企业经营风险决策的组织行为学研究

This thesis has investigated the risk preferences of the Chinese company managers in kinds of simulated decision situations and their perceptions of risk concerning types of business decisions. Four studies are conducted: Study I is utility analysis. 214 company managers and 46 middle - school headmasters have responded to Utility Measurement Survey. The results indicate: (1) The risk preferences of the managers vary in the different decision situations. In most of the situations, most of the managers are risk aversion; In few situations, they are risk-seeking. (2) In some of the decision situations, there are significant differences on risk preference between business managers and school headmasters, male managers and female managers, senior managers and junior managers, managers with high qualifications and managers with low qualifications, non-state-owned firms' managers and state-owned firms' managers, medium-small sized firms' managers and large-sized firms' managers. In the other situations there aren't significant differences between them. (3) In all of the decision situations, so significant differences on risk preference are found among managers with different marriage, experience, age and education. Study II is risky decision simulation. The Risky Decision Situations Simulation Survey is administered to 82 company managers. The result indicates that firm culture, business condition, survival limit and risk preference of the superior influence the managers' risk decision-making behavior. Study III is perceptions of business decision risks. 68 company managers have filled in Decision Cases Risk Perception Inventory. The results indicate: (1) Inaccurate market analysis and prediction, instable politics and the changes of economic policy are the more risky elements to strategy decision. (2) Erroneous market analysis and prediction, appearance of new technology and the changes of market demands are the more risky elements to investment decision. (3) Poor quality control, backward technology and too large stocks are the more risky elements to production decision. (4) Shortage of development fund, wrong choice in development project and limitation of the development ability are the more risky elements to new production development decision. (5) No payment of the foreign partner's capital, the changes of national relevant policy, difficulty in marketing, too high selling prices of foreign partner's equipments are the more risky elements to joint-venture decision. (6) Unfamilarity with oneself and misjudgement in qualification of oneself are the more risky elements to personnel decision. (7) Bad market of the product, defects in product quality and the changes of consumers demands are the more risky elements to marketing decision. (8) Wrong strategy and ambiguous goals are the more risky elements to public relation decision. (9) Violation of the law, ambiguous goals and poor creation are the more risky elements to advertisement decision. (10) Deterioration of diplomatic relations, unsuitable products for foreign consumers and unfamilarity with foreign market are the more risky elements to international business decision. Study IV is structured interview. 5 company managers have answered all questions of the Interview Questionnaire. The results indicate: (1) The managers think that risks are the possible unfavourable consequences of decisions; (2) The self-ratings of the managers coordinate with the results of utility measurement; (3) The managers admit that risks always accompany bussiness decision; (4) Individual difference is found among managers on risk perception. This thesis has also pointed out the important implications of the research and discussed several further questions.

Continuous weak measurement and feedback control of a solid-state charge qubit: A physical unravelling of non-Lindblad master equation

Conventional quantum trajectory theory developed in quantum optics is largely based on the physical unravelling of a Lindblad-type master equation, which constitutes the theoretical basis of continuous quantum measurement and feedback control. In this work, in the context of continuous quantum measurement and feedback control of a solid-state charge qubit, we present a physical unravelling scheme of a non-Lindblad-type master equation. Self-consistency and numerical efficiency are well demonstrated. In particular, the control effect is manifested in the detector noise spectrum, and the effect of measurement voltage is discussed.

A study of the dependence of ferrocene diffusion on electrolyte concentration and size in a polymer medium using non-steady-state chronoamperometry

This article describes a quantitative study of the diffusion rate of ferrocene(Fc) dissolved in ploy(ethylene glycol)(PEG) medium containing MClO(4)(M = Li+, Na+, Bu(4)N(+), Hx(4)N(+)). The apparent diffusion coefficient D-app and the active concentration c(a) of Fc were simultaneously measured by using non-steady-state chronoamperometry. The D-app and c(a) of Fc have been estimated in PEG containing different concentrations and sizes of supporting electrolyte, and the dependence of D-app on ferrocene concentrations has been observed. The values of D-app decrease with increasing concentrations of Fc, increasing concentrations of LiClO4 or the ratio (O:Li) and also with 4 decreasing cation radius of the electrolyte. The temperature dependencies conform to a simple free volume model. The concentration and size of the counterion dependencies of the diffusion rate are similar to the behavior of their dependencies of ionic conductivity in polyelectrolyte.

STUDY ON MASS-TRANSPORT IN EASTMAN-AQ POLYMER FILM BY USING NON-STEADY-STATE CHRONOAMPEROMETRY AT AN ULTRAMICRODISK ELECTRODE

Non-steady-state chronoamperometry of ultramicroelectrodes is a powerful method for the study of mass transport in polymer films. This method has many advantages over the conventional methods at a macroelectrode and the steady state method at an ultramicroelectrode, which yield the most information. The apparent diffusion coefficient, D(app), and the concentration of reactant in the film, c(f), can be determined from a single experiment without knowing the thickness of the film. We studied the transport of several species such as Ru(NH3)63+, Ru(bpy)3(2+), NR and MV2+ in Eastman-AQ polymer film coated ultramicroelectrodes by using this method.

Evidences of the intertidal red alga Grateloupia turuturu in turning Vibrio parahaemolyticus into non-culturable state in the presence of light

Grateloupia turuturu, previously known as Grateloupia doryphora, has been widely reported to be an invasive algal species. There are no studies to relate the impact of its existence on its surrounding environment. In this paper, we present our results to show that about 70% of individuals collected from the field could turn Vibrio parahaemolyticus into non-culturable state on both selective (TCBS) and non-selective (2216E) culture medium in 24 h in the presence of light in live algal culture. Total bacteria counts on TCBS and 2216E plates dropped from the initial 565 (174) and 1192 (60) cfu ml(-1) respectively to zero in 24 h. This effect disappeared when the alga was grown in darkness. The same effect was not found in two other intertidal macroalgae Laminaria japonica and Palmaria palmata. Further tests showed that the settlement ability of bacteria in seawater was impaired significantly in the presence of this alga in comparison with three other algal species. (c) 2006 Elsevier B.V. All rights reserved.

Study of three elastic-plastic constitutive models by non-proportional finite deformations of OFHC copper

Experimental stress-strain data of OFHC copper first under torsion to 13% and then under torsion-tension to about 10% are used to study the characteristics of three elastic-plastic constitutive models: Chaboche's super-positional nonlinear model, Dafalias and Popov's two surface model and Watanabe and Atluri's version of the endochronic model. The three models, originally oriented for infinitesimal deformation, have been extended for finite deformation. The results show (a) the Mises-type yield surface used in the three models brings about significant departure of the predictions from the experimental data; (b) Chaboche's and Dafalias' models are easier than Watanabe and Atluri's model in determining the material parameters in them, and (c) Chaboche's and Watanabe & Atluri's models produce almost the same prediction to the data, while Dafalias' model cannot accurately predict the plastic deformations when a loading path changes in its direction. Copyright (C) 1996 Elsevier Science Ltd

Non-axisymmetric magnetostatic equilibrium with strong twisted component of magnetic field

The perturbation theory is applied further to the discussion of the equilibrium properties of a sunspot-like magnetic field with a strong twisted component. The basic state reduces to the usual one discussed extensively for the axisymmetric magnetostatic equilibrium with twisted component of magnetic field, and the perturbed state is described by two coupled equations. As the magnetic force-line is twisted, there is a magnetic tension in the azimuthal direction. In this case, the perturbed total pressure is no longer independent of the azimuthal variable θ, and the magnetic field in the dark penumbal fibril may be either stronger or weaker relatively.

The Propagation Characteristics of Microwave in a Non-Equilibrium Plasma Layer

The influence of non-equilibrium plasma layer pressure and thickness on the transmission of microwave is considered when the incidence of wave is at an arbitrary angle. The plasma is cold, weakly ionized, and steady-state. It is assumed that it is a layered media with a kind of distribution of electron number density and the microwave is a plane wave. The results show that the pressure of plasma affects the absorption of microwave deeply, and the thickness relatively weakly in a non-equilibrium plasma slab.

Numerical Analysis of the Effects of Free-Stream Thermo-Chemical State on the Test Model Flow Field in High-Enthalpy Tunnel

The effects of the free-stream thermo-chemical state on the test model flow field in the high-enthalpy tunnel are studied numerically. The properties of the free-stream, which is in thermo-chemical non-equilibrium, are determined by calculating the nozzle flow field. A free-stream with total enthalpy equal to the real one in the tunnel while in thermo-chemical equilibrium is constructed artificially to simulate the natural atmosphere condition. The flow fields over the test models (blunt cone and Apollo command capsule model) under both the non-equilibrium and the virtual equilibrium free-stream conditions are calculated. By comparing the properties including pressure, temperature, species concentration and radiation distributions of these two types of flow fields, the effects of the non-equilibrium state of the free-stream in the high-enthalpy shock tunnel are analyzed.

The Convective Instabilities in a Liquid-Vapor System with a Non-equilibrium Evaporation Interface

Rayleigh-Marangoni-B,nard instability in a system consisting of a horizontal liquid layer and its own vapor has been investigated. The two layers are separated by a deformable evaporation interface. A linear stability analysis is carried out to study the convective instability during evaporation. In previous works, the interface is assumed to be under equilibrium state. In contrast with previous works, we give up the equilibrium assumption and use Hertz-Knudsen's relation to describe the phase change under non-equilibrium state. The influence of Marangoni effect, gravitational effect, degree of non-equilibrium and the dynamics of the vapor on the instability are discussed.

Valence state change and refractive index change induced by femtosecond laser irradiation in Sm3+ doped fluoroaluminate glass

We report femtosecond laser induced valence state and refractive index change in transparent Sin(3+)-doped fluoroaluminate glass. The effect of annealing on the induced changes was studied and the thermal stability of these changes was discussed. The results show that the femtosecond laser induced valence state change is more stable than the induced refractive index change. The observed phenomenon could be applied to design the thermally erasable or stable storage medium. (c) 2007 Elsevier B.V. All rights reserved.

Compact non-binary fast adders using single-electron devices

This paper proposes compact adders that are based on non-binary redundant number systems and single-electron (SE) devices. The adders use the number of single electrons to represent discrete multiple-valued logic state and manipulate single electrons to perform arithmetic operations. These adders have fast speed and are referred as fast adders. We develop a family of SE transfer circuits based on MOSFET-based SE turnstile. The fast adder circuit can be easily designed by directly mapping the graphical counter tree diagram (CTD) representation of the addition algorithm to SE devices and circuits. We propose two design approaches to implement fast adders using SE transfer circuits the threshold approach and the periodic approach. The periodic approach uses the voltage-controlled single-electron transfer characteristics to efficiently achieve periodic arithmetic functions. We use HSPICE simulator to verify fast adders operations. The speeds of the proposed adders are fast. The numbers of transistors of the adders are much smaller than conventional approaches. The power dissipations are much lower than CMOS and multiple-valued current-mode fast adders. (C) 2009 Elsevier Ltd. All rights reserved.

An Ultra Low Power Non-volatile Memory in Standard CMOS Process for Passive RFID Tags

An ultra low power non-volatile memory is designed in a standard CMOS process for passive RFID tags. The memory can operate in a new low power operating scheme under a wide supply voltage and clock frequency range. In the charge pump circuit the threshold voltage effect of the switch transistor is almost eliminated and the pumping efficiency of the circuit is improved. An ultra low power 192-bit memory with a register array is implemented in a 0.18 mu M standard CMOS process. The measured results indicate that, for the supply voltage of 1.2 volts and the clock frequency of 780KHz, the current consumption of the memory is 1.8 mu A (3.6 mu A) at the read (write) rate of 1.3Mb/s (0.8Kb/s).