Basement membrane and provisional matrix components (collagen type IV, laminins and von Willebrand factor) in rheumatoid arthritis and Sjögren s syndrome

The aim of this study was twofold- Firstly, to determine the composition of the type IV collagen which are the major components of the basement membrane (BM), in the synovial lining of the rheumatoid arthritis (RA) patient and in the BM in the labial salivary gland of the Sjögrens syndrome (SS) patient. Secondly, this thesis aimed to investigate the role of the BM component laminin α4 and laminin α5 in the migration of neutrophils from the blood vessels thorough the synovial lining layer into synovial fluid and the presence of vWF in the microvasculature of labial salivary gland in SS. Our studies showed that certain α chains type IV collagen are low in RA compared to control synovial linings, while laminin α5 exhibited a pattern of low expression regions at the synovial lining interface towards the joint cavity and fluid. Also, high numbers of macrophage-like lining cells containing MMP-9 were found in the lining. MMP-9 was also found in the synovial fluid. Collagen α1/2 (IV) mRNA was found to be present in high amount compared to the other α(IV) chains and also showed intense labelling in immunohistochemical staining in normal and SS patients. In healthy glands α5(IV) and α6(IV) chains were found to be continuous around ducts but discontinuous around acini. The α5(IV) and α6(IV) mRNAs were present in LSG explants and HSG cell line, while in SS these chains seemed to be absent or appear only in patches around the ductal BM and tended to be absent around acini in immunohistochemical staining, indicating that their synthesis and/or degradation seemed to be locally regulated around acinar cells. The provisional matrix component vWF serves as a marker of vascular damage. Microvasculature in SS showed signs of focal damage which in turn might impair arteriolar feeding, capillary transudation and venular drainage of blood. However, capillary density was not decreased but rather increased, perhaps as a result of angiogenesis compensatory to microvascular damage. Microvascular involvement of LSG may contribute to the pathogenesis of this syndrome. This twofold approach allows us to understand the intricate relation between the ECM components and the immunopathological changes that occur during the pathogenesis of these inflammatory rheumatic disease processes. Also notably this study highlights the importance of maintaining a healthy ECM to prevent the progression or possibly allow reversal of the disease to a considerable level. Furthermore, it can be speculated that a healthy BM could quarantine the inflamed region or in case of cancer cells barricade the movement of malignant cells thereby preventing further spread to the surrounding areas. This understanding can be further applied to design appropriate drugs which act specifically to maintain a proper BM/BM like intercellular matrix composition.

Matrix proteinases in lung injury in the preterm infant

During inflammation, excess production and release of matrix proteinases, including matrix metalloproteinases (MMPs) and serine proteinases, may result in dysregulated extracellular proteolysis leading to development of tissue damage. Pulmonary inflammation may play an important role in the pathogenesis of lung injury in the preterm infant. The aims of this study were to evaluate involvement of MMPs and serine proteinase trypsin in acute and chronic lung injury in preterm infants and to study the role of these enzymes in acute lung injury by means of an animal model of hyperoxic lung injury. Molecular forms and levels of MMP-2, -8, and -9, and their specific inhibitor, tissue inhibitor of metalloproteinases (TIMP)-2, as well as trypsin were studied in tracheal aspirate fluid (TAF) samples collected from preterm infants with respiratory distress. Expression and distribution of trypsin-2 and proteinase-activated receptor 2 (PAR2) was examined in autopsy lung specimens from fetuses, from preterm infants with respiratory distress syndrome (RDS) or bronchopulmonary dysplasia (BPD), and from newborn infants without lung injury. We detected higher MMP-8 and trypsin-2 and lower TIMP-2 in TAF from preterm infants with more severe acute respiratory distress. Infants subsequently developing BPD had higher levels of MMP-8 and trypsin-2 early postnatally than did those who survived without this chronic lung injury. Immunohistochemically, trypsin-2 was mainly detectable in bronchial epithelium, but also in alveolar epithelium, and its expression was strongest in prolonged RDS. Since trypsin-2 is potent activator of PAR2, a G-protein coupled receptor involved in inflammation, we studied PAR2 expression in the lung. PAR2 co-localized with trypsin-2 in bronchoalveolar epithelium and its expression was significantly higher in bronchoalveolar epithelium in preterm infants with prolonged RDS than in newborn controls. In the experimental study, rats were exposed to >95% oxygen for 24, 48, and 60 hours, or room air. At 48 hours of hyperoxia, MMP-8 and trypsin levels sharply increased in bronchoalveolar lavage fluid, and expression of trypsin appeared in alveolar epithelium, and MMP-8 predominantly in macrophages. In conclusion, high pulmonary MMP-8 and trypsin-2 early postnatally are associated with severity of acute lung injury and subsequent development of BPD in preterm infants. In the injured preterm lung, trypsin-2 co-localizes with PAR2 in bronchoalveolar epithelium, suggesting that PAR2 activated by high levels of trypsin-2 is involved in lung inflammation associated with development of BPD. Marked increase in MMP-8 and trypsin early in the course of experimental hyperoxic lung injury suggests that these enzymes play a role in the pathogenesis of acute lung injury. Further exploration of the roles of trypsin and MMP-8 in lung injury may offer new targets for therapeutic intervention.

Radiation effects in supported nanoparticles

Nanotechnology applications are entering the market in increasing numbers, nanoparticles being among the main classes of materials used. Particles can be used, e.g., for catalysing chemical reactions, such as is done in car exhaust catalysts today. They can also modify the optical and electronic properties of materials or be used as building blocks for thin film coatings on a variety of surfaces. To develop materials for specific applications, an intricate control of the particle properties, structure, size and shape is required. All these depend on a multitude of factors from methods of synthesis and deposition to post-processing. This thesis addresses the control of nanoparticle structure by low-energy cluster beam deposition and post-synthesis ion irradiation. Cluster deposition in high vacuum offers a method for obtaining precisely controlled cluster-assembled materials with minimal contamination. Due to the clusters small size, however, the cluster-surface interaction may drastically change the cluster properties on deposition. In this thesis, the deposition process of metal and alloy clusters on metallic surfaces is modelled using molecular dynamics simulations, and the mechanisms influencing cluster structure are identified. Two mechanisms, mechanical melting upon deposition and thermally activated dislocation motion, are shown to determine whether a deposited cluster will align epitaxially with its support. The semiconductor industry has used ion irradiation as a tool to modify material properties for decades. Irradiation can be used for doping, patterning surfaces, and inducing chemical ordering in alloys, just to give a few examples. The irradiation response of nanoparticles has, however, remained an almost uncharted territory. Although irradiation effects in nanoparticles embedded inside solid matrices have been studied, almost no work has been done on supported particles. In this thesis, the response of supported nanoparticles is studied systematically for heavy and light ion irradiation. The processes leading to damage production are identified and models are developed for both types of irradiation. In recent experiments, helium irradiation has been shown to induce a phase transformation from multiply twinned to single-crystalline nanoparticles in bimetallic alloys, but the nature of the transition has remained unknown. The alloys for which the effect has been observed are CuAu and FePt. It is shown in this thesis that transient amorphization leads to the observed transition and that while CuAu and FePt do not amorphize upon irradiation in bulk or as thin films, they readily do so as nanoparticles. This is the first time such an effect is demonstrated with supported particles, not embedded in a matrix where mixing is always an issue. An understanding of the above physical processes is essential, if nanoparticles are to be used in applications in an optimal way. This thesis clarifies the mechanisms which control particle morphology, and paves way for the synthesis of nanostructured materials tailored for specific applications.

Residential Differentiation, Housing Policy and Urban Planning in the Transformation from State Socialism to a Market Economy: The Case of Tallinn

The thesis examines urban issues arising from the transformation from state socialism to a market economy. The main topics are residential differentiation, i.e., uneven spatial distribution of social groups across urban residential areas, and the effects of housing policy and town planning on urban development. The case study is development in Tallinn, the capital city of Estonia, in the context of development of Central and Eastern European cities under and after socialism. The main body of the thesis consists of four separately published refereed articles. The research question that brings the articles together is how the residential (socio-spatial) pattern of cities developed during the state socialist period and how and why that pattern has changed since the transformation to a market economy began. The first article reviews the literature on residential differentiation in Budapest, Prague, Tallinn and Warsaw under state socialism from the viewpoint of the role of housing policy in the processes of residential differentiation at various stages of the socialist era. The paper shows how the socialist housing provision system produced socio-occupational residential differentiation directly and indirectly and it describes how the residential patterns of these cities developed. The second article is critical of oversimplified accounts of rapid reorganisation of the overall socio-spatial pattern of post-socialist cities and of claims that residential mobility has had a straightforward role in it. The Tallinn case study, consisting of an analysis of the distribution of socio-economic groups across eight city districts and over four housing types in 1999 as well as examining the role of residential mobility in differentiation during the 1990s, provides contrasting evidence. The third article analyses the role and effects of housing policies in Tallinn s residential differentiation. The focus is on contemporary post-privatisation housing-policy measures and their effects. The article shows that the Estonian housing policies do not even aim to reduce, prevent or slow down the harmful effects of the considerable income disparities that are manifest in housing inequality and residential differentiation. The fourth article examines the development of Tallinn s urban planning system 1991-2004 from the viewpoint of what means it has provided the city with to intervene in urban development and how the city has used these tools. The paper finds that despite some recent progress in planning, its role in guiding where and how the city actually developed has so far been limited. Tallinn s urban development is rather initiated and driven by private agents seeking profit from their investment in land. The thesis includes original empirical research in the three articles that analyse development since socialism. The second article employs quantitative data and methods, primarily index calculation, whereas the third and the fourth ones draw from a survey of policy documents combined with interviews with key informants. Keywords: residential differentiation, housing policy, urban planning, post-socialist transformation, Estonia, Tallinn

Search for the Higgs boson produced in association with Z→ℓ+ℓ- using the matrix element method at CDF II

We present a search for associated production of the standard model (SM) Higgs boson and a $Z$ boson where the $Z$ boson decays to two leptons and the Higgs decays to a pair of $b$ quarks in $p\bar{p}$ collisions at the Fermilab Tevatron. We use event probabilities based on SM matrix elements to construct a likelihood function of the Higgs content of the data sample. In a CDF data sample corresponding to an integrated luminosity of 2.7 fb$^{-1}$ we see no evidence of a Higgs boson with a mass between 100 GeV$/c^2$ and 150 GeV$/c^2$. We set 95% confidence level (C.L.) upper limits on the cross-section for $ZH$ production as a function of the Higgs boson mass $m_H$; the limit is 8.2 times the SM prediction at $m_H = 115$ GeV$/c^2$.

Measurement of the WW+WZ production cross section using a matrix element technique in lepton+jets events

We present a measurement of the $WW+WZ$ production cross section observed in a final state consisting of an identified electron or muon, two jets, and missing transverse energy. The measurement is carried out in a data sample corresponding to up to 4.6~fb$^{-1}$ of integrated luminosity at $\sqrt{s} = 1.96$ TeV collected by the CDF II detector. Matrix element calculations are used to separate the diboson signal from the large backgrounds. The $WW+WZ$ cross section is measured to be $17.4\pm3.3$~pb, in agreement with standard model predictions. A fit to the dijet invariant mass spectrum yields a compatible cross section measurement.

Top Quark Mass Measurement in the lepton+jets Channel Using a Matrix Element Method and in situ Jet Energy Calibration

A precision measurement of the top quark mass m_t is obtained using a sample of ttbar events from ppbar collisions at the Fermilab Tevatron with the CDF II detector. Selected events require an electron or muon, large missing transverse energy, and exactly four high-energy jets, at least one of which is tagged as coming from a b quark. A likelihood is calculated using a matrix element method with quasi-Monte Carlo integration taking into account finite detector resolution and jet mass effects. The event likelihood is a function of m_t and a parameter DJES to calibrate the jet energy scale /in situ/. Using a total of 1087 events, a value of m_t = 173.0 +/- 1.2 GeV/c^2 is measured.

Top quark mass measurement in the lepton plus jets channel using a modified matrix element method

We report a measurement of the top quark mass, m_t, obtained from ppbar collisions at sqrt(s) = 1.96 TeV at the Fermilab Tevatron using the CDF II detector. We analyze a sample corresponding to an integrated luminosity of 1.9 fb^-1. We select events with an electron or muon, large missing transverse energy, and exactly four high-energy jets in the central region of the detector, at least one of which is tagged as coming from a b quark. We calculate a signal likelihood using a matrix element integration method, with effective propagators to take into account assumptions on event kinematics. Our event likelihood is a function of m_t and a parameter JES that determines /in situ/ the calibration of the jet energies. We use a neural network discriminant to distinguish signal from background events. We also apply a cut on the peak value of each event likelihood curve to reduce the contribution of background and badly reconstructed events. Using the 318 events that pass all selection criteria, we find m_t = 172.7 +/- 1.8 (stat. + JES) +/- 1.2 (syst.) GeV/c^2.

Top quark mass measurement in the tt̅ all hadronic channel using a matrix element technique in pp̅ collisions at √s=1.96 TeV

We present a measurement of the top quark mass in the all-hadronic channel (\tt $\to$ \bb$q_{1}\bar{q_{2}}q_{3}\bar{q_{4}}$) using 943 pb$^{-1}$ of \ppbar collisions at $\sqrt {s} = 1.96$ TeV collected at the CDF II detector at Fermilab (CDF). We apply the standard model production and decay matrix-element (ME) to $\ttbar$ candidate events. We calculate per-event probability densities according to the ME calculation and construct template models of signal and background. The scale of the jet energy is calibrated using additional templates formed with the invariant mass of pairs of jets. These templates form an overall likelihood function that depends on the top quark mass and on the jet energy scale (JES). We estimate both by maximizing this function. Given 72 observed events, we measure a top quark mass of 171.1 $\pm$ 3.7 (stat.+JES) $\pm$ 2.1 (syst.) GeV/$c^{2}$. The combined uncertainty on the top quark mass is 4.3 GeV/$c^{2}$.

The Feminist Transformation of Bioethics : An Analysis of Theoretical Perspectives and Practical Applications in Feminist Bioethics

The purpose of this study is to examine how transformation is defining feminist bioethics and to determine the nature of this transformation. Behind the quest for transformation is core feminism and its political implications, namely, that women and other marginalized groups have been given unequal consideration in society and the sciences and that this situation is unacceptable and should be remedied. The goal of the dissertation is to determine how feminist bioethicists integrate the transformation into their respective fields and how they apply the potential of feminism to bioethical theories and practice. On a theoretical level, feminist bioethicists wish to reveal how current ways of knowing are based on inequality. Feminists pay special attention especially to communal and political contexts and to the power relations endorsed by each community. In addition, feminist bioethicists endorse relational ethics, a relational account of the self in which the interconnectedness of persons is important. On the conceptual level, feminist bioethicists work with beliefs, concepts, and practices that give us our world. As an example, I examine how feminist bioethicists have criticized and redefined the concept of autonomy. Feminist bioethicists emphasize relational autonomy, which is based on the conviction that social relationships shape moral identities and values. On the practical level, I discuss stem cell research as a test case for feminist bioethics and its ability to employ its methodologies. Analyzing these perspectives allowed me first, to compare non-feminist and feminist accounts of stem cell ethics and, second, to analyze feminist perspectives on the novel biotechnology. Along with offering a critical evaluation of the stem cell debate, the study shows that sustainable stem cell policies should be grounded on empirical knowledge about how donors perceive stem cell research and the donation process. The study indicates that feminist bioethics should develop the use of empirical bioethics, which takes the nature of ethics seriously: ethical decisions are provisional and open for further consideration. In addition, the study shows that there is another area of development in feminist bioethics: the understanding of (moral) agency. I argue that agency should be understood to mean that actions create desires.

Service Productivity: Toward a Conceptualisation of the Transformation of inputs

The productivity of a process is related to how effectively input resources are transformed into value for customers. For the needs of manufacturers of physical products there are widely used productivity concepts and measurements instruments. However, in service processes the underlying assumptions of these concepts and models do not hold. For example, manufacturing-based productivity models assume that an altered configuration of input resources in the production process does not lead to quality changes in outputs (the constant-quality assumption). However, in a service context changes in the production resources and productions systems do affect the perceived quality of services. Therefore, using manufacturing-oriented productivity models in service contexts are likely to give managers wrong directions for action. Research into the productivity of services is still scarce, because of the lack of viable models. The purpose of the present article is to analyse the requirements for the development of a productivity concept for service operations. Based on the analysis, a service productivity model is developed. According to this model, service productivity is a function of 1) how effectively input resources into the service (production) process are transformed to outputs in the form of services (internal or cost efficiency), 2) how well the quality of the service process and its outcome is perceived (external or revenue efficiency), and 3) how effectively the capacity of the service process is utilised (capacity efficiency). In addition, directions for developing measurement models for service productivity are discussed.