Electrospinning of multicomponent ultrathin fibrous nonwovens for semi-occlusive wound dressings

This work describes the design and assembly of multifunctional and cost-efficient composite fiber nonwovens as semi-occlusive wound dressings using a simple electrospinning process to incorporate a variety Of functional components into an Ultrathin fiber. These components include non-hydrophilic poly(L-lactide) (PLLA) as fibrous backbone, hydrophilic poly(vinyl pyrrolidone)iodine (PVP-I), TiO2 nanoparticles, zinc chloride as antimicrobial, odor-controlling, and antiphlogistic agents, respectively. The process of synthesis starts with a multicomponent solution Of PLLA, PVP, TiO2 nanoparticles plus zinc chloride, in which TiO2 nanoparticles are synthesized by in situ hydrolysis of TiO2 precursors in a PVP Solution for the sake of obtaining the particle-uniformly dispersive solution. Subsequent electrospinning generates the corresponding composite fibers. A further iodine vapor treatment to the composite fibers combines iodine with PVP to produce the PVP-I complexes. Experiments indicate that the assembled composite fibers (300-400 nm) possess the ointment-releasing characteristic and the phase-separate, core-sheath structures in which PVP-I residing in fiber Surface layer becomes the sheath, and PLLA distributing inside the fiber acts as the core.

Synthesis using electrospinning and stabilization of single layer macroporous films and fibrous networks of poly(vinyl alcohol)

We demonstrated in this paper an electrospinning technique could be employed to prepare the single layer macroporous films and fibrous networks of poly(vinyl alcohol) (PVA). A crucial element using electrospinning on the development of these electrospun structures was to shorten the distance of from the needle tip to the collector (L), which resulted in the bond of the wet fibers deposited on the collector at the junctions. The morphologies and average pore size of electrospun structures of PVA were mainly predominated by L and the time of collecting wet fibers on the collector. In addition, experimental results showed that an increase of the PVA concentration or a decrease of the applied voltage could also diminish slightly the average pore size of electrospun productions. Furthermore, a 60 degrees C absolute ethanol soak to PVA electrospun production led them to be able to stabilize in water for 1 month against disintegration. Differential scanning calorimetry (DSC) demonstrated that the 60 degrees C ethanol soak enhanced the degree of crystallinity of PVA production. The structural characteristic of macroporous films and networks in combination with their easy processability suggests potential utility in issue engineering applications.

Mesoscopic simulation of the impregnating process of unidirectional fibrous preform in resin transfer molding

The resin transfer molding has gained popularity in the preparation of fiber-reinforced polymer-matrix composites because of its high efficiency and low pollution. The non-uniform inter-tow and intra-tow flows are regarded as the reason of void formation in RTM. According to the process characteristics, the axisymmetric model was developed to study the interaction between the flow in the inter-tow space and that in the intra-tow space. The flow behavior inside the fiber tows was formulated using Brinkman's equation, while that in the open space around the fiber tows was formulated by Stokes' equation. The volume of fluid (VOF) method was applied to track the flow front, and the effects of filling velocity, resin viscosity, inter-tow dimension and intra-tow permeability on fluid pressure and flow front were analyzed. The results show that the flow front difference between the inter-tow and intra-tow becomes larger with the decrease of intra-tow permeability, as well as the increase of filling velocity and inter-tow dimension.

纤维复合材料刚度设计的力学原理及其应用

针对航空用纤维复合材料,基于纤维与基体的协调变形规律和材料应变能密度的计算,导出了纤维复合材料的刚度表达式,研究了刚度矩阵的基本力学特性,给出了复合材料刚度矩阵元素与基体材料的刚度、纤维束的刚度及铺设方向的关系,提供了平面铺层和三维取向纤维复合材料的基本刚度设计公式和设计方法.最后给出工程应用设计方法的几个具体例子,并与其他理论和实验结果进行了对比.研究结果表明,在考虑材料制备工艺缺陷造成的刚度折减后,本文提出的设计公式及方法可应用于纤维复合材料的优化设计.

几种不同产地软玉的岩相结构和无破损成分分析

利用质子激发X射线荧光（PIXE）、X射线衍射（XRD）、扫描电子显微镜（SEM）以及激光拉曼光谱（LRS）技术对几个来自中国新疆、俄罗斯、加拿大和新西兰等地的软玉样品的进行了岩石矿物学特征分析,从成分组成和微观织构方面比较了各地软玉的不同特征.实验结果显示了软玉作为透闪石质玉石,随着Fe2O3含量的增加,逐步向阳起石过渡.中国和田玉以其特有的毛毡状纤维交织结构,形成了均匀细腻、油脂光泽的表面特征.无破损成分分析方法为研究贵重的古玉样品提供了技术支持.

拟南芥AST基因的精细作图

拟南芥ast (anthocyanin spotted testa) 突变体是由碳离子束诱导产生的与花青苷生物合成有关的突变体，受单隐性核基因控制。由于花青苷的异常积累，突变体未成熟种子的种皮呈现紫红色的斑点;野生型植株幼嫩的种皮没有花青苷的异常积累，呈淡绿色。初步作图分析表明，AST基因定位于拟南芥第I号染色体上，并且位于SSLP分子标记nga280和CAPS分子标记PAB5之间。 AST基因与SSLP分子标记nga280紧密连锁，遗传距离为3.2cM;与CAPS分子标记PAB5相距较远，遗传距离为21.1cM。 采用DDRT-PCR的策略，分析野生型与突变型植株未成熟角果中基因表达的差异。通过调整DDRT-PCR中总RNA、锚定引物、随机引物、cDNA和dNTP等关键试剂的用量，优化了适用于银染检测的DDRT-PCR方法。PCR扩增产物经6%变性聚丙烯酰胺凝胶垂直电泳分离后，银染能检测到多而清晰的条带。泳道中的条带数最少为40个，最多达80个，平均为60个，条带大小分布在100bp-900bp范围，银染的灵敏度为5pg/mm2。此方法操作简便快速，灵敏度高，重复性好。采用这个改良的的方法，分析了拟南芥野生型和ast突变型植株未成熟角果中16,000个cDNA扩增产物条带，从中筛选出28个差异条带。二次PCR扩增后，进一步筛选出10个差异表达的cDNA条带，其中6个是野生型特异表达的，4个是突变型特异表达的。对这10个差异片段进行测序。BLASTN分析表明，这10个差异表达的cDNA片段与数据库中花青苷生物合成途径中的结构基因和调节基因序列没有同源性，表明用DDRT-PCR的方法克隆特定的AST基因有一定的局限性。 利用图位克隆（map-based cloning）的策略，对拟南芥AST 基因进行克隆。根据拟南芥数据库中的SNPs (simple nucleotide polymophisms) 序列和插入/缺失多态性（insertion/deletion polymorphisms）序列，设计了一系列分子标记。利用这些分子标记，对600个F2代有突变表型的植株进行重组子筛选，完成了对拟南芥AST基因的精细作图，成功地将AST 基因定位到BAC克隆T13M11上。初步确定该BAC克隆中的基因T13M11.8 可能是AST基因。该基因的DNA序列长1432bp，含有6个外显子和5个内含子，编码的蛋白与花青苷生物合成途径中的二氢黄酮醇4-还原酶有较高的同源性。功能互补实验正在进行当中。

The nuclear matrix of Euglena gracilis (Euglenophyta): A stage of nuclear matrix evolution?

Euglena gracilis cell was extracted sequentially with CSK-Triton buffer, RSB-Magik solution and DNase-As solution. DGD embedment-free electron microscopy showed that in the extracted nucleus there was a residual non-chromatin fibrous network. That it could not be removed by hot trichloroacetic acid further supported the idea that it was a non-histone, non-chromatin fibrous protein network, and should be the internal network of the nuclear matrix. After the sequential extraction, the nuclear membrane was removed, leaving behind a layer of lamina; the chromatin was digested and eluted from the dense chromosomes and residual chromosomal structures that should be chromosomal scaffold were revealed. Western blot analysis with antiserum against rat lamins showed that nuclear lamina of the cell possessed two positive polypeptides, a major one and a minor one, which had molecular masses similar to lamin B and lamin A, respectively. Comparing these data with those of the most primitive eukaryote Archezoa and of higher eukaryotes, it was suggested that the lower unicellular eukaryote E. gracillis already had the nuclear matrix structure, and its nuclear matrix (especially the lamina) might represent a stage of evolutionary history of the nuclear matrix. (C) 2000 Editions scientifiques et medicales Elsevier SAS.

Predominant occurrence of apical cell divisions in Oedogoniam pakistanense and its phylogenetic significance

A rare terrestrial species, Oedogonium pakistanense, was first recorded from Hubei Province, south-central China. Morphological characters. including the predominant occurrence of apical cell division and unique lateral apical caps, are described. The growth of the filaments in O. pakistanense from China is usually the result of the repeated divisions of the apical cells and intercalary divisions are rare. It is suggested that this species may represent an evolutionary transition between Oedogonium and Oedocladium, the latter being a terrestrial genus with branched filaments and cell division more often terminal than intercalary.

糯小麦杂交后代的基因型鉴定及Wx基因的效应研究

糯小麦在食品加工业、淀粉加工业及其它工业上有着重要用途，是近年来许多国家小麦研究的重要课题。国外糯小麦选育尚未突破高产与糯性相结合的难点，国内目前还没有培育出高蛋白强筋型的糯小麦品种，这在一定程度上与缺乏合适的育种方法和高效、实用的糯小麦分子标记辅助育种技术有关。国内外对Wx基因效应的研究主要利用缺体－四体系、重组自交系或近等基因系，还未见有利用遗传背景相同的BC5F2代回交改良群体的报道。 糯性位点近等基因系是小麦淀粉品质育种的重要材料，而我国目前还没有一套中国栽培小麦遗传背景的糯性位点近等基因系。为了选育部分糯小麦、全糯小麦和中国栽培小麦遗传背景的糯性位点近等基因系，我们利用Wx蛋白电泳和高效实用的分子标记技术体系来鉴定糯小麦杂交后代的基因型，结果证明该体系能有效地用于糯小麦的分子标记辅助育种。以中国春糯性位点全套近等基因系为研究材料，对小麦Wx基因的6个STS标记和1个CAPS标记进行了筛选，改良PCR扩增条件以及产物检测方式后，从这些标记中筛选出3个标记，包括鉴定Wx-A1、Wx-D1位点的2个共显性STS标记和Wx-B1位点的1个显性STS标记。利用上述3个分子标记从BC5F2 代回交改良群体中筛选出了8种Wx基因型，经卡方检验，其分离比符合3对基因的分离比例，其中基因型为aabbdd的植株有2株，直链淀粉含量分别为1.81%和0.82%，为全糯小麦；基因型为AAbbdd，aabbDD的部分糯性植株各有1株，直链淀粉含量分别为15.24%和17.57%。以上4株植株的农艺性状和品质性状接近回交亲本“川育12”，并明显优于全糯材料“98Y1441”，表明采用回交法与Wx基因分子标记辅助选择相结合，有助于培育高产、优质的全糯和部分糯小麦。同时，本研究中建立的分子标记技术体系，也为选育具有中国栽培小麦遗传背景的糯性位点近等基因系奠定了基础。 在基因型鉴定的基础上，利用糯小麦杂交后代BC5F2代回交改良群体研究了各基因缺失降低直链淀粉含量的效果和各基因合成直链淀粉的能力，以及直链淀粉含量与农艺性状、品质性状、淀粉糊化特性等的相关性。缺失不同Wx基因的8种基因型，直链淀粉含量差异显著。研究单缺失基因型发现，减少效应最大的是Wx-B1b基因，Wx-B1b和Wx-D1b基因没有显著差异，减少效应最小的是Wx-A1b基因。研究双缺失基因型发现，Wx基因合成直链淀粉的能力，Wx-B1a基因最高，Wx-A1a基因最低，而Wx-B1a和Wx-D1a基因差异很小；直链淀粉含量与株高、穗长、小穗数、穗粒数、千粒重等农艺性状相关不显著，表明淀粉品质育种可以与高产育种实现有机结合；直链淀粉含量与SDS-沉降值呈显著负相关(r=-0.726)，说明直链淀粉含量降低在一定程度上有利于提高小麦营养与加工品质，这一结果至今未见有文献报道；全糯类型的淀粉糊化特性与其他类型显著不同，具有最高的峰值粘度和稀懈值，最低的低谷粘度、最终粘度、反弹值、峰值时间、糊化温度、起始糊化温度，表明糯小麦淀粉在食品和工业上具有特殊用途；稀懈值与直链淀粉含量呈极显著负相关(r=-0.969)，其他粘度参数与直链淀粉含量呈显著正相关(最终粘度r=0.797，低谷粘度r=0.910、反弹值r=0.954、峰值时间r=0.970、糊化温度r=0.962、起始糊化温度r=0.932)。以上结论可为糯小麦品种选育和淀粉品质改良提供理论依据。 Waxy wheat is very important in food processing industry, starch processing industry and the other industries, so it is a focus of wheat research in many countries these years. Foreign wheat breeders have not conquered the difficulty of high yield combined with waxy character, and there is no waxy wheat variety with high protein and strong gluten in China at present，all of which were caused by lacking proper breeding methods and effective, applied molecular markers-assisted selection technique at a certain extent. Until now, research about the effect of waxy genes mainly depended on nullisomic-tetrasomic lines, recombinant lines or near-isogenic lines, and it is lacking the reports of using improved BC5F2 backcross progenies under the common genetic background. Near-isogenic lines at the Wx loci are important materials for wheat starch quality breeding. However, there are no such lines under the Chinese cultivated wheat genetic background. To develop partial waxy wheats, waxy wheats and near-isogenic lines at the Wx loci under the Chinese cultivated wheat genetic background, we use SDS-PAGE of waxy proteins and effective, applied molecular marker-assisted selection technical system to identify the genotype of waxy wheat’s progenies. The results indicated that such a system is applicable in waxy wheat’s molecular marker-assisted selection effectively. A series of Chinese Spring Wx loci near-isogenic lines were used to identify the specific bands of six STS markers and one CAPS marker of Wx genes. After optimizing PCR amplification and separating of PCR products, three co-dominant and dominant STS-markers were identified at the Wx-A1, Wx-D1 and Wx-B1 loci, respectively, which were used to identify the genotype of waxy wheat’s progenies. Eight Wx genotypes were developed from the improved BC5F2 backcross progenies, which follows Mendelian segregation. Among them, there were two aabbdd waxy plants whose amylose content in the BC5F3 seeds were 1.81% and 0.82%, respectively. In addition, there were partial waxy plants (AAbbdd and aabbDD) whose amylose content in the BC5F3 seeds were 15.24 % and 17.57%, respectively. Most agronomic and quality traits of these four plants resembled those of the recurrent parent “Chuanyu 12”, and superior to waxy wheat parent “98Y1441”. This shows that backcross approach in combination with molecular marker-assisted selection of waxy genes is helpful to develop partial and full waxy wheat with good traits in the waxy wheat breeding program. At the same time, molecular marker-assisted selection technical system in this paper, also establish the base for breeding the near-isogenic lines at the Wx loci under the Chinese cultivated wheat genetic background. According to the results of genotype identification, we use waxy wheat’s improved BC5F2 backcross progenies to verify the effects of null alleles on reducing amylose content and determine the amylose synthesis capacity of each Wx gene independently, and investigate the relativity among amylose content with agonomic traits, quality traits, starch pasting properties respectively. There was significant difference in amylose content of the eight genotypes carrying different null Wx alleles. The reducing effect of the single null alleles was the most significant in Wx-B1b, followed by Wx-D1b and Wx-A1b, and there was no significant difference between Wx-B1b and Wx-D1b. The results of the double null lines further demonstrated that for the capacity of amylose synthesis, Wx-B1a was the highest, followed by Wx-D1a and Wx-A1a, and there was no significant difference between Wx-B1a and Wx-D1a. Amylose contents of the eight genotypes were not significantly correlated with plant height, spike length, spikelets per spike, grains per spike, 1000-grain weight, which showed that starch quality breeding could integrate with high yield breeding. Amylose contents of the eight genotypes were negatively significantly correlated with SDS-sedimentation value(r=-0.726), which suggested that reduction in amylose content is propitious to improve quality at a certain extent. Starch pasting properties of the full waxy type was significantly different from the other seven types, with the highest peak viscosity and breakdown, and lowest valley viscosity, final viscosity, setback, peak time, pasting temperature and starting pasting temperature. It indicated that waxy wheat starch has special use in food and industry. Breakdown was negatively significantly correlated with amylose contents (r=-0.969), and the other parameters were positively significantly correlated with amylose contents (r=0.797 for final viscosity, r=0.910 for trough viscosity, r =0.954 for setback, r =0.970 for peak time, r=0.962 for pasting temperature and r=0.932 for starting pasting temperature ). The results of the study are very useful for waxy wheat variety breeding and starch quality improvement.

同源四倍体与二倍体水稻的遗传差异及产量、品质性状研究

本文以中国科学院成都生物研究所培育的同源四倍体水稻和二倍体水稻为材料，进行遗传差异及产量、品质性状的研究：1、以二倍体水稻为对照，研究了同源四倍体水稻在2004 年和2005 年的结实情况。结果同源四倍体的花粉育性、结实率均不同程度下降，尤其低代材料更是大幅度下降。F 检验表明，同源四倍体不同个体间的各产量性状均差异显著，说明其具有很大的遗传改良潜力。从1996 年到2005 年对部分同源四倍体水稻进行了连续选择改良，T 检验表明经过9 年的选择改良，其结实率显著提高。本文还对同源四倍体水稻各产量性状间的相关性进行了分析,结果结实率与花粉育性、穗着粒数、穗实粒数极显著相关；理论产量与花粉育性、有效穗数、穗着粒数、穗实粒数、结实率及千粒重极显著相关。i2、用(CT)n 微卫星标记和PCR-Acc Ι分子标记对40 份同源四倍体和14 份二倍体水稻Wx 基因进行研究。结果，(CT)n 微卫星标记检测，Wx 基因呈Wx1、Wx2 和Wx3 3 种多态性；PCR-Acc Ι 检测，Wx 基因表现为G-型和T-型。测定稻米直链淀粉含量(AC)、胶稠度(GC)和糊化温度(GT)，并探讨其与Wx 基因的关系，结果，二倍体和同源四倍体水稻均存在：Wx 基因型相同，AC 差异较小，Wx 基因型不同时，AC 差异较大，Wx1 基因型品种AC 最高， Wx2 基因型品种AC 次之，Wx3 基因型品种AC 最低；基因型相同时，同源四倍体AC 低于二倍体；同源四倍体与对应二倍体间，Wx 基因型相同时，AC 差异很小；而Wx 基因型发生变异时，AC 差异很大。同时，进行相关性分析，结果二倍体和四倍体水稻均存在AC、GC 与Wx 基因密切相关；而GT 与Wx 基因相关不显著。综合分析，(CT)n微卫星标记与PCR-Acc Ι 分子标记检测的相关系数为0.842，呈极显著正相关，可以将其结合起来进行同源四倍体新品种的选育和改良。3、利用RAPD 技术，对同源四倍体和二倍体水稻的遗传差异进行分析。17条引物在同源四倍体中扩增出178 条带（PPB＝81.5%），在二倍体中扩增出173条带（PPB＝76.3%）；同源四倍体和二倍体的Shannon 遗传多样性指数分别为0.4848 和0.4679，多态信息量分别为0.3301 和0.3216，遗传距离分别为0.3572和0.3460；同源四倍体与其对应二倍体间遗传距离为0.1914-0.4633，平均为0.2914。表明同源四倍体的遗传多样性高于二倍体，且同源四倍体与其二倍体之间存在较大的遗传差异，这些将为水稻品种改良和新品种选育提供科学依据。上述产量、品质性状及遗传差异分析的结果，不仅有利于加快同源四倍体水稻的遗传改良进程，而且为进一步研究、利用同源四倍体水稻奠定了初步基础。 AbstractStudy on genetic diversity, yield characters and quality traitsof autotetraploid and diploid riceLiu Yuhua (Botany)Directed by Associate Prof. Tu ShengbinIn this study, diploid and autotetraploid rice, which were cultivated in ChengduInstitute of Biology were analyzed in genetic diversity, yield characters and qualitytraits.In the study, 2 diploid and 29 autotetraploid rice(2n=4x=48) materials, including4 preliminary and 25 advanced generation, were investigated for yield characters.Compared with diploid check, the pollen fertility and seed set of autotetraploiddeclined dramatically, especially in preliminary generation. F-test indicated that therewere remarkable differences among different varieties, showing that autotetraploidmaterials had strong potential for improvement. From 1996 to 2005, someautotetraploid rice had been selected and improved. T-test showed that seed setincreased obviously. The relationships among yield characters of autotetraploid ricewere analyzed. Seed set was strongly correlated with pollen fertility, total grainnumber per panicle and productive grain number per panicle; theoretical yield wasstrongly correlated with pollen fertility, productive panicle number per plant, totalgrain number per panicle, productive grain number, seed set and 1000-grain weight.Wx genotypes of 40 autotetraploid rice and 14 diploid rice were tested by usingthe (CT)n microsatellite marker and a cleaved amplified polymorphic sequence(CAPS) molecular marker named PCR-Acc Ι. Three microsatellite alleles wereproduced, i.e. Wx1, Wx2 and Wx3 both in autotetraploid and in diploid rice.Comparatively, PCR- Acc Ι molecular marker produced two genotypes, G-type andT-type for both autotetraploid and diploid rice. In this study, amylose content (AC), gel of consistency (GC) and gelatinization temperature (GT) of rice grain weremeasured and their relationships with Wx alleles were analyzed. The results showedthat variation of AC between autotetraploid and diploid rice was small when they hadthe same Wx genotype. However, variation of AC turned to be large when the Wxgenotypes were different. Actually, AC met the maximum value in Wx1 varieties andWx2 varieties the middle and Wx3 varieties the minimum. And AC was lower inautotetraploid than in diploid. Correlation analysis was done in this experiment. ACand GC of rice grain were probably controlled by Wx gene or other gene whoselocation was strictly linked to Wx gene, while GT of rice was not. The correlationcoefficient between Wx genotypes which revealed by (CT)n microsatellite marker andPCR-Acc Ι molecular marker was 0.842 with significant level. That revealed aconsistent result between the two types of markers. So it was possible to utilize boththe two types of markers to select and promote germplasm of autotetraploid rice.RAPD molecular markers were used to analyze the genetic diversity betweendiploid and autotetraploid rice. 178 repeatable bands were detected through 17 RAPDprimers with percentage of polymorphic bands was 81.5% in autotetraploid rice while173 repeatable bands were detected with percentage of polymorphic bands was 76.3%in diploid rice. According to the measurement of Shannon index, polymorphicinformation content and genetic distance, genetic diversity of autotetraploid was on ahigher level, genetic variation between autotetraploid and diploid rice was relativelyhigh. All these contributed to the genetic selection and improvement in rice breeding.As mentioned above, the results are not only helpful to promote the process ofrice improvement, but also to confirm the basic for further study of autotetraploid rice.

Fruit anatomy,seed germination and seedling development in the Japanese seagrass phyllospadix

Phyllospadix iwatensis Makino and phyllospadix japonicus Makino have similar frunt morphology and anatomy.The rhomboid fruit of Japanese phyllospadix is dark brown in colour and is characterized by two arms bearing stiff inflected bristles which can act as an anchoring system. The fruit covering consists of a thin cuticular seed coat and pericarp remains mainly fibrous endocarp. In the groove region of the fruit.the cuticular seed coat and endocarp are replaced by nucellus cells with wall in growths and crushed pigment strands with lignified walls.these tissues appera to control the transfer of nutrients to developing seed.the seed is oval with a small embryo and a large hypocotyl. the embryo is straight and simple,with the plumule containing three leaf primordia and a pair of root primordia surrounded by a cotyledon.the hypocotyl has large vontral lobe containing central provascular tissue and two small dorsal lobes.the hypocotyl contains starch.lipid and protein.and acts as a nutrient store.the seed of P.iwatensis has a dormancy period of 2-6 weeks and germination eventually reaches-65%.but is not synchronized.during germination the leaves emerge first.and then after at least three young leaves have formed and abseised.the roots emerge,usually?6 months after the commencement of germination.Utilizaton of the nutrient reserves is initially from the perihpery of the hypocotyl and then progressively towards its centre.

赤霉素、硫脲处理对黄精根状茎和须根发生的影响

为诱导无芽黄精根状茎产生不定芽,选择不同的化学物质进行诱导处理。结果表明,GA3处理效果明显,选用0.4 mg/L的GA3浸泡25 min对黄精根状茎不定芽的产生和须根生长有明显促进作用,高浓度抑制其生长;1%硫脲浸泡处理对黄精无顶芽根状茎萌发新芽和须根有明显的抑制作用。

Synthesis and self-assembly of a novel Y-shaped copolymer with a helical polypeptide arm

novel biodegradable Y-shaped copolymer, poly(L-lactide)(2)-b-poly(gamma-benzyl-L-glutamic acid) (PLLA(2)-b-PBLG), was synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of gamma-benzyl-L-glutamate (BLG-NCA) with centrally amino-functionalized poly(L-lactide), PLLA(2)-NH2, as a macroinitiator in a convenient way. The Y-shaped copolymer and its precursors were characterized by H-1 NMR, FT-IR, GPC, WAXD and DSC measurements. The self-assembly of the PLLA(2)-b-PBLG copolymer in toluene and benzyl alcohol was examined. It was found that the self-assembly of the copolymer was dependent on solvent and on relative length of the PBLG block. For a copolymer with PLLA blocks of 26 in total degree of polymerization (DP), if the PBLG block was long enough (e.g., DP = 54 or more), the copolymer/toluene solution became a transparent gel at room temperature. In benzyl alcohol Solution, only PLLA(2)-b-PBLG containing ca. 190 BLG residues could form a gel: those with shorter PBLG blocks (e.g., DP = 54) became nano-scale fibrous aggregates and these aggregates were dispersed in benzyl alcohol homogeneously.

Electrospun poly(L-lactide)-grafted hydroxyapatite/poly(L-lactide) nanocomposite fibers

Composite fibers composed of poly(L-lactide)-grafted hydroxyapatite (PLA-g-HAP) nanoparticles and polylactide (PLA) matrix were prepared by electro-spinning. Environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM) were employed to investigate the morphology of the composite fibers and the distribution of PLA-g-HAP nanoparticles in the fibers, respectively. At a low content (similar to 4 wt%) of PLA-g-HAP, the nanoparticles dispersed uniformly in the fibers and the composite fibrous mats exhibited higher strength properties, compared with the pristine PLA fiber mats and the simple hydroxyapatite/PLA blend fiber mats. But when the content of PLA-g-HAP further increased, the nanoparticles began to aggregate, which resulted in the deterioration of the mechanical properties of the composite fiber mats. The degradation behaviors of the composite fiber mats were closely related to the content of PLA-g-HAP. At a low PLA-g-HAP content, degradation may be delayed due to the reduction of autocatalytic degradation of PLA. When PLA-g-HAP content was high, degradation rate increased because of the enhanced wettability of the composite fibers and the escape of the nanoparticles from fiber surfaces during incubation.