Power and Authority. Birgitta of Sweden and her Revelations

In the High Middle Ages female saints were customarily noble virgins. Thus, as a wife and a mother of eight children, the Swedish noble lady Birgitta (1302/3 1373) was an atypical candidate for sanctity. However, in 1391 she was canonized only 18 years after her death and became a role model for many late medieval women, who were mothers and widows. The dissertation Power and Authority Birgitta of Sweden and Her Revelations investigates how Birgitta went about establishing her power and authority during the first ten years of her career as a living saint, in 1340 1349. It is written from the perspectives of gender, authority, and power. The sources consist of approximately seven hundred revelations, hagiographical texts and other medieval documents. This work concentrates on the interaction between Birgitta and her audience. During her lifetime Birgitta was already regarded as a holy woman, as a living saint. A living saint could be given no formal papal or other recognition, for one could never be certain about his or her future activities. Thus, the living saint needed an audience for whom to perform signs of sanctity. In this study particular attention is paid to situations within which the power relations between the living saint and her audience can be traced and are open to critical analysis. Situations of conflict that arose in Birgitta s life are especially fruitful for this purpose. During the Middle Ages, institutional power and authority were exclusively in the hands of secular male leaders and churchmen. In this work it is argued, however, that Birgitta used different kinds of power than men. It is evident that she exercized influence on lay people as well as on secular and clerical authorities. The second, third, and fourth chapter of this study examine the beginning of Birgitta s career as a visionary, what factors and influences lay behind it, and what kind of roles they played in establishing her religious authority. The fifth, sixth, and seventh chapter concentrate on Birgitta s exercising of power in specific situations during her time in Sweden until she left on a pilgrimage to Rome in 1349. The central question is how she exercised power with different people. As a result, this book will offer a narrative of Birgitta s social interactions in Sweden seen from the perspectives of power and authority. Along with the concept of power, authority is a key issue. By definition, one who has power also has authority but a person who does not have official power can, nevertheless, have authority. Authority in action is defined here as meaning that a person was listened to. Birgitta acted both in situations of open conflict and where no conflict was evident. Her strategies included, for example, inducement, encouragement and flattery. In order to make people do as she felt was right she also threatened them openly with divine wrath. Sometimes she even used both positive persuasion and threats. Birgitta s power seems very similar to that of priests and ascetics. Common to all of them was that their power demanded interaction with other people and audiences. Because Birgitta did not have power and authority ex officio she had to persuade people to believe in her powers. She did this because she was convinced of her mission and sought to make people change their lives. In so doing, she moved from the domestic field to the public fields of religion and politics.

Sankarihautaus vapaussodassa : valkoisten kaatuneiden hautaaminen Suomessa vuonna 1918

Civil War Hero Burials the funerals of the fallen White in Finland in 1918 This study focuses on the burial with honours of fallen White combatants during the Finnish Civil War of 1918, as well as on the reasons underpinning the practice. The main sources of the study included the archives of the White army, the Civil Guard organisation and the Church, as well as the newspapers. The genetic method of history research was used. Both the existing tradition of military burials and the ecclesiastical burial culture influenced the burials of those who fell during the Civil War. The first war hero funerals took place as early as the beginning of February 1918, and the first larger-scale collective funerals were organised in Laihia and Vaasa in the Ostrobothnia province, with the latter attended by the supreme civil and military leaders of White Finland. From early on, these funerals assumed their characteristic features, such as the lion flag a design for the Finnish national flag proposed immediately upon the declaration of the country s independence military parades, lines of honour guards, eulogies, salutes and common war hero graves. As a result of the general offensive begun in mid-March 1918, the numbers of the fallen multiplied, so special organisations were established to handle the burials of the fallen. At the same time, the war hero funerals became more frequent and diffused, and the numbers of the buried grew throughout the country. In early March, the advocates of the republican system of government published their appeal in the newspapers, requesting that collective graves for those who fell in the war prepared in every locality. They motivated their request by stating that it was the funerals in particular that had inspired many men to join the ranks voluntarily in the first place, and that the large collective soldiers graves increased the numbers of those who answered the call and left for the front. The Civil Guard organisation arranged the burials of war heroes. The clergy contributed by officiating the religious service and by clearly aligning themselves with the Whites in their eulogies. The teachings of the Lutheran Church suggest that they found the Whites to be the temporal authority instituted by God, and therefore authorised raising the sword against the Reds. Speaking at the funerals with great pomp and sentimental power, the leaders of the Civil Guard and the exponents of the learned classes instigated their audiences against the Reds. The funeral speeches idealised the war hero s death by recalling military history since the times of ancient Greece. Being of the emblematic colour of the Whites, the white coffin assumed a particular importance connected to ideas of biblical purity and innocence. By the end of May 1918, almost 3,300 Whites were buried in the soldiers graves prepared by the burial organisation in some 400 localities. Only about 200 men remained missing in action or unidentified. The largest common graves accommodated over 60 fallen combatants. Thus, the traditions of the 1918 Civil War directly influenced war hero burial practices, which continued into the Finnish Winter War of 1939.

Effect of long-wave UV radiation on mouse melanoma: an in vitro and in vivo study

The skin cancer incidence has increased substantially over the past decades and the role of ultraviolet (UV) radiation in the etiology of skin cancer is well established. Ultraviolet B radiation (280-320 nm) is commonly considered as the more harmful part of the UV-spectrum due to its DNA-damaging potential and well-known carcinogenic effects. Ultraviolet A radiation (320-400 nm) is still regarded as a relatively low health hazard. However, UVA radiation is the predominant component in sunlight, constituting more than 90% of the environmentally relevant solar ultraviolet radiation. In the light of the recent scientific evidence, UVA has been shown to have genotoxic and immunologic effects, and it has been proposed that UVA plays a significant role in the development of skin cancer. Due to the popularity of skin tanning lamps, which emit high intensity UVA radiation and because of the prolonged sun tanning periods with the help of effective UVB blockers, the potential deleterious effects of UVA has emerged as a source of concern for public health. The possibility that UV radiation may affect melanoma metastasis has not been addressed before. UVA radiation can modulate various cellular processes, some of which might affect the metastatic potential of melanoma cells. The aim of the present study was to investigate the possible role of UVA irradiation on the metastatic capacity of mouse melanoma both in vitro and in vivo. The in vitro part of the study dealt with the enhancement of the intercellular interactions occurring either between tumor cells or between tumor cells and endothelial cells after UVA irradiation. The use of the mouse melanoma/endothelium in vitro model showed that a single-dose of UVA to melanoma cells causes an increase in melanoma cell adhesiveness to non-irradiated endothelium after 24-h irradiation. Multiple-dose irradiation of melanoma cells already increased adhesion at a 1-h time-point, which suggests the possible cumulative effect of multiple doses of UVA irradiation. This enhancement of adhesiveness might lead to an increase in binding tumor cells to the endothelial lining of vasculature in various internal organs if occurring also in vivo. A further novel observation is that UVA induced both decline in the expression of E-cadherin adhesion molecule and increase in the expression of the N-cadherin adhesion molecule. In addition, a significant decline in homotypic melanoma-melanoma adhesion (clustering) was observed, which might result in the reduction of E-cadherin expression. The aim of the in vivo animal study was to confirm the physiological significance of previously obtained in vitro results and to determine whether UVA radiation might increase melanoma metastasis in vivo. The use of C57BL/6 mice and syngeneic melanoma cell lines B16-F1 and B16-F10 showed that mice, which were i.v. injected with B16-F1 melanoma cells and thereafter exposed to UVA developed significantly more lung metastases when compared with the non-UVA-exposed group. To study the mechanism behind this phenomenon, the direct effect of UVA-induced lung colonization capacity was examined by the in vitro exposure of B16-F1 cells. Alternatively, the UVA-induced immunosuppression, which might be involved in increased melanoma metastasis, was measured by standard contact hypersensitivity assay (CHS). It appears that the UVA-induced increase of metastasis in vivo might be caused by a combination of UVA-induced systemic immunosuppression, and to the lesser extent, it might be caused by the increased adhesiveness of UVA irradiated melanoma cells. Finally, the UVA effect on gene expression in mouse melanoma was determined by a cDNA array, which revealed UVA-induced changes in the 9 differentially expressed genes that are involved in angiogenesis, cell cycle, stress-response, and cell motility. These results suggest that observed genes might be involved in cellular response to UVA and a physiologically relevant UVA dose have previously unknown cellular implications. The novel results presented in this thesis offer evidence that UVA exposure might increase the metastatic potential of the melanoma cells present in blood circulation. Considering the wellknown UVA-induced deleterious effects on cellular level, this study further supports the notion that UVA radiation might have more potential impact on health than previously suggested. The possibility of the pro-metastatic effects of UVA exposure might not be of very high significance for daily exposures. However, UVA effects might gain physiological significance following extensive sunbathing or solaria tanning periods. Whether similar UVA-induced pro-metastatic effects occur in people sunbathing or using solaria remains to be determined. In the light of the results presented in this thesis, the avoidance of solaria use could be well justified.

Accuracy of absorbed dose in external photon beam radiotherapy : what level is sufficient and how to approach it?

Radiation therapy (RT) plays currently significant role in curative treatments of several cancers. External beam RT is carried out mostly by using megavoltage beams of linear accelerators. Tumor eradication and normal tissue complications correlate to dose absorbed in tissues. Normally this dependence is steep and it is crucial that actual dose within patient accurately correspond to the planned dose. All factors in a RT procedure contain uncertainties requiring strict quality assurance. From hospital physicist´s point of a view, technical quality control (QC), dose calculations and methods for verification of correct treatment location are the most important subjects. Most important factor in technical QC is the verification that radiation production of an accelerator, called output, is within narrow acceptable limits. The output measurements are carried out according to a locally chosen dosimetric QC program defining measurement time interval and action levels. Dose calculation algorithms need to be configured for the accelerators by using measured beam data. The uncertainty of such data sets limits for best achievable calculation accuracy. All these dosimetric measurements require good experience, are workful, take up resources needed for treatments and are prone to several random and systematic sources of errors. Appropriate verification of treatment location is more important in intensity modulated radiation therapy (IMRT) than in conventional RT. This is due to steep dose gradients produced within or close to healthy tissues locating only a few millimetres from the targeted volume. The thesis was concentrated in investigation of the quality of dosimetric measurements, the efficacy of dosimetric QC programs, the verification of measured beam data and the effect of positional errors on the dose received by the major salivary glands in head and neck IMRT. A method was developed for the estimation of the effect of the use of different dosimetric QC programs on the overall uncertainty of dose. Data were provided to facilitate the choice of a sufficient QC program. The method takes into account local output stability and reproducibility of the dosimetric QC measurements. A method based on the model fitting of the results of the QC measurements was proposed for the estimation of both of these factors. The reduction of random measurement errors and optimization of QC procedure were also investigated. A method and suggestions were presented for these purposes. The accuracy of beam data was evaluated in Finnish RT centres. Sufficient accuracy level was estimated for the beam data. A method based on the use of reference beam data was developed for the QC of beam data. Dosimetric and geometric accuracy requirements were evaluated for head and neck IMRT when function of the major salivary glands is intended to be spared. These criteria are based on the dose response obtained for the glands. Random measurement errors could be reduced enabling lowering of action levels and prolongation of measurement time interval from 1 month to even 6 months simultaneously maintaining dose accuracy. The combined effect of the proposed methods, suggestions and criteria was found to facilitate the avoidance of maximal dose errors of up to even about 8 %. In addition, their use may make the strictest recommended overall dose accuracy level of 3 % (1SD) achievable.

The proposed gun laws are not enough

Argues that as a more effective precuationary measure, it would seem that the firearms revocation threshold should be substantially lowered, or at least further clarified in guidance. Response to public debate in light of school shootings.

ISO 13567 - The Proposed International Standard for Structuring Layers in Computer Aided Building Design

Layering is a widely used method for structuring data in CAD-models. During the last few years national standardisation organisations, professional associations, user groups for particular CAD-systems, individual companies etc. have issued numerous standards and guidelines for the naming and structuring of layers in building design. In order to increase the integration of CAD data in the industry as a whole ISO recently decided to define an international standard for layer usage. The resulting standard proposal, ISO 13567, is a rather complex framework standard which strives to be more of a union than the least common denominator of the capabilities of existing guidelines. A number of principles have been followed in the design of the proposal. The first one is the separation of the conceptual organisation of information (semantics) from the way this information is coded (syntax). The second one is orthogonality - the fact that many ways of classifying information are independent of each other and can be applied in combinations. The third overriding principle is the reuse of existing national or international standards whenever appropriate. The fourth principle allows users to apply well-defined subsets of the overall superset of possible layernames. This article describes the semantic organisation of the standard proposal as well as its default syntax. Important information categories deal with the party responsible for the information, the type of building element shown, whether a layer contains the direct graphical description of a building part or additional information needed in an output drawing etc. Non-mandatory information categories facilitate the structuring of information in rebuilding projects, use of layers for spatial grouping in large multi-storey projects, and storing multiple representations intended for different drawing scales in the same model. Pilot testing of ISO 13567 is currently being carried out in a number of countries which have been involved in the definition of the standard. In the article two implementations, which have been carried out independently in Sweden and Finland, are described. The article concludes with a discussion of the benefits and possible drawbacks of the standard. Incremental development within the industry, (where ”best practice” can become ”common practice” via a standard such as ISO 13567), is contrasted with the more idealistic scenario of building product models. The relationship between CAD-layering, document management product modelling and building element classification is also discussed.