DNA-based detection and characterisation of strictly anaerobic beer-spoilage bacteria

Megasphaera cerevisiae, Pectinatus cerevisiiphilus, Pectinatus frisingensis, Selenomonas lacticifex, Zymophilus paucivorans and Zymophilus raffinosivorans are strictly anaerobic Gram-stain-negative bacteria that are able to spoil beer by producing off-flavours and turbidity. They have only been isolated from the beer production chain. The species are phylogenetically affiliated to the Sporomusa sub-branch in the class "Clostridia". Routine cultivation methods for detection of strictly anaerobic bacteria in breweries are time-consuming and do not allow species identification. The main aim of this study was to utilise DNA-based techniques in order to improve detection and identification of the Sporomusa sub-branch beer-spoilage bacteria and to increase understanding of their biodiversity, evolution and natural sources. Practical PCR-based assays were developed for monitoring of M. cerevisiae, Pectinatus species and the group of Sporomusa sub-branch beer spoilers throughout the beer production process. The developed assays reliably differentiated the target bacteria from other brewery-related microbes. The contaminant detection in process samples (10 1,000 cfu/ml) could be accomplished in 2 8 h. Low levels of viable cells in finished beer (≤10 cfu/100 ml) were usually detected after 1 3 d culture enrichment. Time saving compared to cultivation methods was up to 6 d. Based on a polyphasic approach, this study revealed the existence of three new anaerobic spoilage species in the beer production chain, i.e. Megasphaera paucivorans, Megasphaera sueciensis and Pectinatus haikarae. The description of these species enabled establishment of phenotypic and DNA-based methods for their detection and identification. The 16S rRNA gene based phylogenetic analysis of the Sporomusa sub-branch showed that the genus Selenomonas originates from several ancestors and will require reclassification. Moreover, Z. paucivorans and Z. raffinosivorans were found to be in fact members of the genus Propionispira. This relationship implies that they were carried to breweries along with plant material. The brewery-related Megasphaera species formed a distinct sub-group that did not include any sequences from other sources, suggesting that M. cerevisiae, M. paucivorans and M. sueciensis may be uniquely adapted to the brewery ecosystem. M. cerevisiae was also shown to exhibit remarkable resistance against many brewery-related stress conditions. This may partly explain why it is a brewery contaminant. This study showed that DNA-based techniques provide useful tools for obtaining more rapid and specific information about the presence and identity of the strictly anaerobic spoilage bacteria in the beer production chain than is possible using cultivation methods. This should ensure financial benefits to the industry and better product quality to customers. In addition, DNA-based analyses provided new insight into the biodiversity as well as natural sources and relations of the Sporomusa sub-branch bacteria. The data can be exploited for taxonomic classification of these bacteria and for surveillance and control of contaminations.

Molecular phylogeny of Archaea in boreal forest soil, freshwater and temperate estuarine sediment

Suurin osa luonnossa havaitsemistamme mikrobeista on sellaisia, joita emme edelleenkään osaa kasvattaa laboratorio-oloissa, vaikka tietomme mikrobien monimuotoisuudesta paranevat koko ajan. Luonnontilaisen mikrobieliöstön kokoonpano eri ympäristöissä on paljolti epäselvä ja ymmärrämme vielä hyvin puutteellisesti mikrobien ekologiaa ja niiden rooleja eliöyhteisöissä. Nykyaikaiset molekulaariset tutkimusmenetelmät auttavat selvittämään mikrobien monimuotoisuutta kokonaisvaltaisesti ja nopeasti. Ympäristöstä kemiallisesti puhdistetut ribosomaalista RNA:ta koodaavat geenit edustavat periaatteessa kaikkia eliöyhteisön geneettisesti toisistaan poikkeavia eliöitä. Niistä voidaan valikoida halutut genomit jatkotutkimuksia varten. Uusien menetelmien käyttö on tuonut esiin sen merkittävän seikan, että "tavanomaisten" elinympäristöjen eliöyhteisöihin kuuluu suuri joukko entuudestaan tuntemattomia arkkieliöitä. Aiemmin kuviteltiin, että arkkieliöt asuttavat vain sellaisia "epätavallisia" tai "äärimmäisiä" elinympäristöjä, joita luonnehtii joku seuraavista ominaisuuksista: hyvin korkea lämpötila, korkea suolapitoisuus, korkea happamuus tai emäksisyys, hapettomuus. Tutkijat ovat viimeisen noin kymmenen vuoden aikana osoittaneet, että arkkieliöt asuttavat hyvin monenlaisia kylmän ja lauhkean vyöhykkeen ympäristöjä, yhtä hyvin maaperää kuin suolaisen ja makean veden pohjaa tai pintakerroksia. Nämä löydöt ovat avanneet uuden alun arkkieliöiden tutkimukselle, erityisesti sen selvittämiselle, mitkä ovat niiden fysiologiset ja ekologiset roolit monimuotoisissa mikrobiyhteisöissä. Tämä väitöskirja kuvaa entuudestaan tuntemattomien arkkieliöiden löytymistä havumetsävyöhykkeen metsämaasta. Arkkieliöitä löytyi myös lauhkean vyöhykkeen vuorovesialueelta, murtoveden huuhtelemasta pohjasta. Nämä löydöt ovat perustavalaatuisia vuorovesialueen eliöyhteisöjen ymmärtämiseksi. Suomalaisen metsäjärven vedestä määritettiin molempien arkkieliöiden pääryhmien - tieteellisiltä nimiltään Crenarchaeota ja Euryarchaeota - edustajia. Euryarchaeota-ryhmän edustajia voitiin havainnoida myös fluoresenssi-mikroskopoinnilla. Löydöt viittaavat siihen, että arkkieliöillä on oma biogeokemiallinen roolinsa makeanveden ravintoketjujen hiilen käytössä. Tässä työssä määritetyt uudet arkkieliöiden genomien nukleotidisekvenssit on toimitettu ARB-tietokantaan, jonka kasvava vertailuaineisto edelleen parantaa uusien arkkieliösekvenssien analyysiä ja auttaa hybridisaatiokoetinten ja polymeraasiketjureaktioalukkeiden suunnittelussa ja arvioinnissa. Tässä väitöskirjassa esitellyt tulokset yhdessä lukuisien vesi-, maaperä- ja muiden ympäristöjen arkkieliöitä käsittelevien julkaisujen kanssa osoittavat, että arkkieliöt asuttavat monia erilaisia elinympäristöjä ja että ne ovat ekologisesti paljon menestyneempiä, kuin tieteenalalla on kuviteltu. Voimme olettaa, että heti kun joitain näistä eliöistä onnistutaan kasvattamaan ja ylläpitämään laboratorio-oloissa, niiden joukosta löydetään aivan uusia, entuudestaan tuntemattomia fysiologisia fenotyyppejä, jotka avaavat mielenkiintoisia näkymiä aineenvaihdunnan ja perinnöllisten ominaisuuksien tutkimukselle.

Preparation, structural analysis and prebiotic potential of arabinoxylo-oligosaccharides

Arabinoxylo-oligosaccharides (AXOS) can be prepared enzymatically from arabinoxylans (AX) and AXOS are known to possess prebiotic potential. Here the structural features of 10 cereal AX were examined. AX were hydrolysed by Shearzyme® to prepare AXOS, and their structures were fully analysed. The prebiotic potential of the purified AXOS was studied in the fermentation experiments with bifidobacteria and faecal microbiota. In AX extracted from flours and bran, high amounts of a-L-Araf units are attached to the b-D-Xylp main chain, whereas moderate or low degree of substitution was found from husks, cob and straw. Nuclear magnetic resonance (NMR) spectroscopy showed that flour and bran AX contain high amounts of a-L-Araf units bound to the O-3 of b-D-Xylp residues and doubly substituted b-D-Xylp units with a-L-Araf substituents at O-2 and O-3. Barley husk and corn cob AX contain high amounts of b-D-Xylp(1→2)-a-L-Araf(1→3) side chains, which can also be found in AX from oat spelts and rice husks, and in lesser amounts in wheat straw AX. Rye and wheat flour AX and oat spelt AX were hydrolysed by Shearzyme® (with Aspergillus aculeatus GH10 endo-1,4-b-D-xylanase as the main enzyme) for the production of AXOS on a milligram scale. The AXOS were purified and their structures fully analysed, using mass spectrometry (MS) and 1D and 2D NMR spectroscopy. Monosubstituted xylobiose and xylotriose with a-L-Araf attached to the O-3 or O-2 of the nonreducing end b-D-Xylp unit and disubstituted AXOS with two a-L-Araf units at the nonreducing end b-D-Xylp unit of xylobiose or xylotriose were produced. Xylobiose with b-D-Xylp(1→2)-a-L-Araf(1→3) side chain was also purified. These AXOS were used as standards in further identification and quantification of corresponding AXOS from the hydrolysates in high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) analysis. The prebiotic potential of AXOS was tested in in vitro fermentation experiments. Bifidobacterium adolescentis ATCC 15703 and B. longum ATCC 15707 utilized AXOS from the AX hydrolysates. Both species released L-arabinose from AXOS, but B. adolescentis consumed the XOS formed, whereas B. longum fermented the L-arabinose released. The third species tested, B. breve ATCC 15700, grew poorly on these substrates. When cultivated on pure AXOS, the bifidobacterial mixture utilized pure singly substituted AXOS almost completely, but no growth was detected with pure doubly substituted AXOS as substrates. However, doubly substituted AXOS were utilized from the mixture of xylose, XOS and AXOS. Faecal microbiota utilized both pure singly and doubly substituted AXOS. Thus, a mixture of singly and doubly substituted AXOS could function as a suitable, slowly fermenting prebiotic substance. This thesis contributes to the structural information on cereal AX and preparation of mono and doubly substituted AXOS from AX. Understanding the utilization strategies is fundamental in evaluating the prebiotic potential of AXOS. Further research is still required before AXOS can be used in applications for human consumption.

Factors affecting farmland prices in Finland

The purpose of the study was to analyse factors affecting the differences in land prices between regions. The key issue was to find out the policy effects on farmland prices. In addition to comprehensive literature review, a theoretical analysis as well as modern panel and spatial econometric techniques were utilized. The study clearly pointed out the importance of taking into account the possible spatial dependence. The data were exceptionally large, comprising more than 6 000 observations. Thus, it allowed a thorough econometric estimation including the possibility to take into account the spatial nature of the data. This study supports the view that there are many other factors that affect farmland prices besides pure agricultural returns. It was also found that the support clearly affects land prices. However, rather than assuming the discount rates for support and market returns to be similar, the rough analysis refers to the discount rate for support being a little lower. If this were true it would indicate that farmers rely more on support income than market returns. The results support the view presented in literature that land values are more responsive to government payments when these payments are perceived to be permanent. An important result of this study is that the structural differences between regions and the structural change in agriculture seemed to have a considerable role in affecting land prices. Firstly, the present structure affects the competition in the land market: the more dense farms are in the region the more there are potential buyers, and the land price increases. Secondly, the change in farm structure (especially in animal husbandry) connected to the policy changes that increase area-based support affects land prices. The effect comes from two sources. Growing farms need more land for the manure, and the proportion of retiring farmers may be lower. The introduction of the manure density variable proved to be an efficient way to aggregate the otherwise very difficult task of taking into account the environmental pressure caused by structural change in animal husbandry. Finally, infrastructure also has a very important role in determining the price level of agricultural land. If other industries are prospering in the surrounding area, agricultural viability also seems to improve. The non-farm opportunities offered to farm families make continuing and developing farming more tempting.

The success of the diversified farm : resource-based view

Farms and rural areas have many specific valuable resources that can be used to create non-agricultural products and services. Most of the research regarding on-farm diversification has hitherto concentrated on business start-up or farm survival strategies. Resource allocation and also financial success have not been the primary focus of investigations as yet. In this study these specific topics were investigated i.e. resource allocation and also the financial success of diversified farms from a farm management perspective. The key question addressed in this dissertation, is how tangible and intangible resources of the diversified farm affect the financial success. This study’s theoretical background deals with resource-based theory, and also certain themes of the theory of learning organisation and other decision-making theories. Two datasets were utilised in this study. First, data were collected by postal survey in 2001 (n = 663). Second, data were collected in a follow-up survey in 2006 (n = 439). Data were analysed using multivariate data analyses and path analyses. The study results reveal that, diversified farms performed differently. Success and resources were linked. Professional and management skills affected other resources, and hence directly or indirectly influenced success per se. In the light of empirical analyses of this study, tangible and intangible resources owned by the diversified farm impacted on its financial success. The findings of this study underline the importance of skills and networks for entrepreneur(s). Practically speaking all respondents of this study used either agricultural resources for non-farm businesses or non-farm resources for agricultural enterprises. To share resources in this way was seen as a pragmatic opportunity recognised by farmers. One of the downsides of diversification might be the phenomenon of over-diversification, which can be defined as the situation in which a farm diversifies beyond its optimal limit. The empirical findings of this study reveal that capital and labour resource constrains did have adverse effects on financial success. The evidence indicates that farms that were capital and labour resource constrained in 2001 were still less profitable than their ‘no problems’ counterparts five years later.

Consumers and the conceptual and practical appropriation of functional foods

Taking the appropriation of objects as a theoretical starting point, this study makes a distinction between a conceptual and practical level of adopting new objects and products in everyday life. The study applies the concept of appropriation in social food research and examines consumers appropriation of functional foods, i.e., foods developed to improve health and well-being or reduce the risk of disease beyond the usual nutritional effects of foods. The study uses the concept of appropriation to understand the adoption and the process of making functional foods our own . First, the study focuses on the conceptual appropriation by analysing consumers interpretations and opinions on functional foods. Second, it analyses the use of functional foods and examines the role of sociodemographic and food- and health-related background factors in the use of functional foods. Both quantitative and qualitative data were used in the study. Altogether 1210 Finns representative of the population took part in a survey carried out in 2002 as computer-assisted telephone interviews (CATI). The survey examined the acceptability and use of functional foods in Finland. In 2004, eight focus group discussions were organised for 45 users and non-users of cholesterol-lowering spreads. The qualitative study focused on consumers interpretative perspectives on healthy eating and functional foods. The findings are reported in four original articles and a summary article. The results show that the appropriation of functional foods is a multifaceted phenomenon. The conceptual appropriation is related to consumers interpretations of functional foods in the context of healthy foods and healthy eating; their trust in the products, their manufacturers, research and control; and the relationship of functional foods and the ideal of natural foods. The analysis of the practical appropriation of four different types of foods marketed as functional showed that there are sociodemographic differences between users and non-users of the products, but more importantly, the differences are related to consumers food- and health-related views and practices. Consumers ways of appropriating functional foods in the conceptual and practical sense take shape in a complex web of ideas and everyday practices concerning food, health and eating as a whole. The results also indicate that the conceptual and practical appropriation are not necessarily uniform or coherent processes. Consumers interpret healthy eating and functional foods from a variety of perspectives and there is a multiplicity of rationales of using functional foods. Appropriation embraces many opposing dimensions simultaneously: good experiences and doubts, approval and criticism, expectations and things taken for granted.

Informational efficiency of the European Union emission allowance market

This thesis studies the informational efficiency of the European Union emission allowance (EUA) market. In an efficient market, the market price is unpredictable and profits above average are impossible in the long run. The main research problem is does the EUA price follow a random walk. The method is an econometric analysis of the price series, which includes an autocorrelation coefficient test and a variance ratio test. The results reveal that the price series is autocorrelated and therefore a nonrandom walk. In order to find out the extent of predictability, the price series is modelled with an autoregressive model. The conclusion is that the EUA price is autocorrelated only to a small degree and that the predictability cannot be used to make extra profits. The EUA market is therefore considered informationally efficient, although the price series does not fulfill the requirements of a random walk. A market review supports the conclusion, but it is clear that the maturing of the market is still in process.

Feasibility of assimilating ASCAT surface winds into a Limited Area Model

Sea-surface wind observations of previous generation scatterometers have been successfully assimilated into Numerical Weather Prediction (NWP) models. Impact studies conducted with these assimilation implementations have shown a distinct improvement to model analysis and forecast accuracies. The Advanced Scatterometer (ASCAT), flown on Metop-A, offers an improved sea-surface wind accuracy and better data coverage when compared to the previous generation scatterometers. Five individual case studies are carried out. The effect of including ASCAT data into High Resolution Limited Area Model (HIRLAM) assimilation system (4D-Var) is tested to be neutral-positive for situations with general flow direction from the Atlantic Ocean. For northerly flow regimes the effect is negative. This is later discussed to be caused by problems involving modeling northern flows, and also due to the lack of a suitable verification method. Suggestions and an example of an improved verification method is presented later on. A closer examination of a polar low evolution is also shown. It is found that the ASCAT assimilation scheme improves forecast of the initial evolution of the polar low, but the model advects the strong low pressure centre too fast eastward. Finally, the flaws of the implementation are found small and implementing the ASCAT assimilation scheme into the operational HIRLAM suite is feasible, but longer time period validation is still required.

Satelliitti-instrumentti IASI ja sen sovellukset sääpalvelulle

IASI on vuodesta 2007 käytössä ollut satelliitti-instrumentti Metop-polaarisatelliitissa. IASI-mittauksista johdettuja lopputuotteita ovat mm. lämpötilan ja kosteuden pystyprofiilit, pilven ylärajan lämpötila ja paine sekä eri hivenkaasujen pitoisuudet. Tämä työ on alkua IASI:n käyttöönotolle Ilmatieteen laitoksella. Työssä selvitetään IASI:n lämpötilaprofiileiden ja pilven ylärajan paineen soveltuvuutta sääpalvelulle vertailemalla niitä jo käytössä oleviin sääpalvelun työkaluihin. IASI-mittauksista johdettuja lämpötilaprofiileita verrataan Ilmatieteen laitoksen operatiivisiin pintaluotauksiin. Lisäksi tarkastellaan IASI:n lämpötilaprofiileiden vaikutusta paikallisen analyysi- ja ennustustyökalu LAPS:in lämpötila-analyysiin. IASI:n pilven ylärajan lämpötiloja verrataan AVHRR-radiometrista johdettuihin pilven ylärajan lämpötiloihin. IASI:sta ja AVHRR:stä johdetut keskimääräiset lämpötilat olivat lähes samat alapilville. Yläpilville ja osittain läpinäkyville cirrus-pilville lämpötilaero oli noin 5 Celsius-astetta. IASI:n lämpötilaluotaukset osoittautuivat käyttökelpoisiksi etenkin keski- ja ylätroposfäärissä (350 - 600 hPa), jossa IASI:n antama lämpötila erosi pintaluotauksen lämpötilasta vain noin +-1 Celsius-astetta. IASI:n lämpötilaluotausten suurin ongelma on mittausten katkeaminen pilven ylärajaan. IASI-luotauksilla oli suuri vaikutus LAPS-lämpötila-analyysiin mallin koko alueella, mutta vertailuaineiston puutteessa ei voida varmasti sanoa onko vaikutus positiivinen vai negatiivinen. Tulokset ovat lupaavia. IASI:n lämpötilaluotaukset ja pilven ylärajan lämpötila vaikuttavat käyttökelpoisilta sääpalvelun tarpeisiin.

Suomen talviukkoset 2003-2007

Tutkimuksen tarkoitus on kartoittaa Suomen talviukkosten ominaisuuksia ja klimatologiaa. Tiedot Suomen talviukkosten klimatologista tutkimusta varten kerättiin mm. salamanpaikantimilta ja ihmisten IL:lle tiedottamista havainnoista, SYNOP-kartoilta, rintama-analyyseistä, luotauksista ja luotaustietojen pohjalta piirretyistä salamakartoista sekä sadetutkan kuvista. Tutkimuksessa määriteltiin talviukkoseksi yksi tai useampi salamahavainto säätilanteessa, jossa salamahavaintopaikkaan ja -aikaan nähden lähimmistä synop-havainnoista ainakin yhdessä on havaittu joko ≤ 0 °C lämpötila tai lumi- tai räntäsadetta. Näin rajattuna vuosina 2003-2007 talviukkostapauksia oli 19 kpl. Tapaukset jakaantuivat melko tasaisesti loka-marraskuun vaihteen ja huhtikuun välille, pienet maksimit olivat marras- ja helmikuussa. Tapausten esiintymisajankohtia rajoitti siis vain talviukkosten määritelmän mukaisten sääolosuhteiden esiintyminen. Vuorokaudenajalla ei ollut merkittävää vaikutusta talvisalamoiden esiintymiselle. Alueellisesti talviukkoset painottuivat maan lounaisosaan mutta niitä havaittiin koko maassa Käsivarren Lappia myöten. 16 tapauksessa 19:sta talviukkoset havaittiin okluusiorintamaksi analysoidun rintaman yhteydessä. Yhdessä tapauksessa rintama oli analysoitu kylmäksi ja kahdessa rintama-analyysi oli epäselvä. Matalapaineen keskus sijaitsi iskuhavaintopaikkoihin nähden yleensä lännen puolella. Lännen puolen yleisyyden aiheutti okluusiorintamien kiertosuunta myötäpäivään matalapaineen keskukseen nähden. Pintalämpötila oli lähes kaikissa talviukkostapauksissa lähellä nollaa ja havaintopaikan lähellä olevissa SYNOP-havainnoissa havaittiin useissa tapauksissa sadetta sekä vetenä että kiinteässä olomuodossa. CAPE:n arvot olivat joko nollassa tai hyvin lähellä sitä iskuhavaintoihin nähden lähimmissä luotauksissa. Lämmintä advektiota havaittiin lähes kaikissa tutkituissa luotauksissa, myös sulan meren vaikutus näkyi tuloksissa talviukkosia edistävänä tekijänä. Maasalamoita havaittiin talviukkosten yhteydessä useimmin 1 tai 2 ja iskuja salamaa kohden 1 tai 2. Havaituista maasalamoista positiivisia oli 46 % ja negatiivisia 54 %. Tapaustutkimukset tehtiin kahdesta vuosien 2003-2007 talviukkosia hyvin edustavasta tapauksesta sekä yhdestä salamamäärältään poikkeuksellisen runsaasta tapauksesta.

Havaintojärjestelmäkokeet numeerisessa sään ennustamisessa

Sään ennustamisessa tärkeä työväline on numeerinen säämalli, jossa ilmakehän tilan kuvaaminen perustuu niin sanottujen perusyhtälöiden ratkaisemiseen. Niiden avulla lasketaan tuulen nopeuden, ilmanpaineen, lämpötilan ja kosteuden muutokset pienin aika-askelin eteenpäin. Numeerinen säämalli tarvitsee lähtötiedokseen laadultaan hyviä havaintoja ilmakehän todellisesta tilasta. Joka vuorokausi kymmenet in-situ- ja kaukohavaintojärjestelmät tekevät havaintoja ilmakehästä sen pintakerroksesta ylärajaan asti. Pelkät havainnot eivät kuitenkaan riitä antamaan tarpeeksi tarkkoja lähtötietoja säämallille. Ongelman ratkaisu on data-assimilaatiojärjestelmä. Se yhdistää laatukontrollin läpikäyneen havaintotiedon ja mallitiedon, jota kutsutaan ennakkokentäksi, ja luo niiden avulla analyysin ilmakehän todellisesta tilasta. Havaintojärjestelmäkokeiden (OSE) avulla testataan havaintojärjestelmien vaikutuksia data-assimilaatiojärjestelmän tuottamien analyysien ja niistä tuotettujen sääennusteiden laatuun. OSE:n avulla selvitetään, kuinka hyvin saatavilla olevia havaintoja käytetään hyväksi, tai kannattaako jokin uusi havaintojärjestelmä ottaa mukaan operatiiviseen ennustusjärjestelmään. Tämän tutkielman aluksi tutustutaan lyhyesti numeerisiin säämalleihin, havaintojärjestelmiin ja dataassimilaatiojärjestelmiin, minkä jälkeen tehdään yleinen kirjallisuuskatsaus havaintojärjestelmäkokeiden suorittamisesta. Sen jälkeen keskitytään Doppler-säätutkan tuottamien tutkasäteen suuntaisten tuulen nopeushavaintojen hyödyntämiseen rajoitetun alueen HIRLAM-säämallissa, mitä on tutkittu viime vuosina Ilmatieteen laitoksessa (IL). Kaukohavaintojärjestelmien käyttö on lisääntynyt viime vuosien aikana kehittyneiden analyysimenetelmien ansiosta. Tavanomaisten in-situ- havaintojärjestelmien raju vähentäminen dataassimilaatiossa ei näytä kuitenkaan vielä olevan mahdollista. Kaukohavainnot ovat useiden OSE-kokeiden perusteella parantaneet analyysiä ja ennusteita erityisesti alueilla, joissa tavanomainen havaintoverkosto on harva. Tutkatuulihavaintojen on ajateltu tuovan parannuksia rajoitetun alueen säämalleihin, sillä niiden avulla saadaan tärkeää lisätietoa tuulen ageostrofisista ominaisuuksista. Sen johdosta pienen mittakaavan sääilmiöiden kuten meri- ja rinnetuulien ennustettavuuden toivotaan paranevan. IL:ssa on kehitetty tutkatuulihavaintojen käsittely- ja mallintamismenetelmiä, minkä jälkeen on suoritettu OSE Suomen tutkaverkoston tuulihavainnoilla aikavälille 1.-29.2.2008 HIRLAMin operatiiviselle 3D-VAR dataassimilaatiojärjestelmälle. Kyseisen OSE:n aineisto on saatu käyttöön tähän tutkielmaan. Kontrolliassimilaatiossa CON ovat mukana kaikki operatiiviset havaintojärjestelmät ja koeassimilaatioon RAD_ALL on syötetty myös tutkatuulihavainnot. Tässä tutkielmassa OSE:n tulokset todennetaan TEMP-tuulihavaintojen avulla tutkimalla ennakkokentän ja analyysin harhaa sekä satunnaisvirhettä. Tulosten perusteella tutkatuulihavainnot parantavat ennakkokenttää ja analyysiä erityisesti keskitroposfäärissä, mutta alatroposfäärissä vaikutus analyysiin on lähes neutraali. Koska tutkatuulihavainnot ulottuvat n. 4-6 km korkeuteen, ne eivät vaikuta ylätroposfäärin analyysiin. Tulokset eivät kuitenkaan ole tilastollisen testin perusteella tilastollisesti merkitseviä. Parhaimmillaan RAD_ALLassimilaation voidaan osoittaa olevan CON-assimilaatiota parempi 20% merkitsevyystasolla. Lopuksi suoritettu tapaustutkimus osoittaa, että tutkatuulihavaintojen vaikutus näkyy tuulen nopeuden analyysi-inkrementtikentässä sekä jossain määrin myös lyhyessä 12h pintapaine-ennusteessa Suomen alueella. Tapaustutkimuksen perusteella tutkatuulihavaintojen vaikutus analyysiin ja ennusteeseen näyttäisi olevan lähes neutraali. OSE:n toistaminen kesäkuukaudelle voisi olla hyödyllistä, koska talvella ei esiinny esimerkiksi merituulia. Tämän tutkielman tulosten perusteella tutkatuulihavaintojen käyttäminen HIRLAMin 3D-VAR assimilaatiojärjestelmässä on hyödyllistä. Avainsanat – Nyckelord – Keywords Havaintojärjestelmäkoe, data-assimilaatio, Doppler-tutkatuulihavainto Säilytyspaikka – Förvaringställe – Where deposited Kumpulan tiedekirjasto

Miniaturized mass spectrometric ionization techniques for environmental analysis and bioanalysis

Miniaturized mass spectrometric ionization techniques for environmental analysis and bioanalysis Novel miniaturized mass spectrometric ionization techniques based on atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) were studied and evaluated in the analysis of environmental samples and biosamples. The three analytical systems investigated here were gas chromatography-microchip atmospheric pressure chemical ionization-mass spectrometry (GC-µAPCI-MS) and gas chromatography-microchip atmospheric pressure photoionization-mass spectrometry (GC-µAPPI-MS), where sample pretreatment and chromatographic separation precede ionization, and desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS), where the samples are analyzed either as such or after minimal pretreatment. The gas chromatography-microchip atmospheric pressure ionization-mass spectrometry (GC-µAPI-MS) instrumentations were used in the analysis of polychlorinated biphenyls (PCBs) in negative ion mode and 2-quinolinone-derived selective androgen receptor modulators (SARMs) in positive ion mode. The analytical characteristics (i.e., limits of detection, linear ranges, and repeatabilities) of the methods were evaluated with PCB standards and SARMs in urine. All methods showed good analytical characteristics and potential for quantitative environmental analysis or bioanalysis. Desorption and ionization mechanisms in DAPPI were studied. Desorption was found to be a thermal process, with the efficiency strongly depending on thermal conductivity of the sampling surface. Probably the size and polarity of the analyte also play a role. In positive ion mode, the ionization is dependent on the ionization energy and proton affinity of the analyte and the spray solvent, while in negative ion mode the ionization mechanism is determined by the electron affinity and gas-phase acidity of the analyte and the spray solvent. DAPPI-MS was tested in the fast screening analysis of environmental, food, and forensic samples, and the results demonstrated the feasibility of DAPPI-MS for rapid screening analysis of authentic samples.

Radical Enhanced Atomic Layer Deposition of Metals and Oxides

Atomic Layer Deposition (ALD) is a chemical, gas-phase thin film deposition method. It is known for its ability for accurate and precise thickness control, and uniform and conformal film growth. One area where ALD has not yet excelled is film deposition at low temperatures. Also deposition of metals, besides the noble metals, has proven to be quite challenging. To alleviate these limitations, more aggressive reactants are required. One such group of reactants are radicals, which may be formed by dissociating gases. Dissociation is most conveniently done with a plasma source. For example, dissociating molecular oxygen or hydrogen, oxygen or hydrogen radicals are generated. The use of radicals in ALD may surmount some of the above limitations: oxide film deposition at low temperatures may become feasible if oxygen radicals are used as they are highly reactive. Also, as hydrogen radicals are very effective reducing agents, they may be used to deposit metals. In this work, a plasma source was incorporated in an existing ALD reactor for radical generation, and the reactor was used to study five different Radical Enhanced ALD processes. The modifications to the existing reactor and the different possibilities during the modification process are discussed. The studied materials include two metals, copper and silver, and three oxides, aluminium oxide, titanium dioxide and tantalum oxide. The materials were characterized and their properties were compared to other variations of the same process, utilizing the same metal precursor, to understand what kind of effect the non-metal precursor has on the film properties and growth characteristics. Both metals were deposited successfully, and silver for the first time by ALD. The films had low resistivity and grew conformally in the ALD mode, demonstrating that the REALD of metals is true ALD. The oxide films had exceptionally high growth rates, and aluminium oxide grew at room temperature with low cycle times and resulted in good quality films. Both aluminium oxide and titanium dioxide were deposited on natural fibres without damaging the fibre. Tantalum oxide was also deposited successfully, with good electrical properties, but at slightly higher temperature than the other two oxides, due to the evaporation temperature required by the metal precursor. Overall, the ability of REALD to deposit metallic and oxide films with high quality at low temperatures was demonstrated.

Novel Organo-Noble-Gas Hydrides

Noble gases are mostly known as inert monatomic gases due to their limited reactivity with other elements. However, the first predictions of noble-gas compounds were suggested by Kossel in 1916, by von Antropoff in 1924, and by Pauling in 1930. It took many decades until the first noble-gas compound, XePtF6, was synthesized by Neil Bartlett in 1962. This was followed by gradual development of the field and many noble-gas compounds have been prepared. In 1995, a family of noble-gas hydride molecules was discovered at the University of Helsinki. These molecules have the general formula of HNgY, where H is a hydrogen atom, Ng is a noble-gas atom (Ar, Kr, or Xe), and Y is an electronegative fragment. The first molecular species made include HXeI, HXeBr, HXeCl, HKrCl and HXeH. Nowadays the total number of prepared HNgY molecules is 23 including both inorganic and organic compounds. The first and only neutral ground-state argon compound, HArF, was synthetized in 2000. Helium and neon are the only elements in the periodic table that do not form neutral, ground-state molecules. In this Thesis, experimental preparation of eight novel xenon- and krypton-containing organo-noble-gas hydrides made from acetylene (HCCH), diacetylene (HCCCCH) and cyanoacetylene (HCCCN) are presented. These novel species include the first organic krypton compound, HKrCCH, as well as the first noble-gas hydride molecule containing two Xe atoms, HXeCCXeH. Other new compounds are HXeCCH, HXeCC, HXeC4H, HKrC4H, HXeC3N, and HKrC3N. These molecules are prepared in noble-gas matrices (krypton or xenon) using ultraviolet photolysis of the precursor molecule and thermal mobilization of the photogenerated H atoms. The molecules were identified using infrared spectroscopy and ab initio calculations. The formation mechanisms of the organo-noble-gas molecules are studied and discussed in this context. The focus is to evidence experimentally the neutral formation mechanisms of HNgY molecules upon global mobility of H atoms. The formation of HXeCCXeH from another noble-gas compound (HXeCC) is demonstrated and discussed. Interactions with the surrounding matrix and molecular complexes of the HXeCCH molecule are studied. HXeCCH was prepared in argon and krypton solids in addition to a Xe matrix. The weak HXeCCH∙∙∙CO2 complex is prepared and identified. Preparation of the HXeCCH∙∙∙CO2 complex demonstrates an advanced approach to studies of HNgY complexes where the precursor complex (HCCH∙∙∙CO2) is obtained using photolysis of a larger molecule (propiolic acid).

Atomic Layer Deposition and Photocatalytic Properties of Titanium Dioxide Thin Films

Photocatalytic TiO2 thin films can be highly useful in many environments and applications. They can be used as self-cleaning coatings on top of glass, tiles and steel to reduce the amount of fouling on these surfaces. Photocatalytic TiO2 surfaces have antimicrobial properties making them potentially useful in hospitals, bathrooms and many other places where microbes may cause problems. TiO2 photocatalysts can also be used to clean contaminated water and air. Photocatalytic oxidation and reduction reactions proceed on TiO2 surfaces under irradiation of UV light meaning that sunlight and even normal indoor lighting can be utilized. In order to improve the photocatalytic properties of TiO2 materials even further, various modification methods have been explored. Doping with elements such as nitrogen, sulfur and fluorine, and preparation of different kinds of composites are typical approaches that have been employed. Photocatalytic TiO2 nanotubes and other nanostructures are gaining interest as well. Atomic Layer Deposition (ALD) is a chemical gas phase thin film deposition method with strong roots in Finland. This unique modification of the common Chemical Vapor Deposition (CVD) method is based on alternate supply of precursor vapors to the substrate which forces the film growth reactions to proceed only on the surface in a highly controlled manner. ALD gives easy and accurate film thickness control, excellent large area uniformity and unparalleled conformality on complex shaped substrates. These characteristics have recently led to several breakthroughs in microelectronics, nanotechnology and many other areas. In this work, the utilization of ALD to prepare photocatalytic TiO2 thin films was studied in detail. Undoped as well as nitrogen, sulfur and fluorine doped TiO2 thin films were prepared and thoroughly characterized. ALD prepared undoped TiO2 films were shown to exhibit good photocatalytic activities. Of the studied dopants, sulfur and fluorine were identified as much better choices than nitrogen. Nanostructured TiO2 photocatalysts were prepared through template directed deposition on various complex shaped substrates by exploiting the good qualities of ALD. A clear enhancement in the photocatalytic activity was achieved with these nanostructures. Several new ALD processes were also developed in this work. TiO2 processes based on two new titanium precursors, Ti(OMe)4 and TiF4, were shown to exhibit saturative ALD-type of growth when water was used as the other precursor. In addition, TiS2 thin films were prepared for the first time by ALD using TiCl4 and H2S as precursors. Ti1-xNbxOy and Ti1-xTaxOy transparent conducting oxide films were prepared successfully by ALD and post-deposition annealing. Highly unusual, explosive crystallization behaviour occurred in these mixed oxides which resulted in anatase crystals with lateral dimensions over 1000 times the film thickness.