Crystallization as a Tool for Controlling and Designing Properties of Pharmaceutical Solids

The ability to deliver the drug to the patient in a safe, efficacious and cost-effective manner depends largely on the physicochemical properties of the active pharmaceutical ingredient (API) in the solid state. In this context, crystallization is of critical importance in pharmaceutical industry, as it defines physical and powder properties of crystalline APIs. An improved knowledge of the various aspects of crystallization process is therefore needed. The overall goal of this thesis was to gain better understanding of the relationships between crystallization, solid-state form and properties of pharmaceutical solids with a focus on a crystal engineering approach to design technological properties of APIs. Specifically, solid-state properties of the crystalline forms of the model APIs, erythromycin A and baclofen, and the influence of solvent on their crystallization behavior were investigated. In addition, the physical phenomena associated with wet granulation and hot-melting processing of the model APIs were examined at the molecular level. Finally, the effect of crystal habit modification of a model API on its tabletting properties was evaluated. The thesis enabled the understanding of the relationship between the crystalline forms of the model APIs, which is of practical importance for solid-state control during processing and storage. Moreover, a new crystalline form, baclofen monohydrate, was discovered and characterized. Upon polymorph screening, erythromycin A demonstrated high solvate-forming propensity thus emphasizing the need for careful control of the solvent effects during formulation. The solvent compositions that yield the desirable crystalline form of erythromycin A were defined. Furthermore, new examples on solvent-mediated phase transformations taking place during wet granulation of baclofen and hot-melt processing of erythromycin A dihydrate with PEG 6000 are reported. Since solvent-mediated phase transformations involve the crystallization of a stable phase and hence affect the dissolution kinetics and possibly absorption of the API these transformations must be well documented. Finally, a controlled-crystallization method utilizing HPMC as a crystal habit modifier was developed for erythromycin A dihydrate. The crystals with modified habit were shown to posses improved compaction properties as compared with those of unmodified crystals. This result supports the idea of morphological crystal engineering as a tool for designing technological properties of APIs and is of utmost practical interest.

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

The Art of Sympathy : Forms of Moral and Emotional Persuasion in Fiction

"The Art of Sympathy: Forms of Moral and Emotional Persuasion" in Fiction is an interdisciplinary study that looks closely at the ways that stories evoke sympathy, and the significance of this emotion for the development of moral attitudes and awareness. By linking readers' emotional responses to fiction with the potential impact of such responses on "the moral imagination," the study builds on empirical research conducted by literary scholars and psychologists into the emotional effects of reading fiction, as well as social psychological research into the connections between empathy/sympathy and moral development. I first investigate the dynamics of readers beliefs regarding characters in fictional narratives, and the nature of the emotions that they may experience as a result of those beliefs. The analysis demonstrates that there are important similarities between real emotions and emotions generated by fiction. Recognizing these similarities, I claim, can help us to conceptualize the nature of sympathetic responses to fictional characters. Building on these assertions, I then draw on research from social psychology and philosophy to develop a comprehensive definition of sympathy and to clarify the ways in which sympathy operates, both in people s daily lives and in readers sympathetic responses to fictional characters. Having established this definition and delineated its practical implications, I then examine how particular stories, through a variety of narrative techniques, persuade readers to feel sympathy for characters who are unsympathetic in certain ways. In order to verify my claims about the impact of these stories on readers emotions, I also review the results of tests that I conducted with nearly 200 adolescent readers. Through these tests, which were constructed and scored according to methods prevalent in social psychological research, it was determined that a majority of readers felt sympathy for the protagonists in two of the stories included in the study. These results were combined with data from an additional test, a standard measure of empathy and sympathy in the field of social psychology. The cross-tabulation of these results suggests that there was not a strong connection between readers responses and their general tendencies to feel sympathy for others. This finding would appear to support my hypotheses regarding the sympathetic persuasiveness of the stories in question. In light of these results, finally, I consider the potential contribution that fiction can make to adolescent emotional and moral development and the implications of that potential for future language arts curricula in the schools. In particular, I suggest the pedagogical importance of providing adolescents with opportunities to engage with the lives of fictional characters, and especially to experience feelings of sympathy for individuals towards whom they ordinarily might feel aversion.

Self-love and self-liking in the moral and political philosophy of Bernard Mandeville and David Hume

This work offers a novel interpretation of David Hume’s (1711–1776) conception of the conjectural development of civil society and artificial moral institutions. It focuses on the social elements of Hume’s Treatise of human nature (1739–40) and the necessary connection between science of man and politeness, civilised monarchies, social distance and hierarchical structure of civil society. The study incorporates aspects of intellectual history, history of philosophy and book history. In order to understand David Hume’s thinking, the intellectual development of Bernard Mandeville (1670–1733) needs to be accounted for. When put into a historical perspective, the moral, political and social components of Treatise of human nature can be read in the context of a philosophical tradition, in which Mandeville plays a pivotal role. A distinctive character of Mandeville and Hume’s account of human nature and moral institutions was the introduction of a simple distinction between self-love and self-liking. The symmetric passions of self-interest and pride can only be controlled by the corresponding moral institutions. This is also the way in which we can say that moral institutions are drawn from human nature. In the case of self-love or self-interest, the corresponding moral institution is justice. Respectively, concerning self-liking or pride the moral institution is politeness. There is an explicit analogy between these moral institutions. If we do not understand this analogy, we do not understand the nature of either justice or politeness. The present work is divided into two parts. In the first part, ‘Intellectual development of Bernard Mandeville’, it is argued that the relevance of the paradigmatic change in Mandeville’s thinking has been missed. It draws a picture of Mandeville turning from the Hobbism of The Fable of the Bees to an original theory of civil society put forward in his later works. In order to make this change more apparent, Mandeville’s career and the publishing history of The Fable of the Bees are examined comprehensively. This interpretation, based partly on previously unknown sources, challenges F. B. Kaye’s influential decision to publish the two parts of The Fable of the Bees as a uniform work of two volumes. The main relevance, however, of the ‘Intellectual development of Mandeville’ is to function as the context for the young Hume. The second part of the work, ‘David Hume and Greatness of mind’, explores in philosophical detail the social theory of the Treatise and politics and the science of man in his Essays. This part will also reveal the relevance of Greatness of mind as a general concept for David Hume’s moral and political philosophy.

A Literary Turn : Rethinking the Roles of Generalization and Theory in Anglo-American Moral Philosophy

This work investigates the role of narrative literature in late-20th century and contemporary Anglo-American moral philosophy. It aims to show the trend of reading narrative literature for purposes of moral philosophy from the 1970 s and early 80 s to the present day as a part of a larger movement in Anglo-American moral philosophy, and to present a view of its significance for moral philosophy overall. Chapter 1 provides some preliminaries concerning the view of narrative literature which my discussion builds on. In chapter 2 I give an outline of how narrative literature is considered in contemporary Anglo-American moral philosophy, and connect this use to the broad trend of neo-Aristotelian ethics in this context. In chapter 3 I connect the use of literature to the idea of the non-generalizability of moral perception and judgment, which is central to the neo-Aristotelian trend, as well as to a range of moral particularisms and anti-theoretical positions of late 20th century and contemporary ethics. The joint task of chapters 2 and 3 is to situate the trend of reading narrative literature for the purposes of moral philosophy in the present context of moral philosophy. In the following two chapters, 4 and 5, I move on from the particularizing power of narrative literature, which is emphasized by neo-Aristotelians and particularists alike, to a broader under-standing of the intellectual potential of narrative literature. In chapter 4 I argue that narrative literature has its own forms of generalization which are enriching for our understanding of the workings of ethical generalizations in philosophy. In chapter 5 I discuss Iris Murdoch s and Martha Nussbaum s respective ways of combining ethical generality and particularity in a philosophical framework where both systematic moral theory and narrative literature are taken seriously. In chapter 6 I analyse the controversy between contemporary anti-theoretical conceptions of ethics and Nussbaum s refutation of these. I present my suggestion for how the significance of the ethics/literature discussion for moral philosophy can be understood if one wants to overcome the limitations of both Nussbaum s theory-centred, equilibrium-seeking perspective, and the anti-theorists repudiation of theory. I call my position the inclusive approach .

Representing the epistemic nature of teachers’ practical knowledge : The case of class teachers’ general pedagogy

The present study addressed the epistemology of teachers’ practical knowledge. Drawing from the literature, teachers’ practical knowledge is defined as all teachers’ cognitions (e.g., beliefs, values, motives, procedural knowing, and declarative knowledge) that guide their practice of teaching. The teachers’ reasoning that lies behind their practical knowledge is addressed to gain insight into its epistemic nature. I studied six class teachers’ practical knowledge; they teach in the metropolitan region of Helsinki. Relying on the assumptions of the phenomenographic inquiry, I collected and analyzed the data. I analyzed the data in two stages where the first stage involved an abductive procedure, and the second stage an inductive procedure for interpretation, and thus developed the system of categories. In the end, a quantitative analysis nested into the qualitative findings to study the patterns of the teachers’’ reasoning. The results indicated that teachers justified their practical knowledge based on morality and efficiency of action; efficiency of action was found to be presented in two different ways: authentic efficiency and naïve efficiency. The epistemic weight of morality was embedded in what I call “moral care”. The core intention of teachers in the moral care was the commitment that they felt about the “whole character” of students. From this perspective the “dignity” and the moral character of the students should not replaced for any other “instrumental price”. “Caring pedagogy” was the epistemic value of teachers’ reasoning in the authentic efficiency. The central idea in the caring pedagogy was teachers’ intentions to improve the “intellectual properties” of “all or most” of the students using “flexible” and “diverse” pedagogies. However, “regulating pedagogy” was the epistemic condition of practice in the cases corresponding to naïve efficiency. Teachers argued that an effective practical knowledge should regulate and manage the classroom activities, but the targets of the practical knowledge were mainly other “issues “or a certain percentage of the students. In these cases, the teachers’ arguments were mainly based on the notion of “what worked” regardless of reflecting on “what did not work”. Drawing from the theoretical background and the data, teachers’ practical knowledge calls for “praxial knowledge” when they used the epistemic conditions of “caring pedagogy” and “moral care”. It however calls for “practicable” epistemic status when teachers use the epistemic condition of regulating pedagogy. As such, praxial knowledge with the dimensions of caring pedagogy and moral care represents the “normative” perspective on teachers’ practical knowledge, and thus reflects a higher epistemic status in comparison to “practicable” knowledge, which represents a “descriptive” perception toward teachers’ practical knowledge and teaching.

Studies on the pro-oxidative properties and neurotoxic potential of Angeli's salt-derived nitroxyl (HNO/NO-)

The biological function of nitric oxide and its oxidized forms has received a great deal of attention over the past two decades. However much less attention has been focused on the reduced nitric oxide, nitroxyl (HNO). Unlike NO, HNO is highly reactive species and thus it needs to be generated by using donor compounds under experimental conditions. Currently there is only one donor available, Angeli s salt, which releases HNO in a controlled fashion under pysiological conditions. Prior studies have shown the pro-oxidative and cytotoxic potential of Angeli s salt compared to NO donors. The high reactivity of HNO with cysteine thiols is considered to form the biochemical basis for its unique properties compared to other nitrogen oxides. Such thiol modification cold result in disturbances of vital cellular functions and subsequently to death of disturbance sensitive cells, such as neurons. Therefore modification of proteins and lipids was studied in vitro and the potential neurotoxicity was studied in vivo by local infusion of Angeli s salt into the rat central nervous system. The results show that under aerobic in vitro conditions, HNO can, subsequent to autoxidation, cause irreversible oxidative modification of proteins and lipids. These effects are not however seen in cell culture or following infusion of Angeli s salt directly into the rat central nervous tissue likely due to presence of lower oxygen and higher thiol concentration. However, due to high reactivity with thiols, HNO can cause irreversible inactivation of cysteine modification sensitive enzymes such as cysteine proteases papain in vitro and cathepsin B in cell culture. Furthermore it was shown that infusion of HNO releasing Angeli s salt into the rat central nervous system causes necrotic cell death and motor dysfunction following infusion into the lumbal intrathecal space. In conclusion, the acute neurotoxic potential of Angeli s salt was shown to be relatively low, but still higher compared to NO donors. HNO was shown to affect numerous cellular processes which could result in neurotoxicity if HNO was produced in vivo.

The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

The effects of thinning and fertilisation on wood and tracheid properties of Norway spruce (Picea abies) the results of long-term experiments

The aim of this thesis was to study the basic relationships between thinning and fertilisation, tree growth rate and wood properties of Norway spruce (Picea abies (L.) Karst.) throughout a stand rotation. The material consisted of a total of 109 trees from both long-term thinning (Heinola, 61°10'N, 26°01'E; Punkaharju, 61°49'N, 29°19'E) and fertilisation-thinning experiments (Parikkala, 61°36'N, 29°22'E; Suonenjoki, 62°45'N, 27°00'E) in Finland. Wood properties, i.e., radial increment, wood density, latewood proportion, tracheid length, cell wall thickness and lumen diameter, as well as relative lignin content, were measured in detail from the pith to the bark, as well as from the stem base towards the stem apex. Intensive thinning and fertilisation treatments of Norway spruce stands increased (8% 64%) the radial increment of studied trees at breast height (1.3 m). At the same time, a faster growth rate slightly decreased average wood density (2% 7%), tracheid length (0% 9%) and cell wall thickness (1% 17%). The faster growth resulted in only small changes (0% 9%) in lumen diameter and relative lignin content (1% 2%; lignin content was 25.4% 26%). However, the random variation in wood properties was large both between and within trees and annual rings. The results of this thesis indicate that the prevailing thinning and fertilisation treatments of Norway spruce stands in Fennoscandia may significantly enhance the radial increment of individual trees, and cause only small or no detrimental changes in wood and tracheid properties.

Soil hydrological properties and conditions, site preparation, and the long-term performance of planted Scots pine (Pinus sylvestris L.) on upland forest sites in Finnish Lapland

Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) forests dominate in Finnish Lapland. The need to study the effect of both soil factors and site preparation on the performance of planted Scots pine has increased due to the problems encountered in reforestation, especially on mesic and moist, formerly spruce-dominated sites. The present thesis examines soil hydrological properties and conditions, and effect of site preparation on them on 10 pine- and 10 spruce-dominated upland forest sites. Finally, the effects of both the site preparation and reforestation methods, and soil hydrology on the long-term performance of planted Scots pine are summarized. The results showed that pine and spruce sites differ significantly in their soil physical properties. Under field capacity or wetter soil moisture conditions, planted pines presumably suffer from excessive soil water and poor soil aeration on most of the originally spruce sites, but not on the pine sites. The results also suggested that site preparation affects the soil-water regime and thus prerequisites for forest growth over two decades after site preparation. High variation in the survival and mean height of planted pine was found. The study suggested that on spruce sites, pine survival is the lowest on sites that dry out slowly after rainfall events, and that height growth is the fastest on soils that reach favourable aeration conditions for root growth soon after saturation, and/or where the average air-filled porosity near field capacity is large enough for good root growth. Survival, but not mean height can be enhanced by employing intensive site preparation methods on spruce sites. On coarser-textured pine sites, site preparation methods don t affect survival, but methods affecting soil fertility, such as prescribed burning and ploughing, seem to enhance the height growth of planted Scots pines over several decades. The use of soil water content in situ as the sole criterion for sites suitable for pine reforestation was tested and found to be a relatively uncertain parameter. The thesis identified new potential soil variables, which should be tested using other data in the future.