The Phraseology and Structure of Latin Building Inscriptions in Roman North Africa

This study analyses the diction of Latin building inscriptions. Despite its importance, this topic has rarely been discussed before: the most substantial contribution on the subject is a short dissertation by Klaus Gast (1965) that focuses on 100 inscriptions dating mostly from the Republican period. Marietta Horster (2001) also touched upon this theme in her thesis on imperial building inscriptions. I have collected my source material in North Africa because more Latin building inscriptions dating from the Imperial period have survived there than in any other area of the Roman Empire. By means of a thorough and independent survey, I have assembled all relevant African Latin building inscriptions datable to the Roman period (between 146 BC and AD 425), 1002 texts, into a corpus. These inscriptions are all fully edited in Appendix 1; Appendix 2 contains references to earlier editions. To facilitate search operations, both are also available in electronic form. They are downloadable from the address http://www.helsinki.fi/hum/kla/htm/jatkoopinnot.htm. Chapter one is an introduction dealing with the nature of building inscriptions as source material. Chapter two offers a statistical overview of the material. The following main section of the work falls into five chapters, each of which analyses one main part of a building inscription. An average building inscription can be divided into five parts: the starting phrase opens the inscription (a dedication to gods, for example), the subject part identifies the builder, the object part describes the constructed or repaired building, the predicate part records the building activity and the supplement part offers additional information on the project (it can specify the funding, for instance). These chapters are systematic and chronological and their purpose is to register and interpret the phrases used, to analyse reasons for their use and for their popularity among the different groups of builders. Chapter eight, which follows the main section of the work, creates a typology of building inscriptions based on their structure. It also presents the most frequently attested types of building inscriptions. The conclusion describes, on a general level, how the diction of building inscriptions developed during the period of study and how this striking development resulted from socio-economic changes that took place in Romano-African society during Antiquity. This study shows that the phraseology of building inscriptions had a clear correlation both with the type of builder and with the date of carving. Private builders tended to accentuate their participation (especially its financial side) in the project; honouring the emperor received more emphasis in the building inscriptions set up by communities; the texts produced by the army were concise. The chronological development is so clear that it enables stylistic dating. At the beginning of the imperial period the phrases were clear, concrete, formal and stereotyped but by Late Antiquity they have become vague, subjective, flexible, varied and even rhetorically or poetically coloured.

Stone Weathering in the Monastic Building Complex on Mountain of St Aaron in Petra, Jordan.

Since 1997 the Finnish Jabal Haroun Project (FJHP) has studied the ruins of the monastery and pilgrimage complex (Gr. oikos) of Aaron located on a plateau of the Mountain of Prophet Aaron, Jabal an-Nabi Harûn, ca. 5 km to the south-west of the UNESCO World Heritage site of Petra in Jordan. The state of conservation and the damaging processes affecting the stone structures of the site are studied in this M.A. thesis. The chapel was chosen as an example, as it represents the phasing and building materials of the entire site. The aim of this work is to act as a preliminary study with regards to the planning of long-term conservation at the site. The research is empirical in nature. The condition of the stones in the chapel walls was mapped using the Illustrated Glossary on Stone Deterioration, by the ICOMOS International Scientific Committee for Stone. This glossary combines several standards and systems of damage mapping used in the field. Climatic conditions (temperature and RH %) were monitored for one year (9/2005-8/2006) using a HOBO Microstation datalogger. The measurements were compared with contemporary measurements from the nearest weather station in Wadi Musa. Salts in the stones were studied by taking samples from the stone surfaces by scraping and with the “Paper Pulp”-method; with a poultice of wet cellulose fiber (Arbocel BC1000) and analyzing what main types of salts were to be found in the samples. The climatic conditions on the mountain were expected to be rapidly changing and to differ clearly from conditions in the neighboring areas. The rapid changes were confirmed, but the values did not differ as much as expected from those nearby: the 12 months monitored had average temperatures and were somewhat drier than average. Earlier research in the area has shown that the geological properties of the stone material influence its deterioration. The damage mapping showed clearly, that salts are also a major reason for stone weathering. The salt samples contained several salt combinations, whose behavior in the extremely unstable climatic conditions is difficult to predict. Detailed mapping and regular monitoring of especially the structures, that are going remain exposed, is recommended in this work.

Damp building moulds: Assessment of sensitization in patients and studies into mechanisms of airway inflammation using experimental models

Exposure to water-damaged buildings and the associated health problems have evoked concern and created confusion during the past 20 years. Individuals exposed to moisture problem buildings report adverse health effects such as non-specific respiratory symptoms. Microbes, especially fungi, growing on the damp material have been considered as potential sources of the health problems encountered in these buildings. Fungi and their airborne fungal spores contain allergens and secondary metabolites which may trigger allergic as well as inflammatory types of responses in the eyes and airways. Although epidemiological studies have revealed an association between damp buildings and health problems, no direct cause-and-effect relationship has been established. Further knowledge is needed about the epidemiology and the mechanisms leading to the symptoms associated with exposure to fungi. Two different approaches have been used in this thesis in order to investigate the diverse health effects associated with exposure to moulds. In the first part, sensitization to moulds was evaluated and potential cross-reactivity studied in patients attending a hospital for suspected allergy. In the second part, one typical mould known to be found in water-damaged buildings and to produce toxic secondary metabolites was used to study the airway responses in an experimental model. Exposure studies were performed on both naive and allergen sensitized mice. The first part of the study showed that mould allergy is rare and highly dependent on the atopic status of the examined individual. The prevalence of sensitization was 2.7% to Cladosporium herbarum and 2.8% to Alternaria alternata in patients, the majority of whom were atopic subjects. Some of the patients sensitized to mould suffered from atopic eczema. Frequently the patients were observed to possess specific serum IgE antibodies to a yeast present in the normal skin flora, Pityrosporum ovale. In some of these patients, the IgE binding was partly found to be due to binding to shared glycoproteins in the mould and yeast allergen extracts. The second part of the study revealed that exposure to Stachybotrys chartarum spores induced an airway inflammation in the lungs of mice. The inflammation was characterized by an influx of inflammatory cells, mainly neutrophils and lymphocytes, into the lungs but with almost no differences in airway responses seen between the satratoxin producing and non-satratoxin producing strain. On the other hand, when mice were exposed to S. chartarum and sensitized/challenged with ovalbumin the extent of the inflammation was markedly enhanced. A synergistic increase in the numbers of inflammatory cells was seen in BAL and severe inflammation was observed in the histological lung sections. In conclusion, the results in this thesis imply that exposure to moulds in water damaged buildings may trigger health effects in susceptible individuals. The symptoms can rarely be explained by IgE mediated allergy to moulds. Other non-allergic mechanisms seem to be involved. Stachybotrys chartarum is one of the moulds potentially responsible for health problems. In this thesis, new reaction models for the airway inflammation induced by S. chartarum have been found using experimental approaches. The immunological status played an important role in the airway inflammation, enhancing the effects of mould exposure. The results imply that sensitized individuals may be more susceptible to exposure to moulds than non-sensitized individuals.

Gender, Politics and Democratisation in Cameroon

Gender perceptions, religious belief systems, and political thought have excluded women from politics, for ages, around the world. Combining feminist and modernisation theorists in my theoretical framework, I examine the trends in patriarchal Europe and I highlight the gender-sensitive model of the Nordic countries. Retracing local gender patterns from precolonial to postcolonial eras in sub-Saharan Africa, I explore the links between perceptions, needs, resources, education and women's political participation in Cameroon. Democratisation is supposed to open up political participation, to grant equal opportunities to all adults. One ironic feature of the liberalisation process in Cameroon has been the decrease of women in parliamentarian representation (14% in 1988, 6% in 1992, 5% in 1997 and 10% in 2002). What social, cultural and institutional mechanisms produced this paradoxical outcome, the exclusion of half the population? The gender complementarity of the indigenous context has been lost to male prevalence privileged by education, church, law, employment, economy and politics in the public sphere; most women are marginalised in the private sphere. Nation building and development have failed; ethnicism and individualism are growing. Some hope lies in the growing civil society. From two surveys and 21 focus groups across Cameroon, in 2000 and 2002, some significant results of the processed empirical data reveal low electoral registration (34.5% women and 65.9% men), contrasted by the willingness to run for municipal elections (33.3 % women and 45.2% men). The co-existence of customary and statutory laws, the corrupt political system and fraudulent practices, contribute to the marginalisation of women and men who are interested in politics. A large majority of female respondents consider female politicians more trustworthy and capable than their male counterparts; they even foresee the appointment of a female Prime Minister. The Nordic countries have institutionalised gender equality in their legislation, policies and practices. France has improved women's political inclusion with the parity laws; Rwanda is another model of women's representation, thanks to its post-conflict constitution. From my analysis, Cameroonian institutions, men and more so women, may learn and borrow from these experiences, in order to design and implement a sustainable and gender-balanced democracy. Keywords: democratisation, politics, gender equality, feminism, citizenship, Cameroon, Nordic countries, Finland, France, United Kingdom, quotas, societal social psychology.

Suomalaisten yritysten vapaaehtoinen sosiaalinen vastuu : Sidosryhmäviitekehys yritysten ja ulkoisten sidosryhmien edustajien näkemyksissä

Corporate social responsibility (CSR) is no longer only an issue of companies but a concern shared by e.g. the European Union, the International Labour Organization, labour market organizations and many others. This thesis examines what kind of voluntary corporate social responsibility exceeding the minimum level set in the legislation can be expected from the Finnish companies. The research was based on the interviews of some representatives of Finnish companies and of external stakeholders. Earlier Finnish empirical research on the topic has solely analysed the stakeholder thinking and the ethics of the views of the company representatives. The views of the external stakeholders brought ht up a much more versatile perspective on the voluntary corporate social responsibility of the companies. That is the particular surplus value of this research. This research, founded on stakeholder thinking, evaluated what kind of starting points and ideas on responsibility the views of the representatives of the companies and the external stakeholders were based on the voluntary social responsibility. Furthermore, the research also investigated how their views about the corporate social responsibility indicated the benefits achieved on the cooperative actions with different partners - for example companies, communities and public administration. To fulfil the aims of the research, the following questions were used as part tasks in mapping the basic foundations and starting points expressed by the representatives of the companies and the external stakeholders: 1) How do laws, directions concerning social responsibility of companies, and opinions and demands of the stakeholders guide and affect the voluntary corporate social responsibility? 2) How can companies assume voluntary corporate social responsibility in addition to their core functions and without compromising their profitability, and how does, for example, the tightening competition affect the possibility of taking responsibility? 3) What kind of ethic and moral foundations is the corporate social responsibility based on? 4) What kind of roles can companies have in securing and promoting the well-being of citizens in Finland and on the global market as one subsystem of the society? The views on the voluntary corporate social responsibility of nine big companies, one medium-sized company and one small company, all considered responsible pioneer companies, were studied with surveys and half-structured theme interviews between 2003 and 2004. The research proceeded as a theory-bounded study. The empirical material and the previous stakeholder thinking theories (Takala 2000b, Vehkaperä 2003) guided the thesis and worked abductively in interplay with each other during the research process. (Tuomi, Sarajärvi 2002.) The aims and the methods of the research and the themes of the interviews were defined on the basis of that information. The aims of the research were surveyed qualitatively with the strategy of a multiple case study. Representatives from nine big peer companies and nine external stakeholders were interviewed with half-structured themes between 2004 and 2005. The external stakeholders and the peer companies were chosen with the "thinking" of theoretical replication by Yin, according to which the views of the representatives of those groups would differ from those of the pioneer companies and also from those of each others. The multiple case study supports analysing the internal cohesion of the views of different groups and comparing their differences, and it supports theoretical evaluation and theory-building as well. (Yin 2003.) Another reason for choosing the external stakeholders was their known cooperation with companies. The spoken argumentations of the company and stakeholder representatives on the voluntary social responsibility of the companies were analysed and interpreted in the first place with an analytic discourse analysis, and the argumentations were classified allusively into the stakeholder discourses in three of the part tasks. In the discourse analysis, argumentations of the speech is seen to be intervowen with cultural meanings. (Jokinen, Juhila 1999.) The views of the representatives of the pioneer companies and the external stakeholders were more stakeholder-orientated than the views of the representatives of the peer companies. For the most part, the voluntary corporate social responsibility was seemingly targeted on single, small cooperation projects of the companies and external stakeholders. The pioneer companies had more of those projects, and they were participating in the projects more actively than the peer companies were. The significant result in this research was the notion that, in particular, the representatives of the pioneer companies and external stakeholders did not consider employing and paying taxes to be enough of reciprocal corporate social responsibility. However, they still wanted to preserve the Finnish welfare model, and the interviewees did not wish major changes in the present legislation or the social agreements. According to this study, the voluntary corporate social responsibility is motivated by ethical utilitarianism which varied from very narrow to very wide in relation to benefits achieved by companies and stakeholders (Velasquez 2002, Lagerspetz 2004). Compared with the peer companies, more of the representatives of the pioneer companies and of external stakeholders estimated that companies in their decision-making and operations considered not only the advantages and the benefits of the owners and other internal stakeholders, but also those of the external stakeholders and of the whole society. However, all interviewees expressed more or less strongly that the economic responsibility guides the voluntary responsible actions of the companies in the first place. This kind of utilitarian foundation of behaviour appeared from this research was named as business-orientated company moral. This thesis also presents a new voluntary corporate social responsibility model with four variables on the stakeholder discourses and their distinctive characteristics. The utilitarian motivation of a company s behaviour on their operations has been criticized on the grounds that the end justifies the means. It has also been stated that it is impossible to evaluate the benefits of the utilitarian type of actions to the individuals and the society. It is expected however that companies for their part promote the material and immaterial well-being of the individuals on the global, national and local markets. The expectations are so strong that if companies do not take into account the ethical and moral values, they can possibly suffer significant financial losses. All stakeholders, especially consumers, can with their own choices promote the responsible behaviour of the companies. Key words: voluntary corporate social responsibility, external stakeholders, corporate citizenship, ethics and morality, utilitarianism, stakeholder discourses, welfare society, globalisation

The proposed gun laws are not enough

Argues that as a more effective precuationary measure, it would seem that the firearms revocation threshold should be substantially lowered, or at least further clarified in guidance. Response to public debate in light of school shootings.

Global and EU governance for sustainable forest management with special reference to capacity building in Ethiopia and Southern Sudan

The purpose of this study was to produce information on and practical recommendations for informed decision-making on and capacity building for sustainable forest management (SFM) and good forest governance. This was done within the overall global framework for sustainable development with special emphasis on the EU and African frameworks and on Southern Sudan and Ethiopia in particular. The case studies on Southern Sudan and Ethiopia focused on local, national and regional issues. Moreover, this study attempted to provide both theoretical and practical new insight. The aim was to build an overall theoretical framework and to study its key contents and main implications for SFM and good forest governance at all administration levels, for providing new tools for capacity building in natural resources management. The theoretical framework and research approach were based on the original research problem and the general and specific aims of the study. The key elements of the framework encompass sustainable development, global and EU governance, sustainable forest management (SFM), good forest governance, as well as international and EU law. The selected research approach comprised matrix-based assessment of international, regional (EU and Africa) and national (Southern Sudan and Ethiopia) policy and legal documents. The specific case study on Southern Sudan also involved interviews and group discussions with local community members and government officials. As a whole, this study attempted to link the global, regional, national and local levels in forest-sector development and especially to analyse how the international policy development in environmental and forestry issues is reflected in field-level progress towards SFM and good forest governance, for the specific cases of Southern Sudan and Ethiopia. The results on Southern Sudan focused on the existing situation and perceived needs in capacity building for SFM and good forest governance at all administration levels. Specifically, the results of the case study on Southern Sudan presented the current situation in selected villages in the northern parts of Renk County in Upper Nile State, and the implications of Multilateral Environmental Agreements (MEAs) and of the new forest policy framework for capacity building actions. The results on Ethiopia focused on training, extension, research, education and new curriculum development within higher education institutions and particularly at the Wondo Genet College of Forestry and Natural Resources (WGCF-NR), which administratively lies under Hawassa University. The results suggest that, for both cases studies, informed decision-making on and capacity building for SFM and good forest governance require comprehensive, long-term, cross-sectoral, coherent and consistent approaches within the dynamic and evolving overall global framework, including its multiple inter-linked levels. The specific priority development and focus areas comprised the establishment of SFM and good forest governance in accordance with the overall sustainable development priorities and with more focus on the international trade in forest products that are derived from sustainable and legal sources with an emphasis on effective forest law enforcement and governance at all levels. In Upper Nile State in Southern Sudan there were positive development signals such as the will of the local people to plant more multipurpose trees on farmlands and range lands as well as the recognition of the importance of forests and trees for sustainable rural development where food security is a key element. In addition, it was evident that the local communities studied in Southern Sudan also wanted to establish good governance systems through partnerships with all actors and through increased local responsibilities. The results also suggest that the implementation of MEAs at the local level in Southern Sudan requires mutually supportive and coherent approaches within the agreements as well as significantly more resources and financial and technical assistance for capacity building, training and extension. Finally, the findings confirm the importance of full utilization of the existing local governance and management systems and their traditional and customary knowledge and practices, and of new development partnerships with full participation of all stakeholders. The planned new forest law for Southern Sudan, based on an already existing new forest policy, is expected to recognize the roles of local-level actors, and it would thus obviously facilitate the achieving of sustainable forest management.

A model Integrating the Facilities Management Process with the Building End User’s Business Process (ProFacil)

The ProFacil model is a generic process model defined as a framework model showing the links between the facilities management process and the building end user’s business process. The purpose of using the model is to support more detailed process modelling. The model has been developed using the IDEF0 modelling method. The ProFacil model describes business activities from the generalized point of view as management-, support-, and core processes and their relations. The model defines basic activities in the provision of a facility. Examples of these activities are “operate facilities”, “provide new facilities”, “provide re-build facilities”, “provide maintained facilities” and “perform dispose of facilities”. These are all generic activities providing a basis for a further specialisation of company specific FM activities and their tasks. A facilitator can establish a specialized process model using the ProFacil model and interacting with company experts to describe their company’s specific processes. These modelling seminars or interviews will be done in an informal way, supported by the high-level process model as a common reference.

Building Information Modelling – Experts´ Views on Standardisation and Industry Deployment

The goal of the single building information model has existed for at least thirty years and various standards have been published leading up to the ten-year development of the Industry Foundation Classes. These have been initiatives from researchers, software developers and standards committees. Now large property owners are becoming aware of the benefits of moving IT tools from specific applications towards more comprehensive solutions. This study addresses the state of Building Information Models and the conditions necessary for them to become more widely used. It is a qualitative study based on information from a number of international experts and has asked a series of questions about the feasibility of BIMs, the conditions necessary for their success, and the role of standards with particular reference to the IFCs. Some key statements were distilled from the diverse answers received and indicate that BIM solutions appear too complex for many and may need to be applied in limited areas initially. Standards are generally supported but not applied rigorously and a range of these are relevant to BIM. Benefits will depend upon the building procurement methods used and there should be special roles within the project team to manage information. Case studies are starting to appear and these could be used for publicity. The IFCs are rather oversold and their complexities should be hidden within simple-to-use software. Inevitably major questions remain and property owners may be the key to answering some of these. A framework for presenting standards, backed up by case studies of successful projects, is the solution proposed to provide better information on where particular BIM standards and solutions should be applied in building projects.

ISO 13567 - The Proposed International Standard for Structuring Layers in Computer Aided Building Design

Layering is a widely used method for structuring data in CAD-models. During the last few years national standardisation organisations, professional associations, user groups for particular CAD-systems, individual companies etc. have issued numerous standards and guidelines for the naming and structuring of layers in building design. In order to increase the integration of CAD data in the industry as a whole ISO recently decided to define an international standard for layer usage. The resulting standard proposal, ISO 13567, is a rather complex framework standard which strives to be more of a union than the least common denominator of the capabilities of existing guidelines. A number of principles have been followed in the design of the proposal. The first one is the separation of the conceptual organisation of information (semantics) from the way this information is coded (syntax). The second one is orthogonality - the fact that many ways of classifying information are independent of each other and can be applied in combinations. The third overriding principle is the reuse of existing national or international standards whenever appropriate. The fourth principle allows users to apply well-defined subsets of the overall superset of possible layernames. This article describes the semantic organisation of the standard proposal as well as its default syntax. Important information categories deal with the party responsible for the information, the type of building element shown, whether a layer contains the direct graphical description of a building part or additional information needed in an output drawing etc. Non-mandatory information categories facilitate the structuring of information in rebuilding projects, use of layers for spatial grouping in large multi-storey projects, and storing multiple representations intended for different drawing scales in the same model. Pilot testing of ISO 13567 is currently being carried out in a number of countries which have been involved in the definition of the standard. In the article two implementations, which have been carried out independently in Sweden and Finland, are described. The article concludes with a discussion of the benefits and possible drawbacks of the standard. Incremental development within the industry, (where ”best practice” can become ”common practice” via a standard such as ISO 13567), is contrasted with the more idealistic scenario of building product models. The relationship between CAD-layering, document management product modelling and building element classification is also discussed.

Use of Standards for CAD Layers in Building

One of the central issues in making efficient use of IT in the design, construction and maintenance of buildings is the sharing of the digital building data across disciplines and lifecycle stages. One technology which enables data sharing is CAD layering, which to be of real use requires the definition of standards. This paper focuses on the background, objectives and effectiveness of the International standard ISO 13567, Organisation and naming of layers for CAD. In particular the efficiency and effectiveness of the standardisation and standard implementation process are in focus, rather than the technical details. The study was conducted as a qualitative study with a number of experts who responded to a semi-structured mail questionnaire, supplemented by personal interviews. The main results were that CAD layer standards based on the ISO standard have been implemented, particularly in northern European countries, but are not very widely used. A major problem which was identified was the lack of resources for marketing and implementing the standard as national variations, once it had been formally accepted.

The international match: Metaphors as vehicles of social identity building in cross-border mergers

This article focuses on cultural identity-building in the cross-border merger context. To provide an alternative to the dominant essentialist analyses of cultures and cultural differences, cultural identitybuilding is conceptualized as a metaphoric process. The focus is on two processes inherent in the cross-border merger context: construction of images of Us and Them and construction of images of a Common Future. Based on an analysis of a special metaphor exercise carried out in a recent Finnish–Swedish merger, the article illustrates how the metaphoric perspective reveals specific cognitive, emotional and political aspects of cultural identity-building that easily remain ‘hidden’ in the case of more traditional approaches.