Genetic diversity of Atlantic salmon (Salmo salar) and European whitefish (Coregonus lavaretus) in the Baltic Sea

We described the patterns and extent of microsatellite DNA variation in historical and present-day Atlantic salmon (Salmo salar L.) stocks in the Baltic Sea and neighbouring areas, and in European whitefish (Coregonus lavaretus) ecotypes, populations and run-timing types in Finland. Moreover, the amount and pattern of genetic diversity in historical salmon populations before human impact were described, and the proportion of diversity maintained in the present hatchery stocks evaluated. Salmon populations in the Baltic Sea were, on average, significantly less variable than eastern Atlantic populations, and the diversity of landlocked populations (Lakes Vänern, Saimaa, Onega and Ladoga) was in turn significantly lower than that of anadromous salmon populations in the Baltic Sea populations. Within the Baltic Sea, the anadromous populations of Atlantic salmon formed three clear groups, corresponding to the northern (Gulf of Bothnia), eastern (Gulf of Finland and eastern Baltic Main Basin) and southern (western Baltic Main Basin) regions. Based on microsatellite data, three salmon population groups in the Baltic Sea were considered potentially different colonization lineages. In short- and long-term breeding programmes of Atlantic salmon, the average observed rate of loss of alleles was 4.9% and 2.0% per generation and the average rate of loss of heterozygosity was 1.4% and 1% per generation, respectively. When comparing the genetic parameters of stocks before and after hatchery breeding of several successive generations (Rivers Iijoki and Oulujoki), statistically significant changes in allele frequencies were common, while large wild stock in the Teno River has remained temporally very stable over 56 years. Despite the observed losses of genetic diversity in broodstock breeding, a large proportion of the genetic resources of the extirpated stocks are still conserved in the broodstocks. Genetic differentiation among European whitefish ecotypes was generally low, thus giving support to the hypothesis of one native European whitefish species in Fennoscandia. Among the ecotypes, the northern, large sparsely rakered, bottom-dwelling whitefish was the most unique. The known genetic differences in quantitative traits have thus either developed independently of potential phylogenetic lineages, or the lineages have mixed and the quantitative traits of the ecotypes, like gill-raker number, have later changed according to environment and selection pressures. Overall, genetic distances between the anadromous whitefish populations along the Finnish coast, especially in the Bothnian Bay area, were small. Wild whitefish populations studied had slightly higher allelic diversity than hatchery-reared populations in corresponding rivers.

Automatic Lameness Detection in a Milking Robot : Instrumentation, measurement software, algorithms for data analysis and a neural network model

The aim of this thesis is to develop a fully automatic lameness detection system that operates in a milking robot. The instrumentation, measurement software, algorithms for data analysis and a neural network model for lameness detection were developed. Automatic milking has become a common practice in dairy husbandry, and in the year 2006 about 4000 farms worldwide used over 6000 milking robots. There is a worldwide movement with the objective of fully automating every process from feeding to milking. Increase in automation is a consequence of increasing farm sizes, the demand for more efficient production and the growth of labour costs. As the level of automation increases, the time that the cattle keeper uses for monitoring animals often decreases. This has created a need for systems for automatically monitoring the health of farm animals. The popularity of milking robots also offers a new and unique possibility to monitor animals in a single confined space up to four times daily. Lameness is a crucial welfare issue in the modern dairy industry. Limb disorders cause serious welfare, health and economic problems especially in loose housing of cattle. Lameness causes losses in milk production and leads to early culling of animals. These costs could be reduced with early identification and treatment. At present, only a few methods for automatically detecting lameness have been developed, and the most common methods used for lameness detection and assessment are various visual locomotion scoring systems. The problem with locomotion scoring is that it needs experience to be conducted properly, it is labour intensive as an on-farm method and the results are subjective. A four balance system for measuring the leg load distribution of dairy cows during milking in order to detect lameness was developed and set up in the University of Helsinki Research farm Suitia. The leg weights of 73 cows were successfully recorded during almost 10,000 robotic milkings over a period of 5 months. The cows were locomotion scored weekly, and the lame cows were inspected clinically for hoof lesions. Unsuccessful measurements, caused by cows standing outside the balances, were removed from the data with a special algorithm, and the mean leg loads and the number of kicks during milking was calculated. In order to develop an expert system to automatically detect lameness cases, a model was needed. A probabilistic neural network (PNN) classifier model was chosen for the task. The data was divided in two parts and 5,074 measurements from 37 cows were used to train the model. The operation of the model was evaluated for its ability to detect lameness in the validating dataset, which had 4,868 measurements from 36 cows. The model was able to classify 96% of the measurements correctly as sound or lame cows, and 100% of the lameness cases in the validation data were identified. The number of measurements causing false alarms was 1.1%. The developed model has the potential to be used for on-farm decision support and can be used in a real-time lameness monitoring system.

Options for selecting dairy cattle for milk coagulation ability

Lypsylehmien maidon juoksettumiskyvyn jalostuskeinot Väitöskirjassa tutkittiin lypsylehmien maidon juustonvalmistuslaadun parantamista jalostusvalinnan avulla. Tutkimusaihe on tärkeä, sillä yhä suurempi osa maidosta käytetään juustonvalmistukseen. Tutkimuksen kohteena oli maidon juoksettumiskyky, sillä se on yksi keskeisistä juustomäärään vaikuttavista tekijöistä. Maidon juoksettumiskyky vaihteli huomattavasti lehmien, sonnien, karjojen, rotujen ja lypsykauden vaiheiden välillä. Vaikka tankkimaidon juoksettumiskyvyssä olikin suuria eroja karjoittain, karja selitti vain pienen osan juoksettumiskyvyn kokonaisvaihtelusta. Todennäköisesti perinnölliset erot lehmien välillä selittävät suurimman osan karjojen tankkimaitojen juoksettumiskyvyssä havaituista eroista. Hyvä hoito ja ruokinta vähensivät kuitenkin jossain määrin huonosti juoksettuvien tankkimaitojen osuutta karjoissa. Holstein-friisiläiset lehmät olivat juoksettumiskyvyltään ayrshire-rotuisia lehmiä parempia. Huono juoksettuminen ja juoksettumattomuus oli vain vähäinen ongelma holstein-friisiläisillä (10 %), kun taas kolmannes ayrshire-lehmistä tuotti huonosti juoksettuvaa tai juoksettumatonta maitoa. Maitoa sanotaan huonosti juoksettuvaksi silloin, kun juustomassa ei ole riittävän kiinteää leikattavaksi puolen tunnin kuluttua juoksetteen lisäyksestä. Juoksettumattomaksi määriteltävä maito ei saostu lainkaan puolen tunnin aikana ja on siksi erittäin huonoa raaka-ainetta juustomeijereille. Noin 40 % lehmien välisistä eroista maidon juoksettumiskyvyssä selittyi perinnöllisillä tekijöillä. Juoksettumiskykyä voikin sanoa hyvin periytyväksi ominaisuudeksi. Kolme mittauskertaa lehmää kohti riittää varsin hyvin lehmän maidon keskimääräisen juoksettumiskyvyn arvioimiseen. Tällä hetkellä juoksettumiskyvyn suoran jalostamisen ongelmana on kuitenkin automatisoidun, laajamittaiseen käyttöön soveltuvan mittalaitteen puute. Tämän takia väitöskirjassa tutkittiin mahdollisuuksia jalostaa maidon juoksettumiskykyä epäsuorasti, jonkin toisen ominaisuuden kautta. Tällaisen ominaisuuden pitää olla kyllin voimakkaasti perinnöllisesti kytkeytynyt juoksettumiskykyyn, jotta jalostus olisi mahdollista sen avulla. Tutkittavat ominaisuudet olivat sonnien kokonaisjalostusarvossa jo mukana olevat maitotuotos ja utareterveyteen liittyvät ominaisuudet sekä kokonaisjalostusarvoon kuulumattomat maidon valkuais- ja kaseiinipitoisuus sekä maidon pH. Väitöskirjassa tutkittiin myös mahdollisuuksia ns. merkkiavusteiseen valintaan tutkimalla maidon juoksettumattomuuden perinnöllisyyttä ja kartoittamalla siihen liittyvät kromosomialueet. Tutkimuksen tulosten perusteella lehmien utareterveyden jalostaminen parantaa jonkin verran myös maidon juoksettumiskykyä sekä vähentää juoksettumattomuutta ayrshire-rotuisilla lehmillä. Lehmien maitotuotos ja maidon juoksettumiskyky sekä juoksettumattomuus ovat sen sijaan perinnöllisesti toisistaan riippumattomia ominaisuuksia. Myöskin maidon valkuais- ja kaseiinipitoisuuden perinnöllinen yhteys juoksettumiskykyyn oli likimain nolla. Maidon pH:n ja juoksettumiskyvyn välillä oli melko voimakas perinnöllinen yhteys, joten maidon pH:n jalostaminen parantaisi myös maidon juoksettumiskykyä. Todennäköisesti sen jalostaminen ei kuitenkaan vähentäisi juoksettumatonta maitoa tuottavien lehmien määrää. Koska maidon juoksettumattomuus on niin yleinen ongelma suomalaisilla ayrshire-lehmillä, väitöksessä selvitettiin tarkemmin ilmiön taustoja. Kaikissa kolmessa tutkimusaineistoissa noin 10 % ayrshire-lehmistä tuotti juoksettumatonta maitoa. Kahden vuoden kuukausittaisen seurannan aikana osa lehmistä tuotti juoksettumatonta maitoa lähes joka mittauskerralla. Maidon juoksettumattomuus oli yhteydessä lypsykauden vaiheeseen, mutta mikään ympäristötekijöistä ei pystynyt täysin selittämään sitä. Sen sijaan viitteet sen periytyvyydestä vahvistuivat tutkimusten edetessä. Lopuksi tutkimusryhmä onnistui kartoittamaan juoksettumattomuutta aiheuttavat kromosomialueet kromosomeihin 2 ja 18, lähelle DNA-merkkejä BMS1126 ja BMS1355. Tulosten perusteella maidon juoksettumattomuus ei ole yhteydessä maidon juoksettumistapahtumassa keskeisiin kaseiinigeeneihin. Sen sijaan on mahdollista, että juoksettumattomuusongelman aiheuttavat kaseiinigeenien syntetisoinnin jälkeisessä muokkauksessa tapahtuvat virheet. Asia vaatii kuitenkin perusteellista tutkimista. Väitöksen tulosten perusteella maidon juoksettumattomuusgeeniä kantavien eläinten karsiminen jalostuseläinten joukosta olisi tehokkain tapa jalostaa maidon juoksettumiskykyä suomalaisessa lypsykarjapopulaatiossa.

Rearing strategies of young dairy calves in relation to production, behaviour and welfare

Vasikoiden kasvatus yksilökarsinoissa, imemismahdollisuuden puute maitojuoton yhteydessä sekä pienet juomamäärät ovat tekijöitä, jotka mahdollisesti voivat vähentää vasikoiden hyvinvointia. Vasikoiden kasvatukseen etsitäänkin uusia tapoja, joissa eläinten käyttäytymistarpeet ja hyvinvointi otetaan entistä paremmin huomioon. Tässä väitöskirjassa vasikoiden kasvatusta on tarkasteltu sekä tuotannon että vasikoiden käyttäytymisen ja hyvinvoinnin kannalta. Väitöskirja koostuu kolmesta kokeesta, joista ensimmäisessä tutkittiin vasikoiden kasvatusta ryhmäkarsinoissa ulkona tai sisällä ja vasikoiden kasvatusta sisällä ryhmä- tai yksilökarsinoissa. Toisessa kokeessa vasikoiden annettiin imeä emiään rajoitetusti lypsyn jälkeen viiden tai kahdeksan viikon ajan ja kolmannessa selvitettiin vasikoiden veden juontia, kun vasikat saivat juomarehua vapaasti. Lisäksi kokeiden yhdistetystä aineistosta analysoitiin eri rehujen syöntimäärien suhdetta sekä rehujen vaikutusta kasvuun ennen ja jälkeen maidosta vieroituksen. Tutkimuksessa todettiin, että vasikoita voi ryhmässä kasvattaa kylmissä ja vaihtelevissa sääoloissa ulkona, kunhan ne hoidetaan ja ruokitaan erittäin huolellisesti. Kylmällä ilmalla vasikat saattavat kuitenkin syödä väkirehua vähemmän varsinkin, jos ruokailupaikka on ulkona ja makuualue sisällä. Ryhmässä kasvaneet vasikat aloittivat sekä kuivien rehujen syönnin että märehtimisen nuorempina kuin yksilökarsinassa kasvaneet. Ryhmissä esiintyvää käyttäytymisongelmaa, toisten vasikoiden imemistä, voidaan vähentää hoito- ja ruokintamenetelmillä. Annettaessa vasikoiden imeä emiään rajoitetusti lypsyn jälkeen vasikat oppivat imemään emiään hyvin nopeasti. Lypsytyö vaikeutui muutamien lehmien kohdalla, sillä ne pidättivät maitoa lypsettäessä. Saadessaan imeä rajoitetusti vasikat imivät suurehkoja maitomääriä kerrallaan. Vieroittaminen suurilta maitomääriltä viiden viikon iässä oli kuitenkin liian aikaista, koska vasikat eivät vielä syöneet riittävästi kuivia rehuja. Vieroitus emästä niin viiden kuin kahdeksankin viikon iässä aiheutti vasikoissa levottomuutta ja ääntelyn lisääntymistä. Saadessaan hapatettua juomarehua vapaasti vasikat joivat keskimäärin vain vähän vettä, olipa vesilähteenä avoin ämpäri tai vesinippa. Vasikoiden välillä oli suurta vaihtelua veden juontimäärissä. Viikkoa ennen maidosta vieroitusta vasikat joivat 0-3 l vettä päivässä. Vasikat joivat nipasta kerrallaan vähemmän vettä kuin ämpäristä, ja käyttivät enemmän aikaa päivässä veden juomiseen kuin vesiämpäristä juoneet vasikat. Suurin osa vasikoista joi vettä juomanipoista erikoisella tavalla esimerkiksi painamalla nippaa otsalla ja juomalla tippuvaa vettä. Vesinipat voivat olla siis vasikoille joko vaikeita tai epämukavia käyttää. Vasikoiden juoman maitomäärän lisääntyessä kasvu lisääntyy selvästi. Runsas maidon juominen vähentää kuitenkin kuivien rehujen syöntiä ja vieroitusvaiheessa kasvu voi hidastua. Vasikat olisikin tärkeää vieroittaa vähitellen, ettei muutoksia kasvuun tulisi. Syönti- ja kasvutulokset eivät aina anna oikeaa kuvaa kasvatusmenetelmien eroista eläinten hyvinvoinnin kannalta. Käyttäytyminen on herkkä hyvinvoinnin mittari ja se tulisikin aina huomioida eri kasvatusmenetelmiä arvioitaessa. .

Digestion capasity, nutrient digestibilities and physico-chemical conditions in the intestine influenced by the age of growing turkeys

Six experiments have been conducted to examine digestibility and feeding value of domestic Finnish fibre-rich cereals (barley and oats as compared to maize and wheat) and protein sources (rapeseed meal and cake, peas, faba beans, lupin seeds) for growing turkeys and to investigate effects of age of the birds (from 3 to 12 weeks of age) on digestion process and estimated nutrient digestibility and energy values. Besides, an objective of the study was to test applications of digestibility research methodology for turkeys. Total tract digestibility and apparent metabolizable energy (AME) was assayed in experimental cages using excreta collection, and a slaughter method was applied to sample small intestinal digesta for determination of apparent ileal crude protein digestibility (AICPD), jejuno-duodenal digesta viscosity and caecal volatile fatty acid (VFA) concentration. Digesta viscosity decreased and caecal VFA production increased with age of growing turkeys. Digesta retention times in the small intestine were generally longer in the older birds than in the younger ones. Crude fat digestibility and AME increased with age of growing turkeys, especially with viscous diets. AICPD seemed to decrease with age in most cases. Supplementation with β-gucanase-xylanase decreased viscosity, improved crude fat digestibility and metabolizable energy value and increased VFA production especially in barley-fed turkeys and especially in the young birds. Poor protein digestibility and low energy value of rapeseed meal and rapeseed cake decreased their feeding value for turkeys. In addition, a typical goitrogenic effect of rapeseed feeding was detected. Use of legume seeds as feed for growing turkeys is limited mostly by the low energy value in lupin seeds and the low ileal protein and amino acid digestibility in faba beans. Digestibility of fibre-rich protein sources was not improved with age of the turkeys. Euthanizing the turkeys for AICPD determination by carbon dioxide and bleeding led to lower digestibility values than mechanical stunning and cervical dislocation, suggesting inferiority of carbon dioxide stunning in experimental use. Comparison of AICPD and AME results obtained using different markers showed that considerable differences may occur, especially on total tract level, when acid-insoluble ash gave considerably lower AME values than titanium dioxide and chromic oxide.

Vadelman (Rubus idaeus) kasvunsäätö proheksadioni-kalsiumin avulla

Vadelman (Rubus idaeus L.) viljelyala on kasvanut Suomessa voimakkaasti viimeisten viiden vuoden aikana. Vuonna 2005 vadelmaa viljeltiin 473 hehtaarilla. Vadelman satoindeksi on alhainen. Sen pääverso on pitkä, mikä hankaloittaa hoitotoimenpiteitä. Kasvin satoisimmat silmut ovat pääverson kärjessä, joten latvontaa ei kannata tehdä. Suomessakin haluttaisiin kehittää vadelman kasvihuonetuotantoa satokauden pidentämiseksi. Kasvihuonetuotannossa vegetatiivisen kasvun säätäminen on vielä tärkeämpää kuin avomaan viljelyssä. Proheksadioni-kalsium (ProCa) on gibberelliinisynteesi-inhibiittori, jonka on havaittu lyhentävän nivelvälejä sekä lisäävän versojen ja lehtien hiilihydraattipitoisuutta mm. omenalla (Malus domestica Borkh.). Tämän Helsingin yliopiston soveltavan biologian laitoksella toteutetun tutkimuksen tarkoituksena oli selvittää, miten ProCa vaikuttaa kahden kesävadelmalajikkeen ensimmäisen vuoden versojen vegetatiiviseen kasvuun ja edelleen sadontuottokykyyn. Tässä pro gradu -työssä tutkittiin ProCa:n vaikutusta kahden kesävadelmalajikkeen vegetatiiviseen kasvuun, satopotentiaaliin sekä versojen ja silmujen hiilihydraattipitoisuuksiin kesällä 2005 ja talvella 2006. Koetaimina oli 120 Tulameen-lajikkeen ja 150 Glen Ample -lajikkeen tainta. Taimet käsiteltiin kesäkuussa ja käsittely uusittiin osalle taimista neljän viikon kuluttua ensimmäisestä käsittelystä. Koekäsittelyitä oli neljä: ProCa 100 ppm, ProCa 200 ppm, ProCa 100 ppm + ProCa 100 ppm ja ProCa 200 ppm + ProCa 200 ppm. Kontrollikäsittelyitä oli kaksi: vesi sekä vesi + vesi. Kesän aikana havainnoitiin pääverson pituuskasvua ja nivelien määrää. Kesän kasvatuskauden päätyttyä Glen Ample -lajikkeen silmujen ja versojen liukoiset hiilihydraatit ja tärkkelys määritettiin entsymaattisesti. Kylmävarastoinnin jälkeen (71 vrk) tammikuussa 2006 taimet siirrettiin hyötöön kasvihuoneeseen. Hyödön aikana havainnoitiin silmujen puhkeamista ja kukintaa. Hyödön päättyessä hanka- ja pääversojen kuivapaino sekä hankaversojen pituus mitattiin. Kesän 2005 aikana ProCa lyhensi uusien nivelvälien pituuksia väliaikaisesti 1 4 viikon kuluttua käsittelystä. Nivelien lukumäärässä ei tapahtunut suuria muutoksia. Tulameen-lajikkeella kasvu kiihtyi käsittelyn vaikutuksen loputtua. Nivelvälien lyhentymisen takia pääverson kokonaispituus jäi kontrolliin verrattuna 35 % lyhyemmäksi Glen Ample -lajikkeella (ProCa 200 + ProCa 200) ja 14 % lyhyemmäksi Tulameen-lajikkeella samalla käsittelyllä. Myös käsittely ProCa 200 vähensi pääverson pituutta 6 % kontrolliin verrattuna Tulameen-lajikkeella. ProCa-käsittely lisäsi versojen ja silmujen hiilihydraattipitoisuuksia, mutta tuloksissa oli paljon hajontaa. Glen Ample -lajikkeella kaksinkertaiset käsittelyt vähensivät puhjenneiden silmujen osuutta 8 15 päivän kuluttua hyödön aloittamisesta 24 29 %, mutta käsittelyiden väliset erot tasoittuivat hyödön loppuun mennessä. Lisäksi kaksinkertaiset ProCa-käsittelyt vähensivät kukkien määrää 29 44 % 33 65 päivää hyödön alusta, mutta erot tasoittuivat hyödön loppuun mennessä. Käsittelyt eivät vaikuttaneet Tulameen-lajikkeen silmujen puhkeamiseen ja kukintaan. Satopotentiaalissa ei ollut eroa ProCa-käsittelyiden välillä kummallakaan lajikkeella. Glen Ample -lajikkeella hankaversojen kokonaismäärä väheni 27 32 % kasveilla, joita oli käsitelty kaksi kertaa ProCa:lla. Hankaversot olivat kuitenkin vastaavasti 29 43 % pidempiä. Tulameen-lajikkeella ProCa 100 -käsittely vähensi hankaversojen määrää 15 %, mutta hankaversojen pituuteen käsittelyillä ei ollut vaikutusta. Käsittelyillä ei ollut vaikutusta hankaversojen nivelvälien pituuteen kummallakaan lajikkeella. Tutkimuksen perusteella kesällä annetulla ProCa-käsittelyllä voidaan lyhentää pääverson pituutta, mutta satopotentiaaliin käsittelyllä ei ole vaikutusta. Käsittelyajankohta on kriittinen, koska kukkasilmujen kehitys näyttäisi häiriintyvän, jos ruiskutus tehdään loppukesällä.

Diet, cell signalling, and tumourigenesis in multiple intestinal neoplasia mice

The incidence of colon cancer is high in Western societies, and in Finland it is among the three most common cancer types in both females and males. Environmental factors, including diet, affect colon cancer development. During the last few years, a vast amount of new, functional foods have been introduced to the consumers. Several products are already available that are marketed as promoting intestinal health. To be able to reliably call a dietary compound a chemopreventive substance it is of fundamental importance to understand the mechanism by which it affects tumour formation and the integrity of the epithelial cells. In this thesis, three different dietary compounds were studied in an experimental model of colon cancer. Inulin is a non-digestible fibre found naturally in chicory roots, artichokes and onions, amongst others. Nowadays it is widely used as an added dietary fibre in several food products. Conjugated linoleic acid (CLA) is a conjugated form of the fatty acid linoleic acid. CLA is formed by bacterial fermentation of linoleic acid in the rumen of cows and other ruminants. Concomitantly, it can naturally be found in milk and meat of ruminants. White currant is a colourless berry low in phenolic compounds that are believed to prevent cancer formation. Contrary to what was expected, inulin and the conjugated linoleic acid isomer trans-10, cis-12, were tumour growth promoting dietary constituents when fed to Min mice. Both diets decreased the NF-kappaB levels in the mucosa, but physiological adenoma development did not affect NF-kappaB. Diet altered beta-catenin and p53 signalling in the adenomas, confirming their involvement in adenoma growth. White currant, on the other hand, was chemopreventive, despite its low contents of phenolic compounds. The chemopreventive effect was accompanied by increased p53 levels in the mucosa, and decreased beta-catenin and NF-kappaB levels in the adenoma. This could explain the reduced adenoma number and size. The results underline the importance of carefully testing new dietary compounds in different settings to reliably confirm their health benefits. In this study two compounds that are consumed and believed to add to our health proved to be cancer promotive. A berry with low phenolic contents, on the other hand, was chemopreventive.

Essays on the Bioeconomics of the Northern Baltic Fisheries

World marine fisheries suffer from economic and biological overfishing: too many vessels are harvesting too few fish stocks. Fisheries economics has explained the causes of overfishing and provided a theoretical background for management systems capable of solving the problem. Yet only a few examples of fisheries managed by the principles of the bioeconomic theory exist. With the aim of bridging the gap between the actual fish stock assessment models used to provide management advice and economic optimisation models, the thesis explores economically sound harvesting from national and international perspectives. Using data calibrated for the Baltic salmon and herring stocks, optimal harvesting policies are outlined using numerical methods. First, the thesis focuses on the socially optimal harvest of a single salmon stock by commercial and recreational fisheries. The results obtained using dynamic programming show that the optimal fishery configuration would be to close down three out of the five studied fisheries. The result is robust to stock size fluctuations. Compared to a base case situation, the optimal fleet structure would yield a slight decrease in the commercial catch, but a recreational catch that is nearly seven times higher. As a result, the expected economic net benefits from the fishery would increase nearly 60%, and the expected number of juvenile salmon (smolt) would increase by 30%. Second, the thesis explores the management of multiple salmon stocks in an international framework. Non-cooperative and cooperative game theory are used to demonstrate different "what if" scenarios. The results of the four player game suggest that, despite the commonly agreed fishing quota, the behaviour of the countries has been closer to non-cooperation than cooperation. Cooperation would more than double the net benefits from the fishery compared to a past fisheries policy. Side payments, however, are a prerequisite for a cooperative solution. Third, the thesis applies coalitional games in the partition function form to study whether the cooperative solution would be stable despite the potential presence of positive externalities. The results show that the cooperation of two out of four studied countries can be stable. Compared to a past fisheries policy, a stable coalition structure would provide substantial economic benefits. Nevertheless, the status of the salmon stocks would not improve significantly. Fourth, the thesis studies the prerequisites for and potential consequences of the implementation of an individual transferable quota (ITQ) system in the Finnish herring fishery. Simulation results suggest that ITQs would result in a decrease in the number of fishing vessels, but enables positive profits to overlap with a higher stock size. The empirical findings of the thesis affirm that the profitability of the studied fisheries could be improved. The evidence, however, indicates that incentives for free riding exist, and thus the most preferable outcome both in economic and biological terms is elusive.

Median muotoilema : Muotoilun mediajulkisuus suomalaisessa talouslehdistössä

Designed by the Media The Media publicity of Design in the Finnish Economic Press The meaning of design has increased in consumer societies. Design is the subject of debate and the number of media discussions has also increased steadily. Especially the role of industrial design has been emphasised. In this study I examine the media publicity of design in the Finnish economic press from the late 1980s to the beginning of the 2000s. The research question is connected to media representations: How is design represented in the Finnish economic press? In other words, what are the central topics of design in the economic press, and to what issues are the media debates connected? The usually repeated phrase that design discussions take place only on the cultural pages of the daily press or in cultural contexts is being changed. Design is also linked to the consumer culture and consumers everyday practices. The research material has been collected from the Finnish economic press. The qualitative sample consists of articles from Kauppalehti, Taloussanomat and from several economic papers published by the Talentum Corporation. The approach of the research is explorative, descriptive and hermeneutic. This means that the economic press articles are used to explore how design is represented in the media. In addition, the characteristics of design represented in the media are described in detail. The research is based on the interpretive tradition of studying textual materials. Background assumptions are thus grounded in hermeneutics. Erving Goffman s frame analysis is applied in analysing the economic press materials. The frames interpreted from the articles depict the media publicity of design in the Finnish economic press. The research opens up a multidimensional picture of design in the economic press. The analysis resulted in five frames that describe design from various points of view. In the personal frame designers are described in private settings and through their personal experiences. The second frame relates to design work. In the frame of mastery of the profession, the designers work is interpreted widely. Design is considered from the aspects of controlling personal know-how, co-operation and the overall process of design. The third frame is connected to the actual substance of the economic press. In the frame of economy and market, design is linked to international competitiveness, companies competitive advantage and benefit creation for the consumers. The fourth frame is connected to the actors promoting design on a societal level. In the communal frame, the economic press describes design policy, design research and education and other actors that actively develop design in the societal networks. The last frame is linked to the traditions of design and above all to the examination of the cultural transition. In the frame of culture the traditions of design are emphasised. Design is also connected to the industrial culture and furthermore to the themes of the consumer culture. It can be argued that the frames construct media publicity of design from various points of view. The frames describe situations, action and the actors of design. The interpreted media frames make it possible to understand the relation of interpreted design actions and the culture. Thus, media has a crucial role in representing and recreating meanings related to design. The publicity of design is characterised by the five focal themes: personification, professionalisation, commercialisation, communalisation and transition of cultural focus from the traditions of design to the industrial culture and the consumer culture. Based on my interpretation these themes are guided by the mediatisation of design. The design phenomenon is defined more often on the basis of the media representations in the public discourses. The design culture outlined in this research connects socially constructed and structurally organised action. Socially constructed action in design is connected to the experiences, social recreation and collective development of design. Structurally, design is described as professional know-how, as a process and as an economic profit generating action in the society. The events described by the media affect the way in which people experience the world, the meanings they connect to the events around themselves and their life in the world. By affecting experiences, the media indirectly affects human actions. People have become habituated to read media representations on a daily basis, but they are not used to reading and interpreting the various meanings that are incorporated in the media texts.

Novel Organo-Noble-Gas Hydrides

Noble gases are mostly known as inert monatomic gases due to their limited reactivity with other elements. However, the first predictions of noble-gas compounds were suggested by Kossel in 1916, by von Antropoff in 1924, and by Pauling in 1930. It took many decades until the first noble-gas compound, XePtF6, was synthesized by Neil Bartlett in 1962. This was followed by gradual development of the field and many noble-gas compounds have been prepared. In 1995, a family of noble-gas hydride molecules was discovered at the University of Helsinki. These molecules have the general formula of HNgY, where H is a hydrogen atom, Ng is a noble-gas atom (Ar, Kr, or Xe), and Y is an electronegative fragment. The first molecular species made include HXeI, HXeBr, HXeCl, HKrCl and HXeH. Nowadays the total number of prepared HNgY molecules is 23 including both inorganic and organic compounds. The first and only neutral ground-state argon compound, HArF, was synthetized in 2000. Helium and neon are the only elements in the periodic table that do not form neutral, ground-state molecules. In this Thesis, experimental preparation of eight novel xenon- and krypton-containing organo-noble-gas hydrides made from acetylene (HCCH), diacetylene (HCCCCH) and cyanoacetylene (HCCCN) are presented. These novel species include the first organic krypton compound, HKrCCH, as well as the first noble-gas hydride molecule containing two Xe atoms, HXeCCXeH. Other new compounds are HXeCCH, HXeCC, HXeC4H, HKrC4H, HXeC3N, and HKrC3N. These molecules are prepared in noble-gas matrices (krypton or xenon) using ultraviolet photolysis of the precursor molecule and thermal mobilization of the photogenerated H atoms. The molecules were identified using infrared spectroscopy and ab initio calculations. The formation mechanisms of the organo-noble-gas molecules are studied and discussed in this context. The focus is to evidence experimentally the neutral formation mechanisms of HNgY molecules upon global mobility of H atoms. The formation of HXeCCXeH from another noble-gas compound (HXeCC) is demonstrated and discussed. Interactions with the surrounding matrix and molecular complexes of the HXeCCH molecule are studied. HXeCCH was prepared in argon and krypton solids in addition to a Xe matrix. The weak HXeCCH∙∙∙CO2 complex is prepared and identified. Preparation of the HXeCCH∙∙∙CO2 complex demonstrates an advanced approach to studies of HNgY complexes where the precursor complex (HCCH∙∙∙CO2) is obtained using photolysis of a larger molecule (propiolic acid).

Kemian ylioppilaskokeen tehtävät summatiivisen arvioinnin välineenä

The main purpose of the research was to illustrate chemistry matriculation examination questions as a summative assessment tool, and represent how the questions have evolved over the years. Summative assessment and its various test item classifications, Finnish goal-oriented curriculum model, and Bloom’s Revised Taxonomy of Cognitive Objectives formed the theoretical framework for the research. The research data consisted of 257 chemistry questions from 28 matriculation examinations between 1996 and 2009. The analysed test questions were formulated according to the national upper secondary school chemistry curricula 1994, and 2003. Qualitative approach and theory-driven content analysis method were employed in the research. Peer review was used to guarantee the reliability of the results. The research was guided by the following questions: (a) What kinds of test item formats are used in chemistry matriculation examinations? (b) How the fundamentals of chemistry are included in the chemistry matriculation examination questions? (c) What kinds of cognitive knowledge and skills do the chemistry matriculation examination questions require? The research indicates that summative assessment was used diversely in chemistry matriculation examinations. The tests included various test item formats, and their combinations. The majority of the test questions were constructed-response items that were either verbal, quantitative, or experimental questions, symbol questions, or combinations of the aforementioned. The studied chemistry matriculation examinations seldom included selected-response items that can be either multiple-choice, alternate choice, or matching items. The relative emphasis of the test item formats differed slightly depending on whether the test was a part of an extensive general studies battery of tests in sciences and humanities, or a subject-specific test. The classification framework developed in the research can be applied in chemistry and science education, and also in educational research. Chemistry matriculation examinations are based on the goal-oriented curriculum model, and cover relatively well the fundamentals of chemistry included in the national curriculum. Most of the test questions related to the symbolism of chemical equation, inorganic and organic reaction types and applications, the bonding and spatial structure in organic compounds, and stoichiometry problems. Only a few questions related to electrolysis, polymers, or buffer solutions. None of the test questions related to composites. There were not any significant differences in the emphasis between the tests formulated according to the national curriculum 1994 or 2003. Chemistry matriculation examinations are cognitively demanding. The research shows that the majority of the test questions require higher-order cognitive skills. Most of the questions required analysis of procedural knowledge. The questions that only required remembering or processing metacognitive knowledge, were not included in the research data. The required knowledge and skill level varied slightly between the test questions in the extensive general studies battery of tests in sciences and humanities, and subject-specific tests administered since 2006. The proportion of the Finnish chemistry matriculation examination questions requiring higher-order cognitive knowledge and skills is very large compared to what is discussed in the research literature.

Atomic Layer Deposition for optical applications: metal fluoride thin films and novel devices

Thin films of various metal fluorides are suited for optical coatings from infrared (IR) to ultraviolet (UV) range due to their excellent light transmission. In this work, novel metal fluoride processes have been developed for atomic layer deposition (ALD), which is a gas phase thin film deposition method based on alternate saturative surface reactions. Surface controlled self-limiting film growth results in conformal and uniform films. Other strengths of ALD are precise film thickness control, repeatability and dense and pinhole free films. All these make the ALD technique an ideal choice also for depositing metal fluoride thin films. Metal fluoride ALD processes have been largely missing, which is mostly due to a lack of a good fluorine precursor. In this thesis, TiF4 precursor was used for the first time as the fluorine source in ALD for depositing CaF2, MgF2, LaF3 and YF3 thin films. TaF5 was studied as an alternative novel fluorine precursor only for MgF2 thin films. Metal-thd (thd = 2,2,6,6-tetramethyl-3,5-heptanedionato) compounds were applied as the metal precursors. The films were grown at 175 450 °C and they were characterized by various methods. The metal fluoride films grown at higher temperatures had generally lower impurity contents with higher UV light transmittances, but increased roughness caused more scattering losses. The highest transmittances and low refractive indices below 1.4 (at 580 nm) were obtained with MgF2 samples. MgF2 grown from TaF5 precursor showed even better UV light transmittance than MgF2 grown from TiF4. Thus, TaF5 can be considered as a high quality fluorine precursor for depositing metal fluoride thin films. Finally, MgF2 films were applied in fabrication of high reflecting mirrors together with Ta2O5 films for visible region and with LaF3 films for UV region. Another part of the thesis consists of applying already existing ALD processes for novel optical devices. In addition to the high reflecting mirrors, a thin ALD Al2O3 film on top of a silver coating was proven to protect the silver mirror coating from tarnishing. Iridium grid filter prototype for rejecting IR light and Ir-coated micro channel plates for focusing x-rays were successfully fabricated. Finally, Ir-coated Fresnel zone plates were shown to provide the best spatial resolution up to date in scanning x-ray microscopy.

Atomic Layer Deposition of Multicomponent Oxide Materials

Atomic layer deposition (ALD) is a method for thin film deposition which has been extensively studied for binary oxide thin film growth. Studies on multicomponent oxide growth by ALD remain relatively few owing to the increased number of factors that come into play when more than one metal is employed. More metal precursors are required, and the surface may change significantly during successive stages of the growth. Multicomponent oxide thin films can be prepared in a well-controlled way as long as the same principle that makes binary oxide ALD work so well is followed for each constituent element: in short, the film growth has to be self-limiting. ALD of various multicomponent oxides was studied. SrTiO3, BaTiO3, Ba(1-x)SrxTiO3 (BST), SrTa2O6, Bi4Ti3O12, BiTaO4 and SrBi2Ta2O9 (SBT) thin films were prepared, many of them for the first time by ALD. Chemistries of the binary oxides are shown to influence the processing of their multicomponent counterparts. The compatibility of precursor volatilities, thermal stabilities and reactivities is essential for multicomponent oxide ALD, but it should be noted that the main reactive species, the growing film itself, must also be compatible with self-limiting growth chemistry. In the cases of BaO and Bi2O3 the growth of the binary oxide was very difficult, but the presence of Ti or Ta in the growing film made self-limiting growth possible. The application of the deposited films as dielectric and ferroelectric materials was studied. Post-deposition annealing treatments in different atmospheres were used to achieve the desired crystalline phase or, more generally, to improve electrical properties. Electrode materials strongly influenced the leakage current densities in the prepared metal insulator metal (MIM) capacitors. Film permittivities above 100 and leakage current densities below 110-7 A/cm2 were achieved with several of the materials.

Copper Diffusion Barrier Deposition on Integrated Circuit Devices by Atomic Layer Deposition Technique

Transfer from aluminum to copper metallization and decreasing feature size of integrated circuit devices generated a need for new diffusion barrier process. Copper metallization comprised entirely new process flow with new materials such as low-k insulators and etch stoppers, which made the diffusion barrier integration demanding. Atomic Layer Deposition technique was seen as one of the most promising techniques to deposit copper diffusion barrier for future devices. Atomic Layer Deposition technique was utilized to deposit titanium nitride, tungsten nitride, and tungsten nitride carbide diffusion barriers. Titanium nitride was deposited with a conventional process, and also with new in situ reduction process where titanium metal was used as a reducing agent. Tungsten nitride was deposited with a well-known process from tungsten hexafluoride and ammonia, but tungsten nitride carbide as a new material required a new process chemistry. In addition to material properties, the process integration for the copper metallization was studied making compatibility experiments on different surface materials. Based on these studies, titanium nitride and tungsten nitride processes were found to be incompatible with copper metal. However, tungsten nitride carbide film was compatible with copper and exhibited the most promising properties to be integrated for the copper metallization scheme. The process scale-up on 300 mm wafer comprised extensive film uniformity studies, which improved understanding of non-uniformity sources of the ALD growth and the process-specific requirements for the ALD reactor design. Based on these studies, it was discovered that the TiN process from titanium tetrachloride and ammonia required the reactor design of perpendicular flow for successful scale-up. The copper metallization scheme also includes process steps of the copper oxide reduction prior to the barrier deposition and the copper seed deposition prior to the copper metal deposition. Easy and simple copper oxide reduction process was developed, where the substrate was exposed gaseous reducing agent under vacuum and at elevated temperature. Because the reduction was observed efficient enough to reduce thick copper oxide film, the process was considered also as an alternative method to make the copper seed film via copper oxide reduction.

Beasts on Fields. Human-Wildlife Conflicts in Nature-Culture Borderlands

Human-wildlife conflicts are today an integral part of the rural development discourse. In this research, the main focus is on the spatial explanation which is not a very common approach in the reviewed literature. My research hypothesis is based on the assumption that human-wildlife conflicts occur when a wild animal crosses a perceived borderline between the nature and culture and enters into the realms of the other. The borderline between nature and culture marks a perceived division of spatial content in our senses of place. The animal subject that crosses this border becomes a subject out of place meaning that the animal is then spatially located in a space where it should not be or where it does not belong according to tradition, custom, rules, law, public opinion, prevailing discourse or some other criteria set by human beings. An appearance of a wild animal in a domesticated space brings an uncontrolled subject into that space where humans have previously commanded total control of all other natural elements. A wild animal out of place may also threaten the biosecurity of the place in question. I carried out a case study in the Liwale district in south-eastern Tanzania to test my hypothesis during June and July 2002. I also collected documents and carried out interviews in Dar es Salaam in 2003. I studied the human-wildlife conflicts in six rural villages, where a total of 183 persons participated in the village meetings. My research methods included semi-structured interviews, participatory mapping, questionnaire survey and Q- methodology. The rural communities in the Liwale district have a long-history of co-existing with wildlife and they still have traditional knowledge of wildlife management and hunting. Wildlife conservation through the establishment of game reserves during the colonial era has escalated human-wildlife conflicts in the Liwale district. This study shows that the villagers perceive some wild animals differently in their images of the African countryside than the district and regional level civil servants do. From the small scale subsistence farmers point of views, wild animals continue to challenge the separation of the wild (the forests) and the domestics spaces (the cultivated fields) by moving across the perceived borders in search of food and shelter. As a result, the farmers may loose their crops, livestock or even their own lives in the confrontations of wild animals. Human-wildlife conflicts in the Liwale district are manifold and cannot be explained simply on the basis of attitudes or perceived images of landscapes. However, the spatial explanation of these conflicts provides us some more understanding of why human-wildlife conflicts are so widely found across the world.