Virtual versus classroom language teaching : A comparative study of the learning outcomes and student responses between two English reading comprehension groups

A 26-hour English reading comprehension course was taught to two groups of second year Finnish Pharmacy students: a virtual group (33 students) and a teacher-taught group (25 students). The aims of the teaching experiment were to find out: 1.What has to be taken into account when teaching English reading comprehension to students of pharmacy via the Internet and using TopClass? 2. How will the learning outcomes of the virtual group and the control group differ? 3. How will the students and the Department of Pharmacy respond to the different and new method, i.e. the virtual teaching method? 4. Will it be possible to test English reading comprehension learning material using the groupware tool TopClass? The virtual exercises were written within the Internet authoring environment, TopClass. The virtual group was given the reading material and grammar booklet on paper, but they did the reading comprehension tasks (written by the teacher), autonomously via the Internet. The control group was taught by the same teacher in 12 2-hour sessions, while the virtual group could work independently within the given six weeks. Both groups studied the same material: ten pharmaceutical articles with reading comprehension tasks as well as grammar and vocabulary exercises. Both groups took the same final test. Students in both groups were asked to evaluate the course using a 1 to 5 rating scale and they were also asked to assess their respective courses verbally. A detailed analysis of the different aspects of the student evaluation is given. Conclusions: 1.The virtual students learned pharmaceutical English relatively well but not significantly better than the classroom students 2. The overall student satisfaction in the virtual pharmacy English reading comprehension group was found to be higher than that in the teacher-taught control group. 3. Virtual learning is easier for linguistically more able students; less able students need more time with the teacher. 4. The sample in this study is rather small, but it is a pioneering study. 5. The Department of Pharmacy in the University of Helsinki wishes to incorporate virtual English reading comprehension teaching in its curriculum. 6. The sophisticated and versatile TopClass system is relatively easy for a traditional teacher and quite easy for the students to learn. It can be used e.g. for automatic checking of routine answers and document transfer, which both lighten the workloads of both parties. It is especially convenient for teaching reading comprehension. Key words: English reading comprehension, teacher-taught class, virtual class, attitudes of students, learning outcomes

Specifying Reuse Interfaces for Task-Oriented Framework Specialization

Reuse of existing carefully designed and tested software improves the quality of new software systems and reduces their development costs. Object-oriented frameworks provide an established means for software reuse on the levels of both architectural design and concrete implementation. Unfortunately, due to frame-works complexity that typically results from their flexibility and overall abstract nature, there are severe problems in using frameworks. Patterns are generally accepted as a convenient way of documenting frameworks and their reuse interfaces. In this thesis it is argued, however, that mere static documentation is not enough to solve the problems related to framework usage. Instead, proper interactive assistance tools are needed in order to enable system-atic framework-based software production. This thesis shows how patterns that document a framework s reuse interface can be represented as dependency graphs, and how dynamic lists of programming tasks can be generated from those graphs to assist the process of using a framework to build an application. This approach to framework specialization combines the ideas of framework cookbooks and task-oriented user interfaces. Tasks provide assistance in (1) cre-ating new code that complies with the framework reuse interface specification, (2) assuring the consistency between existing code and the specification, and (3) adjusting existing code to meet the terms of the specification. Besides illustrating how task-orientation can be applied in the context of using frameworks, this thesis describes a systematic methodology for modeling any framework reuse interface in terms of software patterns based on dependency graphs. The methodology shows how framework-specific reuse interface specifi-cations can be derived from a library of existing reusable pattern hierarchies. Since the methodology focuses on reusing patterns, it also alleviates the recog-nized problem of framework reuse interface specification becoming complicated and unmanageable for frameworks of realistic size. The ideas and methods proposed in this thesis have been tested through imple-menting a framework specialization tool called JavaFrames. JavaFrames uses role-based patterns that specify a reuse interface of a framework to guide frame-work specialization in a task-oriented manner. This thesis reports the results of cases studies in which JavaFrames and the hierarchical framework reuse inter-face modeling methodology were applied to the Struts web application frame-work and the JHotDraw drawing editor framework.

Quantifying Time Awake Posturographically

This thesis focuses on the issue of testing sleepiness quantitatively. The issue is relevant to policymakers concerned with traffic- and occupational safety; such testing provides a tool for safety legislation and -surveillance. The findings of this thesis provide guidelines for a posturographic sleepiness tester. Sleepiness ensuing from staying awake merely 17 h impairs our performance as much as the legally proscribed blood alcohol concentration 0.5 does. Hence, sleepiness is a major risk factor in transportation and occupational accidents. The lack of convenient, commercial sleepiness tests precludes testing impending sleepiness levels contrary to simply breath testing for alcohol intoxication. Posturography is a potential sleepiness test, since clinical diurnal balance testing suggests the hypothesis that time awake could be posturographically estimable. Relying on this hypothesis this thesis examines posturographic sleepiness testing for instrumentation purposes. Empirical results from 63 subjects for whom we tested balance with a force platform during wakefulness for maximum 36 h show that sustained wakefulness impairs balance. The results show that time awake is posturographically estimable with 88% accuracy and 97% precision which validates our hypothesis. Results also show that balance scores tested at 13:30 hours serve as a threshold to detect excessive sleepiness. Analytical results show that the test length has a marked effect on estimation accuracy: 18 s tests suffice to identify sleepiness related balance changes, but trades off some of the accuracy achieved with 30 s tests. The procedure to estimate time awake relies on equating the subject s test score to a reference table (comprising balance scores tested during sustained wakefulness, regressed against time awake). Empirical results showed that sustained wakefulness explains 60% of the diurnal balance variations, whereas the time of day explains 40% of the balance variations. The latter fact implies that time awake estimations also must rely on knowing the local times of both test and reference scores.

Mass spectrometry and n-in-one analytics in early drug discovery: Combinatorial chemistry libraries, lipophilicity and absorption screening

This thesis describes current and past n-in-one methods and presents three early experimental studies using mass spectrometry and the triple quadrupole instrument on the application of n-in-one in drug discovery. N-in-one strategy pools and mix samples in drug discovery prior to measurement or analysis. This allows the most promising compounds to be rapidly identified and then analysed. Nowadays properties of drugs are characterised earlier and in parallel with pharmacological efficacy. Studies presented here use in vitro methods as caco-2 cells and immobilized artificial membrane chromatography for drug absorption and lipophilicity measurements. The high sensitivity and selectivity of liquid chromatography mass spectrometry are especially important for new analytical methods using n-in-one. In the first study, the fragmentation patterns of ten nitrophenoxy benzoate compounds, serial homology, were characterised and the presence of the compounds was determined in a combinatorial library. The influence of one or two nitro substituents and the alkyl chain length of methyl to pentyl on collision-induced fragmentation was studied, and interesting structurefragmentation relationships were detected. Two nitro group compounds increased fragmentation compared to one nitro group, whereas less fragmentation was noted in molecules with a longer alkyl chain. The most abundant product ions were nitrophenoxy ions, which were also tested in the precursor ion screening of the combinatorial library. In the second study, the immobilized artificial membrane chromatographic method was transferred from ultraviolet detection to mass spectrometric analysis and a new method was developed. Mass spectra were scanned and the chromatographic retention of compounds was analysed using extract ion chromatograms. When changing detectors and buffers and including n-in-one in the method, the results showed good correlation. Finally, the results demonstrated that mass spectrometric detection with gradient elution can provide a rapid and convenient n-in-one method for ranking the lipophilic properties of several structurally diverse compounds simultaneously. In the final study, a new method was developed for caco-2 samples. Compounds were separated by liquid chromatography and quantified by selected reaction monitoring using mass spectrometry. This method was used for caco-2 samples, where absorption of ten chemically and physiologically different compounds was screened using both single and nin- one approaches. These three studies used mass spectrometry for compound identification, method transfer and quantitation in the area of mixture analysis. Different mass spectrometric scanning modes for the triple quadrupole instrument were used in each method. Early drug discovery with n-in-one is area where mass spectrometric analysis, its possibilities and proper use, is especially important.

Inhomogeneity of asteroid 2008 TC3 (Almahata Sitta meteorites) revealed through magnetic susceptibility measurements

Magnetic susceptibility measurements were performed on freshly fallen Almahata Sitta meteorites. Most recovered samples are polymict ureilites. Those found in the first four months since impact, before the meteorites were exposed to rain, have a magnetic susceptibility in the narrow range of 4.92 ± 0.08 log 10-9 Am2/kg close to the range of other ureilite falls 4.95 ± 0.14 log 10-9 Am2/kg reported by Rochette et al. (2009). The Almahata Sitta samples collected one year after the fall have similar values (4.90 ± 0.06 log 10-9 Am2/kg), revealing that the effect of one-year of terrestrial weathering was not severe yet. However, our reported values are higher than derived from polymict (brecciated) ureilites 4.38 ± 0.47 log 10-9 Am2/kg (Rochette et al. 2009) containing both falls and finds confirming that these are significantly weathered. Additionally other fresh-looking meteorites of non-ureilitic compositions were collected in the Almahata Sitta strewn field. Magnetic susceptibility measurements proved to be a convenient non-destructive method for identifying non-ureilitic meteorites among those collected in the Almahata Sitta strewn field, even among fully crusted. Three such meteorites, no. 16, 25, and 41, were analyzed and their composition determined as EH6, H5 and EL6 respectively (Zolensky et al., 2010). A high scatter of magnetic susceptibility values among small (< 5 g) samples revealed high inhomogeneity within the 2008 TC3 material at scales below 1-2 cm.

Consumption in Rural Bangladesh : Households, Lifestyles, and Identities

Bangladesh, often better known to the outside world as a country of natural calamities, is one of the most densely populated countries in the world. Despite rapid urbanization, more than 75% of the people still live in rural areas. The density of the rural population is also one of the highest in the world. Being a poor and low-income country, its main challenge is to eradicate poverty through increasing equitable income. Since its independence in 1971, Bangladesh has experienced many ups and downs, but over the past three decades, its gross domestic product (GDP) has grown at an impressive rate. Consequently, the country s economy is developing and the country has outperformed many low-income countries in terms of several social indicators. Bangladesh has achieved the Millennium Development Goal (MDG) of eliminating gender disparity in primary and secondary school enrollment. A sharp decline in child and infant mortality rates, increased per capita income, and improved food security have placed Bangladesh on the track to achieving in the near future the status of a middle-income country. All these developments have influenced the consumption pattern of the country. This study explores the consumption scenario of rural Bangladesh, its changing consumption patterns, the relationship between technology and consumption in rural Bangladesh, cultural consumption in rural Bangladesh, and the myriad reasons why consumers nevertheless feel compelled to consume chemically treated foods. Data were collected in two phases in the summers of 2006 and 2008. In 2006, the empirical data were collected from the following three sources: interviews with consumers, producers/sellers, and doctors and pharmacists; observations of sellers/producers; and reviews of articles published in the national English and Bengali (the national language of Bangladesh) daily newspapers. A total of 110 consumers, 25 sellers/producers, 7 doctors, and 7 pharmacists were interviewed and observed. In 2008, data were collected through semi-structured in-depth qualitative interviews, ethnography, and unstructured conversations substantiated by secondary sources and photographs; the total number of persons interviewed was 22. -- Data were also collected on the consumption of food, clothing, housing, education, medical facilities, marriage and dowry, the division of labor, household decision making, different festivals such as Eid (for Muslims), the Bengali New Year, and Durga puja (for Hindus), and leisure. Qualitative methods were applied to the data analysis and were supported by secondary quantitative data. The findings of this study suggest that the consumption patterns of rural Bangladeshis are changing over time along with economic and social development, and that technology has rendered aspects of daily life more convenient. This study identified the perceptions and experiences of rural people regarding technologies in use and explored how culture is associated with consumption. This study identified the reasons behind the use of hazardous chemicals (e.g. calcium carbide, sodium cyclamate, cyanide and formalin, etc.) in foods as well as the extent to which food producers/sellers used such chemicals. In addition, this study assessed consumer perceptions of and attitudes toward these contaminated food items and explored how adulterated foods and food stuffs affect consumer health. This study also showed that consumers were aware that various foods and food stuffs contained hazardous chemicals, and that these adulterated foods and food stuffs were harmful to their health.

Consumers' attitudes towards food prices

High food prices can be a barrier to healthy eating because some of the food products may be perceived as expensive. Understanding the role of price in food purchase situations is important, but only a few studies document attitudes towards expensiveness or cheapness in foods. In this thesis, the role of food price in food choice and consumers attitudes towards food prices were investigated and the aim was to measure the food price attitudes. Food price attitudes were hypothesized to have an impact on consumers willingness to pay judgements and their willingness to buy premium-priced food products. First, using qualitative data consisting of 40 thematic interviews the experiences of the expensiveness and cheapness in foods were explored by using functional food products as a target product category. Second, a Food Price Attitude Scale was developed using four quantitative surveys representing Finnish consumers (2001 N=1158; 2002 N=1156; 2004a N=1113; 2004b N=1027). Food price attitudes were confirmed to compose a multidimensional construct and consumers may perceive positive and negative attitudes towards both high and low food prices. Finnish consumers were clustered into four groups based on their food price attitudes. In the first group, 29% of respondents were negative towards high food prices and they were willing to seek low food prices, whereas respondents in another group (22%) were positive towards high food prices. Additionally, in the third group consumers (17%) were willing to pay for high quality but still looked for low food prices. In the fourth group, consumers (32%) were willing to look for low food prices, unwilling to pay for high quality, but high-priced food was appreciated if offered to others. It was found in qualitative data that consumers willingness to accept high prices in foods was connected to price fairness and to justifications. Feelings of fairness or unfairness might be a core element of food price attitudes. Using quantitative methods, it was confirmed that positive attitudes towards high food prices in terms of high quality enhanced consumers willingness to buy food products with certain benefits (e.g., a health claim). Additionally, the favourable attitude towards low food prices lowered the willingness to pay estimates. This type of tendency, however, can create a possible bias in small convenient samples. In the food price-related research, it is advisable to take into account food price attitudes as possible background variables. The Food Price Attitude Scale needs further development to increase construct validity even though, in the present study, it was shown to be a reliable measure with good predictive and discriminant validity. The theoretical and managerial implications of the results for a better understanding of the role of price in consumers food purchases are discussed.