected the intermolecular phonon modes and Raman spectroscopy detected mostly the changes in intramolecular vibrations. Both techniques revealed information about the crystal structure changes. NIR spectroscopy, on the other hand was more sensitive to water content and hydrogen bonding environment of water molecules. This study provides a basis for real time process monitoring using vibrational spectroscopy during pharmaceutical manufacturing.

Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

Adenoviral Gene Therapy for Advanced Head and Neck Cancer

Advanced stage head and neck cancers (HNC) with distant metastasis, as well as prostate cancers (PC), are devastating diseases currently lacking efficient treatment options. One promising developmental approach in cancer treatment is the use of oncolytic adenoviruses, especially in combination therapy with conventional cancer therapies. The safety of the approach has been tested in many clinical trials. However, antitumor efficacy needs to be improved in order to establish oncolytic viruses as a viable treatment alternative. To be able to test in vivo the effects on anti-tumor efficiency of a multimodal combination therapy of oncolytic adenoviruses with the standard therapeutic combination of radiotherapy, chemotherapy and Cetuximab monoclonal antibody (mAb), a xenograft HNC tumor model was developed. This model mimics the typical clinical situation as it is initially sensitive to cetuximab, but resistance develops eventually. Surprisingly, but in agreement with recent findings for chemotherapy and radiotherapy, a higher proportion of cells positive for HNC cancer stem cell markers were found in the tumors refractory to cetuximab. In vitro as well as in vivo results found in this study support the multimodal combination therapy of oncolytic adenoviruses with chemotherapy, radiotherapy and monoclonal antibody therapy to achieve increased anti-tumor efficiency and even complete tumor eradication with lower treatment doses required. In this study, it was found that capsid modified oncolytic viruses have increased gene transfer to cancer cells as well as an increased antitumor effect. In order to elucidate the mechanism of how oncolytic viruses promote radiosensitization of tumor cells in vivo, replicative deficient viruses expressing several promising radiosensitizing viral proteins were tested. The results of this study indicated that oncolytic adenoviruses promote radiosensitization by delaying the repair of DNA double strand breaks in tumor cells. Based on the promising data of the first study, two tumor double-targeted oncolytic adenoviruses armed with the fusion suicide gene FCU1 or with a fully human mAb specific for human Cytotoxic T Lymphocyte-Associated Antigen 4 (CTLA-4) were produced. FCU1 encodes a bifunctional fusion protein that efficiently catalyzes the direct conversion of 5-FC, a relatively nontoxic antifungal agent, into the toxic metabolites 5-fluorouracil and 5-fluorouridine monophosphate, bypassing the natural resistance of certain human tumor cells to 5-fluorouracil. Anti-CTLA4 mAb promotes direct killing of tumor cells via apoptosis and most importantly immune system activation against the tumors. These armed oncolytic viruses present increased anti-tumor efficacy both in vitro and in vivo. Furthermore, by taking advantage of the unique tumor targeted gene transfer of oncolytic adenoviruses, functional high tumor titers but low systemic concentrations of the armed proteins were generated. In addition, supernatants of tumor cells infected with Ad5/3-24aCTLA4, which contain anti-CTLA4 mAb, were able to effectively immunomodulate peripheral blood mononuclear cells (PBMC) of cancer patients with advanced tumors. -- In conclusion, the results presented in this thesis suggest that genetically engineered oncolytic adenoviruses have great potential in the treatment of advanced and metastatic HNC and PC.

Perspectives on prescribing in nursing homes in Helsinki

Prescribing for older patients is challenging. The prevalence of diseases increases with advancing age and causes extensive drug use. Impairments in cognitive, sensory, social and physical functioning, multimorbidity and comorbidities, as well as age-related changes in pharmacokinetics and pharmacodynamics all add to the complexity of prescribing. This study is a cross-sectional assessment of all long-term residents aged ≥ 65 years in all nursing homes in Helsinki, Finland. The residents’ health status was assessed and data on their demographic factors, health and medications were collected from their medical records in February 2003. This study assesses some essential issues in prescribing for older people: psychotropic drugs (Paper I), laxatives (Paper II), vitamin D and calcium supplements (Paper III), potentially inappropriate drugs for older adults (PIDs) and drug-drug interactions (DDIs)(Paper IV), as well as prescribing in public and private nursing homes. A resident was classified as a medication user if his or her medication record indicated a regular sequence for its dosage. Others were classified as non-users. Mini Nutritional Assessment (MNA) was used to assess residents’ nutritional status, Beers 2003 criteria to assess the use of PIDs, and the Swedish, Finnish, INteraction X-referencing database (SFINX) to evaluate their exposure to DDIs. Of all nursing home residents in Helsinki, 82% (n=1987) participated in studies I, II, and IV and 87% (n=2114) participated in the study III. The residents’ mean age was 84 years, 81% were female, and 70% were diagnosed with dementia. The mean number of drugs was 7.9 per resident; 40% of the residents used ≥ 9 drugs per day, and were thus exposed to polypharmacy. Eighty percent of the residents received psychotropics; 43% received antipsychotics, and 45% used antidepressants. Anxiolytics were prescribed to 26%, and hypnotics to 28% of the residents. Of those residents diagnosed with dementia, 11% received antidementia drugs. Fifty five percent of the residents used laxatives regularly. In multivariate analysis, those factors associated with regular laxative use were advanced age, immobility, poor nutritional status, chewing problems, Parkinson’s disease, and a high number of drugs. Eating snacks between meals was associated with lower risk for laxative use. Of all participants, 33% received vitamin D supplementation, 28% received calcium supplementation, and 20% received both vitamin D and calcium. The dosage of vitamin D was rather low: 21% received vitamin D 400 IU (10 µg) or more, and only 4% received 800 IU (20 µg) or more. In multivariate analysis, residents who received vitamin D supplementation enjoyed better nutritional status, ate snacks between meals, suffered no constipation, and received regular weight monitoring. Those residents receiving PIDs (34% of all residents) more often used psychotropic medication and were more often exposed to polypharmacy than residents receiving no PIDs. Residents receiving PIDs were less often diagnosed with dementia than were residents receiving no PIDs. The three most prevalent PIDs were short-acting benzodiazepine in greater dosages than recommended, hydroxyzine, and nitrofurantoin. These three drugs accounted for nearly 77% of all PID use. Of all residents, less than 5% were susceptible to a clinically significant DDI. The most common DDIs were related to the use of potassium-sparing diuretics, carbamazepine, and codeine. Residents exposed to potential DDIs were younger, had more often suffered a previous stroke, more often used psychotropics, and were more often exposed to PIDs and polypharmacy than were residents not exposed to DDIs. Residents in private nursing homes were less often exposed to polypharmacy than were residents in public nursing homes. Long-term residents in nursing homes in Helsinki use, on average, nearly eight drugs daily. The use of psychotropic drugs in our study was notably more common than in international studies. The prevalence of laxatives equaled other prior international studies. Regardless of the known benefit and recommendation of vitamin D supplementation for elderly residing mostly indoors, the proportion of nursing home residents receiving vitamin D and calcium was surprisingly low. The use of PIDs was common among nursing home residents. PIDs increased the likelihood of DDIs. However, DDIs did not seem a major concern among the nursing home population. Monitoring PIDs and potential drug interactions could improve the quality of prescribing.

VEGF-C/VEGFR-3 and PDGF-B/PDGFR-b pathways in embryonic lymphangiogenesis

The circulatory system comprises the blood vascular system and the lymphatic vascular system. These two systems function in parallel. Blood vessels form a closed system that delivers oxygen and nutrients to the tissues and removes waste products from the tissues, while lymphatic vessels are blind-ended tubes that collect extravasated fluid and cells from the tissues and return them back to blood circulation. Development of blood and lymphatic vascular systems occurs in series. Blood vessels are formed via vasculogenesis and angiogenesis whereas lymphatic vessels develop via lymphangiogenesis, after the blood vascular system is already functional. Members of the vascular endothelial growth factor (VEGF) family are regulators of both angiogenesis and lymphangiogenesis, while members of the platelet-derived growth factor (PDGF) family are major mitogens for pericytes and smooth muscle cells and regulate formation of blood vessels. Vascular endothelial growth factor C (VEGF-C) is the major lymphatic growth factor and signaling through its receptor vascular endothelial growth factor receptor 3 (VEGFR-3) is sufficient for lymphangiogenesis in adults. We studied the role of VEGF-C in embryonic lymphangiogenesis and showed that VEGF-C is absolutely required for the formation of lymph sacs from embryonic veins. VEGFR-3 is also required for normal development of the blood vascular system during embryogenesis, as Vegfr3 knockout mice die at mid-gestation due to failure in remodeling of the blood vessels. We showed that sufficient VEGFR-3 signaling in the embryo proper is required for embryonic angiogenesis and in a dosage-sensitive manner for embryonic lymphangiogenesis. Importantly, mice deficient in both VEGFR-3 ligands, Vegfc and Vegfd, developed a normal blood vasculature, suggesting VEGF-C- and VEGF-D- independent functions for VEGFR-3 in the early embryo. Platelet-derived growth factor B (PDGF-B) signals via PDGFR-b and regulates formation of blood vessels by recruiting pericytes and smooth muscle cells around nascent endothelial tubes. We showed that PDGF-B fails to induce lymphangiogenesis when overexpressed in adult mouse skin using adenoviral vectors. However, mouse embryos lacking Pdgfb showed abnormal lymphatic vessels, suggesting that PDGF-B plays a role in lymphatic vessel maturation and separation from blood vessels during embryogenesis. Lymphatic vessels play a key role in immune surveillance, fat absorption and maintenance of fluid homeostasis in the body. However, lymphatic vessels are also involved in various diseases, such as lymphedema and tumor metastasis. These studies elucidate the basic mechanisms of embryonic lymphangiogenesis and add to the knowledge of lymphedema and tumor metastasis treatments by giving novel insights into how lymphatic vessel growth could be induced (in lymphedema) or inhibited (in tumor metastasis).

Protein cross-linking with oxidative enzymes and transglutaminase : Effects in meat protein systems

The effects of tyrosinase, laccase and transglutaminase (TG) were studied in different meat protein systems. The study was focused on the effects of the enzymes on the gel formation properties of myofibrils, and on the textural and water-holding properties of the heated meat systems. The cross-linking efficiency of a novel Trichoderma reesei tyrosinase was compared to that of the commercial Agaricus bisporus tyrosinase. Trichoderma tyrosinase was found to be superior compared to the Agaricus enzyme in its protein cross-linking efficiency and in the incorporation of a small molecule into a complex proteinaceous substrate. Tyrosinase, laccase and TG all polymerised myofibrillar proteins, but laccase was also found to cause protein fragmentation. A positive connection between covalent cross-link and gel formation was observed with tyrosinase and TG. Laccase was able to increase the gel formation only slightly. With an excessive laccase dosage the gel formation declined due to protein fragmentation. Tyrosinase, laccase and TG had different effects on the texture and water-holding of the heated chicken breast meat homogenates. Tyrosinase improved the firmness of the homogenate gels free of phosphate and with a low amount of meat. TG improved the firmness of all studied homogenates. Laccase weakened the gel firmness of the low-meat, low-salt and low-salt/phosphate homogenates and maintained the firmness on the control level in the homogenate free of phosphate. Tyrosinase was the only enzyme capable of reducing the weight loss in the homogenates containing a low amount of meat and a low amount of NaCl. TG was the only enzyme that could positively affect the firmness of the homogenate gel containing both low NaCl and phosphate amounts. In pilot scale the test products were made of coarsely ground chicken breast fillet with a moderate amount of salt. Increasining the amount of meat, salt and TG contents favoured the development of firmness of the test products. The evaporation loss decreased slightly along with increasing TG and NaCl amounts in the experimental conditions used, indicating a positive interaction between these two factors. In this work it was shown that tyrosinase, laccase and TG affected the same myofibrillar proteins, i.e. myosin and troponin T. However, these enzymes had distinguishable effects on the gel formation of a myofibril system as well as on the textural and water-holding properties of the finely ground meat homogenates, reflecting distinctions at least in the reaction mechanisms and target amino acid availability in the protein substrates for these enzymes.

Pharmacokinetic interactions of pioglitazone

Pioglitazone is a thiazolidinedione compound used in the treatment of type 2 diabetes. It has been reported to be metabolised by multiple cytochrome P450 (CYP) enzymes, including CYP2C8, CYP2C9 and CYP3A4 in vitro. The aims of this work were to identify the CYP enzymes mainly responsible for the elimination of pioglitazone in order to evaluate its potential for in vivo drug interactions, and to investigate the effects of CYP2C8- and CYP3A4-inhibiting drugs (gemfibrozil, montelukast, zafirlukast and itraconazole) on the pharmacokinetics of pioglitazone in healthy volunteers. In addition, the effect of induction of CYP enzymes on the pharmacokinetics of pioglitazone in healthy volunteers was investigated, with rifampicin as a model inducer. Finally, the effect of pioglitazone on CYP2C8 and CYP3A enzyme activity was examined in healthy volunteers using repaglinide as a model substrate. Study I was conducted in vitro using pooled human liver microsomes (HLM) and human recombinant CYP isoforms. Studies II to V were randomised, placebo-controlled cross-over studies with 2-4 phases each. A total of 10-12 healthy volunteers participated in each study. Pretreatment with clinically relevant doses with the inhibitor or inducer was followed by a single dose of pioglitazone or repaglinide, whereafter blood and urine samples were collected for the determination of drug concentrations. In vitro, the elimination of pioglitazone (1 µM) by HLM was markedly inhibited, in particular by CYP2C8 inhibitors, but also by CYP3A4 inhibitors. Of the recombinant CYP isoforms, CYP2C8 metabolised pioglitazone markedly, and CYP3A4 also had a significant effect. All of the tested CYP2C8 inhibitors (montelukast, zafirlukast, trimethoprim and gemfibrozil) concentration-dependently inhibited pioglitazone metabolism in HLM. In humans, gemfibrozil raised the area under the plasma concentration-time curve (AUC) of pioglitazone 3.2-fold (P < 0.001) and prolonged its elimination half-life (t½) from 8.3 to 22.7 hours (P < 0.001), but had no significant effect on its peak concentration (Cmax) compared with placebo. Gemfibrozil also increased the excretion of pioglitazone into urine and reduced the ratios of the active metabolites M-IV and M-III to pioglitazone in plasma and urine. Itraconazole had no significant effect on the pharmacokinetics of pioglitazone and did not alter the effect of gemfibrozil on pioglitazone pharmacokinetics. Rifampicin decreased the AUC of pioglitazone by 54% (P < 0.001) and shortened its dominant t½ from 4.9 to 2.3 hours (P < 0.001). No significant effect on Cmax was observed. Rifampicin also decreased the AUC of the metabolites M-IV and M-III, shortened their t½ and increased the ratios of the metabolite to pioglitazone in plasma and urine. Montelukast and zafirlukast did not affect the pharmacokinetics of pioglitazone. The pharmacokinetics of repaglinide remained unaffected by pioglitazone. These studies demonstrate the principal role of CYP2C8 in the metabolism of pioglitazone in humans. Gemfibrozil, an inhibitor of CYP2C8, increases and rifampicin, an inducer of CYP2C8 and other CYP enzymes, decreases the plasma concentrations of pioglitazone, which can necessitate blood glucose monitoring and adjustment of pioglitazone dosage. Montelukast and zafirlukast had no effects on the pharmacokinetics of pioglitazone, indicating that their inhibitory effect on CYP2C8 is negligible in vivo. Pioglitazone did not increase the plasma concentrations of repaglinide, indicating that its inhibitory effect on CYP2C8 and CYP3A4 is very weak in vivo.

Pharmacokinetic interactions affecting the antidiabetic repaglinide

Introduction Repaglinide is a short-acting drug, used to reduce postprandial hyperglycaemia in type 2 diabetic patients. Repaglinide is extensively metabolised, and its oral bioavailability is about 60%; its metabolites are mainly excreted into bile. In previous studies, the cytochrome P450 (CYP) 3A4 inhibitors itraconazole and clarithromycin have moderately increased the area under the concentration-time curve (AUC) of repaglinide. Gemfibrozil, a CYP2C8 inhibitor, has greatly increased repaglinide AUC, enhancing and prolonging its blood glucose-lowering effect. Rifampicin has decreased the AUC and effects of repaglinide. Aims The aims of this work were to investigate the contribution of CYP2C8 and CYP3A4 to the metabolism of repaglinide, and to study other potential drug interactions affecting the pharmacokinetics of repaglinide, and the mechanisms of observed interactions. Methods The metabolism of repaglinide was studied in vitro using recombinant human CYP enzymes and pooled human liver microsomes (HLM). The effect of trimethoprim, cyclosporine, bezafibrate, fenofibrate, gemfibrozil, and rifampicin on the metabolism of repaglinide, and the effect of fibrates and rifampicin on the activity of CYP2C8 and CYP3A4 were investigated in vitro. Randomised, placebo-controlled cross-over studies were carried out in healthy human volunteers to investigate the effect of bezafibrate, fenofibrate, trimethoprim, cyclosporine, telithromycin, montelukast and pioglitazone on the pharmacokinetics and pharmacodynamics of repaglinide. Pretreatment with clinically relevant doses of the study drug or placebo was followed by a single dose of repaglinide, after which blood and urine samples were collected to determine pharmacokinetic and pharmacodynamic parameters. Results In vitro, the contribution of CYP2C8 was similar to that of CYP3A4 in the metabolism of repaglinide (< 2 μM). Bezafibrate, fenofibrate, gemfibrozil, and rifampicin moderately inhibited CYP2C8 and repaglinide metabolism, but only rifampicin inhibited CYP3A4 in vitro. Bezafibrate, fenofibrate, montelukast, and pioglitazone had no effect on the pharmacokinetics and pharmacodynamics of repaglinide in vivo. The CYP2C8 inhibitor trimethoprim inhibited repaglinide metabolism by HLM in vitro and increased repaglinide AUC by 61% in vivo (P < .001). The CYP3A4 inhibitor telithromycin increased repaglinide AUC 1.8-fold (P < .001) and enhanced its blood glucose-lowering effect in vivo. Cyclosporine inhibited the CYP3A4-mediated (but not CYP2C8-mediated) metabolism of repaglinide in vitro and increased repaglinide AUC 2.4-fold in vivo (P < .001). The effect of cyclosporine on repaglinide AUC in vivo correlated with the SLCO1B1 (encoding organic anion transporting polypeptide 1, OATP1B1) genotype. Conclusions The relative contributions of CYP2C8 and CYP3A4 to the metabolism of repaglinide are similar in vitro, when therapeutic repaglinide concentrations are used. In vivo, repaglinide AUC was considerably increased by inhibition of both CYP2C8 (by trimethoprim) and CYP3A4 (by telithromycin). Cyclosporine raised repaglinide AUC even higher, probably by inhibiting the CYP3A4-mediated biotransformation and OATP1B1-mediated hepatic uptake of repaglinide. Bezafibrate, fenofibrate, montelukast, and pioglitazone had no effect on the pharmacokinetics of repaglinide, suggesting that they do not significantly inhibit CYP2C8 or CYP3A4 in vivo. Coadministration of drugs that inhibit CYP2C8, CYP3A4 or OATP1B1 may increase the plasma concentrations and blood glucose-lowering effect of repaglinide, requiring closer monitoring of blood glucose concentrations to avoid hypoglycaemia, and adjustment of repaglinide dosage as necessary.