Inventory Routing - A Strategic Management Accounting Perspective

This dissertation develops a strategic management accounting perspective of inventory routing. The thesis studies the drivers of cost efficiency gains by identifying the role of the underlying cost structure, demand, information sharing, forecasting accuracy, service levels, vehicle fleet, planning horizon and other strategic factors as well as the interaction effects among these factors with respect to performance outcomes. The task is to enhance the knowledge of the strategic situations that favor the implementation of inventory routing systems, understanding cause-and-effect relationships, linkages and gaining a holistic view of the value proposition of inventory routing. The thesis applies an exploratory case study design, which is based on normative quantitative empirical research using optimization, simulation and factor analysis. Data and results are drawn from a real world application to cash supply chains. The first research paper shows that performance gains require a common cost component and cannot be explained by simple linear or affine cost structures. Inventory management and distribution decisions become separable in the absence of a set-dependent cost structure, and neither economies of scope nor coordination problems are present in this case. The second research paper analyzes whether information sharing improves the overall forecasting accuracy. Analysis suggests that the potential for information sharing is limited to coordination of replenishments and that central information do not yield more accurate forecasts based on joint forecasting. The third research paper develops a novel formulation of the stochastic inventory routing model that accounts for minimal service levels and forecasting accuracy. The developed model allows studying the interaction of minimal service levels and forecasting accuracy with the underlying cost structure in inventory routing. Interestingly, results show that the factors minimal service level and forecasting accuracy are not statistically significant, and subsequently not relevant for the strategic decision problem to introduce inventory routing, or in other words, to effectively internalize inventory management and distribution decisions at the supplier. Consequently the main contribution of this thesis is the result that cost benefits of inventory routing are derived from the joint decision model that accounts for the underlying set-dependent cost structure rather than the level of information sharing. This result suggests that the value of information sharing of demand and inventory data is likely to be overstated in prior literature. In other words, cost benefits of inventory routing are primarily determined by the cost structure (i.e. level of fixed costs and transportation costs) rather than the level of information sharing, joint forecasting, forecasting accuracy or service levels.

Middleware for Mobile Sensing Applications in Urban Environments

Sensor networks represent an attractive tool to observe the physical world. Networks of tiny sensors can be used to detect a fire in a forest, to monitor the level of pollution in a river, or to check on the structural integrity of a bridge. Application-specific deployments of static-sensor networks have been widely investigated. Commonly, these networks involve a centralized data-collection point and no sharing of data outside the organization that owns it. Although this approach can accommodate many application scenarios, it significantly deviates from the pervasive computing vision of ubiquitous sensing where user applications seamlessly access anytime, anywhere data produced by sensors embedded in the surroundings. With the ubiquity and ever-increasing capabilities of mobile devices, urban environments can help give substance to the ubiquitous sensing vision through Urbanets, spontaneously created urban networks. Urbanets consist of mobile multi-sensor devices, such as smart phones and vehicular systems, public sensor networks deployed by municipalities, and individual sensors incorporated in buildings, roads, or daily artifacts. My thesis is that "multi-sensor mobile devices can be successfully programmed to become the underpinning elements of an open, infrastructure-less, distributed sensing platform that can bring sensor data out of their traditional close-loop networks into everyday urban applications". Urbanets can support a variety of services ranging from emergency and surveillance to tourist guidance and entertainment. For instance, cars can be used to provide traffic information services to alert drivers to upcoming traffic jams, and phones to provide shopping recommender services to inform users of special offers at the mall. Urbanets cannot be programmed using traditional distributed computing models, which assume underlying networks with functionally homogeneous nodes, stable configurations, and known delays. Conversely, Urbanets have functionally heterogeneous nodes, volatile configurations, and unknown delays. Instead, solutions developed for sensor networks and mobile ad hoc networks can be leveraged to provide novel architectures that address Urbanet-specific requirements, while providing useful abstractions that hide the network complexity from the programmer. This dissertation presents two middleware architectures that can support mobile sensing applications in Urbanets. Contory offers a declarative programming model that views Urbanets as a distributed sensor database and exposes an SQL-like interface to developers. Context-aware Migratory Services provides a client-server paradigm, where services are capable of migrating to different nodes in the network in order to maintain a continuous and semantically correct interaction with clients. Compared to previous approaches to supporting mobile sensing urban applications, our architectures are entirely distributed and do not assume constant availability of Internet connectivity. In addition, they allow on-demand collection of sensor data with the accuracy and at the frequency required by every application. These architectures have been implemented in Java and tested on smart phones. They have proved successful in supporting several prototype applications and experimental results obtained in ad hoc networks of phones have demonstrated their feasibility with reasonable performance in terms of latency, memory, and energy consumption.

The scientific basis and development of a matrix metalloproteinase (MMP) -8 specific chair-side test for monitoring of periodontal health and disease from gingival crevicular fluid

Matrix metalloproteinase (MMP) -8, collagenase-2, is a key mediator of irreversible tissue destruction in chronic periodontitis and detectable in gingival crevicular fluid (GCF). MMP-8 mostly originates from neutrophil leukocytes, the first line of defence cells which exist abundantly in GCF, especially in inflammation. MMP-8 is capable of degrading almost all extra-cellular matrix and basement membrane components and is especially efficient against type I collagen. Thus the expression of MMP-8 in GCF could be valuable in monitoring the activity of periodontitis and possibly offers a diagnostic means to predict progression of periodontitis. In this study the value of MMP-8 detection from GCF in monitoring of periodontal health and disease was evaluated with special reference to its ability to differentiate periodontal health and different disease states of the periodontium and to recognise the progression of periodontitis, i.e. active sites. For chair-side detection of MMP-8 from the GCF or peri-implant sulcus fluid (PISF) samples, a dip-stick test based on immunochromatography involving two monoclonal antibodies was developed. The immunoassay for the detection of MMP-8 from GCF was found to be more suitable for monitoring of periodontitis than detection of GCF elastase concentration or activity. Periodontally healthy subjects and individuals suffering of gingivitis or of periodontitis could be differentiated by means of GCF MMP-8 levels and dipstick testing when the positive threshold value of the MMP-8 chair-side test was set at 1000 µg/l. MMP-8 dipstick test results from periodontally healthy and from subjects with gingivitis were mainly negative while periodontitis patients sites with deep pockets ( 5 mm) and which were bleeding on probing were most often test positive. Periodontitis patients GCF MMP-8 levels decreased with hygiene phase periodontal treatment (scaling and root planing, SRP) and even reduced during the three month maintenance phase. A decrease in GCF MMP-8 levels could be monitored with the MMP-8 test. Agreement between the test stick and the quantitative assay was very good (κ = 0.81) and the test provided a baseline sensitivity of 0.83 and specificity of 0.96. During the 12-month longitudinal maintenance phase, periodontitis patients progressing sites (sites with an increase in attachment loss ≥ 2 mm during the maintenance phase) had elevated GCF MMP-8 levels compared with stable sites. General mean MMP-8 concentrations in smokers (S) sites were lower than in non-smokers (NS) sites but in progressing S and NS sites concentrations were at an equal level. Sites with exceptionally and repeatedly elevated MMP-8 concentrations during the maintenance phase were clustered in smoking patients with poor response to SRP (refractory patients). These sites especially were identified by the MMP-8 test. Subgingival plaque samples from periodontitis patients deep periodontal pockets were examined by polymerase chain reaction (PCR) to find out if periodontal lesions may serve as a niche for Chlamydia pneumoniae. Findings were compared with the clinical periodontal parameters and GCF MMP-8 levels to determine the correlation with periodontal status. Traces of C. pneumoniae were identified from one periodontitis patient s pooled subgingival plaque sample by means of PCR. After periodontal treatment (SRP) the sample was negative for C. pneumoniae. Clinical parameters or biomarkers (MMP-8) of the patient with the positive C. pneumoniae finding did not differ from other study patients. In this study it was concluded that MMP-8 concentrations in GCF of sites from periodontally healthy individuals, subjects with gingivitis or with periodontitis are at different levels. The cut-off value of the developed MMP-8 test is at an optimal level to differentiate between these conditions and can possibly be utilised in identification of individuals at the risk of the transition of gingivitis to periodontitis. In periodontitis patients, repeatedly elevated GCF MMP-8 concentrations may indicate sites at risk of progression of periodontitis as well as patients with poor response to conventional periodontal treatment (SRP). This can be monitored by MMP-8 testing. Despite the lower mean GCF MMP-8 concentrations in smokers, a fraction of smokers sites expressed very high MMP-8 concentrations together with enhanced periodontal activity and could be identified with MMP-8 specific chair-side test. Deep periodontal lesions may be niches for non-periodontopathogenic micro-organisms with systemic effects like C. pneumoniae and possibly play a role in the transmission from one subject to another.

Enhanced processing of SPOT multispectral satellite imagery for environmental monitoring and modelling

The Taita Hills in southeastern Kenya form the northernmost part of Africa’s Eastern Arc Mountains, which have been identified by Conservation International as one of the top ten biodiversity hotspots on Earth. As with many areas of the developing world, over recent decades the Taita Hills have experienced significant population growth leading to associated major changes in land use and land cover (LULC), as well as escalating land degradation, particularly soil erosion. Multi-temporal medium resolution multispectral optical satellite data, such as imagery from the SPOT HRV, HRVIR, and HRG sensors, provides a valuable source of information for environmental monitoring and modelling at a landscape level at local and regional scales. However, utilization of multi-temporal SPOT data in quantitative remote sensing studies requires the removal of atmospheric effects and the derivation of surface reflectance factor. Furthermore, for areas of rugged terrain, such as the Taita Hills, topographic correction is necessary to derive comparable reflectance throughout a SPOT scene. Reliable monitoring of LULC change over time and modelling of land degradation and human population distribution and abundance are of crucial importance to sustainable development, natural resource management, biodiversity conservation, and understanding and mitigating climate change and its impacts. The main purpose of this thesis was to develop and validate enhanced processing of SPOT satellite imagery for use in environmental monitoring and modelling at a landscape level, in regions of the developing world with limited ancillary data availability. The Taita Hills formed the application study site, whilst the Helsinki metropolitan region was used as a control site for validation and assessment of the applied atmospheric correction techniques, where multiangular reflectance field measurements were taken and where horizontal visibility meteorological data concurrent with image acquisition were available. The proposed historical empirical line method (HELM) for absolute atmospheric correction was found to be the only applied technique that could derive surface reflectance factor within an RMSE of < 0.02 ps in the SPOT visible and near-infrared bands; an accuracy level identified as a benchmark for successful atmospheric correction. A multi-scale segmentation/object relationship modelling (MSS/ORM) approach was applied to map LULC in the Taita Hills from the multi-temporal SPOT imagery. This object-based procedure was shown to derive significant improvements over a uni-scale maximum-likelihood technique. The derived LULC data was used in combination with low cost GIS geospatial layers describing elevation, rainfall and soil type, to model degradation in the Taita Hills in the form of potential soil loss, utilizing the simple universal soil loss equation (USLE). Furthermore, human population distribution and abundance were modelled with satisfactory results using only SPOT and GIS derived data and non-Gaussian predictive modelling techniques. The SPOT derived LULC data was found to be unnecessary as a predictor because the first and second order image texture measurements had greater power to explain variation in dwelling unit occurrence and abundance. The ability of the procedures to be implemented locally in the developing world using low-cost or freely available data and software was considered. The techniques discussed in this thesis are considered equally applicable to other medium- and high-resolution optical satellite imagery, as well the utilized SPOT data.

LLVM-kääntäjäarkkitehtuuri ja sen soveltuvuus Java-virtuaalikoneen toteutuspohjaksi

Low Level Virtual Machine (LLVM) on moderni koko ohjelman elinkaaren optimointeihin keskittyvä kääntäjäarkkitehtuuri. Java-virtuaalikone on puolestaan suosittu korkean tason virtuaalikone, johon monien ohjelmointikielten toteutus nykyään perustuu. Tutkielmassa esitellään alun perin suorituskykyisen C- ja C++-kääntäjän toteuttamiseksi luotu LLVM-järjestelmä ja arvioidaan, miten hyvin LLVM-infrastruktuuri tukee Java-virtuaalikoneen toteuttamista. Tämän lisäksi tutkielmassa pohditaan, miten dynaamisten kielten usein tarvitsemaa suoritusaikaista ja lähdekieliriippuvaista optimointia voidaan tukea lähdekieliriippumattomassa LLVM-järjestelmässä. Lopuksi tutkielmassa esitellään kehitysehdotelma yleisen roskienkeruuinfrastruktuurin toteuttamiseksi LLVM:ssä, mikä tukisi dynaamista muistia automaattisesti hallitsevien kielten, kuten Javan ja sen virtuaalikoneen toteuttamista.

Offloading content routing cost from routers

The publish/subscribe paradigm has lately received much attention. In publish/subscribe systems, a specialized event-based middleware delivers notifications of events created by producers (publishers) to consumers (subscribers) interested in that particular event. It is considered a good approach for implementing Internet-wide distributed systems as it provides full decoupling of the communicating parties in time, space and synchronization. One flavor of the paradigm is content-based publish/subscribe which allows the subscribers to express their interests very accurately. In order to implement a content-based publish/subscribe middleware in way suitable for Internet scale, its underlying architecture must be organized as a peer-to-peer network of content-based routers that take care of forwarding the event notifications to all interested subscribers. A communication infrastructure that provides such service is called a content-based network. A content-based network is an application-level overlay network. Unfortunately, the expressiveness of the content-based interaction scheme comes with a price - compiling and maintaining the content-based forwarding and routing tables is very expensive when the amount of nodes in the network is large. The routing tables are usually partially-ordered set (poset) -based data structures. In this work, we present an algorithm that aims to improve scalability in content-based networks by reducing the workload of content-based routers by offloading some of their content routing cost to clients. We also provide experimental results of the performance of the algorithm. Additionally, we give an introduction to the publish/subscribe paradigm and content-based networking and discuss alternative ways of improving scalability in content-based networks. ACM Computing Classification System (CCS): C.2.4 [Computer-Communication Networks]: Distributed Systems - Distributed applications

An XML Messaging Service for Mobile Devices

In recent years, XML has been accepted as the format of messages for several applications. Prominent examples include SOAP for Web services, XMPP for instant messaging, and RSS and Atom for content syndication. This XML usage is understandable, as the format itself is a well-accepted standard for structured data, and it has excellent support for many popular programming languages, so inventing an application-specific format no longer seems worth the effort. Simultaneously with this XML's rise to prominence there has been an upsurge in the number and capabilities of various mobile devices. These devices are connected through various wireless technologies to larger networks, and a goal of current research is to integrate them seamlessly into these networks. These two developments seem to be at odds with each other. XML as a fully text-based format takes up more processing power and network bandwidth than binary formats would, whereas the battery-powered nature of mobile devices dictates that energy, both in processing and transmitting, be utilized efficiently. This thesis presents the work we have performed to reconcile these two worlds. We present a message transfer service that we have developed to address what we have identified as the three key issues: XML processing at the application level, a more efficient XML serialization format, and the protocol used to transfer messages. Our presentation includes both a high-level architectural view of the whole message transfer service, as well as detailed descriptions of the three new components. These components consist of an API, and an associated data model, for XML processing designed for messaging applications, a binary serialization format for the data model of the API, and a message transfer protocol providing two-way messaging capability with support for client mobility. We also present relevant performance measurements for the service and its components. As a result of this work, we do not consider XML to be inherently incompatible with mobile devices. As the fixed networking world moves toward XML for interoperable data representation, so should the wireless world also do to provide a better-integrated networking infrastructure. However, the problems that XML adoption has touch all of the higher layers of application programming, so instead of concentrating simply on the serialization format we conclude that improvements need to be made in an integrated fashion in all of these layers.

Större frihet - bättre lokalt anpassad service? : Förvaltningsreformer och kommunernas service för utvecklingsstörda 1994-2000

In the beginning of the 1990s the legislation regarding the municipalities and the system of central government transfers were reformed in Finland. This resulted in a move from detailed governmental control to increased municipal autonomy. The purpose of this decentralization was to enable the municipalities to better adapt their administration and service supply to local needs. The aim of this study was to explore the effects of the increased municipal autonomy on the organization of services for people with intellectual disabilities. Did the increased autonomy cause the municipalities to alter their service supply and production and did the services become more adapted to local needs? The data consists of statistical information on service use and production, and also of background data such as demographics, economics and political elections on 452 municipalities in Finland from the years 1994 and 2000. The methods used are cluster analysis, discriminant analysis and factor analysis. The municipalities could be grouped in two categories: those which offered mainly one kind of residential services and others which had more varied mixes of services. The use of institutional care had decreased and municipalities which used institutional care as their primary form of service were mostly very small municipalities in 2000. The situation had changed from 1994, when institutional care was the primary service for municipalities of all sizes. Also the service production had become more differentiated and the municipalities had started using more varied ways of production. More municipalities had started producing their own services and private production had increased as well. Furthermore, the increase in local autonomy had opened up possibilities for local politics to influence both the service selection and methods of production. The most significant motive for changes in the service structure was high unemployment and an increasing share of elderly people in the population, particularly in sparsely populated areas. Municipalities with a low level of resources had made more changes in their service organization while those with more resources had been able to carry on as before. Key words: service structure, service for people with intellectual disabilities, municipalities, contingency theory, New Public Management

Ecology, population genetics and conservation of the African violet

The ongoing rapid fragmentation of tropical forests is a major threat to global biodiversity. This is because many of the tropical forests are so-called biodiversity 'hotspots', areas that host exceptional species richness and concentrations of endemic species. Forest fragmentation has negative ecological and genetic consequences for plant survival. Proposed reasons for plant species' loss in forest fragments are, e.g., abiotic edge effects, altered species interactions, increased genetic drift, and inbreeding depression. To be able to conserve plants in forest fragments, the ecological and genetic processes that threaten the species have to be understood. That is possible only after obtaining adequate information on their biology, including taxonomy, life history, reproduction, and spatial and genetic structure of the populations. In this research, I focused on the African violet (genus Saintpaulia), a little-studied conservation flagship from the Eastern Arc Mountains and Coastal Forests hotspot of Tanzania and Kenya. The main objective of the research was to increase understanding of the life history, ecology and population genetics of Saintpaulia that is needed for the design of appropriate conservation measures. A further aim was to provide population-level insights into the difficult taxonomy of Saintpaulia. Ecological field work was conducted in a relatively little fragmented protected forest in the Amani Nature Reserve in the East Usambara Mountains, in northeastern Tanzania, complemented by population genetic laboratory work and ecological experiments in Helsinki, Finland. All components of the research were conducted with Saintpaulia ionantha ssp. grotei, which forms a taxonomically controversial population complex in the study area. My results suggest that Saintpaulia has good reproductive performance in forests with low disturbance levels in the East Usambara Mountains. Another important finding was that seed production depends on sufficient pollinator service. The availability of pollinators should thus be considered in the in situ management of threatened populations. Dynamic population stage structures were observed suggesting that the studied populations are demographically viable. High mortality of seedlings and juveniles was observed during the dry season but this was compensated by ample recruitment of new seedlings after the rainy season. Reduced tree canopy closure and substrate quality are likely to exacerbate seedling and juvenile mortality, and, therefore, forest fragmentation and disturbance are serious threats to the regeneration of Saintpaulia. Restoration of sufficient shade to enhance seedling establishment is an important conservation measure in populations located in disturbed habitats. Long-term demographic monitoring, which enables the forecasting of a population s future, is also recommended in disturbed habitats. High genetic diversities were observed in the populations, which suggest that they possess the variation that is needed for evolutionary responses in a changing environment. Thus, genetic management of the studied populations does not seem necessary as long as the habitats remain favourable for Saintpaulia. The observed high levels of inbreeding in some of the populations, and the reduced fitness of the inbred progeny compared to the outbred progeny, as revealed by the hand-pollination experiment, indicate that inbreeding and inbreeding depression are potential mechanisms contributing to the extinction of Saintpaulia populations. The relatively weak genetic divergence of the three different morphotypes of Saintpaulia ionantha ssp. grotei lend support to the hypothesis that the populations in the Usambara/lowlands region represent a segregating metapopulation (or metapopulations), where subpopulations are adapting to their particular environments. The partial genetic and phenological integrity, and the distinct trailing habit of the morphotype 'grotei' would, however, justify its placement in a taxonomic rank of its own, perhaps in a subspecific rank.

Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.

Measurements of adequacy of anesthesia and level of consciousness during surgery and intensive care

The adequacy of anesthesia has been studied since the introduction of balanced general anesthesia. Commercial monitors based on electroencephalographic (EEG) signal analysis have been available for monitoring the hypnotic component of anesthesia from the beginning of the 1990s. Monitors measuring the depth of anesthesia assess the cortical function of the brain, and have gained acceptance during surgical anesthesia with most of the anesthetic agents used. However, due to frequent artifacts, they are considered unsuitable for monitoring consciousness in intensive care patients. The assessment of analgesia is one of the cornerstones of general anesthesia. Prolonged surgical stress may lead to increased morbidity and delayed postoperative recovery. However, no validated monitoring method is currently available for evaluating analgesia during general anesthesia. Awareness during anesthesia is caused by an inadequate level of hypnosis. This rare but severe complication of general anesthesia may lead to marked emotional stress and possibly posttraumatic stress disorder. In the present series of studies, the incidence of awareness and recall during outpatient anesthesia was evaluated and compared with that of in inpatient anesthesia. A total of 1500 outpatients and 2343 inpatients underwent a structured interview. Clear intraoperative recollections were rare the incidence being 0.07% in outpatients and 0.13% in inpatients. No significant differences emerged between outpatients and inpatients. However, significantly smaller doses of sevoflurane were administered to outpatients with awareness than those without recollections (p<0.05). EEG artifacts in 16 brain-dead organ donors were evaluated during organ harvest surgery in a prospective, open, nonselective study. The source of the frontotemporal biosignals in brain-dead subjects was studied, and the resistance of bispectral index (BIS) and Entropy to the signal artifacts was compared. The hypothesis was that in brain-dead subjects, most of the biosignals recorded from the forehead would consist of artifacts. The original EEG was recorded and State Entropy (SE), Response Entropy (RE), and BIS were calculated and monitored during solid organ harvest. SE differed from zero (inactive EEG) in 28%, RE in 29%, and BIS in 68% of the total recording time (p<0.0001 for all). The median values during the operation were SE 0.0, RE 0.0, and BIS 3.0. In four of the 16 organ donors, EEG was not inactive, and unphysiologically distributed, nonreactive rhythmic theta activity was present in the original EEG signal. After the results from subjects with persistent residual EEG activity were excluded, SE, RE, and BIS differed from zero in 17%, 18%, and 62% of the recorded time, respectively (p<0.0001 for all). Due to various artifacts, the highest readings in all indices were recorded without neuromuscular blockade. The main sources of artifacts were electrocauterization, electromyography (EMG), 50-Hz artifact, handling of the donor, ballistocardiography, and electrocardiography. In a prospective, randomized study of 26 patients, the ability of Surgical Stress Index (SSI) to differentiate patients with two clinically different analgesic levels during shoulder surgery was evaluated. SSI values were lower in patients with an interscalene brachial plexus block than in patients without an additional plexus block. In all patients, anesthesia was maintained with desflurane, the concentration of which was targeted to maintain SE at 50. Increased blood pressure or heart rate (HR), movement, and coughing were considered signs of intraoperative nociception and treated with alfentanil. Photoplethysmographic waveforms were collected from the contralateral arm to the operated side, and SSI was calculated offline. Two minutes after skin incision, SSI was not increased in the brachial plexus block group and was lower (38 ± 13) than in the control group (58 ± 13, p<0.005). Among the controls, one minute prior to alfentanil administration, SSI value was higher than during periods of adequate antinociception, 59 ± 11 vs. 39 ± 12 (p<0.01). The total cumulative need for alfentanil was higher in controls (2.7 ± 1.2 mg) than in the brachial plexus block group (1.6 ± 0.5 mg, p=0.008). Tetanic stimulation to the ulnar region of the hand increased SSI significantly only among patients with a brachial plexus block not covering the site of stimulation. Prognostic value of EEG-derived indices was evaluated and compared with Transcranial Doppler Ultrasonography (TCD), serum neuron-specific enolase (NSE) and S-100B after cardiac arrest. Thirty patients resuscitated from out-of-hospital arrest and treated with induced mild hypothermia for 24 h were included. Original EEG signal was recorded, and burst suppression ratio (BSR), RE, SE, and wavelet subband entropy (WSE) were calculated. Neurological outcome during the six-month period after arrest was assessed with the Glasgow-Pittsburgh Cerebral Performance Categories (CPC). Twenty patients had a CPC of 1-2, one patient had a CPC of 3, and nine patients died (CPC 5). BSR, RE, and SE differed between good (CPC 1-2) and poor (CPC 3-5) outcome groups (p=0.011, p=0.011, p=0.008, respectively) during the first 24 h after arrest. WSE was borderline higher in the good outcome group between 24 and 48 h after arrest (p=0.050). All patients with status epilepticus died, and their WSE values were lower (p=0.022). S-100B was lower in the good outcome group upon arrival at the intensive care unit (p=0.010). After hypothermia treatment, NSE and S-100B values were lower (p=0.002 for both) in the good outcome group. The pulsatile index was also lower in the good outcome group (p=0.004). In conclusion, the incidence of awareness in outpatient anesthesia did not differ from that in inpatient anesthesia. Outpatients are not at increased risk for intraoperative awareness relative to inpatients undergoing general anesthesia. SE, RE, and BIS showed non-zero values that normally indicate cortical neuronal function, but were in these subjects mostly due to artifacts after clinical brain death diagnosis. Entropy was more resistant to artifacts than BIS. During general anesthesia and surgery, SSI values were lower in patients with interscalene brachial plexus block covering the sites of nociceptive stimuli. In detecting nociceptive stimuli, SSI performed better than HR, blood pressure, or RE. BSR, RE, and SE differed between the good and poor neurological outcome groups during the first 24 h after cardiac arrest, and they may be an aid in differentiating patients with good neurological outcomes from those with poor outcomes after out-of-hospital cardiac arrest.

Patient exposure monitoring and radiation qualities in two-dimensional digital x-ray imaging

The methods for estimating patient exposure in x-ray imaging are based on the measurement of radiation incident on the patient. In digital imaging, the useful dose range of the detector is large and excessive doses may remain undetected. Therefore, real-time monitoring of radiation exposure is important. According to international recommendations, the measurement uncertainty should be lower than 7% (confidence level 95%). The kerma-area product (KAP) is a measurement quantity used for monitoring patient exposure to radiation. A field KAP meter is typically attached to an x-ray device, and it is important to recognize the effect of this measurement geometry on the response of the meter. In a tandem calibration method, introduced in this study, a field KAP meter is used in its clinical position and calibration is performed with a reference KAP meter. This method provides a practical way to calibrate field KAP meters. However, the reference KAP meters require comprehensive calibration. In the calibration laboratory it is recommended to use standard radiation qualities. These qualities do not entirely correspond to the large range of clinical radiation qualities. In this work, the energy dependence of the response of different KAP meter types was examined. According to our findings, the recommended accuracy in KAP measurements is difficult to achieve with conventional KAP meters because of their strong energy dependence. The energy dependence of the response of a novel large KAP meter was found out to be much lower than with a conventional KAP meter. The accuracy of the tandem method can be improved by using this meter type as a reference meter. A KAP meter cannot be used to determine the radiation exposure of patients in mammography, in which part of the radiation beam is always aimed directly at the detector without attenuation produced by the tissue. This work assessed whether pixel values from this detector area could be used to monitor the radiation beam incident on the patient. The results were congruent with the tube output calculation, which is the method generally used for this purpose. The recommended accuracy can be achieved with the studied method. New optimization of radiation qualities and dose level is needed when other detector types are introduced. In this work, the optimal selections were examined with one direct digital detector type. For this device, the use of radiation qualities with higher energies was recommended and appropriate image quality was achieved by increasing the low dose level of the system.

From trading to eCommunity management

"The increasing pressure for enterprises to join into agile business networks is changing the requirements on the enterprise computing systems. The supporting infrastructure is increasingly required to provide common facilities and societal infrastructure services to support the lifecycle of loosely-coupled, eContract-governed business networks. The required facilities include selection of those autonomously administered business services that the enterprises are prepared to provide and use, contract negotiations, and furthermore, monitoring of the contracted behaviour with potential for breach management. The essential change is in the requirement of a clear mapping between business-level concepts and the automation support for them. Our work has focused on developing B2B middleware to address the above challenges; however, the architecture is not feasible without management facilities for trust-aware decisions for entering business networks and interacting within them. This paper discusses how trust-based decisions are supported and positioned in the B2B middleware."

Towards Multiculturalism in Turkish Public Service Broadcasting

The announcement of Turkey as a European Union (EU) candidate country in the Helsinki Summit (10, 11 December 1999) marked a distinct change of identity policy and attitudes towards its citizens. A result in the shift of mindset has been the launch of the first public service broadcasting TV channel for Kurdish people on the 1st of January 2009. TRT 6 (Şeş) broadcasting in unofficial Kurdish language is run by Turkish Radio and Television Corporation (TRT). The thesis attempts to elaborate on the discussions surrounding the launch of TRT 6, Turkey’s first public service broadcasting TV channel for its Kurdish citizens. The research aims at finding the discourses of multiculturalism and public service broadcasting through the mainstream Turkish newspapers, Cumhuriyet, Hurriyet, Sabah, Taraf and Zaman. The method used for the research is Critical Discourse Analysis (CDA) and the representative newspapers of the Turkish print media are under the question: How has the launch of TRT 6, as the first public service broadcasting channel of Turkey in Kurdish language, been discussed by Turkish daily newspapers in terms of multiculturalism and minority media? The most significant results of the research is that the concerning newspapers have mostly discussed the launch of TRT 6 in the same line with their political affiliation. Thus it is comprehensively concluded that the selected newspapers proved holding a high level of political parallelism, and low professionalism. However, it should be noted that Taraf differs itself from others while challenging the hegemonic discourses embedded in the articles of the other newspapers. Moreover, the study detected three types of discourses: Pro-multiculturalism discourse, Unification discourse, and Assimilation discourse. It can be concluded that in Turkey, media owners and even individual journalists have incentives to form ideological alliances with political parties, and media appears to be an instrument of power struggle. Today, Turkey seems to restore Kurdish identity in its identity policy and aims to proceed with the negotiation for membership of the European Union (EU). The country still strives to transform from the traditional nation-state to a multiethnic democratic state, with multiculturalism as a policy discussed throughout the two terms that the AKP government has been in power. However, this transformation is not an easy process because of the deep-rooted traditions of the nation-state structure that has also polarized the Turkish press.