Work Stress and Early Atherosclerosis: Do Genetic Background and Pre-Employment Risk Factors Explain Conflicting Findings?

According to the models conceptualizing work stress, increased risk of health problems arise when high job demands co-occur with low job control (the demand-control model) or the efforts invested by the employee are disproportionately high compared to the rewards received (effort-reward imbalance model). This study examined the association between work stress and early atherosclerosis with particular attention to the role of pre-employment risk factors and genetic background in this association. The subjects were young healthy adults aged 24-39 who were participating in the 21-year follow-up of the ongoing prospective "Cardiovascular Risk in Young Finns" study in 2001-2002. Work stress was evaluated with questionnaires on demand-control model and on effort-reward model. Atherosclerosis was assessed with ultrasound of carotid artery intima-media thickness (IMT). In addition, risk for enhanced atherosclerotic process was assessed by measuring with heart rate variability and heart rate. Pre-employment risk factors, measured at age 12 to 18, included such as body mass index, blood lipids, family history of coronary heart disease, and parental socioeconomic position. Variants of the neuregulin-1 were determined using genomic DNA. The results showed that higher work stress was associated with higher IMT in men. This association was not attenuated by traditional risk factors of atherosclerosis and coronary heart disease or by pre-employment risk factors measured in adolescence. Neuregulin-1 gene moderated the association between work stress and IMT in men. A significant association between work stress and IMT was found only for the T/T genotype of the neuregulin-1 gene but not for other genotypes. Among women an association was found between higher work stress and lower heart rate variability, suggesting higher risk for developing atherosclerosis. These associations could not be explained by demographic characteristics or coronary risk factors. The present findings provide evidence for an association between work stress and atherosclerosis in relatively young population. This association seems to be modified by genetic influences but it does not appear to be confounded by pre-employment adolescent risk factors.

Cortinarius subgenus Telamonia p.p. in North Europe

Cortinarius is the largest genus of Agaricales with a worldwide distribution. So far, over 4000 Cortinarius names and combinations have been published. Cortinarius spp. form ectomycorrhizae with different trees and shrubs. A majority of the Cortinarius species have narrow ecological preferences and many form ectomycorrhiza with only one or few host species. The subgenus Telamonia sensu lato (s. lat.), comprising the greatest number of species, is the most poorly known of the subgenera of Cortinarius. The centre of diversity is in the northern hemisphere, although some species of the group are also recognized in the southern hemisphere. The aim of this thesis was to study the taxonomy of Cortinarius subgenus Telamonia p.p. species based on morphological and molecular data, as well as to study the ecology and distribution of the species in North Europe. The taxonomical problems encountered and the difficulty in finding and studying all the relevant names and types slowed down the study. The diversity of the subgenus Telamonia s. lat. in North Europe (excluding sect. Hydrocybe, Icrustati and Anomali) was found to be far greater than previously thought. Even many of the common species have not yet been described. So far, ca. 200 species have been recognised from the Nordic countries, but the sampling in most groups does not cover the whole diversity and especially the southern deciduous forest species are underrepresented in our study. In most cases phylogenetic (only based on ITS data) and morphological species recognition were in concordance, but in a few cases morphologically delimited species had almost identical ITS sequences, raising the question as to whether ITS is always variable enough for species recognition. The opposite situation, in which a morphologically uniform species included two phylogenetically distinct lineages, however, was also encountered, suggesting the possibility of cryptic species in Cortinarius. In our studies no taxa below species level were recognised and the aforementioned results indicate that presumably they can only be recognised genetically. Based on our preliminary results a revision of the infrageneric classification in Cortinarius subgenus Telamonia s. lat. is needed, and more sections should be established for a meaningful and functional classification. Many groups have turned out to be artificial, and it seems evident that many characteristics have been over- or underemphasised. Many morphological characteristics, however, are useful in the identification of telamonioid species and e.g. some spore characteristics have often been overlooked. Our studies have concentrated on North Europe, but we have found some similarities with North European and North American taxa.

The Problem of Implementation and its Relation to the Philosophy of Cognitive Science

According to certain arguments, computation is observer-relative either in the sense that many physical systems implement many computations (Hilary Putnam), or in the sense that almost all physical systems implement all computations (John Searle). If sound, these arguments have a potentially devastating consequence for the computational theory of mind: if arbitrary physical systems can be seen to implement arbitrary computations, the notion of computation seems to lose all explanatory power as far as brains and minds are concerned. David Chalmers and B. Jack Copeland have attempted to counter these relativist arguments by placing certain constraints on the definition of implementation. In this thesis, I examine their proposals and find both wanting in some respects. During the course of this examination, I give a formal definition of the class of combinatorial-state automata , upon which Chalmers s account of implementation is based. I show that this definition implies two theorems (one an observation due to Curtis Brown) concerning the computational power of combinatorial-state automata, theorems which speak against founding the theory of implementation upon this formalism. Toward the end of the thesis, I sketch a definition of the implementation of Turing machines in dynamical systems, and offer this as an alternative to Chalmers s and Copeland s accounts of implementation. I demonstrate that the definition does not imply Searle s claim for the universal implementation of computations. However, the definition may support claims that are weaker than Searle s, yet still troubling to the computationalist. There remains a kernel of relativity in implementation at any rate, since the interpretation of physical systems seems itself to be an observer-relative matter, to some degree at least. This observation helps clarify the role the notion of computation can play in cognitive science. Specifically, I will argue that the notion should be conceived as an instrumental rather than as a fundamental or foundational one.

Porsastuotannon tuottavuuskehitys sikatilinpäätöstiloilla vuosina 2003–2008

Tutkimuksessa mitataan porsastuotannon tuottavuuden kehitystä ProAgrian sikatilinpäätöstiloilla vuosina 2003–2008. Tuottavuutta mitataan Fisher-tuottavuusindeksillä, joka dekomponoidaan tekniseen, allokatiiviseen ja skaalatehokkuuteen sekä teknologiseen kehitykseen ja hintavaikutukseen. Koko aineistosta aggregoidulla tuottavuusindeksillä mitattuna tuottavuus kasvoi viidessä vuodessa yhteensä 14,3 % vuotuisen kasvun ollessa 2,7 %. Tuottajien keskimääräinen tuottavuusindeksi antaa lähes saman tuloksen: sen mukaan tuottavuus kasvaa yhteensä 14,7 %, mikä tekee 2,8 % vuodessa. Skaalatehokkuuden paraneminen havaitaan merkittävimmäksi tuottavuuskasvun lähteeksi. Skaalatehokkuus paranee aggregoidusti mitattuna 1,6 % vuodessa ja tiloilla keskimäärin 2,1 % vuodessa. Teknisen tehokkuuden koheneminen on toinen tuottavuuskasvua edistävä tekijä tutkimusjaksolla. Molemmilla mittaustavoilla nousu on keskimäärin 1,4 % vuodessa. Allokatiivinen tehokkuus laskee hieman: aggregoidusti mitattuna 0,1 % ja keskimäärin 0,4 % vuodessa. Teknologinen kehitys tutkimusjaksolla on lievästi negatiivista, keskimäärin -0,1 % vuodessa. Vuosittaiset vaihtelut ovat kuitenkin voimakkaita. Hintojen muutokset eivät juuri ole vaikuttaneet tuottavuuden tasoon, sillä hintavaikutuksen vuotuiset muutokset jäävät jokaisena vuonna alle puoleen prosenttiin ja keskimääräinen vuotuinen muutos on -0,1 %. Keskeinen tuottavuuskasvua edistänyt tekijä näyttää olleen tilakoon kasvu, joka on parantanut rakenteellista tehokkuutta. Teknologisen kehityksen jääminen negatiiviseksi kuitenkin tarkoittaa, että paras havaittu tuottavuuden taso ei ole noussut lainkaan.

Root system traits of Norway spruce, Scots pine, and silver birch in mixed boreal forests: an analysis of root architecture, morphology, and anatomy

The aim of this thesis was to unravel the functional-structural characteristics of root systems of Betula pendula Roth., Picea abies (L.) Karst., and Pinus sylvestris L. in mixed boreal forest stands differing in their developmental stage and site fertility. The root systems of these species had similar structural regularities: horizontally-oriented shallow roots defined the horizontal area of influence, and within this area, each species placed fine roots in the uppermost soil layers, while sinker roots defined the maximum rooting depth. Large radial spread and high ramification of coarse roots, and the high specific root length (SRL) and root length density (RLD) of fine roots indicated the high belowground competitiveness and root plasticity of B. pendula. Smaller radial root spread and sparser branching of coarse roots, and low SRL and RLD of fine roots of the conifers could indicate their more conservative resource use and high association with and dependence on ectomycorrhiza-forming fungi. The vertical fine root distributions of the species were mostly overlapping, implying the possibility for intense belowground competition for nutrients. In each species, conduits tapered and their frequency increased from distal roots to the stem, from the stem to the branches, and to leaf petioles in B. pendula. Conduit tapering was organ-specific in each species violating the assumptions of the general vascular scaling model (WBE). This reflects the hierarchical organization of a tree and differences between organs in the relative importance of transport, safety, and mechanical demands. The applied root model was capable of depicting the mass, length and spread of coarse roots of B. pendula and P. abies, and to the lesser extent in P. sylvestris. The roots did not follow self-similar fractal branching, because the parameter values varied within the root systems. Model parameters indicate differences in rooting behavior, and therefore different ecophysiological adaptations between species.

Automatic Lameness Detection in a Milking Robot : Instrumentation, measurement software, algorithms for data analysis and a neural network model

The aim of this thesis is to develop a fully automatic lameness detection system that operates in a milking robot. The instrumentation, measurement software, algorithms for data analysis and a neural network model for lameness detection were developed. Automatic milking has become a common practice in dairy husbandry, and in the year 2006 about 4000 farms worldwide used over 6000 milking robots. There is a worldwide movement with the objective of fully automating every process from feeding to milking. Increase in automation is a consequence of increasing farm sizes, the demand for more efficient production and the growth of labour costs. As the level of automation increases, the time that the cattle keeper uses for monitoring animals often decreases. This has created a need for systems for automatically monitoring the health of farm animals. The popularity of milking robots also offers a new and unique possibility to monitor animals in a single confined space up to four times daily. Lameness is a crucial welfare issue in the modern dairy industry. Limb disorders cause serious welfare, health and economic problems especially in loose housing of cattle. Lameness causes losses in milk production and leads to early culling of animals. These costs could be reduced with early identification and treatment. At present, only a few methods for automatically detecting lameness have been developed, and the most common methods used for lameness detection and assessment are various visual locomotion scoring systems. The problem with locomotion scoring is that it needs experience to be conducted properly, it is labour intensive as an on-farm method and the results are subjective. A four balance system for measuring the leg load distribution of dairy cows during milking in order to detect lameness was developed and set up in the University of Helsinki Research farm Suitia. The leg weights of 73 cows were successfully recorded during almost 10,000 robotic milkings over a period of 5 months. The cows were locomotion scored weekly, and the lame cows were inspected clinically for hoof lesions. Unsuccessful measurements, caused by cows standing outside the balances, were removed from the data with a special algorithm, and the mean leg loads and the number of kicks during milking was calculated. In order to develop an expert system to automatically detect lameness cases, a model was needed. A probabilistic neural network (PNN) classifier model was chosen for the task. The data was divided in two parts and 5,074 measurements from 37 cows were used to train the model. The operation of the model was evaluated for its ability to detect lameness in the validating dataset, which had 4,868 measurements from 36 cows. The model was able to classify 96% of the measurements correctly as sound or lame cows, and 100% of the lameness cases in the validation data were identified. The number of measurements causing false alarms was 1.1%. The developed model has the potential to be used for on-farm decision support and can be used in a real-time lameness monitoring system.

From environmental concerns towards sustainable food provisioning. : Material flow and food consumption scenario studies on sustainability of agri-food systems

Agriculture is an economic activity that heavily relies on the availability of natural resources. Through its role in food production agriculture is a major factor affecting public welfare and health, and its indirect contribution to gross domestic product and employment is significant. Agriculture also contributes to numerous ecosystem services through management of rural areas. However, the environmental impact of agriculture is considerable and reaches far beyond the agroecosystems. The questions related to farming for food production are, thus, manifold and of great public concern. Improving environmental performance of agriculture and sustainability of food production, sustainabilizing food production, calls for application of wide range of expertise knowledge. This study falls within the field of agro-ecology, with interphases to food systems and sustainability research and exploits the methods typical of industrial ecology. The research in these fields extends from multidisciplinary to interdisciplinary and transdisciplinary, a holistic approach being the key tenet. The methods of industrial ecology have been applied extensively to explore the interaction between human economic activity and resource use. Specifically, the material flow approach (MFA) has established its position through application of systematic environmental and economic accounting statistics. However, very few studies have applied MFA specifically to agriculture. The MFA approach was used in this thesis in such a context in Finland. The focus of this study is the ecological sustainability of primary production. The aim was to explore the possibilities of assessing ecological sustainability of agriculture by using two different approaches. In the first approach the MFA-methods from industrial ecology were applied to agriculture, whereas the other is based on the food consumption scenarios. The two approaches were used in order to capture some of the impacts of dietary changes and of changes in production mode on the environment. The methods were applied at levels ranging from national to sector and local levels. Through the supply-demand approach, the viewpoint changed between that of food production to that of food consumption. The main data sources were official statistics complemented with published research results and expertise appraisals. MFA approach was used to define the system boundaries, to quantify the material flows and to construct eco-efficiency indicators for agriculture. The results were further elaborated for an input-output model that was used to analyse the food flux in Finland and to determine its relationship to the economy-wide physical and monetary flows. The methods based on food consumption scenarios were applied at regional and local level for assessing feasibility and environmental impacts of relocalising food production. The approach was also used for quantification and source allocation of greenhouse gas (GHG) emissions of primary production. GHG assessment provided, thus, a means of crosschecking the results obtained by using the two different approaches. MFA data as such or expressed as eco-efficiency indicators, are useful in describing the overall development. However, the data are not sufficiently detailed for identifying the hot spots of environmental sustainability. Eco-efficiency indicators should not be bluntly used in environmental assessment: the carrying capacity of the nature, the potential exhaustion of non-renewable natural resources and the possible rebound effect need also to be accounted for when striving towards improved eco-efficiency. The input-output model is suitable for nationwide economy analyses and it shows the distribution of monetary and material flows among the various sectors. Environmental impact can be captured only at a very general level in terms of total material requirement, gaseous emissions, energy consumption and agricultural land use. Improving environmental performance of food production requires more detailed and more local information. The approach based on food consumption scenarios can be applied at regional or local scales. Based on various diet options the method accounts for the feasibility of re-localising food production and environmental impacts of such re-localisation in terms of nutrient balances, gaseous emissions, agricultural energy consumption, agricultural land use and diversity of crop cultivation. The approach is applicable anywhere, but the calculation parameters need to be adjusted so as to comply with the specific circumstances. The food consumption scenario approach, thus, pays attention to the variability of production circumstances, and may provide some environmental information that is locally relevant. The approaches based on the input-output model and on food consumption scenarios represent small steps towards more holistic systemic thinking. However, neither one alone nor the two together provide sufficient information for sustainabilizing food production. Environmental performance of food production should be assessed together with the other criteria of sustainable food provisioning. This requires evaluation and integration of research results from many different disciplines in the context of a specified geographic area. Foodshed area that comprises both the rural hinterlands of food production and the population centres of food consumption is suggested to represent a suitable areal extent for such research. Finding a balance between the various aspects of sustainability is a matter of optimal trade-off. The balance cannot be universally determined, but the assessment methods and the actual measures depend on what the bottlenecks of sustainability are in the area concerned. These have to be agreed upon among the actors of the area

Systems between information and knowledge : In a memory management model of an extended enterprise

The research question of this thesis was how knowledge can be managed with information systems. Information systems can support but not replace knowledge management. Systems can mainly store epistemic organisational knowledge included in content, and process data and information. Certain value can be achieved by adding communication technology to systems. All communication, however, can not be managed. A new layer between communication and manageable information was named as knowformation. Knowledge management literature was surveyed, together with information species from philosophy, physics, communication theory, and information system science. Positivism, post-positivism, and critical theory were studied, but knowformation in extended organisational memory seemed to be socially constructed. A memory management model of an extended enterprise (M3.exe) and knowformation concept were findings from iterative case studies, covering data, information and knowledge management systems. The cases varied from groups towards extended organisation. Systems were investigated, and administrators, users (knowledge workers) and managers interviewed. The model building required alternative sets of data, information and knowledge, instead of using the traditional pyramid. Also the explicit-tacit dichotomy was reconsidered. As human knowledge is the final aim of all data and information in the systems, the distinction between management of information vs. management of people was harmonised. Information systems were classified as the core of organisational memory. The content of the systems is in practice between communication and presentation. Firstly, the epistemic criterion of knowledge is not required neither in the knowledge management literature, nor from the content of the systems. Secondly, systems deal mostly with containers, and the knowledge management literature with applied knowledge. Also the construction of reality based on the system content and communication supports the knowformation concept. Knowformation belongs to memory management model of an extended enterprise (M3.exe) that is divided into horizontal and vertical key dimensions. Vertically, processes deal with content that can be managed, whereas communication can be supported, mainly by infrastructure. Horizontally, the right hand side of the model contains systems, and the left hand side content, which should be independent from each other. A strategy based on the model was defined.