The Phraseology and Structure of Latin Building Inscriptions in Roman North Africa

This study analyses the diction of Latin building inscriptions. Despite its importance, this topic has rarely been discussed before: the most substantial contribution on the subject is a short dissertation by Klaus Gast (1965) that focuses on 100 inscriptions dating mostly from the Republican period. Marietta Horster (2001) also touched upon this theme in her thesis on imperial building inscriptions. I have collected my source material in North Africa because more Latin building inscriptions dating from the Imperial period have survived there than in any other area of the Roman Empire. By means of a thorough and independent survey, I have assembled all relevant African Latin building inscriptions datable to the Roman period (between 146 BC and AD 425), 1002 texts, into a corpus. These inscriptions are all fully edited in Appendix 1; Appendix 2 contains references to earlier editions. To facilitate search operations, both are also available in electronic form. They are downloadable from the address http://www.helsinki.fi/hum/kla/htm/jatkoopinnot.htm. Chapter one is an introduction dealing with the nature of building inscriptions as source material. Chapter two offers a statistical overview of the material. The following main section of the work falls into five chapters, each of which analyses one main part of a building inscription. An average building inscription can be divided into five parts: the starting phrase opens the inscription (a dedication to gods, for example), the subject part identifies the builder, the object part describes the constructed or repaired building, the predicate part records the building activity and the supplement part offers additional information on the project (it can specify the funding, for instance). These chapters are systematic and chronological and their purpose is to register and interpret the phrases used, to analyse reasons for their use and for their popularity among the different groups of builders. Chapter eight, which follows the main section of the work, creates a typology of building inscriptions based on their structure. It also presents the most frequently attested types of building inscriptions. The conclusion describes, on a general level, how the diction of building inscriptions developed during the period of study and how this striking development resulted from socio-economic changes that took place in Romano-African society during Antiquity. This study shows that the phraseology of building inscriptions had a clear correlation both with the type of builder and with the date of carving. Private builders tended to accentuate their participation (especially its financial side) in the project; honouring the emperor received more emphasis in the building inscriptions set up by communities; the texts produced by the army were concise. The chronological development is so clear that it enables stylistic dating. At the beginning of the imperial period the phrases were clear, concrete, formal and stereotyped but by Late Antiquity they have become vague, subjective, flexible, varied and even rhetorically or poetically coloured.

Kansakunnan parhaaksi. : Suomalaiset naisten- ja lastensairaalat 1920 1940-luvulla arkkitehtonisena, lääketieteellisenä ja yhteiskunnallisena suunnittelukohteena

This dissertation addresses the modernization process of Finnish hospital architecture between the First and Second World War, with focus on facilities explicitly designed for women and children, which as special hospitals reflect specialization, a distinct feature of the modern era. The facilities considered in the study are the Salus hospital, Dr. Länsimäki s women s hospital, the Folkhälsan in Svenska Finland association s child-care institute, the Helsinki Women s Clinic, the Viipuri Women s Hospital, the Helsinki Children s Clinic and the Children's Castle (Lastenlinna) in Helsinki. The study considers hospital architecture as an architectural, medical and social object of design. The theoretical starting point and perspective are the views of the French philosopher and historian Michel Foucault (1925 1983) concerning the relationship of bio-power and architecture. Underlying the construction of health-care facilities for women and children were not only the desire to help but also issues of population policy, social policies, training and professionalization. In this study, hospital architecture is interpreted as reflecting developments in medicine, while also producing and reinforcing discourses associated with the ideologies of the time of design and construction. The results of the present research provide new information on the field of hospital design. The design of hospitals was no longer the sole prerogative of architects. Instead, modern hospital design involved the collaboration and networking of experts in various fields. During the period studied, the pavilion system was incorporated in hospital architecture in the block system, which was regarded as a rational. Rationalization was implemented upon the conditions of medical work. This led to spatial design in accordance with medical practices, through which norms were reinforced and created. An important aspect of the material is that the requirements of light, air, openness and hygiene created architecture in glass of an x-ray character, strongly associated with the element of discipline. The alliance of hygiene and architecture became a strategy for controlling the behaviour and encounters of people, for producing pedagogical and moral hygiene, and for reinforcing class hygiene. The modern hospital building also had to meet the requirements of aesthetic hygiene. Health-care facilities designed for women and children became production-oriented machinery, instruments for producing a healthy population and for reinforcing medical discourses.

Stone Weathering in the Monastic Building Complex on Mountain of St Aaron in Petra, Jordan.

Since 1997 the Finnish Jabal Haroun Project (FJHP) has studied the ruins of the monastery and pilgrimage complex (Gr. oikos) of Aaron located on a plateau of the Mountain of Prophet Aaron, Jabal an-Nabi Harûn, ca. 5 km to the south-west of the UNESCO World Heritage site of Petra in Jordan. The state of conservation and the damaging processes affecting the stone structures of the site are studied in this M.A. thesis. The chapel was chosen as an example, as it represents the phasing and building materials of the entire site. The aim of this work is to act as a preliminary study with regards to the planning of long-term conservation at the site. The research is empirical in nature. The condition of the stones in the chapel walls was mapped using the Illustrated Glossary on Stone Deterioration, by the ICOMOS International Scientific Committee for Stone. This glossary combines several standards and systems of damage mapping used in the field. Climatic conditions (temperature and RH %) were monitored for one year (9/2005-8/2006) using a HOBO Microstation datalogger. The measurements were compared with contemporary measurements from the nearest weather station in Wadi Musa. Salts in the stones were studied by taking samples from the stone surfaces by scraping and with the “Paper Pulp”-method; with a poultice of wet cellulose fiber (Arbocel BC1000) and analyzing what main types of salts were to be found in the samples. The climatic conditions on the mountain were expected to be rapidly changing and to differ clearly from conditions in the neighboring areas. The rapid changes were confirmed, but the values did not differ as much as expected from those nearby: the 12 months monitored had average temperatures and were somewhat drier than average. Earlier research in the area has shown that the geological properties of the stone material influence its deterioration. The damage mapping showed clearly, that salts are also a major reason for stone weathering. The salt samples contained several salt combinations, whose behavior in the extremely unstable climatic conditions is difficult to predict. Detailed mapping and regular monitoring of especially the structures, that are going remain exposed, is recommended in this work.

My Fair Lady på skandinaviska : En studie i funktionell sångöversättning

The dissertation presents a functional model for analysis of song translation. The model is developed on the basis of an examination of theatrical songs and a comparison of three translations: the songs of the Broadway musical My Fair Lady (Lerner and Loewe, 1956), made for the premiere productions (1959–1960) in Swedish, Danish, and Norwegian. The analysis explores the three challenges of a song translator: the fitting of a text to existing music, the consideration of a prospective sung performance, and the verbal approximation of the content of the source lyric. The theoretical foundation is based on a functional approach to translation studies (Christiane Nord) and a structuralist/semiotic analysis of a theatrical message (Ivo Osolsobě, building on Roman Jakobson). Thus, three functional levels in the fitting of a text to music are explored: first, a prosodic/phonetic format; secondly, a poetic/rhetoric format; and thirdly, semantic/reflexive values (verbalizing musical expression). Similarly, three functional levels in the textual connections to a prospective performance are explored: first, a presentational goal; secondly, the theatrical potential; and thirdly, dramaturgic values (for example dramatic information and linguistic register). The functionality of Broadway musical theatre songs is analyzed, and the song score of My Fair Lady, source and target lyrics, is studied, with an in-depth analysis of seven of the songs. The three translations were all considered very well-made and are used in productions of the musical to this day. The study finds that the song translators appear to have worked from an understanding of the presentational goal, designed their target texts on the prosodic and poetic shape of the music, and pursued the theatrical functionality of the song, not by copying, but by recreating connections to relevant contexts, partly independently of the source lyrics, using the resources of the target languages. Besides metaphrases (closest possible transfer), paraphrases and additions seem normally to be expected in song translation, but song translators may also follow highly individual strategies – for example, the Norwegian translator is consistently more verbally faithful than the Danish and Swedish translators. As a conclusion, it is suggested that although linguistic and cultural difference play a significant role, a translator’s solution must nevertheless be arrived at, and assessed, in relation to the song as a multimedial piece of material. As far as a song can be considered a theatrical message – singers representing the voice, person, and situation of the song – the descriptive model presented in the study is also applicable to the translation of other types of song.

Damp building moulds: Assessment of sensitization in patients and studies into mechanisms of airway inflammation using experimental models

Exposure to water-damaged buildings and the associated health problems have evoked concern and created confusion during the past 20 years. Individuals exposed to moisture problem buildings report adverse health effects such as non-specific respiratory symptoms. Microbes, especially fungi, growing on the damp material have been considered as potential sources of the health problems encountered in these buildings. Fungi and their airborne fungal spores contain allergens and secondary metabolites which may trigger allergic as well as inflammatory types of responses in the eyes and airways. Although epidemiological studies have revealed an association between damp buildings and health problems, no direct cause-and-effect relationship has been established. Further knowledge is needed about the epidemiology and the mechanisms leading to the symptoms associated with exposure to fungi. Two different approaches have been used in this thesis in order to investigate the diverse health effects associated with exposure to moulds. In the first part, sensitization to moulds was evaluated and potential cross-reactivity studied in patients attending a hospital for suspected allergy. In the second part, one typical mould known to be found in water-damaged buildings and to produce toxic secondary metabolites was used to study the airway responses in an experimental model. Exposure studies were performed on both naive and allergen sensitized mice. The first part of the study showed that mould allergy is rare and highly dependent on the atopic status of the examined individual. The prevalence of sensitization was 2.7% to Cladosporium herbarum and 2.8% to Alternaria alternata in patients, the majority of whom were atopic subjects. Some of the patients sensitized to mould suffered from atopic eczema. Frequently the patients were observed to possess specific serum IgE antibodies to a yeast present in the normal skin flora, Pityrosporum ovale. In some of these patients, the IgE binding was partly found to be due to binding to shared glycoproteins in the mould and yeast allergen extracts. The second part of the study revealed that exposure to Stachybotrys chartarum spores induced an airway inflammation in the lungs of mice. The inflammation was characterized by an influx of inflammatory cells, mainly neutrophils and lymphocytes, into the lungs but with almost no differences in airway responses seen between the satratoxin producing and non-satratoxin producing strain. On the other hand, when mice were exposed to S. chartarum and sensitized/challenged with ovalbumin the extent of the inflammation was markedly enhanced. A synergistic increase in the numbers of inflammatory cells was seen in BAL and severe inflammation was observed in the histological lung sections. In conclusion, the results in this thesis imply that exposure to moulds in water damaged buildings may trigger health effects in susceptible individuals. The symptoms can rarely be explained by IgE mediated allergy to moulds. Other non-allergic mechanisms seem to be involved. Stachybotrys chartarum is one of the moulds potentially responsible for health problems. In this thesis, new reaction models for the airway inflammation induced by S. chartarum have been found using experimental approaches. The immunological status played an important role in the airway inflammation, enhancing the effects of mould exposure. The results imply that sensitized individuals may be more susceptible to exposure to moulds than non-sensitized individuals.

Global and EU governance for sustainable forest management with special reference to capacity building in Ethiopia and Southern Sudan

The purpose of this study was to produce information on and practical recommendations for informed decision-making on and capacity building for sustainable forest management (SFM) and good forest governance. This was done within the overall global framework for sustainable development with special emphasis on the EU and African frameworks and on Southern Sudan and Ethiopia in particular. The case studies on Southern Sudan and Ethiopia focused on local, national and regional issues. Moreover, this study attempted to provide both theoretical and practical new insight. The aim was to build an overall theoretical framework and to study its key contents and main implications for SFM and good forest governance at all administration levels, for providing new tools for capacity building in natural resources management. The theoretical framework and research approach were based on the original research problem and the general and specific aims of the study. The key elements of the framework encompass sustainable development, global and EU governance, sustainable forest management (SFM), good forest governance, as well as international and EU law. The selected research approach comprised matrix-based assessment of international, regional (EU and Africa) and national (Southern Sudan and Ethiopia) policy and legal documents. The specific case study on Southern Sudan also involved interviews and group discussions with local community members and government officials. As a whole, this study attempted to link the global, regional, national and local levels in forest-sector development and especially to analyse how the international policy development in environmental and forestry issues is reflected in field-level progress towards SFM and good forest governance, for the specific cases of Southern Sudan and Ethiopia. The results on Southern Sudan focused on the existing situation and perceived needs in capacity building for SFM and good forest governance at all administration levels. Specifically, the results of the case study on Southern Sudan presented the current situation in selected villages in the northern parts of Renk County in Upper Nile State, and the implications of Multilateral Environmental Agreements (MEAs) and of the new forest policy framework for capacity building actions. The results on Ethiopia focused on training, extension, research, education and new curriculum development within higher education institutions and particularly at the Wondo Genet College of Forestry and Natural Resources (WGCF-NR), which administratively lies under Hawassa University. The results suggest that, for both cases studies, informed decision-making on and capacity building for SFM and good forest governance require comprehensive, long-term, cross-sectoral, coherent and consistent approaches within the dynamic and evolving overall global framework, including its multiple inter-linked levels. The specific priority development and focus areas comprised the establishment of SFM and good forest governance in accordance with the overall sustainable development priorities and with more focus on the international trade in forest products that are derived from sustainable and legal sources with an emphasis on effective forest law enforcement and governance at all levels. In Upper Nile State in Southern Sudan there were positive development signals such as the will of the local people to plant more multipurpose trees on farmlands and range lands as well as the recognition of the importance of forests and trees for sustainable rural development where food security is a key element. In addition, it was evident that the local communities studied in Southern Sudan also wanted to establish good governance systems through partnerships with all actors and through increased local responsibilities. The results also suggest that the implementation of MEAs at the local level in Southern Sudan requires mutually supportive and coherent approaches within the agreements as well as significantly more resources and financial and technical assistance for capacity building, training and extension. Finally, the findings confirm the importance of full utilization of the existing local governance and management systems and their traditional and customary knowledge and practices, and of new development partnerships with full participation of all stakeholders. The planned new forest law for Southern Sudan, based on an already existing new forest policy, is expected to recognize the roles of local-level actors, and it would thus obviously facilitate the achieving of sustainable forest management.

A model Integrating the Facilities Management Process with the Building End User’s Business Process (ProFacil)

The ProFacil model is a generic process model defined as a framework model showing the links between the facilities management process and the building end user’s business process. The purpose of using the model is to support more detailed process modelling. The model has been developed using the IDEF0 modelling method. The ProFacil model describes business activities from the generalized point of view as management-, support-, and core processes and their relations. The model defines basic activities in the provision of a facility. Examples of these activities are “operate facilities”, “provide new facilities”, “provide re-build facilities”, “provide maintained facilities” and “perform dispose of facilities”. These are all generic activities providing a basis for a further specialisation of company specific FM activities and their tasks. A facilitator can establish a specialized process model using the ProFacil model and interacting with company experts to describe their company’s specific processes. These modelling seminars or interviews will be done in an informal way, supported by the high-level process model as a common reference.

Building Information Modelling – Experts´ Views on Standardisation and Industry Deployment

The goal of the single building information model has existed for at least thirty years and various standards have been published leading up to the ten-year development of the Industry Foundation Classes. These have been initiatives from researchers, software developers and standards committees. Now large property owners are becoming aware of the benefits of moving IT tools from specific applications towards more comprehensive solutions. This study addresses the state of Building Information Models and the conditions necessary for them to become more widely used. It is a qualitative study based on information from a number of international experts and has asked a series of questions about the feasibility of BIMs, the conditions necessary for their success, and the role of standards with particular reference to the IFCs. Some key statements were distilled from the diverse answers received and indicate that BIM solutions appear too complex for many and may need to be applied in limited areas initially. Standards are generally supported but not applied rigorously and a range of these are relevant to BIM. Benefits will depend upon the building procurement methods used and there should be special roles within the project team to manage information. Case studies are starting to appear and these could be used for publicity. The IFCs are rather oversold and their complexities should be hidden within simple-to-use software. Inevitably major questions remain and property owners may be the key to answering some of these. A framework for presenting standards, backed up by case studies of successful projects, is the solution proposed to provide better information on where particular BIM standards and solutions should be applied in building projects.

ISO 13567 - The Proposed International Standard for Structuring Layers in Computer Aided Building Design

Layering is a widely used method for structuring data in CAD-models. During the last few years national standardisation organisations, professional associations, user groups for particular CAD-systems, individual companies etc. have issued numerous standards and guidelines for the naming and structuring of layers in building design. In order to increase the integration of CAD data in the industry as a whole ISO recently decided to define an international standard for layer usage. The resulting standard proposal, ISO 13567, is a rather complex framework standard which strives to be more of a union than the least common denominator of the capabilities of existing guidelines. A number of principles have been followed in the design of the proposal. The first one is the separation of the conceptual organisation of information (semantics) from the way this information is coded (syntax). The second one is orthogonality - the fact that many ways of classifying information are independent of each other and can be applied in combinations. The third overriding principle is the reuse of existing national or international standards whenever appropriate. The fourth principle allows users to apply well-defined subsets of the overall superset of possible layernames. This article describes the semantic organisation of the standard proposal as well as its default syntax. Important information categories deal with the party responsible for the information, the type of building element shown, whether a layer contains the direct graphical description of a building part or additional information needed in an output drawing etc. Non-mandatory information categories facilitate the structuring of information in rebuilding projects, use of layers for spatial grouping in large multi-storey projects, and storing multiple representations intended for different drawing scales in the same model. Pilot testing of ISO 13567 is currently being carried out in a number of countries which have been involved in the definition of the standard. In the article two implementations, which have been carried out independently in Sweden and Finland, are described. The article concludes with a discussion of the benefits and possible drawbacks of the standard. Incremental development within the industry, (where ”best practice” can become ”common practice” via a standard such as ISO 13567), is contrasted with the more idealistic scenario of building product models. The relationship between CAD-layering, document management product modelling and building element classification is also discussed.

Use of Standards for CAD Layers in Building

One of the central issues in making efficient use of IT in the design, construction and maintenance of buildings is the sharing of the digital building data across disciplines and lifecycle stages. One technology which enables data sharing is CAD layering, which to be of real use requires the definition of standards. This paper focuses on the background, objectives and effectiveness of the International standard ISO 13567, Organisation and naming of layers for CAD. In particular the efficiency and effectiveness of the standardisation and standard implementation process are in focus, rather than the technical details. The study was conducted as a qualitative study with a number of experts who responded to a semi-structured mail questionnaire, supplemented by personal interviews. The main results were that CAD layer standards based on the ISO standard have been implemented, particularly in northern European countries, but are not very widely used. A major problem which was identified was the lack of resources for marketing and implementing the standard as national variations, once it had been formally accepted.

The international match: Metaphors as vehicles of social identity building in cross-border mergers

This article focuses on cultural identity-building in the cross-border merger context. To provide an alternative to the dominant essentialist analyses of cultures and cultural differences, cultural identitybuilding is conceptualized as a metaphoric process. The focus is on two processes inherent in the cross-border merger context: construction of images of Us and Them and construction of images of a Common Future. Based on an analysis of a special metaphor exercise carried out in a recent Finnish–Swedish merger, the article illustrates how the metaphoric perspective reveals specific cognitive, emotional and political aspects of cultural identity-building that easily remain ‘hidden’ in the case of more traditional approaches.

Social dynamics for sustainable food systems. Actors’ orientations towards sustainability in primary production and public consumption

Abstract The modern food system and sustainable development form a conceptual combination that suggests sustainability deficits in the ways we deal with food consumption and production - in terms of economic relations, environmental impacts and nutritional status of western population. This study explores actors’ orientations towards sustainability by taking into account actors’ embedded positions within structures of the food system, actors’ economic relations and views about sustainability as well as their possibilities for progressive activities. The study looks particularly at social dynamics for sustainability within primary production and public consumption. If actors within these two worlds were to express converging orientations for sustainability, the system dynamics of the market would enable more sustainable growth in terms of production dictated by consumption. The study is based on a constructivist research approach with qualitative text analyses. The data consisted of three text corpora, the ‘local food corpus’, the ‘catering corpus’ and the ‘mixed corpus’. The local food actors were interviewed about their economic exchange relations. The caterers’ interviews dealt with their professional identity for sustainability. Finally, the mixed corpus assembled a dialogue as a participatory research approach, which was applied in order to enable researcher and caterer learning about the use of organic milk in public catering. The data were analysed for theoretically conceptualised relations, expressing behavioural patterns in actors’ everyday work as interpreted by the researcher. The findings were corroborated by the internal and external communities of food system actors. The interpretations have some validity, although they only present abstractions of everyday life and its rich, even opaque, fabric of meanings and aims. The key findings included primary producers’ social skilfulness, which enabled networking with other actors in very different paths of life, learning in order to promote one’s trade, and trusting reflectively in partners in order to extend business. These activities expanded the supply chain in a spiral fashion by horizontal and vertical forward integration, until large retailers were met for negotiations on a more equal or ‘other regarding’ basis. This kind of chain level coordination, typically building around the core of social and partnership relations, was coined as a socially overlaid network. It supported market access of local farmers, rooted in their farms, who were able to draw on local capital and labour in promotion of competitive business; the growth was endogenous. These kinds of chains – one conventional and one organic – were different from the strategic chain, which was more profit based and while highly competitive, presented exogenous growth as it depended on imported capital and local employees. However, the strategic chain offered learning opportunities and support for the local economy. The caterers exhibited more or less committed professional identity for sustainability within their reach. The facilitating and balanced approaches for professional identities dealt successfully with local and organic food in addition to domestic food, and also imported food. The co-operation with supply chains created innovative solutions and savings for the business parties to be shared. The rule-abiding approach for sustainability only made choices among organic supply chains without extending into co-operation with actors. There were also more complicated and troubled identities as juggling, critical and delimited approaches for sustainability, with less productive efforts due to restrictions such as absence of organisational sustainability strategy, weak presence of local and organic suppliers, limited understanding about sustainability and no organisational resources to develop changes towards a sustainable food system. Learning in the workplace about food system reality in terms of supply chain co-operation may prove to be a change engine that leads to advanced network operations and a more sustainable food system. The convergence between primary producers and caterers existed to an extent allowing suggestion that increased clarity about sustainable consumption and production by actors could be approached using advanced tools. The study looks for introduction of more profound environmental and socio-economic knowledge through participatory research with supply chain actors in order to promote more sustainable food systems. Summary of original publications and the authors’ contribution I Mikkola, M. & Seppänen, L. 2006. Farmers’ new participation in food chains: making horizontal and vertical progress by networking. In: Langeveld, H. & Röling N. (Eds.). Changing European farming systems for a better future. New visions for rural areas. Wageningen, The Netherlands. Wageningen Academic Publishers: 267–271. II Mikkola, M. 2008. Coordinative structures and development of food supply chains. British Food Journal 110 (2): 189–205. III Mikkola, M. 2009. Shaping professional identity for sustainability. Evidence in Finnish public catering. Appetite 53 (1): 56–65. IV Mikkola, M. 2009. Catering for sustainability: building a dialogue on organic milk. Agronomy Research 7 (Special issue 2): 668–676. Minna Mikkola has been responsible for developing the generic research frame, particular research questions, the planning and collection of the data, their qualitative analysis and writing the articles I, II, III and IV. Dr Laura Seppänen has contributed to the development of the generic research frame and article I by introducing the author to the basic concepts of economic sociology and by supporting the writing of article II with her critical comments. Articles are printed with permission from the publishers.